2006-2008 Toyota Rav4 spark plugs replacement
Вставка
- Опубліковано 5 вер 2024
- 2006 Toyota Rav4 spark plugs replacement. Change every 7 years or 110k miles, whichever comes first.
Tools:
amzn.to/2awcRDO 3/8 ratchet
amzn.to/2aYXnIy 3/8 10mm deep socket
amzn.to/2aJy9kF 3/8 3" extension
amzn.to/2b47h1x 5/8 spark plug socket
amzn.to/2aE11KN Spark plugs 3M anti seize lube
amzn.to/2aCVoJz Ignition coil 3M die electric grease
Parts:
amzn.to/2b8WblB Spark plugs NGK or Denso
Torque specs:
amzn.to/2aDZqER 3/8 Torque wrench
14 ft. lbs - spark plugs
8 ft. lbs - ignition coil bolts
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
bit.ly/nutzabou...
and SUBSCRIBE!
bit.ly/NutzAbou...
Intro: RavenProDesign
www.RavenProDes...
Music: Manic Bloom - Death and Conversation
/ manicbloom
Thank you for an amazing video. I'm 60 and used this to walk me throgh the change. Thanks!!!
Being "old school," I popped the hood , fumbled around for the spark plug wires . . . couldn't find them . . . scratched my head, then, found your demo. Thanks for explaining this "how to." I miss the days when a backyard mechanics like my dad & I, could look at a lot of the issues & using common sense, figure it out. When working on my '72 Plymouth Duster, there was so much room under the hood that I could find everything that needed fixing. But now, there is so much stuff under the hood there is hardly room enough to stick your arm in there to find what you're looking for. They do run better & cleaner now though.
+Robert Johnson yeah, now a days, there's not much wiggle room lol...
My 2008 Toyota Rav 4 started shaking this morning and check engine came on along with the VSC and skid warning lights. Took it to Speedy oil change and they scanned it with their OBD 1 scanner gun and saw a misfire on coil number 4.
They replaced it and recommended doing all 4 now since the others will eventually be bad but I refused it due to budget. They also tuned it up changed all 4 spark plugs. Cost was about $350 out the door 😩
Did this fix the problem, this just recently happened to me while I was driving on the Freeway?
never ever use power tools to remove or tighten a spark plug .
How come?
How do I know if I have a socket wrench that does spark plugs? My grandpa left me a bunch of tools and I need to do my spark plugs on my 2007 rav4, my suv every now and then will start longer then normal or sometimes start rough
Toyota spark plugs use 5/8 socket, the Prius uses 9/16 socket
@@NutzAboutBolts ok thank you :)
@@NutzAboutBolts tune up is done thank you so much!!! My grandpa's socket wrench kit did well , only thing is I would recommend getting a locking socket like yours because mine did come off a few times will doing the spark plugs lol.
@@PartyWolf36790 yeah those spark plug sockets has either a rubber insert or a magnet in them to pull the spark plugs out.
do you know the locations for the cylinders ?
No gap on plugs??
Yeah, I was wondering the same thing. WHat's the correct Gap?
Do you have a video on how to change the rear brake pads?
No, but if you watch any of our Toyota Camry rear brake replacement, it’ll be the same concept.
Do you need to unplug the battery before charging spark plugs?
no
super easy, thank you for this!
Hi, I was wonder where do you find info like torque spec for the spark plugs etc? Thanks.
nickolastiguan you can find them all online sometimes.
nickolastiguan Snug is usually more than good enough the plugs all have crush washers on them, the way to tell when they are correctly tightened without a torque wrench is to use 3/8 " wrench, then start tightening you will start to feel some resistance this is the crush washer being deformed, then continue tightening until you start to again feel a more significant resistance, the crush washer has been deformed to properly seal the plug in its home, you are now good to go.
Tnx man.
What did u apply at the tip ofspark plug ?
Die electric grease
Tnx man.
What compound did u put on the threads?
I used the copper anti seize lube
Tnx
Super helpful video. Thanks much!!
Did you calibrated? If yes what is the right number could you tell me please?
You have to torque it at 25 foot pound. Which is like tighten with your hand.
Do you have to pre gap the spark plugs?
No, some already gapped.
Exactly. You can destroy the tread.
The use of copper grease on the plugs threads is discouraged owing to the possibility of the plug being overtorqued. Otherwise a fine video, thanks.
The Toyota dealership quoted me $239.99 to do this.
I just called a mechanic shop, they wanted $545.00 just to put the coils and plugs in😵💫
Coils are expensive, just do it yourself, it’s all on top lol