RADIUM Fuel Surge Tank Install
Вставка
- Опубліковано 27 сер 2024
- Finally installing the Radium Fuel Surge Tank!!
Fuel Surge Tank (Part# 20-0059-00): www.radiumauto....
Mounting Bracket (Part# 13-0054)
Support the channel 👉 www.LadyBuiltGarage.com
Purchase Merch 👉 www.AlterEgoPerformance.com
Follow me on Instagram 👉 / aisha_ladybuilt
👉 / ladybuiltgarage
Follow me on Facebook 👉 / aishaladybuilt
👉 / ladybuiltgarage
Thank you for watching!
Subscribe for more!
Links---------------------------------------------------------------
Performance Parts👉 www.VelocityShop.com
It's so awesome to see a lady who builds cars! I know there are others, but your channel is FIRE!
Hey Aisha, great walk-through and install. Very informative. Would suggest getting either rubber edging or just cutting some 1/4" hose in half an laying it over the edge of your aluminum bracket that your hoses are close to. As you hit gas and brake those lines will move slightly and abrade against the metal edge. This addition will protect the hoses from the metal edge.
I have so much to learn. I have an 89 Crx street car that I've done EVERYTHING on...but you're teaching so much. Sorry I'm stupid but I honestly mostly paid my buddies to do this stuff for me. You're teaching me to do things myself and I appreciate you more than you know. Thanks 🙏
I'm happy to see that you appreciate the videos :) I try my best to show people that some things are not as difficult as some make it seem, and it's rewarding to try to do something yourself! Thank you!
I am really impressed with doing all of this car work having nails like that. They always look perfect and you put in work girl!!! Keep it up!!
Great video. I've been trying to wrap my head around surge tanks for a little while now, you explained it clearer than I've seen on other videos. Thanks +1!
Very good video. Step by step, good instructions, explained perfectly in detail, and good videography
You could use a small socket to push that clip down
Really well put together video. If you ever need to isolate anything from vibration you can get those rivets in a rubber version, i use them quiet a lot, just gives a little dampening plus they are handy for isolating different materials, your fine there as the steel is painted but you never want bare aluminium and steel contacting each other as they react and corrode
I usually use a socket and a small rubber mallet with a little whack on those clips.
Gotta love a a clean install!!!
Thank you!
I would use a socket that fit the size and tap it
Good job👍
Damn I didnt know you had new videos until I looked up the radium surge tank . Been here since the aerocatch pins video now I'm behind like 10 videos lol
Quite helpful, thanks
Thank you! Glad it was helpful!
Have to imagine you have been using this fuel surge tank for a little while now. Are you happy with it? I was just looking at it and came to YT to look for reviews on it.
Yes, I am still happy with it. I haven't had any issues, and it is such high quality. I'm in the process of putting my car back together after getting it painted, and I'm getting ready to reinstall it ☺
@@Aisha_LadyBuilt Appreciate your reply.
Nice work! I ran across this video searching for solutions for my C10 build. The truck has dual tanks (with selector switch in the cab) and I plan to install EFI on the big block engine that will be installed. Do you think the surge tank will simplify my EFI install?
Awesome video
Thank you!
@@Aisha_LadyBuilt You’re welcome
One of the little quarter inch sockets a little tap tap.😎😎😎😎
Yep, I can see that working
😎😎 yesss bout time 🙏
😁😁 I know right!! 🤣🤣 Thank you as always for watching, and waiting for the next one!!
Your name in Japanese is “Beloved Car” suiting for your hobby :) 愛車 Ai-Sha あいしゃ
I must have missed it. How do u connect the bulkhead fitting to the oem tank
Great Post !
Thank you!!
Nice
Killer video!! Luv how u break it down. 💪💪keep the videos coming !!
Thank you!!! I appreciate the feedback!
sick video! cool to see other women getting shit done, but have you noticed any issues with the hose from your lift pump sliding off by chance? asking because radiums install instructions had mentioned that the hose needed to be seated and pushed ALL the way down, just curious but other than that great job and great video :)
Nicely done lady! I'm gonna follow this route too for my k24. Can you tell what size injectors is this fuel setup supporting? Would it be enough for 2200cc injectors?
Thank you! I’m running 1650cc injectors. I’m pretty sure it would support 2200cc injectors as well. If anything, maybe upgrade to 8an lines.
i have a g37 and it only feels very fast when i have over a half tank. if it gets down to like 1/4 if feels sluggish. i want pressure and this seems like a great way but i really didnt want to buy one of these things and do all that seems like drifters and guys with 800hp need this. i just want to feel like i have pressure to my fuel rail. i saw another video the guy was installing the thing under the seat in the tank i think i mean it just seems like theres got to be a way around all this. if its replace the pump which is 14 years old now and just keep more gas then ok maybe i have a bad part? regulator i have no idea what the pressure is at. its always been this way as long as i can remember if i bought a full tank of gas it felt way faster then when i was below half. noticable everytime. i have no idea why that would be maybe there is air maybe thats how g37s are. for years i always felt like i had to keep a full tank of gas. but thats crazy. i like the whole idea behind this but lets face it im not bolting things to my car. help me out please. maybe theres a practical solution. 2010 g37x
This right here is inspiration....😍😍👍👍 #LBG
When are you making more videos!?!? I miss your videos 😞
I hope your getting hooked up for these pretty decent product overviews.
:)
Very clear and informative video 🙌🏾
Thank you!!!
Hi. Do you have problems with fuel smell inside the car?
Nope, never had that issue. Made sure all the hoses were tightened when I made the lines, and made sure all the connections were tight, and I don't smell a bit of gas smell.
@@Aisha_LadyBuilt thanks for your response. I will check it back. Maybe i need to change the hose to ptfe hose
@@Afnperformance No problem :) .. The PTFE is better for gas than the rubber. Good luck!
Heeeey isha💐❤❤🔥🔥
Hiiiii!
🔥🔥🔥
🙏
Awesome videos Keep up uploading them
Thank you!!!
What fuel are you on?
e85 :)
Love this reviews love all your content
Thank you so much!!
Do you have power steering??
No I don't, neither AC.
Love your car its gorgeous you are a big inspiration
Thank you so much!!
Aisha Lady Built Garage could you please show and explain how you installed the clear view oil filter.. please and thank you
Do you do all modificationd yourself
Yes I do :)
Great video! Where's the next one with the wiring lol. I need it
Aisha Feel Off The Face Of The Earth.... It's been 3 months waiting for a next video ,😥😥😥
Can I film your car when it’s all done?
Would love to work with you and do that!
Btw, I’ve been following along with the build and love how this coming along so far. Planning on doing some of these upgrade to my car as well.
Time for a sponsor to paint your car 😁
For real!!!! LOL
Yes yes. ..😊👍
Shit work
Maybe just maybe at least vacuum and wipe down that pig pen
did u know that your name is arabic and its عائشة its mean alive and its used for woman. عائش not a name mean alive for man
Pathetic just pathetic
Fantastic video! Really great work. One critique, the way your lines are routed under the mount plate, I would just make sure they’re not going to rub on that edge of the plate. Maybe you can make a little bracket or something to keep them from that edge. As far as a tool for that retainer clip, I’ve always just used a little socket. You can just press the clip on with the socket and it’ll push it down evenly. Keep up the great work!!