I would totally buy a leather wallet that said that on one side with the RPM logo on the other! Those orange valvecovers are sick on the orange Camaro, btw.👍🏼
@@wesleybeeson1818 yes that’s my car it’s crystal red tintcoat is the color it’s a 2011 with the cfz package which means carbon fiber package which consist of front splitter side skirts and roof panel are carbon fiber painted black and zr1 rear spoiler color to vehicle ....
How much does a build like this cost?? I’m either planning on building my 10 speed camaro I have now or a 10 speed mustang next. My goals are little over 1000 wheel
Do they call the Camaro color "Dexcool Orange"? They should, because it sure matches what's in the expansion tank ... though maybe that's just the video ...
Just something about a saucy pro charger build and that top end pull. If you have a valve train combo to take advantage of spinning it higher it’s hard to beat for sure.
Well, you can always look at the specs of the supercharger and determine it’s CFM flow map. By determining the size you can figure out what the most power is that it can support.
We hardwire that way we can utelize more of its functions of it as well as read wideband while tuning, since the HP tuners cable needs to be plugged into the OBD2 port.
I have one of the ESS tuning kits making 1030 on e. Just wondering how much power you guys usually gain from meth? My total timing is about 20 degrees with 20#s of boost.
Depends on a lot of variables. Remember, a stronger N/a motor with boost will gain more power per pound of boost verses the same motor with less N/a power. And it depends on how much more timing you can add with the meth with respect to how much horsepower you get per pound of boost. And boost is just a measure of restriction.
Is there any way we can get the est. average build cost? And which Camaro year(s) this can be done. I'd like to find out how much for my 2014 1LE SS bone stock
I've had nothing but problems with UPS even with insurance on the items I've sent out. They seem to be the most trusted delivery service, but i despise them now after the crap they've pulled on me more than once smh.
I cast your videos and they always break up. I was told about the compression upload or something. I don't have problems with the 20 other UA-camrs i subscribe too. Is that my problem?
The KX500 with the kips will gap a CR500. Jeff Ward back in the day would rule the open class on the Kaw! Tell him Steve. The 250s are all close ASF. But if Fran wants to go old school. KX500 will clap a CR500.
lol You're comparing a car that comes with a supercharger stock that's twice the price off the bat. Make 1,000whp with a regular Charger or Challenger and tell me how much it costs.
@@RaceProvenMotorsports I was comparing similar price vehicles in the used market.. both sale for almost the same price. I understand you don't have control on what people bring but for someone to spend let say 45k on a camro and additional 32k for 1k horsepower just seems like they didn't think of any other cars that would be better option at 77k. I'm not saying the hellcat is the go to car but I can think of alot of others for 77k. Either way your shop looks top notch but shit people have 32k to drop on a ss
I've got the Australian version of the SS in a 2009 model. Bit of work done to of but nothing much. I watch all these video's wishing I could do some of the things you guys do to these cars. Dreaming of 850hp haha. I got a terminal illness so i doubt ill see anything like it. #fuckcancer
Yes would like to see dyno pull numbers as Fran stated!
Shoutout to the editor. This channel is so underrated
I gotta say..Jerry has been an excellent addition to the team.
I was thinking how well he's come into his own on camera (which, let's be honest, isn't easy).
It's always cool to see a humble Camaro making more power than a Bugatti Veyron! Absolutely mental :D
That maroon ZO6 on gunmetal wheels with no tint, something about that combination just all works and looks classy.
Yes what is that gm colour exactly?
I would totally buy a leather wallet that said that on one side with the RPM logo on the other!
Those orange valvecovers are sick on the orange Camaro, btw.👍🏼
New favorite build, need to start saving my pennies so I can do one! Awesome great work gentleman.
Them Procharger F1A-94 are putting out some serious power
That blower is a 1,300hp capable design.
@@bri-manhunter2654 trust me I know personally...got a F1A-94 on my Windsor 427ci motor in my '91 Mustang...talk about POWER
@@wood4278. Very fun, and with that 427Ci you will have a lot of N/a power & torque while you are out of boist💪🏻
As soon as Fran talks wreck-less to u I instantly like the video cause there’s nothing u can do about it 🥴😬...
Definitely like the more dyno graphs idea! Let’s see the progress.
Jerry workin on my c6z06 🤘🤘
The dark red? What colour is it exactly?
@@wesleybeeson1818 yes that’s my car it’s crystal red tintcoat is the color it’s a 2011 with the cfz package which means carbon fiber package which consist of front splitter side skirts and roof panel are carbon fiber painted black and zr1 rear spoiler color to vehicle ....
Nice 👍 my 15 camaro is crystal red tintcoat! They look different depending on the lighting. Rarest colour for mine
Rarest For the 2014/15 camaros I mean
@@wesleybeeson1818 ya this color looks dark cause of it being inside then when the sun hit it it’s way lighter
I would love this setup on my 2020 1le with the exception of the e85.
How much does a build like this cost?? I’m either planning on building my 10 speed camaro I have now or a 10 speed mustang next. My goals are little over 1000 wheel
I’m about to send my 2019 2ss camaro to you guys 💪🏾 💪🏾
Do they call the Camaro color "Dexcool Orange"? They should, because it sure matches what's in the expansion tank ... though maybe that's just the video ...
Its called Crush.
Pressure drop on that orange Camaro's air filter has got to be hilarious! Be interesting to see a run without it to see how much it's being choked.
That’s a nice build on that Orange Crush Camaro, but Fran you have to let the Shock Camaro colour grow on you.
It is truly awesome especially in person
Just something about a saucy pro charger build and that top end pull. If you have a valve train combo to take advantage of spinning it higher it’s hard to beat for sure.
Fran definitely has a point. I'd love to see the progression of the numbers.
Badass Work On The Camaro!!
Listen to your tuner, he is 100% right😎
He is right you know id like to see pull power #'s 2nd pull power #'s so on and so forth 💪
Congratulations 👏 I guess I'll have to beat this in March with the zl1 build
Fran is right pull then number s not just the final numbers.. .great vid .that orange is killer sweet ride
That SS 1LE is badass I’d love to build one just like that wouldn’t change a thing that 🍊 is 🔥 🤤
The gauge shots are great Steve!
Fran and Steve are hilarious 😆👍
Yes we would like dyno numbers like fran said. He is right on that one
I work for UPS, we are the best
plz help me out , were the drop ins lowered compression?
I agree with Fran! show each pull! I also want this setup for my car...but I’m in Australia!
Around how much would I need to spend to get numbers like this???
I would like to see hp&tq numbers after all pulls. Fran your the boss, make him do it
Well, you can always look at the specs of the supercharger and determine it’s CFM flow map. By determining the size you can figure out what the most power is that it can support.
Yes, What Fran said..
What pulley are you all running on the procharger?
4.0’ ProCharger, 8.25 lower
Can you make that power on the lt4 injectors on %50 e or do you need the 30% over fic injectors ?
This was on LT4 injectors
Stock internals on the orange camaro?
Insane amount of power.
Is that a money counter in Fran's office. It looks too narrow for a printer.
back left yes
@@mainlymoto9828 what a freaking pimp
What is the fueling on the orange camaro?
You guys need to do like one month a yr to daily vids. I know it's hard but even if ya could do like 20days. That Maro is fire as hell.
When you guy's hook up the P3 do you wire them in or use the obd2 port
We hardwire that way we can utelize more of its functions of it as well as read wideband while tuning, since the HP tuners cable needs to be plugged into the OBD2 port.
Can you drive the camaro as a daily and would it last 100k miles after all those upgrades with out any thing breaking?
The BMF customer is a legend.
Where’s Eric’s mother reprimanding him on speaking of the fedex man as so 😂😂😂
I have one of the ESS tuning kits making 1030 on e. Just wondering how much power you guys usually gain from meth? My total timing is about 20 degrees with 20#s of boost.
Depends on a lot of variables. Remember, a stronger N/a motor with boost will gain more power per pound of boost verses the same motor with less N/a power. And it depends on how much more timing you can add with the meth with respect to how much horsepower you get per pound of boost. And boost is just a measure of restriction.
After a long day time to see cars on dyno
Ok I’m tempted now 🤤
Price for the camaro ss build, install and tune?
We would love to see that Fran awesome ideal 👍🏻👍🏻😂
Fran is just a bad ass! No other way to say it.
The " psh unreal " killed me
Do you guys do this with trucks?
We absolutely can, send us an email sales@raceprovenmotorsports.net
That is one bad a** goldfish
Wondering when the video was going to drop!
Is there any way we can get the est. average build cost? And which Camaro year(s) this can be done. I'd like to find out how much for my 2014 1LE SS bone stock
All prices for our packages are on our website
How much does this build cost would love to get it done on my 2019 camaro 2ss
Prices for all of our packages are on our website.
It only shows for 600 hp package I’m looking for like a pro charger with cams dyno and like 800-950 hp
I agree with Fran
How much would something like this cost to do ?
Wish y’all were in Texas know any people who can help out with builds getting a 2020 or 2021 ss 1le
Yeah. Us…. Ship it. We get cars from Texas all the time
I like Fran dyno idea
Great episode thanks guys👍🏻
The Madden stuff had me giggle every time
Axles on the stage 5 maro?
we listed and talked about all mods, so stock
Yes. Fuck that ps pump bolt. Seriously. Every GM power steering system I’ve worked on has at least one. 😤😤
How much total is that stage 5 package
Depends on options around 30k. Packages are on the website
New guy drive an og Ford lightning?
SHOULD WE PUT MORE "E" IN? Then Frans face! "😒"-😂🤣😂🤣😂🤣
That's his normal face.
these guys are cool AF lol
If I had 600whp more I would have 1000whp in my Buick 🤣
I've had nothing but problems with UPS even with insurance on the items I've sent out. They seem to be the most trusted delivery service, but i despise them now after the crap they've pulled on me more than once smh.
I wonder how much this set up cost??
$30,000
Packages are on our website raceprovenmotorsports.com
Hey Yenko hold my beer.
I cast your videos and they always break up. I was told about the compression upload or something. I don't have problems with the 20 other UA-camrs i subscribe too. Is that my problem?
Never had an issue or anyone say they had an issue either.
1987 honda xr600r craigslist nsahville tenn
Yes show us the #####s!!
I love it my guys rpm keep up the work and I love the video lot and I love Camaro ss
he doesnt want to give away his secrets lol 1000 tho😮
I would like this much power but not for 30k💀
The KX500 with the kips will gap a CR500. Jeff Ward back in the day would rule the open class on the Kaw! Tell him Steve. The 250s are all close ASF. But if Fran wants to go old school. KX500 will clap a CR500.
I don’t know about that. There are multiple videos of them racing. I have a cr500 already. Just want more
32k for this package wow.. I'm making 1k in my hellcat for 9k.
lol You're comparing a car that comes with a supercharger stock that's twice the price off the bat. Make 1,000whp with a regular Charger or Challenger and tell me how much it costs.
@@RaceProvenMotorsports I was comparing similar price vehicles in the used market.. both sale for almost the same price. I understand you don't have control on what people bring but for someone to spend let say 45k on a camro and additional 32k for 1k horsepower just seems like they didn't think of any other cars that would be better option at 77k. I'm not saying the hellcat is the go to car but I can think of alot of others for 77k. Either way your shop looks top notch but shit people have 32k to drop on a ss
I've got the Australian version of the SS in a 2009 model. Bit of work done to of but nothing much. I watch all these video's wishing I could do some of the things you guys do to these cars. Dreaming of 850hp haha. I got a terminal illness so i doubt ill see anything like it.
#fuckcancer
Sorry to hear.
He's 12. 😆🤣😂
KX all day sad are crs...
Jeff Ward Just Bustin balls miss the 500s.
Ride red get head
I finally did it yes 1st
Aaaaaaaaaa I did hahahha
fedex is the worst