2008- 2012 Honda Accord Front Bumper Removal How to Remove Replace Install Sedan 4 door
Вставка
- Опубліковано 12 вер 2024
- Step by step how to remove the front bumper cover on a 2011 2012 Honda Accord Sedan.
Plastic Bumper Clips -- amzn.to/2CMVHBA
Clip Tool -- amzn.to/2GjMioz
2008-2010 4 Dr Sedan Painted Front Bumper V6 W/ fog lights -- amzn.to/3LUQf27
2008-2010 4 Dr Sedan Primed (Not Painted) 4Cyl Front Bumper -- amzn.to/3JOTV3L
2008-2010 2 Dr Coupe Primed (Not Painted) Front Bumper -- amzn.to/3IuMizr
2011-2012 4Dr Sedan Painted Front Bumper -- amzn.to/34WJUD1
2011-2012 2Dr Coupe Painted Front Bumper -- amzn.to/3p8ufHi
Everything in this video works. Only thing I'd add is to be careful about closing the hood once the bumper is off. If you drop down the hood, the latch will not work and you'll have to pop the hood (as normal) from inside the car. Then the latch will work again. The clips linked below work great. Anticipate you'll break - and have to replace - about half the clips you pull out. They become brittle over time. Otherwise the video was a huge help. Thanks!
it's not the bumper that affects the latch, it's the force with which you close it. give it a solid drop from higher than normal and it should close properly with or without the bumper
Steps are precised, short and simple. I appreciate there is no intro before the clip, thanks.
Specs that I found useful to know before and during my bumper removal (I have a 2011 Honda Accord):
1. Number of bottom bumper clips = 10
2. Number of bumper screws = 2
3. Number of upper shield clips = 7
4. Clip measurements: Full Diameter of top = 20 mm; Stem Length = 13 mm, Diameter of clip/hole = 10 mm
Hope this helps someone when they are looking to buy new clips (called retainer clips in stores or online), and when changing the clips out to know how many should go back on.
What’s that black thing when he removed the bumper on the driver side
This video helped so much. Thanks! I had to replace my windshield washer pump and needed to take the front bumper off to access it. Now I know how to do both things!
An issue I ran into though was the 2nd bumper screw wasn't feeling resistance when I screwed it back in. I'm not sure why it's not grabbing anything. I may need to take a closer look at the fender cover and see why it's not gripping.
Hit and run tonight, caught the driver.. (:
Will be making this a project for next Sunday
Absolutely great video with detailed instruction. Many Thanks for a wonderful job !!
You’re the man. Wish me luck
Cheers, man. You made changing my fenders / wings so easy! Appreciate it, 👍 ☘️
you gotta show how to install the new one in these videos too
literally the same thing in reverse
It’s not exactly the same in reverse, I can’t get that screw in
@@clarklarewjones: Also, buy some clips, because some (most of them) will break during their removal.
Not any clips. Get part number from honda dealer. Then buy it on line or from the dealer.
Great job brother - perfect . Now I don’t have to try the silliness of working in the liner inserts.
Well done!
Thanks!
Great explanation- Thanks!
Glad I could help!
@@DIYHonda do you know where the tow points are when you remove the front bumper? I have an accord Crosstour and want to install a bull bar or improved recovery hooks
Excellent!! Thanks man!!
Can you find replacement clips
Do you have any links/recommendations to other sellers? The ones in the links aren't available. Thanks!
Thank you. 😊
You're the best
I’m trying to find that Phillips screw to put back into the bumper, which one is it? Thanks
Thanks!
How i know the clips size is it 10 mm or something else? Thanks
Where the links at??
Where you get prepainted grey one like that it says prime but not colored??
Thanks home boy...🤣🍺
👍
This won't work on the coupe?
Where’s the link? I need to replace my front bumper
I have a v4 2012 sedan and will like to put the 2012 v6 bumper on it will it fit?
It doesn't say direct fit but it should fit. They try to list parts for the 2008-2010 like they won't fit a 2011-2012 but they will, notice how the headlights , hoods and fenders fit all 4 years but the front bumper doesn't ? No, they all fit. You can put a 20122 V6 fog light bumper on the 2012 k24 Accord. Nobody talks about this
@@jakeseidel4566 I've been really trying to verify this information before I buy a v6 bumper for my 2.4l. I appreciate your comment 💪🏽
Can you sale me that one
You only showed hot to replace.. I wanted to know how to install
2017 honda accord lx
Can anyone confirm the link still works to order a painted front bumper? Thanks
Heys guys would a 2008 Honda accord front bumper fit a 2007 Honda accord
Please get back to me and would the 2 right side doors fit?