2010 Honda Accord Weather Strip Window Molding Replacement
Вставка
- Опубліковано 7 жов 2022
- In this video we replace the Window Molding/Weather strip on a 2010 Honda Accord. After 12 years or so its past due replacement. I chose to use a cheaper set from Amazon to see how well they work and how well they fit. So far I am impressed at the quality and the ease of replacement. It takes a little more time on this model because the side view mirror has to be removed before the trim can be removed. Overall it was a lot less time involved than I originally thought. Even trying to record video while doing this with changing my angles to get out of cameras way when possible, it still only took around 15 - 20 mins per side. I will update the first line in this description if any issues come up over the next few years. Hope you find this video helpful and thanks for watching!
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
Amazon Link to 2008-2012 4PC Window Molding Trim Kit if needed:
amzn.to/3Em94dA
Amazon Link to Plastic Trim Removal Tool Set if needed:
amzn.to/3V4L3xg
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
amzn.to/35TETZB
Aftermarket 8V Battery for DeWalt screwdriver if needed: amzn.to/3Ix4euv
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
TOMLOV DM201M with built in DMM if needed: amzn.to/3mnLXZz
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Weller 200W Iron if needed: amzn.to/30nzhT2
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
Jewelers Screwdriver set if needed: amzn.to/3THDqwd
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
GM328 if needed: amzn.to/30rBFrJ
amzn.to/3o6TlZC
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
Atlas DCA55 if needed: amzn.to/2RhrcuP
MESR-100 if needed: amzn.to/2Rkcfbd
150W Load Tester if needed: amzn.to/30i8sn8
M12 Cordless Soldering Iron if needed: amzn.to/35XiFCp
Board Holder if needed: amzn.to/3881akA
Flexible hose arms for helping hands if needed: amzn.to/3KSH6c7
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amt...
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low...
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/pre...
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dua...
NF Mechanic Tweezers if needed:
northridgefix.com/product/mec...
Solder wire 100g 60/40 if needed:
northridgefix.com/product/bes...
NF.Mini Soldering Pen if needed:
northridgefix.com/product/por...
NF V2.3 Microscope if needed:
northridgefix.com/product/mic...
NF.Short Voltage Injection tool if needed:
northridgefix.com/product/pow...
NF Universal Board Holder if needed:
northridgefix.com/product/uni...
NF Adjustable Clamp Arm Stand for camera if needed:
northridgefix.com/product/adj...
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/att... - Наука та технологія
![Lp. Последняя Реальность #97 ЧЁРНАЯ МАТЕРИЯ [Анти Скинт] • Майнкрафт](http://i.ytimg.com/vi/k4MjXCzKsYw/mqdefault.jpg)
I don't usually comment but this is an excellent, thorough, well explained, practical explanation
Thank you for your kind comment!
I absolutely agree, huge help removing the guesswork from those clips!
Agreed well done sir.
I paid 29$ for a set on eBay, and used this video to install. Very easy to understand and organized video, thank you!
Helped so much setting expectations before I did mine! Thank you for such a thorough explanation
Thank you for the exceptionally clear and professional tutorial! Honda just quoted me $500 to change these out. I did it for less than $50 thanks to you!
Great tutorial. Installed mines today. I have a 2010 Honda Accord LX. Only needed to remove the 3 (8mm) nuts to remove the exterior mirrors. The nut you mentioned is a pain to remove, can be easily accessed by removing just the slightest of the plastic trim from the interior door just forward of where the nut is located. Makes access to nut super easy. Thanks for the video.
Best description on install hands down.
really excellent video! It's criminal that you must replace the entire molding piece and can't just replace the rubber piece that is worn!
Wow. Super instructions and professional. This video reduced my anxiety for a DIY project. Thanks
thanks for sharing this how to. this is what makes youtube so great - people all across the world sharing their knowledge. Great stuff. You have definitely inspired me to do this myself.
Good job, thanks for the video. I just replaced my sons 2011 v6 today. He bought it used and it was a Az car for most of its life and extreme heat ate up the weather stripping. Thanks again. It went smoothly thanks to your video.
Thank you for this! This was well explained and the demonstration was very clear. Also, thank you for the tip to use a magnet so that nut doesn't fall in the door. I have my parts ordered now and will be using this as my guide!
Thank you for the guide! It was really easy changing out the weather strip with your instructional video.
I don't normally comment but this was a great explanation. I did this today and it was moderate difficulty thanks to this video. Saved a lot of money.
Replaced my daughter’s trim today. Thanks for the video.
Very helpful tutorial for my 2012 Honda Accord. Thank you so much!
Great video. I appreciate the help. I was scared to do this but now I'll take care of it this weekend
I love ❤how much effort and clear tutorial you have done from beginning to end
Thanks for your kind comment!
The service manual says to slide the clips forward to release them, but this works just fine. Which is just as well, since at least one clip on the coupe is inaccessible with the window in any position, even with the door panel removed.
Thank you so much! You did a great job explaining how to install them 👏 😊
Very well explained thank you I should be able to change mine on my own
Extremely helpful video! Thank you ✨
Thank you so much for this very informative guide.
Excellent video. I just purchased these based on your video. Thank you
Thanks a lot after I watched your videos today I replace them
Thank you so much for this video and the link to the parts!
Great just what I needed to see.
Going to try this myself. Thanks for the thorough video! Xoxo
Short, accurate, to the point!!! Fantastic video.
Thanks so much for your kind comment!
Excellent video, this should work perfectly on my 2010 Acura TL.
Excellent, very helpful. Thank you.
Excellent. Thank you!
thanks so much!! Fantastic tutorial great job
Thank you making video .
I'm done with mine today. thanks
Thank you for the help!
I just did mine on an 09' Accord today thanks to your tutorial and video🙏 thanks so much. (Same under $45 off Amazon)
Back windows are tough and mine doesn't sit perfect on one side in the back, but it's not noticable.
I’m having the same issue only did the passenger side for now but the rear does not wanna sit right
Thank you so much, you made it look easy.
It was much easier than I originally expected it to be. Thanks for your kind comment!
Thank you for the video it was very helpful iam trying to find a video on how to remove the one on top of the door but so far I have found nothing I heard the crome peace on the rear door at the bottom the wide peace was very difficult to remove without damaging it that why I haven't attempted it plus I can't find the new replacement for the top of the doors 👍🏻
Nice job
Great and helpful video. Well explained and simple explanation.
Great video thanks for making it look easy is it any harder on a coupe planning on buying one and the passenger side is falling apart any link for coupe mouldings would be helpful mostly saw mldgs for sedans thanks
@Dartoasis hello unfortunately no the sedan doesn't fit the coupes I ended up buying a 2015 Honda coupe exl and got a great deal on it love this car getting 37mpg to 40 mpg in economy mode in the country sorry wish I had better news
@Dartoasis your welcome
Excelente video, gracias
Thanks mate :)
Thank you sir
Good job…bless you too.
thanks sr
I love your car seats. Wish I have same color too 😢
Great info..I went with OEM parts, a boat load more money.
Does this do the rear little windows as well? It wasn't clear in the video. All my felt strips are bending and peeling up, including the little rear ones. It doesn't show on the link the separation between the windows that roll down in the rear and the felt that is in the stationary rear windows.
Yes it's only 2 strips for each side and it goes all the way under the small back stationary window as well. You can tell at 6:50 in the video. I show it goes all the way under that window that I believe you are referring to.
Best of luck to ya!
Same as below, dont susually comment but thank you, saved me like 500bucks
Man my window trim has been flapping around for months. Very annoying. I finally tried to look it up on UA-cam and found your video. Looks like you have a EX, I have a LX non chrome. I wonder if the trim is interchangeable.
As far as I know they are interchangeable as long as you do have the 4 door. I bought mine based on Accord 8th gen. At least I did not see a variant for EX vs. LX. The ones I ordered looked identical to mine so I did not even think about that honestly.
Anyone know what the Orange pry tool was used to remove the old molding?
I have a link to a very similar pry tool kit in the video description.
Your good at explaining materials... I appreciate that sir
Thanks for your kind comment!
Hey do you know where I can order these replacements? I have a 2011 honda accord and my strips are in need of a replacement badly
I shared a link in the video description for the strips I used on mine. I was thinking all 8th Gen 4 door Accords would be the same, but double check that they list your vehicle in the Amazon description. I only own a 2010 4 door to say for sure. Let me know if the link is no longer good.
After watching the video, suppose I replaced the part in the past and did not marked the clip positions from the original ones I removed cause i didn’t know . Is there a method to ensure correct positioning, or does it not matter since aftermarket position clips are already set? Cause I notice the clips are in the ball park from the one you’re removing.
Thanks once again
Without removing the door panel I cannot say for sure that it doesn't matter. It could possibly be somewhere along the door that they need to avoid maybe. I simply installed in the ballpark and had no issues anywhere that I installed them and no clips hit any part of the interior or affect the window in any way. Hope it helps!
@@ThriftyToolShed thanks, but the replacement one did you had to reposition the clips on them, if I may ask
@@Enigmaafk
I actually did move a few of them to align close to the originals, but it did not seem to matter as long as they were close. Some were already in about the same spot.
@@ThriftyToolShed thank you have a nice day
@@Enigmaafk Thanks! Hope you have a great day as well!
excellent video. however the pry tool method didn't work for me. I just used my hands and broke it out in one fell swoop. Also I had to remove the top door molding/plastic strip on the top/inside of the window to get to that 3rd bolt. wasn't hard
The clips will break easily for sure. I simply tried not to break them if possible in case of issues later with the pieces getting into a window track or something, but some are bound to pop. Hopefully all is well. Thanks for your comment!
@@ThriftyToolShed believe it or not only one broke. I think I may have been using a cheap pry tool. it was not pulling the trim off. I did try exactly what you suggested
Are these the same size on the coupe model?
I believe they are different. I would double check that your model/style is listed as correct before ordering. I only ordered for my model so I cannot say for certain.
@Dartoasis,
The more I look I see some for the Civic coupe, but not any for the Accord coupe. That is so strange. It seems you may have to resort to the dealership for these if no aftermarket ones are available. So weird to me.
+
they need to recall and replace this JUNK part without charge
do you know the link for this mouldings for accord 7 from 2007 year. Iam from UK and cant find aftermarket once,new from ASO are 300 pounds:(
These from Amazon say they fit. To be fair I have no experience with these or the 7th Gen. Just as an example...
amzn.to/49bbWWM
How do you do the inner door felts ? I can't find anything on line.
I have not done the inner felts myself. It seems these don't give as much issue being out of the elements typically. I don't see much information on them either.
I have the same car and the same problem