Thanks for this video. At 1:26 what tool and size did you use to rotate to bring the piston to the top dead center and align the two lines? It looks like you are rotating so smoothly.
Hi thanks for your support. So with the same crankshaft bolt I put it on the crankshaft and with a socket I’m not sure the size at this moment (19mm or 21mm) and extension and a 1/2 in ratchet and turn it over.
I have a 2012 elantra with the same issue. I have 300k miles on the car. A mechanic told me i should consider replacing the engine instead of doing the tensioner job because of the labor cost. But, where I live, I've had a hard time finding someone reliable to get a used engine and install it under 5k (I'm no mechanic but I've seen engines online from $900 on up depending on the mileage). So, I'm pretty handy, do you think it's worth me taking on this job and saving the money or should I leave it to the pros.
How long does it take to complete this procedure? How do I know that the chain needs to be changed? Would you recommend me to do it myself with no experience? Mechanics here want to charge a lot of money, but i feel they are lying to me 😢
well it is a kind of a lot that you have to do and specially if it is your first time you will get more time than usual. I would recomend taking it to a mechanic maybe shop around hopefully you find some good mechanic. But if you are not having any issues with your engine your good for now
j'ai un probléme actuellement comme suite,et j'ai besoin de ces piéces; dent plus arbracam echappement et admision, chaine, rallye, tendeur:hyundai Elantra année 2011
that looks fuckin wrong my guy. the bottom allignment is off by a few teeth. ah it seems between installing the chain and 13:00 you did tighten the slack, but didn't film it
Very nice that you included the distance from the cam to the crank being shorter on once side. I 100% think that’s what I got backwards. Thank you!
Good job buddy 👏 it's good to know it. and yet thanks for sharing the video!
Thanks
Thanks for this video. At 1:26 what tool and size did you use to rotate to bring the piston to the top dead center and align the two lines? It looks like you are rotating so smoothly.
Hi thanks for your support. So with the same crankshaft bolt I put it on the crankshaft and with a socket I’m not sure the size at this moment (19mm or 21mm) and extension and a 1/2 in ratchet and turn it over.
Hi, i have s Kia Forte 2019 same motor but 2.0. make the change of time, but it still does not turn on, should I erase codes first?
Make sure timing is correct and check compression
How cam i get the service manual of 2012 model elantra.?
sometimes you can find the manuals on ebay
ماهو الفرق بين ١.٨ و ٢.٠ فى ماكينة النترا ٢٠١٦
I have a 2012 elantra with the same issue. I have 300k miles on the car. A mechanic told me i should consider replacing the engine instead of doing the tensioner job because of the labor cost. But, where I live, I've had a hard time finding someone reliable to get a used engine and install it under 5k (I'm no mechanic but I've seen engines online from $900 on up depending on the mileage). So, I'm pretty handy, do you think it's worth me taking on this job and saving the money or should I leave it to the pros.
I’ll say if you can do it that good sometimes is better to replace the engine.
Why are these components being replaced? All of them I mean?
Wear
How long does it take to complete this procedure? How do I know that the chain needs to be changed? Would you recommend me to do it myself with no experience? Mechanics here want to charge a lot of money, but i feel they are lying to me 😢
well it is a kind of a lot that you have to do and specially if it is your first time you will get more time than usual. I would recomend taking it to a mechanic maybe shop around hopefully you find some good mechanic. But if you are not having any issues with your engine your good for now
Is it normal for the chain to go down when rotating and clicking
@@josephg8818 I think it is because after replacing everything new still was doing the same thing
@@autothechgarage6268 how did the car run after
@@josephg8818 good
Where your location please
Wow, you don’t even torque it down to factory specifications.
and you don't leave a cock unsucked either huh
j'ai un probléme actuellement comme suite,et j'ai besoin de ces piéces; dent plus arbracam echappement et admision, chaine, rallye, tendeur:hyundai Elantra année 2011
Ebay or Amazon
that looks fuckin wrong my guy. the bottom allignment is off by a few teeth.
ah it seems between installing the chain and 13:00 you did tighten the slack, but didn't film it