Excellent video thanks a million I was going to use a screwdriver. All u hv to do is put ur hand behind under the bumper and push the plastic clip in to release the whole small lightbulb housing 👍👍 nice
Thanks for posting! I also have a 04 Tahoe. one bulb burnt and one house collapsed completely just tonight so I’ll be heading over to Auto zone tomorrow to purchase them. Replacing all to save time and trouble 😁
Coming back to say i appreciate the help! I went to AutoZone just today, found them at 6 bucks each housing! They ended up installing them for me at no cost!
Thx 4 ur video. I have a 2001 Chevy Blazer LT 4x4 the plastic springy clip is located on the top not the side like yours of the lightbulb housing. The bottom has the plastic hook part. I used a curved tweezer to take it apart. Hope this helps someone.
Thank you I just changed all my tail lights brake lights backup lights and while I was doing that I noticed that I did not have a license plate light thought I'd look on UA-cam and yours UA-cam was fantastic I'm going to go tomorrow and pick up some license plate lights I appreciate your video thank you
Thanks for the help. I guess I'm getting old because I just couldn't push that clip loose with my hand. I got under the truck and pushed it with a screwdriver and the rest was quick and easy. The original bulbs were incandescent but I replaced it with an led version. If the led doesn't light up you have to pull it out and turn it around and put it back in. It should out last me. 👍 😆
I couldn't push the clips either but was able to remove the bulb, from watching this, and replace it under the bumper! It just pulled right out just like it did here on top of the bumper. Worked out great! Thanks for the video!!
Great videos thank you sir ,I had a broken one on my 2002 1500 ,41 thumbs down, those people probably don't have a brain, again thank you will order mine from Amazon
THATS THE THING I HAVE 2000 CHEVY BLAZER SAME LICENSE PLATE LIGHT BUT U CAN'T REACH IN BEHIND LIKE YOU DID ITS SEALED UP METAL STEELE ALL AROUND IT ALREADY TRYED that seems I'll have try pop it out from outside bumper
It's getting harder to find videos like this for my '04 Silverado 2500hd. Thanks for being here, and for saving me a bunch of time!
Glad I could help!
Thank you! And I was worried for a second that you wouldn't show how to take one out that wasn't broke. So glad you did, I appreciate it!
Great demonstration. Good communicator without additional talking.
Excellent video thanks a million I was going to use a screwdriver. All u hv to do is put ur hand behind under the bumper and push the plastic clip in to release the whole small lightbulb housing 👍👍 nice
Thanks! Literally needed to know how the housings come out without breaking them. 👍🏻👍🏻
Thanks for posting! I also have a 04 Tahoe. one bulb burnt and one house collapsed completely just tonight so I’ll be heading over to Auto zone tomorrow to purchase them. Replacing all to save time and trouble 😁
Coming back to say i appreciate the help! I went to AutoZone just today, found them at 6 bucks each housing! They ended up installing them for me at no cost!
I couldn't even find the part until I came to this channel. Thanks!
Thx 4 ur video. I have a 2001 Chevy Blazer LT 4x4 the plastic springy clip is located on the top not the side like yours of the lightbulb housing. The bottom has the plastic hook part. I used a curved tweezer to take it apart. Hope this helps someone.
Thank you I just changed all my tail lights brake lights backup lights and while I was doing that I noticed that I did not have a license plate light thought I'd look on UA-cam and yours UA-cam was fantastic I'm going to go tomorrow and pick up some license plate lights I appreciate your video thank you
Great video- I changed my bulbs to led and they look super nice now too. 👍
This process also worked on my 2003 GMC Sonoma. Thanks for the valuable tip!
The bulb watching you replace the housing 🥵
And you are watching the bulb watching the housing...👽
Simple and straight to the point
Clicked one vid...7 min...WHY that long ?
Thanks for the help. I guess I'm getting old because I just couldn't push that clip loose with my hand. I got under the truck and pushed it with a screwdriver and the rest was quick and easy. The original bulbs were incandescent but I replaced it with an led version. If the led doesn't light up you have to pull it out and turn it around and put it back in. It should out last me. 👍 😆
I couldn't push the clips either but was able to remove the bulb, from watching this, and replace it under the bumper! It just pulled right out just like it did here on top of the bumper. Worked out great! Thanks for the video!!
Dorman is a good brand name for replacement parts.
Thank you very much for your generosity!
Thx for the video now I can do it myself !! 👍👍👍
thanks buddy this was a big help
Thanks for the help quick and easy!
Great videos thank you sir ,I had a broken one on my 2002 1500 ,41 thumbs down, those people probably don't have a brain, again thank you will order mine from Amazon
Thank you
Great vid!! Very informative. Thanks!
Thanks man
👍
Thank you for this post
Quite useful thank you!
THATS THE THING I HAVE 2000 CHEVY BLAZER SAME LICENSE PLATE LIGHT BUT U CAN'T REACH IN BEHIND LIKE YOU DID ITS SEALED UP METAL STEELE ALL AROUND IT ALREADY TRYED that seems I'll have try pop it out from outside bumper
Good looking out bro
Thanks, I needed that.
Dorman is an old company. Known for automotive fasteners, nuts and bolts.
great stuff!!
I wanna know why my left side light works but the right side don't like no power in the socket or something
That was a quick fix
Easy fix
Do they make one in chrome or fake chrome?
probably...
68150
What the hell why can I never find the exact video I’m looking for??? Can someone send me a similar video but with a 1994 Chevy Silverado
Just needed to take it out for reasons 😅
That looks like a Connecticut license plate
Group torero
Thank you