With as much as you guys do this, you should consider a battery caddy. I would build a cart with some wheels and welding cables with eye bolts so you can bolt direct to the starter. Big enough for 4 batteries would let you put two (low amp) into the chasis.
Excellent idea but don't stop there, set it up for 6, 12 and 24 volt! With some home made warning stickers... "WATCH YOUR POLARITY" and "IS THIS A NEGATIVE GROUND SYSTEM?"
The ambulance service I used to work for had battery caddy on a golf cart with a float charger. The central office had about 30 ambulances that still managed to go dead even when plugged in.
I like how it bolts in his face and hank starts laughing that had me laughing pretty hard and its funny his when he started and starting mooing 17:29 17:30
Just get it started, I pulled a rice cart in the rice fields when I was 15 years old and making 16.00 per day, back in 1978! That Steiger was a badass tractor backyard in the day! 👌🏻🤙🏻🤙🏻
Hank you and Whilley never give up that was a runner and it ran that was fantastic that was a combat engine more blood coming from you guys then it was running but you beat him and it ran the birds were safe in the making of this video great job guys and made my day.
Man I love y'all's adventures. I man can tell when two fellas are cut from the same cloth you and Wylie are like two 50 series batteries in a diesel soaked battery box. Hooked up parallel. Love y'all. Thanks for sharing y'all's adventures.
Always enjoyable watching you two getting stuck in starting all these equipment. The banter between you guys makes it better to watch lol. Cheers gents from down under
@@allensnook7760 I'm glad you asked because I misspelled "intimate" interview with Doug Steiger, Witch is the founder of Steiger. And Hamilton Farm is mint.
I sure enjoy watching and listening to you lads bringing old iron back to life. Would like to see it up and working again when that happens if you can.
Hank, y'all know we all ❤️ you, but put a leash on Willie sos he don't get away. Y'all are perfectly matched and fun teasing between you two cracks me up. It's like working with my buddies, we tease.👍👍👍👍
Good job Hank and Wiley I would say ole sparky but that's the electric chair lol you guys got this running with a bird nest in the disconnected exhaust lol awesome farm find. Shows you never know whatcha gonna find doing these things 👍🤣😂
i got a tip for you when using ether on a diesel crank the engine over first then spray it in the intake. if you look when you where trying to start it around 19 minuets you can see the fan turning the wrong way against the starter. thats because the ether combusted but it combusted before tdc forcing the engine the wrong way. when you crank the engine over first then spray it the waght of the flywheel helps the starter overcome the pressure of the ether pushing the engine the wrong way.
9:56 The pulley is a much shorter radius from the rotational center of the pulley's shaft so you won't notice movement as much as you do from the end of the long fan blade. The difference in arc length of 1 degree of movement at 1" from the center of the shaft versus 24" from the center of the shaft is 24x...
This was a other great video I love all you're video and can't wait every week to see one ❤️ and still be amazed how you can get it to run only the singing this time was a extra bonus but you're are great mechanics God bless Thanks for this entertainment
Wow. Thanks for another super super video. Most interesting and enjoyable. Wow and wow and wow. You two worked really hard getting this one going. It was stubborn but in the end you two got it going. Glad the motor will have a second life. Hats off to Hank and Wiley and your friend that came to help. My compliments to all of you. Good job done. You both take care and be safe. Looking forward to the next video. Thanks for everything. Retired Air Force veteran. Steve.
There might be a clod of soil down at the bottom of the flywheel that was holding it solid, after you showed us the flywheel teeth all plugged up with dirt, that gave me that idea. Didn't know you had a mule kick Hank, that was pretty good! Might have to look for another intake boot for the customer now, but I have faith in you 🙂
Load up that turbo with penetrating oil through the oil line connection and you might be able to save it. It didn't look sloppy in the video, just hard to turn. Anyway great job on it!
My goodness, you guys sure manage to get a variety of older machines running. Sometimes with just a little TLC us old folks can do it like in the good ole days.
Great job that you could bring that old steiger back to life so it can be saved . It wouldnt take much to make it a working tractor again and its cheap power in this day and age
Great job, you got that engine going. This was a pretty tough one. The battery set up was perfect, love it ! That starter solenoid needs some cleaning and bit of lube so it doesn't get stuck.
FORGET alternator belts, the RATS in the bell housing are pushing the flywheel opposite your direction everytime they see the bar slide in where you took a chunk of their roof out.
Those green Steigers are some of the best tractors ever built, Imagine the codes a red Steiger would throw if you tried to start one like this :D The Green ones were from a better time, when the engineers were in charge, not the accountants :( Also I don't care what the salesmen say, I reckon a 525 Tiger would pull a 600 QuadTrack backwards, especially with modern Tyres, all without needing 15 software updates and 10 annual subscriptions to login and start it :P
I’m sure you fellers have gotten comments about this but if you get some trans fluid into the cylinders and let it sit for a bit it will break lose easier and do less damage to the cylinder walls when it finally does break lose. But I’m loving these videos none the less.
You remind me of my mom from Tennessee.... One day I was listening to House of the rising sun by The animals their version Eric burdon..... When my mom comes in singing it.... And I said I didn't know you liked rock and roll.....she said do you think that is the first time that songs ever been done..... and she starts telling me all the different versions of it all the way back to the 1800s... Hank Williams..
That engine, and most other engines spin clockwise when looking at the pulley end of the crankshaft. Some Honda, and several marine specialty engines are the beginning of the exceptions. The flywheel housing of that Cummins will have a covered hole where you can insert an engine turning tool that a person would us a breaker bar or ratchet on. The bell housing full of dirt is a partial indication that the inspection cover at the bottom was left off, which allows the spinning clutch to act like a vacuum cleaner while the engine is running. This leads to not being able to adjust the clutch for wear, and I promise that that one has a bad case of stuckage. I’m not talking about the discs stuck to the pressure plate and flywheel, and there may be a large dose of that too. I remember when tractors like that were common to a few of our neighbor farmers when I was younger, and the few new ones at the dealers. New starter? Delco Remy 8200308 gear reduction and lighter than the steel 42MT that came out.
Looks like an MT40 starter...i have some very painful memories of changing one of those out in single digit temps. My hands hurt just thinking about it
Hi from uk guys👋👍 man o man guys this one was the funniest session in a long time 😂😂 but what the hell did I just witness🤔 live wires, shorts, fire, and the birds in the stack😂 I thought was a belt squeal but wen you poked into stack and they looked up as if to so ""do you mind🤔😂"" excellent work and a very impressive effort on this one gents 👌👍 thanks for your time and be safe see you soon guys👍👋
Way back in the day I worked at a warehouse on the apron at the old Lincoln AFB. The Nebraska Tractor Testing Lab was doing the testing on a Steiger Tiger and they had all the testing drags hooked up and a couple of other tractors. Quite the parade. That was, I think, the 600 horsepower version. The reason they weren't at the test loop was it wasn't big enough.
@@nellsonstout7001 Thanks, I heard that that was the power and now I know for sure. That thing was towing a lot of stuff to get enough load on it to peak it out.
Why did you pour Marvel Mystery Oil on the rocker arms? Wouldn't regular oil lube better? And, wouldn't it be better to get the MM oil inside the cylinders somehow, instead of having it just run down into the crankcase?
At 6:04, Hank demonstrates proper "Shade tree mechanicin'" YESSSSS! Hey, ya gotta know how to do it! Be as comfortable as you can in difficult spaces :)) Mechanical design that just doesn't make good sense: "Engineer stuff" - Wiley!!! "IT'S ALIVE" - Dr. Hankinstein with the help of his trusty companion Wileygor
Great video, I would have never thought dumping the oil over the valves. I have a old John Deere 4010 diesel that has a locked up engine I'm working on and I was trying to get the injectors out and can't seem to get them out so I may try pulling the valve cover and dumping the oil in the way you guys did and give it a go to free it up.
▶️Watch part 1 here: ua-cam.com/video/w_j6y4V_-Sc/v-deo.html
Bet all them belts are rust welded to pulleys but she’s turning she’s going to need some work but it will be worth it
Also Cummins can be ran without power to fuel solenoid by turning screw in
@@hellknight2500hd é um Cummins??
Quantos hp??
With as much as you guys do this, you should consider a battery caddy. I would build a cart with some wheels and welding cables with eye bolts so you can bolt direct to the starter. Big enough for 4 batteries would let you put two (low amp) into the chasis.
Excellent idea but don't stop there, set it up for 6, 12 and 24 volt! With some home made warning stickers... "WATCH YOUR POLARITY" and "IS THIS A NEGATIVE GROUND SYSTEM?"
The ambulance service I used to work for had battery caddy on a golf cart with a float charger. The central office had about 30 ambulances that still managed to go dead even when plugged in.
The most reliable thing about a battery is that they will go flat at the worst possible time, new or not.
Fantastic idea!
I like how it bolts in his face and hank starts laughing that had me laughing pretty hard and its funny his when he started and starting mooing 17:29
17:30
What a Machine!! That was a ton of fun!
For sure. Thanks for the comment buddy
Just get it started, I pulled a rice cart in the rice fields when I was 15 years old and making 16.00 per day, back in 1978! That Steiger was a badass tractor backyard in the day! 👌🏻🤙🏻🤙🏻
Thanks Hank and Wiley for a great job best entertainment I've seen all day thanks again
Thanks buddy
You two are closer to being mechanics than singers. 😁 Keep the great videos coming. God bless you!
Oh lawd!!!
They aren't singers. They're sangers!
Hank you Guy's are the best, that was great, I smiled when I seen that baby crank. Great video as always!
Thanks buddy!
You are very welcome!
Awesome to see you two give it another shot! These old tractors are sick! Thanks for another awesome video and God bless
Thanks for watching!
The old big tractors are great no computers either.
I'm enjoying your vids guys.
Thanks!
Well done what a result and no baby birds were harmed in the making of this film 👍👍👍
True😁
Hank you and Whilley never give up that was a runner and it ran that was fantastic that was a combat engine more blood coming from you guys then it was running but you beat him and it ran the birds were safe in the making of this video great job guys and made my day.
Thanks buddy
Thats awesome guy's, never thought,after part 1, that the old beast would crank
I love watching you guys bring back old motors to life. I am an old sailor from the early 70's.
Thanks
Thanks for your service
Man I love y'all's adventures. I man can tell when two fellas are cut from the same cloth you and Wylie are like two 50 series batteries in a diesel soaked battery box. Hooked up parallel. Love y'all. Thanks for sharing y'all's adventures.
Lol. Thanks for watching!
Always enjoyable watching you two getting stuck in starting all these equipment. The banter between you guys makes it better to watch lol. Cheers gents from down under
Cheers mate
Well done guys and thank you for trying again to start this tractor and taking us along on this journey, God Bless! 🙂
Thanks for watching buddy!
Man yeah!! Probably the best video yet. You guys are great an God bless you both.
Thanks buddy!
I just watched the Inmate interview with Doug Steiger this morning, it's a really good story. Good vid again guys.
What relationship does that have with this machine just curious.a hamilton farm fanatic?
@@allensnook7760 I'm glad you asked because I misspelled "intimate" interview with Doug Steiger, Witch is the founder of Steiger. And Hamilton Farm is mint.
She was being stubborn but in the end she was makin oil and decided to cooperate. Well done fellas
That’s right
I sure enjoy watching and listening to you lads bringing old iron back to life. Would like to see it up and working again when that happens if you can.
👍
Hank, y'all know we all ❤️ you, but put a leash on Willie sos he don't get away. Y'all are perfectly matched and fun teasing between you two cracks me up. It's like working with my buddies, we tease.👍👍👍👍
I came for the tractor repairing and stayed for the singing and good natured banter. Nice job.
Lol. Thanks!
Good job Hank and Wiley I would say ole sparky but that's the electric chair lol you guys got this running with a bird nest in the disconnected exhaust lol awesome farm find. Shows you never know whatcha gonna find doing these things 👍🤣😂
no matter what vehicle or how old it is you still manage to start you guys are awesome keep up the good work👍👍👍👍👍👍👍👍❤
You two guys (the Dynamic Duo) are simply amazing. I must confess, I really didn't think you were going to get it running. Enjoyed as always.
Lol. We just get bigger hammers 😂 always enjoy your comments Terry
i got a tip for you when using ether on a diesel crank the engine over first then spray it in the intake. if you look when you where trying to start it around 19 minuets you can see the fan turning the wrong way against the starter. thats because the ether combusted but it combusted before tdc forcing the engine the wrong way. when you crank the engine over first then spray it the waght of the flywheel helps the starter overcome the pressure of the ether pushing the engine the wrong way.
9:56 The pulley is a much shorter radius from the rotational center of the pulley's shaft so you won't notice movement as much as you do from the end of the long fan blade. The difference in arc length of 1 degree of movement at 1" from the center of the shaft versus 24" from the center of the shaft is 24x...
Don't waste your time w these idiots.
This was a other great video I love all you're video and can't wait every week to see one ❤️ and still be amazed how you can get it to run only the singing this time was a extra bonus but you're are great mechanics God bless
Thanks for this entertainment
that was one of the best will it starts ive ever seen keep up the great work guys
We appreciate that. Thanks
Wow. Thanks for another super super video. Most interesting and enjoyable.
Wow and wow and wow.
You two worked really hard getting this one going.
It was stubborn but in the end you two got it going. Glad the motor will have a second life.
Hats off to Hank and Wiley and your friend that came to help.
My compliments to all of you.
Good job done.
You both take care and be safe.
Looking forward to the next video.
Thanks for everything.
Retired Air Force veteran.
Steve.
There might be a clod of soil down at the bottom of the flywheel that was holding it solid, after you showed us the flywheel teeth all plugged up with dirt, that gave me that idea. Didn't know you had a mule kick Hank, that was pretty good! Might have to look for another intake boot for the customer now, but I have faith in you 🙂
Lol. We took care of him 👍
Hank and Wiley sings. I would buy that album for a buck! 😆 Keep up the fun times, guys!
Oh good lawd!!! Your ears would bleed 😂😂
@@HamiltonvilleFarm 😆
Damn that was cool!! I was sad when you guys found it stuck in the first video. I love those old tractors!!
Load up that turbo with penetrating oil through the oil line connection and you might be able to save it. It didn't look sloppy in the video, just hard to turn. Anyway great job on it!
My goodness, you guys sure manage to get a variety of older machines running. Sometimes with just a little TLC us old folks can do it like in the good ole days.
That’s right!
Sweet music when she finally came back to life great job 👌
Great job that you could bring that old steiger back to life so it can be saved . It wouldnt take much to make it a working tractor again and its cheap power in this day and age
Yeah he’s supposed to load it up soon and work on it
love your videos out here in california. sounds like you got a good group of guys. god bless you all.
Thanks much
Great job, you got that engine going. This was a pretty tough one. The battery set up was perfect, love it ! That starter solenoid needs some cleaning and bit of lube so it doesn't get stuck.
Wow great job guys getting that thing unstuck and running and it runs ok again nice work fellas and God Bless....
Thanks 🙏
What is going one there?
I don't recall Wylie ever getting musical before!
Hank the 'I used to think you was crazy' joke was worth a chuckle!
😂
That was awesome to see. What a monster!
Thanks buddy.
Hank you and Will never stop amazing me, love watching the equipment come to life, or back to life. Keep it going.
Man you guy's are just getting too professional now , great job 👍👍🇺🇸
Lol. Thanks for watching!
Love to see you guys coming back on this piece of fine machinery
Right on. Should be able to film loading it here soon
Great show good music great people thank you Hank and Wiley have a great weekend
Thank you Don
FORGET alternator belts, the RATS in the bell housing are pushing the flywheel opposite your direction everytime they see the bar slide in where you took a chunk of their roof out.
Great job getting it broke loose take care and God bless
Thanks
Glad you got it fired up. Somewhere there is a stuck Farmall that needs pulled out.
Glad to see it up running again must b the most difficult 1 to get going as yet Well done guys keep up the good work
Thanks 👍
Those green Steigers are some of the best tractors ever built, Imagine the codes a red Steiger would throw if you tried to start one like this :D The Green ones were from a better time, when the engineers were in charge, not the accountants :( Also I don't care what the salesmen say, I reckon a 525 Tiger would pull a 600 QuadTrack backwards, especially with modern Tyres, all without needing 15 software updates and 10 annual subscriptions to login and start it :P
BS & $$$$ .... perverse minds
Wild old rig, all the best to yous and your loved ones
I giggled for 3 minutes after the “I thought you were crazy…” comment, once it sunk in! 🤣
Lol
Love watching these videos. a great job yall, thanks for bringing us along this journey again.
Thanks buddy !
,,¶¶¶
Great video always excited to see you two working together
Thanks 🙏
I saw the donkey kick going like that from a mile away and that somehow made it even more funny
That was entertaining!
I laughed with you guys through the first half of the video.
👍🏼😆🤣
Right on
The most fun a fella can have!! Still the best content, always makes my day! A dedicated follower.
Thanks much
I couldn't contain my laughing when your foot went through that turbo pipe 🤣 thank you sir I needed that today!
👍😂
Well done chaps I did not think it would run
I’m sure you fellers have gotten comments about this but if you get some trans fluid into the cylinders and let it sit for a bit it will break lose easier and do less damage to the cylinder walls when it finally does break lose. But I’m loving these videos none the less.
You remind me of my mom from Tennessee.... One day I was listening to House of the rising sun by The animals their version Eric burdon..... When my mom comes in singing it.... And I said I didn't know you liked rock and roll.....she said do you think that is the first time that songs ever been done.....
and she starts telling me all the different versions of it all the way back to the 1800s... Hank Williams..
Crack the drain plug and check for coolant.
,Turn the engine by the acce as sorry drive...
That was one of the more difficult jobs. Good going!
3:59…Hank, good luck at the All Valley Karate Tournament. You are ready to defeat Johnny Lawrence! Another great video. Really appreciate these
😂
Thanks for showing I have done that stuff and it’s a ton of work and trying to get a video angle no thanks good job
Awesome to hear that beast fire up! Keep up the awesome work guys!
Thanks much!
Great video hank and whiley great to see the engine going great fun to watching cheers you guys can't wait to see next adventure what happens
Thanks much!
The air intake is like thatto keep it away from the exaust, that way it dont suck in its own exaust fumes.
Lol the donkey kick
I’m basically a third degree black belt. 😂
Nice start for the old beast that is impressive 😄😎
Thanks 👍
Good stuff. Man do power tools make life so much easier
For sure
That engine, and most other engines spin clockwise when looking at the pulley end of the crankshaft. Some Honda, and several marine specialty engines are the beginning of the exceptions.
The flywheel housing of that Cummins will have a covered hole where you can insert an engine turning tool that a person would us a breaker bar or ratchet on.
The bell housing full of dirt is a partial indication that the inspection cover at the bottom was left off, which allows the spinning clutch to act like a vacuum cleaner while the engine is running. This leads to not being able to adjust the clutch for wear, and I promise that that one has a bad case of stuckage. I’m not talking about the discs stuck to the pressure plate and flywheel, and there may be a large dose of that too.
I remember when tractors like that were common to a few of our neighbor farmers when I was younger, and the few new ones at the dealers.
New starter? Delco Remy 8200308 gear reduction and lighter than the steel 42MT that came out.
Good job guys you worked hard on this will it start really enjoyed this video appreciate them a lot 👍
Thanks Benjamin
Looks like an MT40 starter...i have some very painful memories of changing one of those out in single digit temps. My hands hurt just thinking about it
Loving the videos I have been watching all of the will it start videos LOVE them all keep up the amazing UA-cam videos!
Thank you. Would love for you to watch all the ones we put out. We have a lot of fun!
That's a mean lope,badass as always hank my man!!!!
Excellent video Hank :) & Wiley :) and it alive and well to for sure possible but working on farm soon to!
Calling someone stupid is one thing but saying you can see their nuts is a worry bro. Hay great video as always guys. Safe travels
Awesome video, that's awesome it finally cranked up and it sounds good!
I love reserecting old dinosaurs
Need a longer pipe there laddie!!!! We had a 6' pipe that we used when we were doing suspension work on the big trucks.....lol
Great video. I like the Hamiltonville Farm crescent wrench intro. UA-cam showed me a crap ton of ads. Is that within your control?
Yeah, let me go back into the backend and see about that. Thanks for the heads up
Hi from uk guys👋👍 man o man guys this one was the funniest session in a long time 😂😂 but what the hell did I just witness🤔 live wires, shorts, fire, and the birds in the stack😂 I thought was a belt squeal but wen you poked into stack and they looked up as if to so ""do you mind🤔😂"" excellent work and a very impressive effort on this one gents 👌👍 thanks for your time and be safe see you soon guys👍👋
Glad you enjoyed it. It was fun to make
@@HamiltonvilleFarm 👌
I bet those birds were freaking out when it finally started!!! 🤣🤣
Yeah for sure. Lol. Bless their hearts. Hopefully momma came back soon after and hooked them up with some worms😊
It lives again, well done guys.
Leverage is our friend. one of the first lessons as a mechanic.
Just don't consider moving to Nashville right yet and GOOD job! GBWYall!
😂
What are you dumping the oil on? What do you think is stuck in this engine? Certainly not the rockers.
Would love to see one of those old Steigers do a weight pull?
Right on!
Way back in the day I worked at a warehouse on the apron at the old Lincoln AFB. The Nebraska Tractor Testing Lab was doing the testing on a Steiger Tiger and they had all the testing drags hooked up and a couple of other tractors. Quite the parade. That was, I think, the 600 horsepower version. The reason they weren't at the test loop was it wasn't big enough.
@@kenore4003 there never was a 600 horsepower tiger. The series 3s were 450 or 470 and the 4 was 525
@@nellsonstout7001 Thanks, I heard that that was the power and now I know for sure. That thing was towing a lot of stuff to get enough load on it to peak it out.
Why did you pour Marvel Mystery Oil on the rocker arms? Wouldn't regular oil lube better? And, wouldn't it be better to get the MM oil inside the cylinders somehow, instead of having it just run down into the crankcase?
What an awesome piece of equipment
Indeed
At 6:04, Hank demonstrates proper "Shade tree mechanicin'" YESSSSS! Hey, ya gotta know how to do it! Be as comfortable as you can in difficult spaces :))
Mechanical design that just doesn't make good sense: "Engineer stuff" - Wiley!!!
"IT'S ALIVE" - Dr. Hankinstein with the help of his trusty companion Wileygor
Lol
LMAO, and I thought my mind was twisted. Love the nuts joke. Keep up the great work
Great video lads ,the beast is alive.!
Nice work Hank!! 💪🏽
That engine had two beavers and a chipmunk living in It.
Great video, I would have never thought dumping the oil over the valves. I have a old John Deere 4010 diesel that has a locked up engine I'm working on and I was trying to get the injectors out and can't seem to get them out so I may try pulling the valve cover and dumping the oil in the way you guys did and give it a go to free it up.
We don’t know what we’re doing 😂 we just get lucky
If y'all wanna come out to Arizona you can do a video on the Deere 4010 lol
Excelleny video I enjoyed watching it i need a big tractor like that to push canetrucks in 🇧🇿 Belize
Another successful start up!! 😁 I know this goes without saying, but ya'll be careful! 🏥👍👍