Hey Dale, we no longer operate a DIY parts store. We chose a few years ago to just focus on our own products and we no longer stock this part. It's made by Marinco. You should be able to find it on Amazon for about $10-15.
Two of my Musitronics pedals won't operate from a DC power supply. If I add a AC power inlet to the DC power supply, will that enable the DC power supply to operate my pedals?
hey I'm wondering, is it possible to do this with a Donner DP-1 power supply? it has a DC input with and AC adapter. Or what could i use to make it work. Thanks.
What might be the reason why you specify mounting the power supply centered within the board? I had been thinking of mounting my Voodoo ISO-5 top left by the AC inlet (around 4" from the inlet), rocker switch (direct left of inlet) and bayonet lamp (#47 - about two and a half inches from ISO-5). Do you think I'll have any issues with this?
I'm thinking of adding the ac inlet and rocker switch on my board - but is there a particular plug that plugs into the ac inlet from outside of the board?
Yes. Typically when we do that, the easiest way is to use the courtesy outlet on one power supply to power the other power supply with a 1ft IEC cable. However, 4x4s don't have the courtesy outlet, so you can either get a splitter cable, or wire in a power strip and use 2 1ft IEC cables
Very informative video and beautiful work. Your camera man is making me sea sick though.
Sorry about that. I know he was having a little trouble standing so long. Glad you like the work though!
Thanks for having a good day. I needed that laugh today. Thanks for the joy! Great video!
I tried to follow the link for that AC inlet connector but can't find it. Any idea where I can find it? What a great video!
Hey Dale, we no longer operate a DIY parts store. We chose a few years ago to just focus on our own products and we no longer stock this part. It's made by Marinco. You should be able to find it on Amazon for about $10-15.
@@Creationmusiccompany that's great. Thank you for that and I love the website.
Thanks for having a good day
😔
If I want to use an AC inlet instead of the IEC, but still want to wire the rocker switch the same as in your other video, will that work?
Awesome video, subscribed! Lovely wood on that board
Two of my Musitronics pedals won't operate from a DC power supply. If I add a AC power inlet to the DC power supply, will that enable the DC power supply to operate my pedals?
Great video, thanks. Tried to find the products on your website but they aren't there???
hey I'm wondering, is it possible to do this with a Donner DP-1 power supply? it has a DC input with and AC adapter. Or what could i use to make it work. Thanks.
What might be the reason why you specify mounting the power supply centered within the board? I had been thinking of mounting my Voodoo ISO-5 top left by the AC inlet (around 4" from the inlet), rocker switch (direct left of inlet) and bayonet lamp (#47 - about two and a half inches from ISO-5). Do you think I'll have any issues with this?
Joshua Wilson you shouldn't have any issue. It's just my preference
I'm thinking of adding the ac inlet and rocker switch on my board - but is there a particular plug that plugs into the ac inlet from outside of the board?
into this round ac inlet?
Martin Koop yea, just a standard extension cord. Edison female plug
Just out of curiosity, could you wire 2 VL 4x4's off of a single outlet?
Yes. Typically when we do that, the easiest way is to use the courtesy outlet on one power supply to power the other power supply with a 1ft IEC cable. However, 4x4s don't have the courtesy outlet, so you can either get a splitter cable, or wire in a power strip and use 2 1ft IEC cables
So why is the camera rocking back and forth? Are you on a boat? Don't have a tripod? sheesh.
Yep. Filmed on a small charter boat in the Caribbean during a storm. We went out looking for treasure but with didn’t find any. Argh!
do you sell ac inlets and the iec power jacks and rocker switches.
if so whats the web site address so i can check out the parts you sell.
Yes. Www.creationmusiccompany.com
Links to all of those are in the video description
How can I get some
We no longer sell these items.
I CANT find these parts on your web-site.
lastinline bruce we’ve moved all our DIY parts to a new DIY site. www.creationmusicsupply.com
clean 👍😊
Works for a wood board. Not so great for a metal one.
sleek