Top notch holster for sure. I was having a problem finding the G45 and Baldr S setup and Werx was the only one that supported the Baldr S. I’m very happy with the holster and going to add the M6 mag carrier. I wish they had a quick disconnect feature for the carrier for times I don’t want to carry the extra mag around. Quality Holster folks like the man said 👍🏻🇺🇸
This is Michael Perdue I live in Florida I've got a works holster on the way for a sig p365 macro 17 round and One in the chamber this is the second works holster rig that I have bought good job on the video will probably use it to put my holster and clip edition together😮😮😮
@@flamingtiger12 I believe it did. I know it fit the M6 Outlier holster, which is their multi-pistol one. Once I get home from work, I'll try the LAPG light in the standard M6 just to be sure.
I don't understand why people keep going to cheap thin kydex when Boltaron is the way to go.. not only is stronger than kydex but has better resistance to hot/cold and its actually very cost effective. I have stopped buying kydex in favor of Boltaron and Werkz is my preferred choice when it comes to Light bearing holsters because that's their specialty and they are precision fit. Great review brother!
How is the mag carrier+tegris attached to the main shell? Are those snaps? If so, could you get a 2nd tegris flap with just a DCC clip on it? It would allow you to quickly swap between going with/wo the mag carrier?
They're sort of a snap. It's hard to describe. It's like an insert that expands when the pin gets pushed through. So what you see on the outside front of the holster/tegris is the head of the pin. I tried getting video of it from the inside but it didn't turn out.
Question since I’m ordering the holster on my right side because I’m right handed of course do I order the radius mag carrier on my left or right? I’m assuming on my right but it’ll be on my right side so I should order it for the left side could you help me out just awfully confused great video by the way
@9mmGuru If you're wearing it on your side. You don't need a mag carrier unless you're putting it on your other side. In which case, this is not a stand alone IWB mag carrier.
It's hard to explain, but they're sort of like a push-in rivet. There's a sleeve that expands once you push a center pin into it. Locking everything in place.
I have a Glock 19 GEN five with a holosun 507C GR +2he and a 7Astreamlight do you have a holsters that will fit that was no trouble hope you see the text and give me an answer I really need a holster that will fit my optic and light
I'll admit it looks like a nice setup for those of you that don't mind carrying a firearm pointed directly at your "stick and rocks" but for those of us that just ain't comfortable with the idea of getting our junk shot off in a freak accident, and yes it does happen, that just wouldn't be a good rig for "4 o'clock" carry. At least not with the mag holster.
I have a Glock 19 GEN five with a holosun 507C GR +2he and a 7Astreamlight do you have a holsters that will fit that was no trouble hope you see the text and give me an answer I really need a holster that will fit my optic and light
Great video sir just placed an order for one for my GLK 43x MOS
They make such great holsters and I'm glad you turned me on to them a couple years ago.
They really are bro!
Top notch holster for sure. I was having a problem finding the G45 and Baldr S setup and Werx was the only one that supported the Baldr S. I’m very happy with the holster and going to add the M6 mag carrier. I wish they had a quick disconnect feature for the carrier for times I don’t want to carry the extra mag around. Quality Holster folks like the man said 👍🏻🇺🇸
Does the spare mag holder have positive retention?
Yes
Solid holster and review 👌 😊
Thanks bro!
This is Michael Perdue I live in Florida I've got a works holster on the way for a sig p365 macro 17 round and One in the chamber this is the second works holster rig that I have bought good job on the video will probably use it to put my holster and clip edition together😮😮😮
Werkz make’s really good holsters they are the only holsters I use
Really wish they made a left handed holster for my setup.
Have you used the LAPG XWL in the Werkz holsters? Does it fit?
@@flamingtiger12 I believe it did. I know it fit the M6 Outlier holster, which is their multi-pistol one. Once I get home from work, I'll try the LAPG light in the standard M6 just to be sure.
I don't understand why people keep going to cheap thin kydex when Boltaron is the way to go.. not only is stronger than kydex but has better resistance to hot/cold and its actually very cost effective. I have stopped buying kydex in favor of Boltaron and Werkz is my preferred choice when it comes to Light bearing holsters because that's their specialty and they are precision fit.
Great review brother!
💯 I agree!! Thank you! And thanks for watching!
How is the mag carrier+tegris attached to the main shell? Are those snaps? If so, could you get a 2nd tegris flap with just a DCC clip on it? It would allow you to quickly swap between going with/wo the mag carrier?
They're sort of a snap. It's hard to describe. It's like an insert that expands when the pin gets pushed through. So what you see on the outside front of the holster/tegris is the head of the pin. I tried getting video of it from the inside but it didn't turn out.
Excellent review, thank you.
Question since I’m ordering the holster on my right side because I’m right handed of course do I order the radius mag carrier on my left or right? I’m assuming on my right but it’ll be on my right side so I should order it for the left side could you help me out just awfully confused great video by the way
@9mmGuru If you're wearing it on your side. You don't need a mag carrier unless you're putting it on your other side. In which case, this is not a stand alone IWB mag carrier.
That new one looks like it might work does the new M1
How do you attach it?
It's hard to explain, but they're sort of like a push-in rivet. There's a sleeve that expands once you push a center pin into it. Locking everything in place.
@@RTTGunsGear can it be removed after installation?
@nickwaah2702 yes... just stick a flat head screwdriver into the holster where the end of the push pin protrudes, and pop it back out.
@@RTTGunsGear much appreciated.
like a gazelle
I have a Glock 19 GEN five with a holosun 507C GR +2he and a 7Astreamlight do you have a holsters that will fit that was no trouble hope you see the text and give me an answer I really need a holster that will fit my optic and light
I'll admit it looks like a nice setup for those of you that don't mind carrying a firearm pointed directly at your "stick and rocks" but for those of us that just ain't comfortable with the idea of getting our junk shot off in a freak accident, and yes it does happen, that just wouldn't be a good rig for "4 o'clock" carry. At least not with the mag holster.
Just don’t pull the trigger brother.
I have a Glock 19 GEN five with a holosun 507C GR +2he and a 7Astreamlight do you have a holsters that will fit that was no trouble hope you see the text and give me an answer I really need a holster that will fit my optic and light
That new one looks like it might work does the new M1