VTECH 75 - Easy Fix 90% of Briggs Quantum Engine Not Starting Problem.

Repairing Briggs & Stratton Quantum engine which 90% of the problem engine won't start is because of this simple fix. Watch the video to see it yourself. Now you can fix your quantum engine in no time.
Replacement Air Filter & Primer Base:
www.varietech....

[@ianmccoll7907]

Thank you very very much, I have NEVER worked on a petrol engine before but have followed your excellent teachings to fix my mower that hasn't run for over 8 years. I was brave enough to remove the carby, clean it and refit it correctly, The joy when it started on the first pull. 6th April 2024

[@markusmeier13]

Thank you very much for your excellent teachings!

[@kaleuclint]

Just bought one of these!

[@Varietech-AU]

Nice! Thanks for watching and please do subscribe for your future video reference. Hope you will fix your unit as well and hope this video repair tutorial will help. VARIETECH

[@biopsiesbeanieboos55]

Nice video and very helpful. Thank you.

[@Varietech-AU]

Thanks for watching our videos. Cheers, VARIETECH

[@ldaly4621]

Thank u , exactly the information I needed

[@themowerman]

Good one mate

[@Varietech-AU]

Thanks Mick's Mowers for dropping by and appreciate the content.
Hi everyone, for those who doesn't know Mick's Mowers, here is the link below. You can visit his UA-cam channel with lots of interesting videos on Lawnmowers and small engine repair, hints and tips. You can also learn from him.
ua-cam.com/channels/SgH3eOPodZnublL0q0WRnw.html
Cheers,
VARIETECH

[@TheChillHill]

Thank you!

[@Rslibertyturbo]

I bought your product and it did not fix my problem, I can still start with spraying brake cleaner down it.I have used two gaskets and still did not work. Do I need to put sealant behind the gasket?

[@Varietech-AU]

Likely your carburetor pilot jet or pulse hole is blocked. Remove the air cleaner assy and there is a small hole (pulse hole) on the side of the carburetor manifold, spray it with carby cleaner and blow with compressed air. Even these hole and pilot jet nozzles are blocked, the engine will still start when you spray directly into the manifold. The pilot jet nozzles are those tiny holes inside the venturi towards the cylinder side. This pilot jet also coming through the tiny holes along the wall of the main jet which could also blocked. Health wise when I'm getting better, I will find another unit which I could demonstrate this issue. Warped air filter is the most common problem with this unit. Pulse hole and pilot jet are secondary issue which you might have. As of now, best is to rebuild your carburetor and there are lots of UA-cam videos you could follow.

[@Rslibertyturbo]

@@Varietech-AU I bought a brand new Chinese carby for two mowers and two primer bases. Worked fine on one but not on the other, I would keen for a video to demonstrate this problem. Thanks for the reply.

[@oliverbonijoy7370]

Perfekt! Thank you 😊

[@Varietech-AU]

Thanks for watching our videos. Cheers, VARIETECH

[@mattjohnson8902]

Very nice 😁

[@Varietech-AU]

Thanks for watching our videos. Cheers, VARIETECH

[@Varietech-AU]

Thanks for watching our videos. Cheers, VARIETECH