I'm older woman, never fixed motors of any kind. My lawnmower quit starting so I followed your very thorough, clear instructions on this video. It started on second pull and has run well ever since. THANK YOU!!!
wow... i run a lawn care business and i chit chat with the guys at the shop and they have told me about all the complicated stuff i dont understand... buck you just saved me thousands of dollars thanks brother!!!
This is by far the best diy video on lawn mower repair. You didn't add nonsense filler intros or crazy music. I really liked your hands-on and narrated approach and I am happy to subscribe and give you a thumbs up my friend.
I had never taken apart a lawnmower's workings before. It's a Poulan 500e mower. After watching this, I dove in, and after finishing, the mower started on one pull. I was so jazzed. I yelled, "I have made fire!!!"
Sometimes the auto choke keeps the mower from starting. I have one I have to put a screwdriver to keep the choke open then sprayed starting fluid inside . Pull the start rope the engine revs up fast and then the gasoline starts flowing and the engine runs. My brig's lawn boy. I also disabled the hold down bar so I can just pull start and start mowing I let the gasoline run out to stop the mower. It's best not to leave gasoline in the carb. Also do not use ethanol gasoline buy pure Gasoline. 73
Watched this video twice and not mechanically smart at all. Followed your steps and guess what? MY LAWN MOWER IS NOW WORKING AGAIN!!! I have had it for 18 years and thought it was time to trash it and buy another one! I was SO SCARED of doing something wrong during the repair because I'm not good with fixing things but your video made me believe I could fix it and I DID!!! You saved me $ from buying a new mower too!! THANKS SO MUCH AND GOD BLESS YOU for this GREAT video!!!
I followed your instructions step by step and I finally have my lawnmower working like it is brand new!!! You saved me money by taking my time instead of sending it for repairs. thank you!👍
Priceless. Fixed mine in 15 min. Even changed the air filter (used an aquarium filter cut to size, no spare parts around me). Pulled the bowl (dripping fuel, but so be it), cleaned it out, cleaned out the nut holes, re installed it all and bam! First shot. Thank you. Saved me hours and $$$ dragging it somewhere....
I have to come back here and give you your props Buck! 1st of all I want to thank God for you, and leading me to your page, for you saved me about 400$ for I was going to buy a new mower, and sit my 2005 Husqvarna mower to the curb... these clear instructions were exactly what I needed to fix my mower to the T... my mower started and ran great like it did when I first bought it... Thank you for allowing God to use you to help us out here, may The Lord bless you and yours richly for sharing your wisdom... Amen!!!🙏🏿👍🏿😊
Thank you Mr. Buck your solution to why my lawn mower ( a B/S model 90000 140cc) kept cutting off was absolutely correct. It's a very new lawn mower but sat a couple of years with a little gas in it. I looked at the other UA-cam channels until I came across yours. I tried all of those suggestions except take off the carburetor. I was able to locate the fuel injector and put a fine pin into the hole, and then put it back together. And to my amazement, it started right up and stayed on. You're the best.
@@breannaoliver6316 Muchas gracias por tu comentario. Muy amable. Pero la verdad....si! A veces me gusta participar con el bla bla bla....depende del video! Otra vez, muchas gracias.
Thanks Buck! I didn’t even have to take the carburator apart and it worked after 5 years sitting outside! I own a different lawnmower and by just removing the air filter I have direct access to the “bowl” and I shot the cleaner through all the orifices. That small no traction lawnmower was my jogging buddy I used to mow 20,000 feet with it on the regular. It saw a loooot of grass and we are finally reunited thanks to you, your tips worked beautifully!
I got about 10 lawn mowers it is running good and all of a sudden just quit Becky run out of gas and you just showed me what's wrong thank you very much,God bless
Just fixed my mower. Wife was thinking ours was just "worn out" and we would need to buy a new one. I had looked at the spark plug and the air filter. No joy. It sure helped the mower in your video seems to be exactly like ours. Took off the bowl and jet, cleaned both. Voila. Bravo, sir! You saved me $$$.
This literally just happened to me cutting my grass, my Toro mower was starting up 10:48 and then stalling out, I knew that it was something with the carburetor jet I sprayed it but I totally forgot that there was a small hole on the side. So I’m off to buy the carburetor cleaner and more starting fluid. Thank you so much for showing me that, I really do appreciate your video it was awesome! 💪💪
My old mower died a couple weeks ago and my wife found this exact mower on next door for free. It had same problem as the 1 in video I followed directions and runs perfect now. Thank you for your video!
Thank you! This worked out so well. Thank you for your detailed explanation. I couldn’t figure out the issue. Changed air filter, new spark plugs and even check if the carb was loose, nothing worked. I then cleaned out the fuel bowl, it fired right up and ran with no issues. Worked great, felt great doing it myself. Thank you giving the confidence to try it myself!
Hello, I too, was about to give up after a full tune up. Watched your video and fixed our 20+ year old Toro mower and it runs great. Thank you for taking the time to share this!!
Thank you Buck.. your video makes it seem so easy. My boys bought me another mower instead of trying to clean out the carburetor. I'm going to try cleaning it myself when it gets cooler outside.
Gas stations that have a pump that delivers ethanol free fuel IS where I buy my lawn equipment fuel always. Cars can run on 10 % ethanol. In Lawn equipment however, ethanol likes to gel. Sometimes in a few days.
I don`t know anything about repairing lawnmowers. Tried what you said and basically the lawnmower started from the first pull. I`m very grateful - thank you!
Buck - thanks for this. My 16 year old craftsman mower wouldn't start for the first time and it was definitely the carb. gunk. After watching this video, definitely more comfortable with messing with the guts of the mower, thank you!
Your a legend. I am going to give it a try! My mower is huge. It's old but it's just been overhauled with a new sparg plug, new throttle line. New throttle head and pull line, new air filter and new blades. It is hard to start and will run but not for long. This has to be the problem .... Right? After watching your video, I will give mine a go👍✌️🙏
I know that many people did Thank You but Im next , THANK YOU. didnt know what was the problem . Bought new plug and air filter did follow Your instructions and ALL WORKING PERFECT! !! !
Great video, looks like an easy fix. I've had good luck by spraying carb cleaner, into the fuel line and then using a bike pump to get the cleaner into the carb.
Sir obviously what you demonstrated here is truly exceptional advice and teaching. Thank you! Will be saving video. Let me also thank you for making your video about the facts and for not cluttering it up with horrible music so loud that we couldn’t hear you. So many UA-camrs do that and it ruins the video. Yours is simple and useful and much appreciated. Keep up the great work!
Never thought I would able to get my mower started and that I could never fix it myself but you sir have invigorated me to at least give it a try...you made the fix look so straight forward that I felt confident in myself to try something like this for the very first time and I am well over 50!...so, thank you sir for the video and the know how to help others, John ave
I was given a Craftsman/ Briggs and Stratton gas lawn mower that looks like it's never been used, it is less than ten years old. I'm sure this video will help me when I try to get it running!! Thank you very much!!
Nice informative video for those who are just learning. I'm sure it will save someone money when they see how easy and quick a mower can be fixed. And you're right. 99% of the time it is just that easy to fix one.
I think it just saved me some money! I have a similar Craftsman mower with the same carburetor setup. It would start after many pulls, but it ran rough. I cleaned the carburetor as per instructions in this video. It started on the first pull after the procedure. My bowl had no debris and the fuel screw was not clogged.
Wow you're right! My mower is doing exactly what his was and it sat all winter. However I have an exmark commercial 30. I don't know the first thing about mowers. Where is my carburetor? I was literally going to bring mines to the shop tomorrow. After watching this im hesitant
Your awesome. I have the same mower. I tore it down today cleaned it up. Removed any rust. Cleaned the carb and the bowl, the jets in the carb. Replaced fuel lines painted the metal where the free solution took the paint off. On my carb the choke lever was broken so I glassed the piece back on and shaped it. Still has the same symptoms you just fixed. You learned me I'm going go drop the bowl again now . Ty
Thanks for your time to make and share the video. STA-BIL Carb/Choke & Parts Cleaner from Harbor Freight also can be used to clean the parts. In another video I saw car brake cleaner was used.
Thank you, you just saved me $100 bucks. I bought 2 mowers for 45 bucks and one works but needed a small spring and the craftsman needed that carb screw cleaned. God is good. Just some caring advice, some rubber gloves please vs that carb cleaner. lbvs
A small engine repair guy taught me this years ago. It does work 99% of the time. I use a tiny wire to clean the jet. The other thing you should do is run your mower dry at the end of mowing season, or anytime the mower will be storage for a while.
I've got a Honda GCV160 and when I remove the bolt from the underside of the bowl I still can't remove it. It's not that it's stuck, it just looks like it's not designed to come off. D'you have any advice? I'm asking you as I can see your comment is quite new!
Nice video, Thanks for putting it out. I believe that you have helped a great many people that probably don't have the money to have their mower worked on or to just go buy a new one. Good luck with your channel.
Thank you, perfect simple visuals and instructions! my carburetor was a little different but I applied the same process and It runs great on the first pull now.
What was your carbureter like? I've got a Honda GCV160 and when I remove the bolt from the underside of the bowl I still can't remove it. It's not that it's stuck, it just looks like it's not designed to come off.
Followed step by step just now and it started perfectly. Thank you for this video! This was last step before it got the garbage because we already put new spark plug too
What else can I say? Thumbs up! I will certainly give this method a try, considering that my Toyota push mower has the same issues that your mower showed in this video. My mower is a Toyota HRA214 (circa 1984). This mower has been in the family since it was new. It is in relatively good shape, though I sent the carburetor out for a rebuild about 3 years ago. The mower ran great after the carburetor rebuild, but the next season it wouldn't start. It is my backup mower, but I would like to get it running again. I'll be giving your method a try, considering that the mower currently runs for about 10 seconds with a blast of starting fluid before stalling out.
Thank you! My Toro wouldn't start for my first mow of the season. It had started the first or second pull the last 8 years. Tried a few of the normal things and then some but once I did what your video shows it started on the first pull! Thank you, thank you, thank you!
Thank you so much. I am a female and just tried to get my mower running after about 4 years of non use. I had already changed the air filter and the oil and this in itself was quite something for me to attempt because I know computers, not small engines. I was getting ready to do what you showed here because your instructions were so clear. I ended up being able to use a particular product (not sure if it will let me mention that here but the brand name starts with an S and the product itself has FF as the initials). But thanks for this video. I would have stopped and hired someone at this point but because I was prepared to take that carburetor out and do what you showed here, you saved me a ton of money. I stood in front of my garage with it running grinning from ear to ear.
Gas power over batteries any day! I worked on small engines most of my life and brings joy to my heart when a mower, blower or whacker kicks back to life! Enjoyed your videos!
I have an old lawnmower that looks like this one, Tecumseh/Champion 20 inch. Probably 30+years old, have had it second hand for 20 years, typical backyard use. This year it turns over for a few seconds with starting fluid and died. I know nothing about small engines but after a few videos here I saw that the float bowl was accessible and had the brass bowl nut accessible like the one here. So, unscrewed it, cleaned out the crud in the float bowl, and poked through the tiny holes in the float bolt with a fine wire and blew it out, washed it in gasoline. Put it back together, and now it purrs like a kitten. I noted that the gasoline (some from last year) was a strange yellow colour (unlike the fresh gasoline - pale yellow) and it had yellow flakes of something floating in it. So best to use up gas at the end of the season and replace. Thumbs up to Bucks!
Hello I wanted to say thank you. My friend's Craftsmen mower would not start. I had replaced the spark plug. I followed your direction and cleaned out the main jet and the mower started with no problems. Thank you so much.
Just found your channel today. Liked and subscribed. Thank you for sharing your knowledge. Now, I need to see if you have any videos on weed whacker and riding mower repair.
Great video, only wish I had found it sooner, could have saved myself a couple of blisters, the nut was blocked on mine, like a different lawnmower now.
Do the backflip, btw thank you. Got 2 stratons for 30 bucks, wanted to get them running and use one as a personal mower and turn the other into a go-kart cause it's 6.5hp other one is 6.25. this is dang the best video I found so thank you for the content I'm subscribing u fr making my small motor dreams come true
I was on the verge of buying a new mower but then I found your post, which enabled me to fix mine very quickly. Thank you.
Great job doing it yourself!!!
I'm older woman, never fixed motors of any kind. My lawnmower quit starting so I followed your very thorough, clear instructions on this video. It started on second pull and has run well ever since. THANK YOU!!!
Great job, Kaye, fixing it yourself!
Bro thank you mate I'm from the UK I have turned this into a business just made my third repair in 8 hours
wow... i run a lawn care business and i chit chat with the guys at the shop and they have told me about all the complicated stuff i dont understand... buck you just saved me thousands of dollars thanks brother!!!
This is by far the best diy video on lawn mower repair. You didn't add nonsense filler intros or crazy music. I really liked your hands-on and narrated approach and I am happy to subscribe and give you a thumbs up my friend.
Thanks so very much. Hope you got your mower back up and running!
I had never taken apart a lawnmower's workings before. It's a Poulan 500e mower. After watching this, I dove in, and after finishing, the mower started on one pull. I was so jazzed. I yelled, "I have made fire!!!"
Great job fixing it yourself!
fire hot!
You made a clear instruction to follow. I just fix my lawn mower yesterday . Boom ...it's working now .Thank you Buck .J.from Toronto,Canada.
Do not get carb cleaner on you,it's carcinogenic.
Sometimes the auto choke keeps the mower from starting. I have one I have to put a screwdriver to keep the choke open then sprayed starting fluid inside . Pull the start rope the engine revs up fast and then the gasoline starts flowing and the engine runs. My brig's lawn boy. I also disabled the hold down bar so I can just pull start and start mowing I let the gasoline run out to stop the mower. It's best not to leave gasoline in the carb. Also do not use ethanol gasoline buy pure Gasoline. 73
Watched this video twice and not mechanically smart at all. Followed your steps and guess what? MY LAWN MOWER IS NOW WORKING AGAIN!!! I have had it for 18 years and thought it was time to trash it and buy another one! I was SO SCARED of doing something wrong during the repair because I'm not good with fixing things but your video made me believe I could fix it and I DID!!! You saved me $ from buying a new mower too!! THANKS SO MUCH AND GOD BLESS YOU for this GREAT video!!!
Great job fixing it yourself! Your note made my day!
I followed your instructions step by step and I finally have my lawnmower working like it is brand new!!!
You saved me money by taking my time instead of sending it for repairs.
thank you!👍
Great job fixing it yourself!
Priceless. Fixed mine in 15 min. Even changed the air filter (used an aquarium filter cut to size, no spare parts around me). Pulled the bowl (dripping fuel, but so be it), cleaned it out, cleaned out the nut holes, re installed it all and bam! First shot. Thank you. Saved me hours and $$$ dragging it somewhere....
Great job doing it yourself!!!
I have to come back here and give you your props Buck! 1st of all I want to thank God for you, and leading me to your page, for you saved me about 400$ for I was going to buy a new mower, and sit my 2005 Husqvarna mower to the curb... these clear instructions were exactly what I needed to fix my mower to the T... my mower started and ran great like it did when I first bought it... Thank you for allowing God to use you to help us out here, may The Lord bless you and yours richly for sharing your wisdom... Amen!!!🙏🏿👍🏿😊
Thank you, Allen, for the kind note. You really made my day. Great job fixing the mower yourself!!!
I just watched your video this morning and we're able to work our gas mower. Thank you for sharing. God Bless you multifold.
Thank you Mr. Buck your solution to why my lawn mower ( a B/S model 90000 140cc) kept cutting off was absolutely correct. It's a very new lawn mower but sat a couple of years with a little gas in it. I looked at the other UA-cam channels until I came across yours. I tried all of those suggestions except take off the carburetor. I was able to locate the fuel injector and put a fine pin into the hole, and then put it back together. And to my amazement, it started right up and stayed on. You're the best.
Good job getting it done yourself! Happy mowing!
@@Buckwsr me gusta mucho ver Tus videos por que TU lo explicas DIRECTA Mente,sin tanto bla bla bla. Saludos!
@@breannaoliver6316 Muchas gracias por tu comentario. Muy amable. Pero la verdad....si! A veces me gusta participar con el bla bla bla....depende del video! Otra vez, muchas gracias.
@@Buckwsr.is my pleasure!!!
Hello: I just sprayed starter fluid into the carburetor. It started right up. Beautiful sound!
Thanks Buck! I didn’t even have to take the carburator apart and it worked after 5 years sitting outside! I own a different lawnmower and by just removing the air filter I have direct access to the “bowl” and I shot the cleaner through all the orifices. That small no traction lawnmower was my jogging buddy I used to mow 20,000 feet with it on the regular. It saw a loooot of grass and we are finally reunited thanks to you, your tips worked beautifully!
Great job fixing it yourself!
Amazing!! Didn't even have to fully remove the carburetor. Worked perfectly!! Thanks so much!
I got about 10 lawn mowers it is running good and all of a sudden just quit Becky run out of gas and you just showed me what's wrong thank you very much,God bless
The most easy and clear explanations on this subject. Showing when it does start or only start for a feew seconds.
Just fixed my mower. Wife was thinking ours was just "worn out" and we would need to buy a new one. I had looked at the spark plug and the air filter. No joy. It sure helped the mower in your video seems to be exactly like ours. Took off the bowl and jet, cleaned both. Voila. Bravo, sir! You saved me $$$.
Great job doing it yourself and scoring points with your wife!! I call that a win-win!
This literally just happened to me cutting my grass, my Toro mower was starting up 10:48 and then stalling out, I knew that it was something with the carburetor jet I sprayed it but I totally forgot that there was a small hole on the side. So I’m off to buy the carburetor cleaner and more starting fluid. Thank you so much for showing me that, I really do appreciate your video it was awesome! 💪💪
Thank you, and good luck with the repair!
My old mower died a couple weeks ago and my wife found this exact mower on next door for free. It had same problem as the 1 in video I followed directions and runs perfect now. Thank you for your video!
thanks for this step by step guide on how to fix a mower and I will let you know if it works for me.
Thank you! This worked out so well. Thank you for your detailed explanation. I couldn’t figure out the issue. Changed air filter, new spark plugs and even check if the carb was loose, nothing worked. I then cleaned out the fuel bowl, it fired right up and ran with no issues. Worked great, felt great doing it myself. Thank you giving the confidence to try it myself!
Hello, I too, was about to give up after a full tune up. Watched your video and fixed our 20+ year old Toro mower and it runs great. Thank you for taking the time to share this!!
Thanks so much, and great job fixing it yourself!
Thank you Buck.. your video makes it seem so easy. My boys bought me another mower instead of trying to clean out the carburetor. I'm going to try cleaning it myself when it gets cooler outside.
Yes. It's an easy job, especially on this particular engine. Good luck!
Gas stations that have a pump that delivers ethanol free fuel IS where I buy my lawn equipment fuel always. Cars can run on
10 % ethanol. In Lawn equipment however, ethanol likes to gel. Sometimes in a few days.
Thanks
Thank you so much, very kind of you! Buck
I don`t know anything about repairing lawnmowers. Tried what you said and basically the lawnmower started from the first pull. I`m very grateful - thank you!
Clear, concise and to the point. Great tutorial, many thanks...will be giving this a go tomorrow 👍
Thank you 👍🏼 for showing how to fix the lawnmower i’ll have to give it a try myself
Buck - thanks for this. My 16 year old craftsman mower wouldn't start for the first time and it was definitely the carb. gunk. After watching this video, definitely more comfortable with messing with the guts of the mower, thank you!
Using common sense to determine the problem, specially after sitting during winter. Great job and great info video! Thank You! 👍😎
I really enjoyed watching this & now I’m going 2 follow this same procedure.
Great explanation. I’m going to fix my old lawnmower today!
Your a legend.
I am going to give it a try!
My mower is huge.
It's old but it's just been overhauled with a new sparg plug, new throttle line.
New throttle head and pull line, new air filter and new blades.
It is hard to start and will run but not for long.
This has to be the problem .... Right?
After watching your video, I will give mine a go👍✌️🙏
Thank you! Life would be so much more difficult without people like you.
Thank you so much!
I know that many people did Thank You but Im next , THANK YOU. didnt know what was the problem . Bought new plug and air filter did follow Your instructions and ALL WORKING PERFECT! !! !
Watched your video yesterday, and today got my daughters and my Craftsman Lawn mowers to start 1st pull. Magnificent! Thank you so much!
Great job! You are a fabulous DIYer!
Great video, looks like an easy fix. I've had good luck by spraying carb cleaner, into the fuel line and then using a bike pump to get the cleaner into the carb.
Sir obviously what you demonstrated here is truly exceptional advice and teaching. Thank you! Will be saving video. Let me also thank you for making your video about the facts and for not cluttering it up with horrible music so loud that we couldn’t hear you. So many UA-camrs do that and it ruins the video. Yours is simple and useful and much appreciated. Keep up the great work!
Thank you, and good luck with your mower!
Thank you, Buck! I had no confidence in my ability, but I watched the video, did what you did, and my mower is working great now!
Great job fixing it yourself!
Never thought I would able to get my mower started and that I could never fix it myself but you sir have invigorated me to at least give it a try...you made the fix look so straight forward that I felt confident in myself to try something like this for the very first time and I am well over 50!...so, thank you sir for the video and the know how to help others, John
ave
I was given a Craftsman/ Briggs and Stratton gas lawn mower that looks like it's never been used, it is less than ten years old. I'm sure this video will help me when I try to get it running!! Thank you very much!!
Same here, your 10 min fix worked. Awesome !!!
Nice informative video for those who are just learning. I'm sure it will save someone money when they see how easy and quick a mower can be fixed. And you're right. 99% of the time it is just that easy to fix one.
Thanks, Larry!
I think it just saved me some money! I have a similar Craftsman mower with the same carburetor setup. It would start after many pulls, but it ran rough. I cleaned the carburetor as per instructions in this video. It started on the first pull after the procedure. My bowl had no debris and the fuel screw was not clogged.
Wow you're right! My mower is doing exactly what his was and it sat all winter. However I have an exmark commercial 30. I don't know the first thing about mowers. Where is my carburetor? I was literally going to bring mines to the shop tomorrow. After watching this im hesitant
First pull and my Einhell lawnmower started! Brilliant advice sir!
Awesome job that the first thing my dad taught me when i started cutting gas at 11 year old. and we did not have ethanol gas back then.
Followed your steps today and my long-neglected baby started up on the first pull. Thank you!!!
First-pull victory! I love it!
Good information will try this today had 2 mowers that have same problem, thank you.
This video is awsome,’ just followed your guid lines,’ and poof my lawnmower is working again. Thank you
Thanks you for showing me that I be having the same problem now I fixing it myself that helps me a lot keep up the good work.
Your awesome. I have the same mower. I tore it down today cleaned it up. Removed any rust. Cleaned the carb and the bowl, the jets in the carb. Replaced fuel lines painted the metal where the free solution took the paint off. On my carb the choke lever was broken so I glassed the piece back on and shaped it. Still has the same symptoms you just fixed. You learned me I'm going go drop the bowl again now . Ty
Thanks for your time to make and share the video. STA-BIL Carb/Choke & Parts Cleaner from Harbor Freight also can be used to clean the parts. In another video I saw car brake cleaner was used.
Perfect instructions! Worked like a charm! Thanks so much!
Thank you, you just saved me $100 bucks. I bought 2 mowers for 45 bucks and one works but needed a small spring and the craftsman needed that carb screw cleaned. God is good. Just some caring advice, some rubber gloves please vs that carb cleaner. lbvs
A small engine repair guy taught me this years ago. It does work 99% of the time. I use a tiny wire to clean the jet. The other thing you should do is run your mower dry at the end of mowing season, or anytime the mower will be storage for a while.
I've got a Honda GCV160 and when I remove the bolt from the underside of the bowl I still can't remove it. It's not that it's stuck, it just looks like it's not designed to come off. D'you have any advice? I'm asking you as I can see your comment is quite new!
Very cool. Thanks for sharing. My cat here was amazed!
thanks! I have this exact mower doing the same damn thing. Will be cleaning out that carburetor tomorrow!
Nice video, Thanks for putting it out. I believe that you have helped a great many people that probably don't have the money to have their mower worked on or to just go buy a new one. Good luck with your channel.
Thank you, perfect simple visuals and instructions! my carburetor was a little different but I applied the same process and It runs great on the first pull now.
What was your carbureter like? I've got a Honda GCV160 and when I remove the bolt from the underside of the bowl I still can't remove it. It's not that it's stuck, it just looks like it's not designed to come off.
Very, very Informative!!! Thank you SO much fir doing what you do to help others save time and money!!! Bless you. 👍🏾❤️
Worked perfect for me, thanks very much, was about to go looking for a new mower.
So well explained the steps of troubleshooting. I followed diligently & , it worked!!! Thank you Buck !!!
Thank God for UA-cam
Oh thank you so much I’ll be fixing my lawn mower tomorrow can’t wait.
Followed step by step just now and it started perfectly. Thank you for this video! This was last step before it got the garbage because we already put new spark plug too
Great job, Stephanie, doing it yourself!
Thank you for making this video. It helped me to get mine running again. Feeling very blessed today!!
Great job doing it yourself!
Thank you.I did what you said and my mower works now
Thanks Buck! Great video! I'm on the job!
that's pretty cool got a brand new mower now It looks good Thank you for the video
Very well explanation of the trouble shooting process. Thank you!
Excellent instructions .
Thank you
SCORE!!!! Thank you, thank you,thank you!!!! Did exactly what you demonstrated and it works better than ever.
What else can I say? Thumbs up!
I will certainly give this method a try, considering that my Toyota push mower has the same issues that your mower showed in this video. My mower is a Toyota HRA214 (circa 1984). This mower has been in the family since it was new. It is in relatively good shape, though I sent the carburetor out for a rebuild about 3 years ago. The mower ran great after the carburetor rebuild, but the next season it wouldn't start.
It is my backup mower, but I would like to get it running again. I'll be giving your method a try, considering that the mower currently runs for about 10 seconds with a blast of starting fluid before stalling out.
This worked like a charm. You probably saved me $100!
I was frustrated with my Briggs and Stratton 625 series that won't start.
Followed your instructions and its working again! Thanks!!!!
Beautiful, keep my fingers crossed
Hey I did what u said push mower started right up actually was easy to do thanks
thanks for the video and it solved my problem too. I appreciated a lot, many thanks.
Did you have a replacement for the worn out gasket? What is that part? Are they sold loose or what kind of replacement would I be looking for?
Thank you! My Toro wouldn't start for my first mow of the season. It had started the first or second pull the last 8 years. Tried a few of the normal things and then some but once I did what your video shows it started on the first pull! Thank you, thank you, thank you!
Great job fixing it yourself!
That was a lot of fun to watch. Really good!! Thank you
Thank you.
Thanks! Follow your video and it work fixing my lawn that won't start..thumb up liked. Thank you!
Great job fixing it yourself!
Thank you so much. I am a female and just tried to get my mower running after about 4 years of non use. I had already changed the air filter and the oil and this in itself was quite something for me to attempt because I know computers, not small engines.
I was getting ready to do what you showed here because your instructions were so clear. I ended up being able to use a particular product (not sure if it will let me mention that here but the brand name starts with an S and the product itself has FF as the initials).
But thanks for this video. I would have stopped and hired someone at this point but because I was prepared to take that carburetor out and do what you showed here, you saved me a ton of money.
I stood in front of my garage with it running grinning from ear to ear.
Great job doing it yourself!
I am shocked at how easy this was. I actually just needed to adjust the needle a few turns, but I wouldn't have done it without watching this video
Thank you,sir very helpful for us backyard mechanics
Genius, so simple, THANK YOU!
Thank you Buck! This worked like a charm. Mower is running better than ever!
Nice I was looking for a new mower, but I think I'll go try this first thank you so much !
Thanks for the video i will try that to my mower tomorrow GOD bless you!!!
This video helped me 100 percent 😊😊😊😊
Great video , thank you so much guy . Very informative.
This guy is spot on. Thanks for the video
Thanks for the kind words!
Thanks Buck! - this was exactly what was wrong with my mower. Also, it doesn't stall in the tall grass anymore.
Work like a charm. Thanks buck.
Gas power over batteries any day! I worked on small engines most of my life and brings joy to my heart when a mower, blower or whacker kicks back to life! Enjoyed your videos!
Thank you.
I have an old lawnmower that looks like this one, Tecumseh/Champion 20 inch. Probably 30+years old, have had it second hand for 20 years, typical backyard use. This year it turns over for a few seconds with starting fluid and died. I know nothing about small engines but after a few videos here I saw that the float bowl was accessible and had the brass bowl nut accessible like the one here. So, unscrewed it, cleaned out the crud in the float bowl, and poked through the tiny holes in the float bolt with a fine wire and blew it out, washed it in gasoline. Put it back together, and now it purrs like a kitten. I noted that the gasoline (some from last year) was a strange yellow colour (unlike the fresh gasoline - pale yellow) and it had yellow flakes of something floating in it. So best to use up gas at the end of the season and replace. Thumbs up to Bucks!
Yes, the Tecumseh engines, like the Briggs, use the bowl nut as the main jet. Great job fixing it yourself!
Hello I wanted to say thank you. My friend's Craftsmen mower would not start. I had replaced the spark plug. I followed your direction and cleaned out the main jet and the mower started with no problems. Thank you so much.
Great job doing it yourself!
Great job im going to try on my mower
Good video mate .. I use a micro drill bit on the jets .. that does a good job too.. ta for the video mate
Thanks, Mick! I find those micro bits helpful on Honda engines. Thanks for watching the video!
Just found your channel today. Liked and subscribed. Thank you for sharing your knowledge. Now, I need to see if you have any videos on weed whacker and riding mower repair.
Great video, only wish I had found it sooner, could have saved myself a couple of blisters, the nut was blocked on mine, like a different lawnmower now.
Do the backflip, btw thank you. Got 2 stratons for 30 bucks, wanted to get them running and use one as a personal mower and turn the other into a go-kart cause it's 6.5hp other one is 6.25. this is dang the best video I found so thank you for the content I'm subscribing u fr making my small motor dreams come true