Feel free to leave a comment with any suggestions for me next time or if you have any questions I'd be glad to try to help! Also you really should hit that SUBSCRIBE button so I can keep making more videos like this!
bruhhhh! AWESOME! This is the ONLY video on the internet that has done this that myself and many are curious about. I'm lucky to even run across it with such generic keyword and title of the video. These deadbolt keypad locks also come in smart versions that are compatible with google home, alexa, etc. So you can make it even more functional for guests etc and monitor it when opened. Just to note, these are obviously meant for exterior BUT only the side that is supposed to be on the outside part. The back side where the battery and electronics are housed is not. As you mentioned in a reply to someone, you can help reduce chances of failure of caulking around that part, OR you could build a hood of some sort above the inner part of the unit.
Thanks glad it helped! Haha yeah I changed the title to that because for some reason "how to build a gate with a deadbolt" wasn't picking up any views at all
Thank you so much for this video. I just shared it with my niece, who’s doing a similar install to give backyard private access for a tenant renting her rear yard cottage.
"Gate" content, thanks for the walkthrough! I would recommend lowering the volume for the intro and outro personally. This helped me get a deadbolt/door handle installed on our gate, thanks for that!
Excellent, “How to” video! I’d probably put some 4” long screws into the striker plate side and angle iron for the stopper but still a great video! Thank you sir!😎
Good stuff!! I like how you did the corners of the frame. That's probably stronger than mitered corners. Also, you don't have to premix your quickrete. Just pour it in the hole and then add water after you get it plum. I also coat all of my posts with a rubber spray a minimum of 26". This way they'll never rot.
Thanks John! These are great tips. I just set some more posts and ended up using a treated wood stain for the bottom of them but I like the rubber spray idea
The door stop you should have made it a full vertical strip so it look better and also take the place as a weather strip. With that said great 👍 job 💯.
If you had the material, maybe put a stop along the full height of the jamb? For a little more contact if the gate is getting closed hard or blown in the wind, less stress on the handle latch and hinges in the long run (or whatever a stop is really for). But great looking and some good learning here, thanks for sharing!
Yes definitely a full height jam would be way better. I didn't think about it before the very end so I didn't really have anything planned for the jam. The client I built it for is a close friend so I'm sure I'll get a text some day that the little block broke off and I'll go back and add an actual jam. Glad you enjoyed it. Thanks for watching!!!
A much easier way for setting the post...Put the post in the hole. Does not have to be level yet. Then add about 2 qts. of water in to the hole. Next pour in bag of Quickrete right in to the hole. Then grab post and level. Level the post and hold in place for a minute or 2. Then add a little more water. Double check level and adjust as necessary. Just hold in place for a couple of minutes. You can add another bag of Quikrete and water if you want. I usually do 1 1/2 bags per post. Should be set and ready to go in 30 minutes.
Thanks! Yes it is meant for an exterior door. With that being said, technically only the keypad side is designed to be outside (with the other side usually inside the door) but all the electronics are on the key pad side besides the 9v battery so it is pretty waterproof. (could probably be made more waterproof if you add some caulking too)
@@dumpsterfire6351 Yeah no problem glad it helped. I actually ended up going back a couple days later and fixed the crookedness you arn't trippin hahaha. It's because when I drilled the deadbolt hole I went from both sides and it made it weird so it was tough to get the lock in (which it shouldn’t of been). If you buy the door template consider getting one with decent drill bits because they are made to be drilled through doors and not rough lumber so the bits I use struggled and caused that to happen. Good luck on your project :)
Do you think the lock would work on an existing 2 x 4 fence? I won't be using a handle, just a traditional decorative gate latch so it looks like you might be able to squeeze the keypad part on
Thanks for sharing, but the Schlage lock is only as good as the strength of the gate and your framing. You can enter with just a few kicks to the gate and your frame will crack. But, it looks nice! Also, I had called Schlage and other Smart door lock manufacturers and they do not warranty the normally interior part of the digital lock for exterior use. Smart locks normally sag on wooden gates especially in cold and wet temperatures. I'm curious if a keypad lock has more success on an exterior gate than a Smart one?
good points but same could be said about anything. Someone can break in simply by breaking the window in front of the house that everyone has. A kick to that fence and i would say parts of the panels would break and leg going through there before the actual deadbolt/lock breaks. It's just a deterrent and preventive measures. You are right about the interior side as these were meant to be for regular use doors with only the exterior part as weather proof. He is in SoCal so weather doesnt get as extreme there, rain is as extreme as it gets there and temps no lower than 60s maybe mid 50s in the winters. Simple solution as clear caulk around or building a hood above the interior section would suffice. The biggest what if really is overtime how the fence will sag. It's aligned now with striker and latch but as we know with wood fences, gravity will take its toll on the side where dead bolt is at as when its open it is hanging freely with the weight no longer being held by the latch. But its very unlikely it will be open for long periods to make it sag quickly. As long as the section where the hinges are mounted is nice and secure and the posts are good, it shouldnt be an issue. Not very many people have done this or used these smart locks in exterior scenarios and those who have really have only did so in the last year or so. So there isnt enough data on how well they hold up over time.
It looks great 👍 , but I would’ve added the extra fence picket where the lock mechanism is and I would’ve not use the wood glue since it makes too much of a mess you would’ve been fine without it.
@@DIYSCOTT did you try making a hole around the Gate picket so that you can add the lock. It would’ve looked more presentable. I noticed you mentioned you were from Southern California. I’m from Anaheim.
Thanks! Yeah the handle is independent from the dead bolt but they can lock or unlock the gate by turning the switch/knob thing. You could technically just do the deadbolt without the handle but it would be a little harder to open and close
Hi Scott, Thanks great video! Wandering why you cut the 2x4 the way you did vs putting the side ones on top of trop and bottom ones ? Does it make the door stronger? I am building one for myself tomorrow and really want to do the same way but it will add more time but will do it only if it makes more sense! Also thank you for the 2x6 trick, it makes great sense. I will apply that to my gate. One last question why don’t you put one board over the 2x6 to make it look all the same with the rest and cut out a bigger hole to snug in the 2 locks? Thank you again for taking the time in making this video for us!!!
Hi. I don't know remember why I did the frame that way. Mainly for appearance. I think either way should work. You could put a board over the 2x6 but like you said you will most likely have to recess the locks due to the assembly getting too thick. Good luck on your project!
@@DIYSCOTT thank you for the reply! My gate is actually more like an exterior door so I am adding plywood over the frame, black paper and groove and tongue type of wood finish. I am building a storage under my staircase so trying to keep it dry. I ended up not using your cuts on 2x4 and 2x6 and realized that my screws were much too small. So I had to improvise and use pocket screws (I think they are called) with wood glue. It seems to be pretty strong. After I installed my hinges and set them well I went to make my holes for my lock but realized I did not follow your advise correctly and put the 2x6 on the wrong side. So I had to remove all screws and turn it around so I could move on… I was able to make my holes and can’t thank you enough for that great tip!!! I will manage to make bigger cuts with a Dremel to sink in my lock. I now have to find a video on how to properly install that black paper!!! I wish I could send you a pick of the door but no option here!! Thank you for your video. I
i Don"t like it -----------------------------------------I LOVE IT THE BEST I HAVE SEEN I CANT WAIT TO GET STARTED AFTER I BUILD MY TOP PRIVACY FENCE ON TOP OF MY BRICK WALL . thank you
It's not my house so idk but I haven't heard anything so I think it is fine still. I would do a little silicone caulking on it if you are worried about it
We don't get much weather in Southern California but so far no complaints from the owner. If you are worried about weatherproofing it I would add caulking wherever you can. Not really any electronics on the non-weatherproof side besides the battery and battery cable and caulking could help prevent moisture from getting into the back of the face of the lock. Or do a cover or it like this www.amazon.com/dp/B00HWY4Z8K/ref=cm_sw_r_cp_api_glc_fabc_4xy8FbSJGEJ8K (but I personally don't like the look of it). Hope you find something that works for you!
just get clear caulk and put it around the unit (part on the inner part of the home) no need for the exterior part with the keypad as that was designed to be in the elements. You can also built some kind of hood above the unit on the inside.
One side is intended for outdoor use (usually goes on the exterior of a door) the other side on the one I used was just a wire going to a 9 volt battery so I'd say it's pretty weatherproof
Took me 2 Days just because I had to concrete in the post. Could be done in an afternoon if you have a good plan. It's just a couple 2x4s, a 2x6 , a 4x4, some fence planks, and a box of screws/staples so I'd say without the lock it would be a little over $100 in materials. But the locks can be another $100+.
Help i have a cedar gate with the deadbolt & sealed it will outdoor sealer/stain yet when we have lots of rain over 2 days or si the wood swells & it won't close!!!! Any suggestions on waterproofing
The owner ended up using: www.homedepot.com/p/BEHR-1-Gal-White-Base-Solid-Color-House-and-Fence-Exterior-Wood-Stain-01101/203223466?source=shoppingads&locale=en-US&mtc=Shopping-B-F_D24-G-D24-24_11_EXT_STAINS_WATERSEALERS-Multi-NA-Feed-LIA-NA-NA-FY21_Exterior_LIA&cm_mmc=Shopping-B-F_D24-G-D24-24_11_EXT_STAINS_WATERSEALERS-Multi-NA-Feed-LIA-NA-NA-FY21_Exterior_LIA-71700000075828152-58700006498658431-92700058687514951&gclid=CjwKCAjwjuqDBhAGEiwAdX2cjzxNs4bshzvxP1gEh4M9cOS8uZ9qOAhBXHOvuhfzfbPO0mCu4G2hShoCYfEQAvD_BwE&gclsrc=aw.ds
I don't know too much on stains, but I'd imagine any outdoor deck or fence stain from your hardware store would do the trick. If your gate doesn't have enough gap though you may want to consider taking off 1/4" on each side because the wood will expand and shrink even with temperature change. Hope this helps. Good luck!
This was awesome Scott. I just put up a gate and as trying to figure out how to make it secure from both sides. This looks great man. Good work. Carpenter Respect 🫡
My husband needs to make 4 gates for a client and is trying to determine how many hours to bill. How long did it take you to build and install just the gate?
Yeah depends on a lot of things but if I did it right the first time (used the 2x6 for the lock side) it probably took me two full days to do it right. Once you get past the learning curve though I think you could do 4 of these done in like 3 to 5 days depending on experience. Probably best to do all the concrete first because it takes time to cure. Hope this helps!
Many thanks. Please, can you recommend the brand for digital access code pad? I have a list but still searching for most reliable and rain proof. Lockey brand so far.
This is the one I used. Important to keep in mind that most of these looks are designed to only get weather/wet on the keypad side as usually when used on a door the other side would be protected inside. Hope this helps! www.homedepot.com/p/Schlage-Camelot-Keypad-Electronic-Door-Lock-Deadbolt-and-Georgian-Knob-in-Aged-Bronze-BE365-CAM-F10-GEO-716/312594416
How is it holding up? Did you consider putting a cover like this over it: STI 6521S www.amazon.com/dp/B00HWY4Z8K/ref=cm_sw_r_cp_api_glc_fabc_4xy8FbSJGEJ8K
@@ejc3 So far so good. In southern California we don't get too much weather so that could be a factor to consider depending on where you are. On the back side of the lock I used (the part that should technically not be exposed to the elements when installed on a door), the only electronics were the 9volt battery and battery connector wire. Don't hold me to it but I think some silicone caulking would be enough to help increase its durability. The cover would definitely be the safest way to go if it doesn't bother you visually. Hope this helps! Thanks for watching :)
The locks are made to be on exterior side of doors. Works just fine in southern California where we don't get much. Always could add silicone to seal it up more or a cover. Thanks for watching!
@@DIYSCOTT im in Georgia where the humidity kills everything. A real lock set is nice to have. im about to do a fence and gate in florida. I am looking at the waterproof kind but im not sure if either will last with the salt air down there.
The keypad part of the deadbolt is designed to be on the outside of an exterior door. The other side just has the battery in it but isn't necessarily designed to get wet. Could make it more waterproof with some caulking if you live in an area that gets lots of weather
Feel free to leave a comment with any suggestions for me next time or if you have any questions I'd be glad to try to help! Also you really should hit that SUBSCRIBE button so I can keep making more videos like this!
This is great...thanks Scott! May I ask where you bought the dead bolt? I'm having trouble actually finding one.
@@pacificH2O Home Depot has a bunch of different options. It's just a normal exterior grade electronic dead bolt.
A lot of guys put a header over the top so the posts won't sag but the posts have to be at least 6 ft 6 to accommodate taller people
Milwaukee has an awesome door hole jig package for $32 comes with drill bits
@@megalodonseancasey8429 That's interesting. I've personally never seen that were I live but it makes sense
bruhhhh! AWESOME! This is the ONLY video on the internet that has done this that myself and many are curious about. I'm lucky to even run across it with such generic keyword and title of the video. These deadbolt keypad locks also come in smart versions that are compatible with google home, alexa, etc. So you can make it even more functional for guests etc and monitor it when opened. Just to note, these are obviously meant for exterior BUT only the side that is supposed to be on the outside part. The back side where the battery and electronics are housed is not. As you mentioned in a reply to someone, you can help reduce chances of failure of caulking around that part, OR you could build a hood of some sort above the inner part of the unit.
Thanks glad it helped! Haha yeah I changed the title to that because for some reason "how to build a gate with a deadbolt" wasn't picking up any views at all
Thank you so much for this video. I just shared it with my niece, who’s doing a similar install to give backyard private access for a tenant renting her rear yard cottage.
Glad it helped!
"Gate" content, thanks for the walkthrough! I would recommend lowering the volume for the intro and outro personally. This helped me get a deadbolt/door handle installed on our gate, thanks for that!
Glad it helped! I will lower the volume on that next time
Didn't know how it would work with the rain with electronic door lock great video
Still working years later 🤷♂️
Excellent, “How to” video! I’d probably put some 4” long screws into the striker plate side and angle iron for the stopper but still a great video! Thank you sir!😎
Yes the stopper was definitely last minute and janky. Good idea on the long screws to help hold it to the house wall. Thanks for watching!
Good stuff!! I like how you did the corners of the frame. That's probably stronger than mitered corners. Also, you don't have to premix your quickrete. Just pour it in the hole and then add water after you get it plum. I also coat all of my posts with a rubber spray a minimum of 26". This way they'll never rot.
Thanks John! These are great tips. I just set some more posts and ended up using a treated wood stain for the bottom of them but I like the rubber spray idea
The stain works too! Great idea!
I like it you did a great job thank you for you video.
Thanks!
Thanks so much for this. Surprised more people don’t do this as well.
Glad it helped. Thanks for watching!
Good job! Glad you showed the tools that helped you install the striker plate and door handles
Thank you! I was looking for a keyless entry installation for a gate I will be building. Nice job!
Glad I could help. Thanks for watching!
The door stop you should have made it a full vertical strip so it look better and also take the place as a weather strip. With that said great 👍 job 💯.
Yeah the door stop definitely should be. I honestly completely forgot about it to the end and just tacked that block on
If you had the material, maybe put a stop along the full height of the jamb? For a little more contact if the gate is getting closed hard or blown in the wind, less stress on the handle latch and hinges in the long run (or whatever a stop is really for). But great looking and some good learning here, thanks for sharing!
Yes definitely a full height jam would be way better. I didn't think about it before the very end so I didn't really have anything planned for the jam. The client I built it for is a close friend so I'm sure I'll get a text some day that the little block broke off and I'll go back and add an actual jam. Glad you enjoyed it. Thanks for watching!!!
Nice job!
Thanks!
Thanks for this tutorial I'm going to try this on Saturday and I'm going to follow your tips.
Yeah for sure! It's a good little project have fun!
Great video . Just what I was looking for
Awesome glad it helped!
Fine job, Sir
Thanks!
Looks good
A much easier way for setting the post...Put the post in the hole. Does not have to be level yet. Then add about 2 qts. of water in to the hole. Next pour in bag of Quickrete right in to the hole. Then grab post and level. Level the post and hold in place for a minute or 2. Then add a little more water. Double check level and adjust as necessary. Just hold in place for a couple of minutes. You can add another bag of Quikrete and water if you want. I usually do 1 1/2 bags per post. Should be set and ready to go in 30 minutes.
Interesting I'll have to try that sometime
Nice man! And obviously that door number knob is waterproof correct
Thanks! Yes it is meant for an exterior door. With that being said, technically only the keypad side is designed to be outside (with the other side usually inside the door) but all the electronics are on the key pad side besides the 9v battery so it is pretty waterproof. (could probably be made more waterproof if you add some caulking too)
Great job
Great video!
Glad you enjoyed it
Cool upgrade!!!
It is crooked though and would
Drive me NUTS
The deadbolt lock?
@@DIYSCOTT yeah...maybe I’m just trippin though
Seriously thanks for upload i have to do same and you helped a ton!
@@dumpsterfire6351 Yeah no problem glad it helped. I actually ended up going back a couple days later and fixed the crookedness you arn't trippin hahaha. It's because when I drilled the deadbolt hole I went from both sides and it made it weird so it was tough to get the lock in (which it shouldn’t of been). If you buy the door template consider getting one with decent drill bits because they are made to be drilled through doors and not rough lumber so the bits I use struggled and caused that to happen. Good luck on your project :)
@@DIYSCOTT yup i got a nice Dewalt door kit
Should be great for this job.
Putting a nice lever handle on shed door
Awesome bro thank you
Square work!
Cool
Do you think the lock would work on an existing 2 x 4 fence? I won't be using a handle, just a traditional decorative gate latch so it looks like you might be able to squeeze the keypad part on
I think the lock will barely fit on a 2x4. Also depends on which one you get. A standard deadbolt (not electronic) will fit better
Lots of good info, thanks.
The lock looks wonky?
Yeah, I drilled it bad I ended up fixing it
@@DIYSCOTT
Happens to us all, Scott.
Thanks for sharing your video 👍🏻
How does it handle the ground heaving in -40?
thanks!!!!!!!!!
Yeah! Glad it helped
Dry packing your cement is stronger and easier than wet setting.
Yeah I didn't know you could do that when I made this video. I dry packed a fence since then and it worked great
What brand/type of lock did you use? Thanks for your video.
Schlage Camelot Keypad Deadbolt
Thanks for sharing, but the Schlage lock is only as good as the strength of the gate and your framing. You can enter with just a few kicks to the gate and your frame will crack. But, it looks nice! Also, I had called Schlage and other Smart door lock manufacturers and they do not warranty the normally interior part of the digital lock for exterior use. Smart locks normally sag on wooden gates especially in cold and wet temperatures. I'm curious if a keypad lock has more success on an exterior gate than a Smart one?
Good info to know thanks for sharing!
good points but same could be said about anything. Someone can break in simply by breaking the window in front of the house that everyone has. A kick to that fence and i would say parts of the panels would break and leg going through there before the actual deadbolt/lock breaks. It's just a deterrent and preventive measures. You are right about the interior side as these were meant to be for regular use doors with only the exterior part as weather proof. He is in SoCal so weather doesnt get as extreme there, rain is as extreme as it gets there and temps no lower than 60s maybe mid 50s in the winters. Simple solution as clear caulk around or building a hood above the interior section would suffice. The biggest what if really is overtime how the fence will sag. It's aligned now with striker and latch but as we know with wood fences, gravity will take its toll on the side where dead bolt is at as when its open it is hanging freely with the weight no longer being held by the latch. But its very unlikely it will be open for long periods to make it sag quickly. As long as the section where the hinges are mounted is nice and secure and the posts are good, it shouldnt be an issue. Not very many people have done this or used these smart locks in exterior scenarios and those who have really have only did so in the last year or so. So there isnt enough data on how well they hold up over time.
It would be easier just remove the fence pickets or even break them....
It looks great 👍 , but I would’ve added the extra fence picket where the lock mechanism is and I would’ve not use the wood glue since it makes too much of a mess you would’ve been fine without it.
Thanks. If I remember correctly I think adding a picket there would've made it too thick for the dead bolt
@@DIYSCOTT did you try making a hole around the Gate picket so that you can add the lock. It would’ve looked more presentable. I noticed you mentioned you were from Southern California. I’m from Anaheim.
@@DIYSCOTT Do you have a instagram account?
Nice job on the project! Question, how does the lock work from the back yard? Does the homeowner just turn the knob from the electronic dead bolt?
Thanks! Yeah the handle is independent from the dead bolt but they can lock or unlock the gate by turning the switch/knob thing. You could technically just do the deadbolt without the handle but it would be a little harder to open and close
Great Video. Does the dead bolt keypad is water resistant?
Yes. The keypad side is made for outdoor use and the other side is usually not exposed to the weather but no issues thus far. Thanks for watching!
Hi Scott,
Thanks great video!
Wandering why you cut the 2x4 the way you did vs putting the side ones on top of trop and bottom ones ? Does it make the door stronger?
I am building one for myself tomorrow and really want to do the same way but it will add more time but will do it only if it makes more sense!
Also thank you for the 2x6 trick, it makes great sense. I will apply that to my gate.
One last question why don’t you put one board over the 2x6 to make it look all the same with the rest and cut out a bigger hole to snug in the 2 locks? Thank you again for taking the time in making this video for us!!!
Hi. I don't know remember why I did the frame that way. Mainly for appearance. I think either way should work. You could put a board over the 2x6 but like you said you will most likely have to recess the locks due to the assembly getting too thick. Good luck on your project!
@@DIYSCOTT thank you for the reply! My gate is actually more like an exterior door so I am adding plywood over the frame, black paper and groove and tongue type of wood finish. I am building a storage under my staircase so trying to keep it dry.
I ended up not using your cuts on 2x4 and 2x6 and realized that my screws were much too small. So I had to improvise and use pocket screws (I think they are called) with wood glue. It seems to be pretty strong. After I installed my hinges and set them well I went to make my holes for my lock but realized I did not follow your advise correctly and put the 2x6 on the wrong side. So I had to remove all screws and turn it around so I could move on… I was able to make my holes and can’t thank you enough for that great tip!!!
I will manage to make bigger cuts with a Dremel to sink in my lock. I now have to find a video on how to properly install that black paper!!! I wish I could send you a pick of the door but no option here!! Thank you for your video. I
There's a strike plate that accommodates sagging which will happen eventually Gator Door Stiker
Interesting thanks for the tip!
Noice dude! 👌🏻
Great job! Have u ever done this with a vinyl gate?
I haven't... something hollow might prove more difficult as you need enough structure to support the lock but maybe could be done
i Don"t like it -----------------------------------------I LOVE IT THE BEST I HAVE SEEN I CANT WAIT TO GET STARTED AFTER I BUILD MY TOP PRIVACY FENCE ON TOP OF MY BRICK WALL . thank you
hahaha thank you. Good luck on yours!
Hows the handle and deadbolt holding up? I'm thinking about doing this, but am concerned about corrosion from water getting inside.
It's not my house so idk but I haven't heard anything so I think it is fine still. I would do a little silicone caulking on it if you are worried about it
Is your deadbolt waterproof?
Only the key pad side technically but never had any issues with it
How's that schlage BE365 working out in the rain? I'm thinking of doing this myself but worried it won't be weatherproof enough.
We don't get much weather in Southern California but so far no complaints from the owner. If you are worried about weatherproofing it I would add caulking wherever you can. Not really any electronics on the non-weatherproof side besides the battery and battery cable and caulking could help prevent moisture from getting into the back of the face of the lock. Or do a cover or it like this www.amazon.com/dp/B00HWY4Z8K/ref=cm_sw_r_cp_api_glc_fabc_4xy8FbSJGEJ8K (but I personally don't like the look of it). Hope you find something that works for you!
just get clear caulk and put it around the unit (part on the inner part of the home) no need for the exterior part with the keypad as that was designed to be in the elements. You can also built some kind of hood above the unit on the inside.
I have the same concern living in LA. Still working ok? If anything maybe I'd add a small owning so rain doesn't get to it
I don’t believe those Schlage deadbolts are made to be outside with the electronics possibly getting rained on…
Yeah not 100% recommended but in Southern California we don’t get much weather so no problems yet
Is the keypad water proof? Would like to install one in my side gate
One side is intended for outdoor use (usually goes on the exterior of a door) the other side on the one I used was just a wire going to a 9 volt battery so I'd say it's pretty weatherproof
How much did you spend on the materials? And how long did it take ya?
Also what did you charge them for that?
Took me 2 Days just because I had to concrete in the post. Could be done in an afternoon if you have a good plan. It's just a couple 2x4s, a 2x6 , a 4x4, some fence planks, and a box of screws/staples so I'd say without the lock it would be a little over $100 in materials. But the locks can be another $100+.
That deadbolt doesn't last in the exposed weather. The electronics fail
Hasn't failed yet
Help i have a cedar gate with the deadbolt & sealed it will outdoor sealer/stain yet when we have lots of rain over 2 days or si the wood swells & it won't close!!!! Any suggestions on waterproofing
The owner ended up using: www.homedepot.com/p/BEHR-1-Gal-White-Base-Solid-Color-House-and-Fence-Exterior-Wood-Stain-01101/203223466?source=shoppingads&locale=en-US&mtc=Shopping-B-F_D24-G-D24-24_11_EXT_STAINS_WATERSEALERS-Multi-NA-Feed-LIA-NA-NA-FY21_Exterior_LIA&cm_mmc=Shopping-B-F_D24-G-D24-24_11_EXT_STAINS_WATERSEALERS-Multi-NA-Feed-LIA-NA-NA-FY21_Exterior_LIA-71700000075828152-58700006498658431-92700058687514951&gclid=CjwKCAjwjuqDBhAGEiwAdX2cjzxNs4bshzvxP1gEh4M9cOS8uZ9qOAhBXHOvuhfzfbPO0mCu4G2hShoCYfEQAvD_BwE&gclsrc=aw.ds
I don't know too much on stains, but I'd imagine any outdoor deck or fence stain from your hardware store would do the trick. If your gate doesn't have enough gap though you may want to consider taking off 1/4" on each side because the wood will expand and shrink even with temperature change. Hope this helps. Good luck!
This was awesome Scott. I just put up a gate and as trying to figure out how to make it secure from both sides.
This looks great man. Good work. Carpenter Respect 🫡
Thanks! Glad it helped
Anyone know someone in the Boston area that can do this??
My husband needs to make 4 gates for a client and is trying to determine how many hours to bill. How long did it take you to build and install just the gate?
Yeah depends on a lot of things but if I did it right the first time (used the 2x6 for the lock side) it probably took me two full days to do it right. Once you get past the learning curve though I think you could do 4 of these done in like 3 to 5 days depending on experience. Probably best to do all the concrete first because it takes time to cure. Hope this helps!
@@DIYSCOTT Thanks for the reply but what i'm looking for is how long to build and install ONLY the gate? He is simply replacing existing gates.
@@sueseverson8141 If you build them all at once side by side probably could build them all in one day and hang them the next day.
Many thanks. Please, can you recommend the brand for digital access code pad? I have a list but still searching for most reliable and rain proof. Lockey brand so far.
This is the one I used. Important to keep in mind that most of these looks are designed to only get weather/wet on the keypad side as usually when used on a door the other side would be protected inside. Hope this helps! www.homedepot.com/p/Schlage-Camelot-Keypad-Electronic-Door-Lock-Deadbolt-and-Georgian-Knob-in-Aged-Bronze-BE365-CAM-F10-GEO-716/312594416
How is it holding up? Did you consider putting a cover like this over it: STI 6521S www.amazon.com/dp/B00HWY4Z8K/ref=cm_sw_r_cp_api_glc_fabc_4xy8FbSJGEJ8K
@@ejc3 So far so good. In southern California we don't get too much weather so that could be a factor to consider depending on where you are. On the back side of the lock I used (the part that should technically not be exposed to the elements when installed on a door), the only electronics were the 9volt battery and battery connector wire. Don't hold me to it but I think some silicone caulking would be enough to help increase its durability. The cover would definitely be the safest way to go if it doesn't bother you visually. Hope this helps! Thanks for watching :)
Great build, only suggestion Id have is to have the gate swing off the house and not the fence.
Yup... that never even crossed my mind. Then you wouldn't have to worry about it sagging over time
is that lock supposed to be used for OUTDOOR use????
It is designed for an exterior door. Technically only keypad side is "waterproof" but all the electronics are on that side. Hope this helps!
But what about the rain???
The locks are made to be on exterior side of doors. Works just fine in southern California where we don't get much. Always could add silicone to seal it up more or a cover. Thanks for watching!
Ryob door template
Is this weather proof?
Weather resistant* I'd add some silicone or caulk if you are worried about water intrusion with the electronic keypad
Intro music wayyyy to loud compared to the rest of the video, just fyi
Yeah I must of forgotten to turn it down. In my newer videos I have learned to pay way more attention to audio
most locks are not waterproof. that will not last long in the weather. they make water proof locks for gates
2 years later and still working fine but we don't get much weather in southern california
@@DIYSCOTT im in Georgia where the humidity kills everything. A real lock set is nice to have. im about to do a fence and gate in florida. I am looking at the waterproof kind but im not sure if either will last with the salt air down there.
How waterproof is the locking mechanism?
The keypad part of the deadbolt is designed to be on the outside of an exterior door. The other side just has the battery in it but isn't necessarily designed to get wet. Could make it more waterproof with some caulking if you live in an area that gets lots of weather