08 Chevy equinox 3.4 Water Pump replacement

Поділитися
Вставка
  • Опубліковано 21 січ 2025

КОМЕНТАРІ • 21

  • @mudusad4
    @mudusad4 4 дні тому

    I’ll be using this to replace my water pump tomorrow.

  • @albertoborrero8306
    @albertoborrero8306 Рік тому +2

    simply excellent step by step video on the subject. Many thanks!

    • @Jvcomet
      @Jvcomet  Рік тому +1

      Glad it helped wasn’t the best one of our videos but it will get you by. Thanks for sharing and watching 👍

  • @catherineandjimleclaire9034
    @catherineandjimleclaire9034 10 місяців тому +2

    You literally jumped over the part I needed. I got the belt off no problem. How do you keep the pump from turning after the belt is off to take those 4 screw off for the idler cover on the water pump?

    • @Jvcomet
      @Jvcomet  10 місяців тому +1

      You can use a flat pry bar or screw driver to go between two bolts crack the bolts loose then take them off. Hope that helps and thanks for watching 👍

    • @wyattsho
      @wyattsho 3 місяці тому

      also you could have left the bolts on the pulley before you took the belt off

  • @markdjura2018
    @markdjura2018 Рік тому +1

    What you mean by glue it on it,what glue?

    • @Jvcomet
      @Jvcomet  Рік тому +2

      So I put a little very fine skim of black weatherstripping cement (glue) to hold the gasket in place so it won’t move on me while installing the pump. 😎 thanks

  • @Black3141
    @Black3141 2 роки тому +1

    How show the location of the Expansion freeze plug on this model truck

    • @Jvcomet
      @Jvcomet  2 роки тому

      I actually have the truck back here for something else I’ll check for you

  • @Black3141
    @Black3141 2 роки тому +1

    Can’t find a single video of the location of the expansion frezzze plug for this model

    • @Jvcomet
      @Jvcomet  2 роки тому

      So I checked again there are no Freeze plugs as far as I could see like the OG cars had freeze plugs

  • @TerrellRiFic3
    @TerrellRiFic3 Рік тому +2

    Good video. Thanks

    • @Jvcomet
      @Jvcomet  Рік тому +2

      Thanks for watching ..appreciate it

  • @kevinfultz1908
    @kevinfultz1908 Рік тому +1

    Hopefully this dude didn't quit his daytime job.
    He's all over place. No size of socket and bad camera.

  • @myrondabal
    @myrondabal 2 роки тому +6

    This video skipped many steps that I wanted to see such as how much torque for water pump screws which is extremely important.

    • @Jvcomet
      @Jvcomet  2 роки тому +1

      Sorry about that I had most of the work done before videoing

  • @MauricioGarcia-zk2ei
    @MauricioGarcia-zk2ei Рік тому +1

    Good

  • @jhitt79
    @jhitt79 10 місяців тому +1

    So…. Reading through some of these comments it seems that some of these commenters shouldn’t even try to put air in their tires let alone do a simple job like this.

  • @eugenefernandez3351
    @eugenefernandez3351 Рік тому +1

    👍👍👍👍👍

  • @ryanboyer1156
    @ryanboyer1156 4 місяці тому

    terribkle view