I wanted to update you on the fuel line repair on my blazer ZR2, started this morning as one of the factory steel lines were corroded and squirting fuel, did everything you explained with the hose and clamps, cut out the rusted piece but thier were 2 additional lines side by side, 3 total, as I was finishing the other 2 started leaking lol, long story short, fixed them the exact same way and no leaks, drove it about 30 miles today and doing great. I couldn’t be more pleased as the gas fumes were getting to me haha, total cost for hose and 6 clamps under $20 bucks, thanks for sharing your knowledge and saving me money i really didn’t have to pay the big mechanics, I truly appreciate your channel 👍
Outstanding!!!! That is Awesome!!! We really appreciate you taking the time to share this Jamie. That’s a great feeling accomplishing your DIY project, well done. We are always here to help answer questions, hopefully many stress free days ahead for you. Enjoy your weekend Jamie. 😎👍
I love UA-cam for this kind of stuff. This fuel line repair could have cost in the upwards of $600 if done by a local garage. It just cost me $12. Leak is fixed!!! It's an old car, do I care if it doesn't get an original hose replacement? Hell no. Thank you for sharing this simple but useful advice.
Colin Genereux Hot Diggity Dog that's great news! Thanks for checking out the video and sharing your experience...You Rock! That rubber hose is very reliable. Please Subscribe to the channel that would be awesome thanks again 😎👍
yea tell me about it this fucken mechanic want's to charge me $345.00 so i told him im not paying that much for 1hour work & 2.00 of material these fucken mechanics are freakin wakos . what would you do in my case would you pay or not ! i didn't i told him that unless he comes up with a better price im not giving him a dime & on top of that he didn't give me a price before hand
Lol....that's so awesome. I'm glad it helped...this is definitely an amazing alternative. Thanks for commenting, Subscribe to the channel if you're up to it.
Just did this on a 1993 Nissan Maxima and it cost me 5.28 for some fuel hose and a couple of clamps. Very easy to do and took around 30 minutes. Thankfully it worked as Nissan doesnt make fuel lines for that car anymore!!! And yes youtube is great for stuff like this, thanks for posting!
the variablex Awesome Awesome & you are very welcome. Thanks for watching & sharing your experience. You Rock! Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Wow 4 years old and I’m having a issue with a leaking fuel line on 88 caprice in 2020 and u just saved me a big headache trying too get that metal fuel line in the vehicle thanks a ton you definitely earned a subscriber
Thanks so much for having this video uploaded on UA-cam.. I found it to be helpful. A while back on my first used car, one of the rubber fuel lines had a rip in it and I lost all of my gas. :( I replaced it the same way, with a rubber hose. It worked flawlessly. I didn't have trouble the remaining years I had the car. Now, I have another used car and one nylon plastic fuel line was bad. I used a rubber hose, to attach to the nylon plastic fuel line after I cut it. I had messed up slightly and I had a lot of trouble taking the rubber hose off from nylon plastic fuel line. That was a good sign that it was stuck on there pretty good with the barb gripped adapters. If it could withstand me trying to pull it apart, it should be able to withstand high fuel pressure with no problem too. I used those metal clamps too with flathead screw on it, just to be sure. I have a good feeling that quick fix aint going to fail so easily on it's own. I'll be putting my gas tank back on later today. Oh yeah the barb adapters and rubber hose was like $12 all together. I already had metal clamps.
The Viewer That’s awesome! We love hearing experiences like yours! We also have had great luck with this style of rubber hose! We were on our way to town one morning & same thing happened to us...lost all the fuel 😆 We put this hose on, clamped it in place, & it also worked flawlessly for the remaining 2 years we owned the car! Thanks again for sharing your experience! We love stories like yours! 😎👍 Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
What he should say is: buy "FUEL INJECTOR" hose, not just reinforced "rubber" hose. Also use FUEL INJECTOR HOSE clamps. not just normal screw hose clamps. I like his comment about flaring the end of your metal, helps to keep hose from slipping.
typhoon320i Thanks for watching & we hope the video helped. We appreciate you sharing your thoughts. 😀👍 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Ms. Lee Very cool & we appreciate you watching & sharing your experience! We are happy to hear the video helped! Let us know if you have any questions, we are here to help! Also, below is a link to our ( How To Fix Cars ) Video PlayList. It contains several videos that you can benefit from including additional videos on fuel system. Definitely check it out! ua-cam.com/play/PLjCXOz8TSkZnavDiGDyHdPKe2dV2RzEMZ.html Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Great how to video ! Just alittle extra to your video : People If your replacing your rusted lines with rubber hose Please do your homework on the PSI of your lines Many people rush out and buy Rubber fuel lines from Hardware stores Only to find they are not for fuel injection cars However they are for Lawnmovers and other low PSI engines And will burst after little use. The line should say "Fuel injection" with a rating on it Clamps : If you go with normal gear worm clamps Double up on each line end But DO NOT over tighten them As they will dig into the rubber and spilt it Or you will warp the clamp And it will not seat and loosen over time A better line would be Nylon line : A little more money And more of a level 2 backyard mechanic of work to install You will need to be able to insert connectors into the lines which are very tight fitting And need to be pre-heated and lubed to insert And then sealed The final is that it has a very good PSI rating, Does not rust, And does not dry up and crack over time like rubber lines
freakyflow Thanks for watching & we really appreciate your info. That is awesome & this info will be very helpful to future viewers. We can’t thank you enough for taking the time to share your thoughts! 😀 We really enjoy making these helpful videos for our fellow DIY’ers. Many more DIY videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
just spend 30$ and fixed my rusted fuel part on 2002 honda accord it took about 30-45 min. Mechanics asked over 200$ to fix it. Thank youtube! Shame on mechanics who trying to rob ppl with no knowledge.
Girl Scout Cookie Very cool & we are happy to help. Thanks for watching. Just prior to making this video, a friend told me that the MX shop quoted $400.00. Well...we fixed it for less than $15.00 & it has lasted years...& is still working great. 😀👍 Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Good stuff. Make sure though you use the right rating for what you need. SAE 30R6 and 30R7 are for carbureted systems, low fuel pressure systems, or fuel-injection systems that produce pressures lower than 50 psi. Anything higher should use SAE 30R9 which can hold up to 180 psi and 300 degrees.
I would use the proper sized constant tension clamps instead of worm clamps they are not much more expansive and would make it easier, the later may leak with improper tensioning and/or cut into the hose if overtightened and also doesn't take into account thermal expansion/contraction
Daijoubu Thanks for checking out the video and sharing your comment..this will definitely help future viewers. We really appreciate it! Please subscribe to the channel that would be awesome thanks again. 😀👍
sdwarrenwarren Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
This is exactly what I'm doing for my dad's gmc everything is just so rusted dropped the tank because the feed line rusted out got a new fuel pump and cleaned the tank I took all lines off and replacing with rubber fuel hoses and hose claps it looks good and if something else happens it's easier to deal with that rusted line and the plastic fuel clips
Very cool & we appreciate you sharing this. Sounds like you’re busy however for a good cause. Let us know if you have any questions, us fellow DIY’ers need to stick together! 😎👍🔧🔩
Ozzstar Very cool & you’re spot on! We appreciate you reaching out to us! We really enjoy making these helpful videos for our fellow DIY’ers! 😀 Thanks for subscribing & don’t forget to turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! We subbed back! Keep up the awesome work. Your channel is awesome! 😎👍🔧🔩
Definitely will be doing this rusted fuel rail hose right under my drivers seat I honestly believe I had it for a long time and it finally showed itself in the winter
Those types of clamps don't work around braided nylon hose from the fuel filter to either end of the gas line going to the engine or to the tank i get it so tight then those cheap clamps pop then i say its stripped then take the clamp off and try another and it pops because they're cheap clamps not made to hold gas lines on they'll work on a riding mower and other stuff but don't on nylon hoses
ive done this works great i also did it on my old crown vics transmission line as it had started leaking it worked great on that to i worked the hose pretty far on both sides of metal tubing and double clamped never had a leak or problem with it after that always the plastic clamped areas that leak.
Jesse Krucek Awesome Awesome & thanks for sharing Jesse. We appreciate you watching & we hope you enjoyed the video. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
What i learned is shove the gas line on farther and use 3 or 4 good hose clamps my gas filter nipples are 3/8 then the steel gas line is i believe between 5/16 it says its 5/16 on the truck parts but its not on the truck i matched up the 5/16 hose i have the hose looks a tiny bit bigger than the line so I'll figure something out So put your new rubber Briggs gas line on the existing gas line about 3 inches over the line and clamp put you some lubrication on the metal line first so it'll slip on good then you can clamp it up But i read and seen that the fuel injection hose clamps work good on braided fuel line im about to see if it really does or was those reviews i read lying about the those clamps i have to do ours this way i don't own every tool to make it the right way a crimper
Thanx for the video bud. BUT I would suggest not do this on a pick up truck, the pressure is much greater than on a smaller vehicle like a toyota it may work for a short time, but is causing a potentially dangerous situation in the near future.
Thanks for checking out the video and sharing your comment! This is a great alternative & It’s important to refer to your owners manual/specs to obtain your specific fuel line pressure limits. It’s also a good idea to contact your local dealership to verify psi limits! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩
Very helpful video, thanks man!! So my 02 blazer ZR2 started spraying fuel behind the driver side tire, when the vehicle isn’t running it doesn’t leak luckily but once I start it the pressure allows it to start spraying, I can actually see the metal line dripping/spraying, gonna give this a shot, wish me luck lol. Ps, thanks again 👍
Thanks for watching & welcome to the DIY Raptor Club. Awesome idea making it a DIY project. We are standing ready to help answer questions as you work through project. Keep us posted. 👍
@@DIYwithMichaelBorders i found some 350 psi Russell blue braided hose at auto zone that says it is specifically for fuel, anti freeze etc plumbing, so I’ll be visiting auto zone today to grab a piece and some clamps, ready to get this done lol.
Thanks for watching & welcome to the DIY Raptor Club. These rubber lines are a great replacement option for many people. Keep us posted on your project. 😎👍
It's worth noting that this rubber fuel line is used in aviation. My only comment is that there are specific fuel hose clamps. Those in the video will suffice but for a few bucks more.....
Pete Smith Thanks for watching & we hope the video helped. We appreciate you sharing your thoughts Pete, that’s awesome! 😀 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Brian Rizzi Thanks for watching Brian, great question! We used our awesome Pex-Pipe cutting tool to cut this! It makes a perfect clean cut. We definitely recommend purchasing this tool. Below is a link to a video we made reviewing & showing our Pex-Pipe cutting tool in use....definitely check it out! ua-cam.com/video/NhbeLUfsVE8/v-deo.html Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Melvin Riddick Very cool & thanks for sharing your comment. We appreciate it. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Lloyd Dailey Thanks for watching Lloyd. We used a PEX pipe cutting tool. It works perfectly & is extremely sharp & gives a perfect cut. There are many more ways to conveniently cut this type of hose. Thanks again for watching! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching, you can use fuel specific clamps. We will put a few options below. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/44R6d60 amzn.to/3P3DqFg amzn.to/487Mulm 😎👍
I really hope you still reply. I’m having issues with a Buick constant fuel line. The ones one the engine. Thing is that the front hose it’s made of aluminum and rubber and I just can’t connect the new connector in. I try heating it and it bubble the outside of the hose. Try boiling it and nothing . I can just cut the whole line but idk if it will make a difference since the old hose it’s made out of aluminum and rubber on the outside . Or i can buy the repair kit but I would still be trying to get the hose to connect . Any advice ?
Oscar Thanks for watching & sharing your experience Oscar. Great question & let’s get this figured out! These rubber hoses are great & extremely convenient & friendly on the bank account. It’s very possible that you will need the next size up hose. We recommend visiting your local AutoZone & purchasing the hose. It’s very important that you purchase actual fuel pressure rated hoses with the braded design as shown in this video to ensure proper reliability. AutoZone will have a few different sizes & you may find it easier to purchase a few different size hoses & use what fits & return what doesn’t. Let’s start there, keep us posted! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again Oscar! 😎👍🔧🔩
My Tacoma puch-lock got discinnected on it's own?? I puch it bacl into the line and I wonder if I could just cut the puch-lock part and do the same, clamp it up.
We sure are and thanks for watching. Sizes range from 1/8” - 5/8” with 1/4” being the most common. Best thing to do is cut away the bad portion of your brake line and take it with you to your local AutoZone where they can match it to the size best suitable for your system. Keep us posted on your DIY project.
Thanks for watching, we definitely hear you. 😁 Below are a few helpful videos on brake line options. ua-cam.com/video/4F4Lu-XaGwM/v-deo.htmlsi=dgnkJilsoDaMH3n_ ua-cam.com/video/2mDp5pEsuK4/v-deo.htmlsi=_-Vz-GM1y5SiZ-f3 ua-cam.com/video/Zj3HfNOZsxI/v-deo.htmlsi=MsSqNnnV44RYxF22 👍🧰
Ross Munn Thanks for checking out the video Ross. That’s a great question and asked a lot. As you know, the fuel system is a pressurized system during operation...it is always recommended & safer to Double Flare the tips. This is because it creates that additional “lip” for a more secure connection. It’s very possible that AutoZone will rent you the Double Flare kit for free. Keep me posted on your repair. Please subscribe to the channel and turn on your UA-cam notifications that would be awesome thanks again Ross 😎👍 Below is a link to a video that talks a little bit about Double Flare... ua-cam.com/video/2mDp5pEsuK4/v-deo.html
Thanks, good information. I like the idea of the rubbere hose, an easier fix and less money. I'll check out what you suggested. Thanks for the reply and your video. Regards, Ross
Thanks, good information. I like the idea of the rubbere hose, an easier fix and less money. I'll check out what you suggested. Thanks for the reply and your video. Regards, Ross
master Beast Awesome Awesome & you are very welcome! Thanks for watching! Keep us posted with any questions you may have. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Hey man what should I do if most of my pipe line is rusty. I don't think I see a non rusty part can I just do it over a rusty pipe as well? Or has to be clean? Asking because it seems I can't find replacement for my car.
Dave Nonyabiz Awesome & we find this to be a great option. Keep us posted. Please subscribe to the channel and ring your UA-cam bell 🔔 this Will be very helpful to us thanks again. 😎👍🔧🔩
did this yesterday, worked great for me so far. $14 fix versus im sure over $500 at a mechanics shop. I flared the tubing ends a bit for an added pressure point and used double clamps at each end.
Dave Nonyabiz Awesome Awesome & that’s great to hear. Our rubber hose is still going strong. An incredible option to have. Thanks for reaching back out to us Dave. 😎👍🔧🔩
One would think the A$$holes at the OEM could design and build cars with rubber fuel lines instead of metal fuel lines that will last the life of the car. But then how are they going to steal the consumer's hard earned money if they do that? and how are the dealerships and auto repair shops going to stay in business? Thanks for sharing great ideas and not get ripped off.
maxim jones Thanks for watching & we appreciate you sharing your thoughts. Makes you wonder...🤔 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
So sorry for the delay. I used this hose and clamps on a 1995 Toyota Celica just shy of 4 years ago and NO LEAKS at all. I am very pleased with the easy and inexpensive alternative repair. Please Subscribe to the channel that would be awesome thankless again!
it is not fine to install rubber hose with non flare metal fuel line pipe, don't mislead people, it is a matter of safety do the job well or let a mechanic do it for you, if the fuel line leaks and shoot toward the muffler, it may cause fire burn and may cause the whole car to get burned to the ground, you have to flare the metal pipe, no way around, before installing the rubber hose and then secure with clamps, behind the flare that will prevent rubber hose from slipping by pressure, if you don't flare the pipe, you will risk that the rubber hose will get slipped out by pressure, anytime.
Hunter Hying Thanks for watching & sharing your comment. You Rock! Please subscribe to the channel and ring your UA-cam bell 🔔 this will be very helpful to us thanks again! 😎👍🔧🔩
Matthew R Thanks for watching & we purchased this hose at our local AutoZone. It comes in a roll & can be cut to fit your desired length. This hose is a great replacement for rusty leaking fuel lines. Let us know if you have any additional questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
DIY With Michael Borders well, whats the easiest way to cut a fuel line? I have an 09 cobalt ls coupe. The rotted fuel line is located near the back of the car, by exhaust on a plastic clipping
Matthew R Thanks for reaching back out to us. Great question! You can purchase an awesome Fuel Line Cutting tool at AutoZone for a friendly price. We definitely recommend it! 😎👍🔧🔩
MrBrocephus Thanks for watching & great question. We haven’t used this style hose for connecting to carburetor. We recommend using this style hose more downstream of fuel lines. Let us know if you try it & how it works. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@@ericdeicaza8438 Thanks for watching. We would recommend routing the new hose in a position where it doesn’t make direct contact with the exhaust and muffler system.
My gas line got cut to substitute it I put a Piece of water hose and put a gallon for gas in it and still won't start should i put more gas or something else
assbitchfuck6927 Thanks for watching. What’s your update? How did your line get cut? Let us know if you have any questions. Us fellow DIY’ers need to stick together! Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
85 Toyota4. Wheel drive do take on gas tank to get to the break line under the truck close to the rear where they line goes over the gas tank I'm handicapped and on disability and trying to do this myself could you please help me and where is the RBS module under the truck so I will know where to start bleeding my line if I get that far thank you and Happy Father's Day
Finley Perkins Thanks for watching Finley. This specific rubber hose is for fuel line replacement. It’s designed to withhold the ethanal in today’s fuel. We do not recommend using this style hose for your project! Hope this helps! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩
I'm thinking about doing the same thing I guess my question is I just have to buy new couplers and plastic connectors to connect the fuel pump all the way to the front of the engine? How many rubber hoses would I need to buy for a 1997 Pontiac Firebird?
Jeff Wardlow Thanks for watching & great question. We recommend purchasing a brand new roll of hose. You can purchase rolls at your local AutoZone...you may find it best to purchase a roll of hose & then measure out what you need at home & cut the hose to your liking. Also, at the front near the checkout computers at AutoZone are little hose clamps. We recommend purchasing the clamps that have the little tightening bolt on them. These clamps are very inexpensive & very reliable. Keep us posted on your DIY project. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
jimmy Jam Thanks for watching & we hope you enjoyed the video. We haven’t used those products on brake or fuel lines/connection points...🤔 The best people to ask is your local AutoZone employees. Keep us posted on your project as we are curious what you find out. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😀👍🔧🔩
@@DIYwithMichaelBorders I cut the line out where it was leaking. Discovered another leak while working on it and took that length out as well. The problem on these chevy's is they clamp the gasline in place with a plastic brackets which they probably do for safety and what happens is salt, sand, grit, build up and eventually wear a pin hole into the metal line. I used your rubber hose method and for what I use that truck for it works. Thank you for the video.
jimmy Jam Thanks for the update, sounds like you’ve been busy. Great job! 😀👍 We also have found the replacement hose option to be very friendly & beneficial. 😎👍🔧🔩
Hey, What is a good way to cut the fuel lines? Its tight so I can't really get a hack saw under there, and I don't really want to bring out the angle grinder here...
Thanks for viewing and commenting. Great question and I have the the answer.....I use a Kobalt 1-1/4 Inch Hand cutter....( Part #: 0150944 ).....you can get this cutter @ your local Home Depot or Lowes. Subscribe to the channel if you're up to it thanks again!
Jak Bayano Thanks for watching & great question. You will want. to make sure that you purchase fuel rated rubber hoses. This will ensure that your rubber hose can withstand the pressure of your fuel system as well as the chemicals and additives inside your fuel. As far as size, you can use the portion of fuel hose that you removed from your vehicle to match the correct size of hose to buy. AutoZone can definitely be a great help. Let us know if you have any questions. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching & this is the standard USA 3/4 hose. This can be purchased at your local AutoZone. Great product. Keep us posted on your project, enjoy your day. 😎👍🔧🔩
LAKINGSSUCK Thanks for checking out the video and sharing your comment. Great info & will help viewers. We hope the video helped. Please subscribe to the channel and turn on your UA-cam notification bell that would be awesome thanks again 😎👍🔧🔩
DriftCannon Thanks for checking out the video and sharing your comment DriftCannon! So glad the video helped. This is definitely a good option when encountering fuel leaks and rusty lines. Never fun dealing with rusty fuel/Oil line leaks! Please subscribe to the channel and turn on your UA-cam notifications that would be awesome thanks again! 😎👍
Please don't use those garbage clamps and get the ones that are meant for pressure lines. The ones installed on my vehicle are leaking and, of course, they installed them to where the nut is hard to access to remove them *sigh*.
Thanks for watching & welcome to the DIY Raptor Club. Great car, really made us proud. 😁👍 Let us know if you have any questions, us fellow DIY’ers need to stick together. 😎👍🔧🔩
Thanks for watching & welcome to the DIY Raptor Club. Below is a link to our video showing the exact tool we use to make a clean cut on the new hose. ua-cam.com/video/NhbeLUfsVE8/v-deo.html 😎👍
cody smyth Thanks for watching. Glad to help. If you are replacing your old fuel lines with new lines, they are all very similar. This rubber hose option is a great way to fix a small rusted portion of hose. If you’re replacing your line from inside the engine compartment all the way back to the rear brakes, you will want to use actual replacement lines as opposed to rubber hoses. Keep us posted on your project! 😎👍🔧🔩
Thanks for the video. Some folks use gas tank additives like Gumout, Seafoam, etc. Any concerns that these products could compromise the replacement line material?
youeweu Thanks for watching & depends on who you ask. Seems like each product has its pros & cons. Our rubber fuel line is still working as designed & we have added fuel additives a few times over the years. Great product for a friendly price. Hope the video helped. 😎👍🔧🔩
I'm wondering why the car manufacturers bother nstalling expensive steel fuel lines instead of the cheaper rubber line like you describe...there must be a reason.
The steel lines last longer. The rubber lines provide a more economical friendly option for vehicles however can lead to dry rotting over years rather than rusting. The rubber hose MUST EPA certified due to the ethanol in gas. Ethanol can eat the hose if you buy a non-EPA approved line 😀👍
Nick Sw Thanks for watching Nick. We appreciate you reaching out to us. This hose is pretty universal & should work great on your 2007. Keep us posted on your DIY project & any questions you run into. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
mrsemifixit Thanks for checking out the video. I have had fuel hoses on a vehicle for 5 years and I live where there are lots of temp changes as well sad lots of salt and snow. So it's a great product. You can purchase lines at AutoZone 😀👍
Michael Borders Im conflicted though because I've read you shouldn't use anymore than 6 inches of the hose because gas breaks it down over time. Would 5 feet of it be safe?
Anita Frazier Thanks for checking out the video. This rubber hose can be used to substitute a portion of the fuel line. This can be used in your situation as long as you don't feed it into the tank itself. Subscribe to the channel that would be awesome thanks again 😀👍
this is where my fuel pump is the big bolt is stripped I need to cut it off _lh3.googleusercontent.com/KDoUEVpUfGqLz8Iy6RB7zAbpKmT4XMVQbq0MTw8d3ZcEZUWbzwIQHwNywvvzypUR-ozgg4jp1xk_
Kid FLASH You are so welcome & we really appreciate you taking the time to reach out to us and share your comment! That’s awesome! Let us know if you have any additional questions! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching & you can purchase specific hose for trans cooler. It will be very similar to the hose shown in this video. AutoZone may be a good place to purchase it. 😎👍🔧🔩
@@DIYwithMichaelBorders i have a 2000 chevy blazer and one of the cooler lines is leaking only when the car is running. So i believe its the lower line....
Logan Stewart What’s up Logan. Thanks for checking out the video. Hope it helped! Please subscribe to the channel and turn on your UA-cam notifications that would be awesome thanks again Logan you Rock!
Logan Stewart Very cool...I chose the connections clamps that have the 8mm bolt...as shown in video. I really like these clamps. This allowed me to tighten the clamps to my satisfaction. As you know, your fuel system is a pressurized system while engine is running...and because of that, I stayed away from the clamps that don’t have self-tightening capabilities. Keep me posted Logan 🔧🔨🔩😎
Logan Stewart I used a Flaring Kit that I purchased at AutoZone. I Double Flared the tip. Flaring is pretty simple...you’ll just need the kit...it’s possible that AutoZone will rent the kit..I’m not sure though. Below is a link to a video that shows us using the Kit. ua-cam.com/video/2mDp5pEsuK4/v-deo.html
Jeff Leblanc Very cool & you are spot on. We appreciate you sharing your thoughts. Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Well i have a motorcycle that had rust in tje gas tank in it so i cut the lines off because they wouldnt come off i needed them off put vinegar and dog chain in it let it sit for a couple days and shook it up so i need new lines now lol
Dats pretty sweet bruh Thanks for watching & we hope the video helped. Definitely keep us posted on your project. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Derek Pelle Thanks for watching & sharing your experience! Let’s get this figured out together! A few things come to mind & it’s very important that we get this figured out...driving a vehicle with a fuel leak raises concern 😲 First, we recommend doing an inspection for all fuel lines & verifying that you see no leaks. If no leaks, let’s move onto the next stage! Below are a few links to videos that show several options it may be. Definitely check these out! Lets get your fuel smell / possible leak taken care of. ua-cam.com/video/2cVUIvFWJ5s/v-deo.html ua-cam.com/video/QZZdqQRKH6M/v-deo.html ua-cam.com/video/khlkHZAoBp4/v-deo.html ua-cam.com/video/gTlZrDhlTM4/v-deo.html ua-cam.com/video/dq9XZe9Hx-M/v-deo.html ua-cam.com/video/dIUagAd39_c/v-deo.html ua-cam.com/video/tSV7L2MFuWo/v-deo.html Let’s start there! Keep us posted! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Derek Pelle I drive an HHR (basically the same as a cobolt) and I have a leak in the exact same spot on my car. Gonna try to repair with rubber hose tonight. Did you get yours fixed?
@@reederk091 no i have not everyone keeps telling me not to patch because the cobalt has about 80 psi line but i am going to try and fix it in the morning
reederk091 Thanks for watching & sharing your experience. This is definitely a great & friendly DIY project. We fixed ours & it’s worked great for a few years now. Definitely keep us posted on your project! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
fat jack Gaming Thanks for watching! This is definitely a great option for replacing fuel lines. We highly recommend referencing your owners manual & verifying the proper fuel system pressure. After obtaining this info, you’ll be able to visit your local AutoZone & purchase the proper rated psi hose. Keep us posted! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
EarDrugzTV Thanks for watching! Hope the video helped. We appreciate you taking the time to reach out to us and share your comment! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩
VICTOR MANUEL Very cool & you are very welcome! We are always here to answer questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
DJ Allen Its best to Flare your fuel line tip. I have a few videos if you visit my playlist "How to fix cars" and click on video that shows how to Bubble / Flare fuel lines. 😀👍
leadweight guy Thanks for the reply, I flared the end of the hard line that connected to the rubber hose. This gave the hose a flare lip to secure itself to as well as gave the clamp something to firmly rest against. HOWEVER....I inly did that once and just firmly secured clamps over hose and onto hard line and never ran into a leak. A friend of mine ran into a leak when he over tightened the clamp on the hose and the clamp ate through the hose causing leak. All and All I love this rubber hose option as it's extremely friendly when maneuvering in and out of small areas as well as having to bend, twist, and finagle those lines into position haha. Subscribe to the channel if you're up to it. Thanks again!😀👍.
I wanted to update you on the fuel line repair on my blazer ZR2, started this morning as one of the factory steel lines were corroded and squirting fuel, did everything you explained with the hose and clamps, cut out the rusted piece but thier were 2 additional lines side by side, 3 total, as I was finishing the other 2 started leaking lol, long story short, fixed them the exact same way and no leaks, drove it about 30 miles today and doing great. I couldn’t be more pleased as the gas fumes were getting to me haha, total cost for hose and 6 clamps under $20 bucks, thanks for sharing your knowledge and saving me money i really didn’t have to pay the big mechanics, I truly appreciate your channel 👍
Outstanding!!!! That is Awesome!!!
We really appreciate you taking the time to share this Jamie. That’s a great feeling accomplishing your DIY project, well done.
We are always here to help answer questions, hopefully many stress free days ahead for you. Enjoy your weekend Jamie.
😎👍
@@DIYwithMichaelBorders hey, thanks buddy! You and the family have a great weekend, I truly appreciate everything 😊
@@jamiel3504
Thank you so much, looking forward to watching a lot of football. 😎👍
I love UA-cam for this kind of stuff. This fuel line repair could have cost in the upwards of $600 if done by a local garage. It just cost me $12. Leak is fixed!!! It's an old car, do I care if it doesn't get an original hose replacement? Hell no. Thank you for sharing this simple but useful advice.
Colin Genereux Hot Diggity Dog that's great news! Thanks for checking out the video and sharing your experience...You Rock! That rubber hose is very reliable. Please Subscribe to the channel that would be awesome thanks again 😎👍
yea tell me about it this fucken mechanic want's to charge me $345.00 so i told him im not paying that much for 1hour work & 2.00 of material these fucken mechanics are freakin wakos . what would you do in my case would you pay or not ! i didn't i told him that unless he comes up with a better price im not giving him a dime & on top of that he didn't give me a price before hand
Colin Genereux
Yea that's 2 bills don't make a dam bit of sense going to a shop
@@DIYwithMichaelBorders how can I tell the amount of pressure to determine the style of Hose I need for a 98 GMC Suburban 1500 4 wheel drive?
Thank you so much...my stress level went from 80 down to about 10. This is soo much easier.
Lol....that's so awesome. I'm glad it helped...this is definitely an amazing alternative. Thanks for commenting, Subscribe to the channel if you're up to it.
After reading your comment my boner went from level 1 to level 2
Just did this on a 1993 Nissan Maxima and it cost me 5.28 for some fuel hose and a couple of clamps. Very easy to do and took around 30 minutes. Thankfully it worked as Nissan doesnt make fuel lines for that car anymore!!! And yes youtube is great for stuff like this, thanks for posting!
the variablex
Awesome Awesome & you are very welcome. Thanks for watching & sharing your experience. You Rock! Let us know if you have any questions, we are here to help!
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Wow 4 years old and I’m having a issue with a leaking fuel line on 88 caprice in 2020 and u just saved me a big headache trying too get that metal fuel line in the vehicle thanks a ton you definitely earned a subscriber
Thanks so much for having this video uploaded on UA-cam.. I found it to be helpful. A while back on my first used car, one of the rubber fuel lines had a rip in it and I lost all of my gas. :( I replaced it the same way, with a rubber hose. It worked flawlessly. I didn't have trouble the remaining years I had the car. Now, I have another used car and one nylon plastic fuel line was bad. I used a rubber hose, to attach to the nylon plastic fuel line after I cut it. I had messed up slightly and I had a lot of trouble taking the rubber hose off from nylon plastic fuel line. That was a good sign that it was stuck on there pretty good with the barb gripped adapters. If it could withstand me trying to pull it apart, it should be able to withstand high fuel pressure with no problem too. I used those metal clamps too with flathead screw on it, just to be sure. I have a good feeling that quick fix aint going to fail so easily on it's own. I'll be putting my gas tank back on later today. Oh yeah the barb adapters and rubber hose was like $12 all together. I already had metal clamps.
The Viewer
That’s awesome! We love hearing experiences like yours! We also have had great luck with this style of rubber hose!
We were on our way to town one morning & same thing happened to us...lost all the fuel 😆
We put this hose on, clamped it in place, & it also worked flawlessly for the remaining 2 years we owned the car!
Thanks again for sharing your experience! We love stories like yours! 😎👍
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
What he should say is: buy "FUEL INJECTOR" hose, not just reinforced "rubber" hose. Also use FUEL INJECTOR HOSE clamps. not just normal screw hose clamps. I like his comment about flaring the end of your metal, helps to keep hose from slipping.
typhoon320i
Thanks for watching & we hope the video helped. We appreciate you sharing your thoughts. 😀👍
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come.
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Thank you SO much for making this video. My mechanic told me my fuel line needs to be replaced.
Ms. Lee
Very cool & we appreciate you watching & sharing your experience! We are happy to hear the video helped!
Let us know if you have any questions, we are here to help!
Also, below is a link to our ( How To Fix Cars ) Video PlayList. It contains several videos that you can benefit from including additional videos on fuel system. Definitely check it out!
ua-cam.com/play/PLjCXOz8TSkZnavDiGDyHdPKe2dV2RzEMZ.html
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Great how to video ! Just alittle extra to your video : People If your replacing your rusted lines with rubber hose Please do your homework on the PSI of your lines Many people rush out and buy Rubber fuel lines from Hardware stores Only to find they are not for fuel injection cars However they are for Lawnmovers and other low PSI engines And will burst after little use. The line should say "Fuel injection" with a rating on it
Clamps : If you go with normal gear worm clamps Double up on each line end But DO NOT over tighten them As they will dig into the rubber and spilt it Or you will warp the clamp And it will not seat and loosen over time
A better line would be Nylon line : A little more money And more of a level 2 backyard mechanic of work to install You will need to be able to insert connectors into the lines which are very tight fitting And need to be pre-heated and lubed to insert And then sealed The final is that it has a very good PSI rating, Does not rust, And does not dry up and crack over time like rubber lines
freakyflow
Thanks for watching & we really appreciate your info. That is awesome & this info will be very helpful to future viewers. We can’t thank you enough for taking the time to share your thoughts! 😀
We really enjoy making these helpful videos for our fellow DIY’ers. Many more DIY videos to come! 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
this is so great thank you- been a pain in the ass trying to think about all these different fittings - cut em all out!
@@dantheman4585
We appreciate you writing us, thank you. We are honored to help. 👍🧰
just spend 30$ and fixed my rusted fuel part on 2002 honda accord it took about 30-45 min. Mechanics asked over 200$ to fix it. Thank youtube! Shame on mechanics who trying to rob ppl with no knowledge.
Girl Scout Cookie
Very cool & we are happy to help. Thanks for watching. Just prior to making this video, a friend told me that the MX shop quoted $400.00.
Well...we fixed it for less than $15.00 & it has lasted years...& is still working great. 😀👍
Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Good stuff. Make sure though you use the right rating for what you need. SAE 30R6 and 30R7 are for carbureted systems, low fuel pressure systems, or fuel-injection systems that produce pressures lower than 50 psi. Anything higher should use SAE 30R9 which can hold up to 180 psi and 300 degrees.
Thanks for watching & sharing your advice. Any & all helpful info is greatly appreciated. Hope all is well.
😎👍🔧🔩
W comment
I would use the proper sized constant tension clamps instead of worm clamps they are not much more expansive and would make it easier, the later may leak with improper tensioning and/or cut into the hose if overtightened and also doesn't take into account thermal expansion/contraction
Daijoubu Thanks for checking out the video and sharing your comment..this will definitely help future viewers. We really appreciate it! Please subscribe to the channel that would be awesome thanks again. 😀👍
This is best way to do a patch but should use the high pressure hose clamps
Tyler Kemper
Thanks for watching Tyler. Us fellow DIY’ers need to stick together.
😎👍🔧🔩
I just did this on my 05 Duramax fuel cooler feed line. Lol thanks man for the great video
sdwarrenwarren
Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
This is exactly what I'm doing for my dad's gmc everything is just so rusted dropped the tank because the feed line rusted out got a new fuel pump and cleaned the tank I took all lines off and replacing with rubber fuel hoses and hose claps it looks good and if something else happens it's easier to deal with that rusted line and the plastic fuel clips
Very cool & we appreciate you sharing this. Sounds like you’re busy however for a good cause.
Let us know if you have any questions, us fellow DIY’ers need to stick together!
😎👍🔧🔩
That's great info. Like you said flaring the metal line is the key to long term success. Don't get hosed! lol :-) Subscribed. -Glen
Ozzstar
Very cool & you’re spot on! We appreciate you reaching out to us! We really enjoy making these helpful videos for our fellow DIY’ers! 😀
Thanks for subscribing & don’t forget to turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! We subbed back! Keep up the awesome work. Your channel is awesome!
😎👍🔧🔩
Definitely will be doing this rusted fuel rail hose right under my drivers seat I honestly believe I had it for a long time and it finally showed itself in the winter
Thanks for watching & welcome to the DIY Raptor Club. It’s a great option to have & a very friendly DIY project. Keep us posted.
Enjoy your day. 😎👍🔧🔩
How did it go i bet you still had a leak going on if you just replacw a portion of the line
You need pressure clamps...those you have may not hold pressure
Thanks for watching & sharing your thoughts & advice. Any & all helpful info is much appreciated.
Hope all is well with you and your family.
😎👍🔧🔩
Should be recommending "high pressure fuel line clamps" they are different in their clamping.
Thanks for watching, any & all helpful info is greatly appreciated. 😎👍
Thanks I was just fixing to order a fuel line set I’ll wait and try this first
Thanks for watching & welcome to the DIY Raptor Club. Keep us posted on how it works for you. Thanks again Chris.
Enjoy your day. 😎👍🔧🔩
What is diameter of hose used?
Those types of clamps don't work around braided nylon hose from the fuel filter to either end of the gas line going to the engine or to the tank i get it so tight then those cheap clamps pop then i say its stripped then take the clamp off and try another and it pops because they're cheap clamps not made to hold gas lines on they'll work on a riding mower and other stuff but don't on nylon hoses
ive done this works great i also did it on my old crown vics transmission line as it had started leaking it worked great on that to i worked the hose pretty far on both sides of metal tubing and double clamped never had a leak or problem with it after that always the plastic clamped areas that leak.
Jesse Krucek
Awesome Awesome & thanks for sharing Jesse. We appreciate you watching & we hope you enjoyed the video.
Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
What i learned is shove the gas line on farther and use 3 or 4 good hose clamps my gas filter nipples are 3/8 then the steel gas line is i believe between 5/16 it says its 5/16 on the truck parts but its not on the truck i matched up the 5/16 hose i have the hose looks a tiny bit bigger than the line so I'll figure something out
So put your new rubber Briggs gas line on the existing gas line about 3 inches over the line and clamp put you some lubrication on the metal line first so it'll slip on good then you can clamp it up
But i read and seen that the fuel injection hose clamps work good on braided fuel line im about to see if it really does or was those reviews i read lying about the those clamps i have to do ours this way i don't own every tool to make it the right way a crimper
Thanx for the video bud. BUT I would suggest not do this on a pick up truck, the pressure is much greater than on a smaller vehicle like a toyota it may work for a short time, but is causing a potentially dangerous situation in the near future.
Thanks for checking out the video and sharing your comment! This is a great alternative & It’s important to refer to your owners manual/specs to obtain your specific fuel line pressure limits.
It’s also a good idea to contact your local dealership to verify psi limits!
Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩
Very helpful video, thanks man!! So my 02 blazer ZR2 started spraying fuel behind the driver side tire, when the vehicle isn’t running it doesn’t leak luckily but once I start it the pressure allows it to start spraying, I can actually see the metal line dripping/spraying, gonna give this a shot, wish me luck lol. Ps, thanks again 👍
Thanks for watching & welcome to the DIY Raptor Club. Awesome idea making it a DIY project. We are standing ready to help answer questions as you work through project.
Keep us posted. 👍
@@DIYwithMichaelBorders thanks so much, and I’m all about DIY, it’s a nice little feeling of accomplishment and I will absolutely keep ya posted 😊
@@jamiel3504
It is indeed & we love that!! Chat with you soon.
@@DIYwithMichaelBorders i found some 350 psi Russell blue braided hose at auto zone that says it is specifically for fuel, anti freeze etc plumbing, so I’ll be visiting auto zone today to grab a piece and some clamps, ready to get this done lol.
@@jamiel3504
Thanks for the update, looking forward to hearing back from you. 😎👍
I’m so excited to change mine..my vans tanks and metal lines are rusty..Got tanks so now we’ll work on the lines 😁😁
Thanks for watching & welcome to the DIY Raptor Club. These rubber lines are a great replacement option for many people.
Keep us posted on your project. 😎👍
It's worth noting that this rubber fuel line is used in aviation. My only comment is that there are specific fuel hose clamps. Those in the video will suffice but for a few bucks more.....
Pete Smith
Thanks for watching & we hope the video helped. We appreciate you sharing your thoughts Pete, that’s awesome! 😀
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
ACE hardware is the best place in my area to buy fuel hose. Ace New Albany Indiana.
How did you cut the line safely? wire snips would crimp the end. A saw would create sparks. Did you have to depressurize the fuel line first too?
Brian Rizzi
Thanks for watching Brian, great question! We used our awesome Pex-Pipe cutting tool to cut this!
It makes a perfect clean cut. We definitely recommend purchasing this tool.
Below is a link to a video we made reviewing & showing our Pex-Pipe cutting tool in use....definitely check it out!
ua-cam.com/video/NhbeLUfsVE8/v-deo.html
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
They have a pipe cutter a small tool that you attach to the metal line and it cuts it and leave a perfect circle
Melvin Riddick
Very cool & thanks for sharing your comment. We appreciate it. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
you use a small tubing cutter.
Lloyd Dailey
Thanks for watching Lloyd. We used a PEX pipe cutting tool. It works perfectly & is extremely sharp & gives a perfect cut. There are many more ways to conveniently cut this type of hose.
Thanks again for watching!
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
You just talked but didn’t show how to do it. What do you use as a coupling to jointly 2 gas lines together?
Thanks for watching, you can use fuel specific clamps. We will put a few options below. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/44R6d60
amzn.to/3P3DqFg
amzn.to/487Mulm
😎👍
I really hope you still reply.
I’m having issues with a Buick constant fuel line. The ones one the engine.
Thing is that the front hose it’s made of aluminum and rubber and I just can’t connect the new connector in. I try heating it and it bubble the outside of the hose. Try boiling it and nothing .
I can just cut the whole line but idk if it will make a difference since the old hose it’s made out of aluminum and rubber on the outside .
Or i can buy the repair kit but I would still be trying to get the hose to connect .
Any advice ?
Oscar
Thanks for watching & sharing your experience Oscar. Great question & let’s get this figured out!
These rubber hoses are great & extremely convenient & friendly on the bank account. It’s very possible that you will need the next size up hose.
We recommend visiting your local AutoZone & purchasing the hose. It’s very important that you purchase actual fuel pressure rated hoses with the braded design as shown in this video to ensure proper reliability.
AutoZone will have a few different sizes & you may find it easier to purchase a few different size hoses & use what fits & return what doesn’t.
Let’s start there, keep us posted!
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again Oscar!
😎👍🔧🔩
My Tacoma puch-lock got discinnected on it's own?? I puch it bacl into the line and I wonder if I could just cut the puch-lock part and do the same, clamp it up.
Thanks for watching & a few of our viewers have mentioned that’s what they did.
We hope the video helped. 😎👍🔧🔩
Hey man if you're still responding to comment I've got a question.
What size hose do you use?
We sure are and thanks for watching. Sizes range from 1/8” - 5/8” with 1/4” being the most common.
Best thing to do is cut away the bad portion of your brake line and take it with you to your local AutoZone where they can match it to the size best suitable for your system.
Keep us posted on your DIY project.
If only you could do this with brake lines too.
Thanks for watching, we definitely hear you. 😁
Below are a few helpful videos on brake line options.
ua-cam.com/video/4F4Lu-XaGwM/v-deo.htmlsi=dgnkJilsoDaMH3n_
ua-cam.com/video/2mDp5pEsuK4/v-deo.htmlsi=_-Vz-GM1y5SiZ-f3
ua-cam.com/video/Zj3HfNOZsxI/v-deo.htmlsi=MsSqNnnV44RYxF22
👍🧰
Would a single flare work, the double flare tool is twice as much as the single flare tool. Do you think the single flare will do the job?
Ross Munn Thanks for checking out the video Ross. That’s a great question and asked a lot. As you know, the fuel system is a pressurized system during operation...it is always recommended & safer to Double Flare the tips. This is because it creates that additional “lip” for a more secure connection. It’s very possible that AutoZone will rent you the Double Flare kit for free. Keep me posted on your repair. Please subscribe to the channel and turn on your UA-cam notifications that would be awesome thanks again Ross 😎👍
Below is a link to a video that talks a little bit about Double Flare...
ua-cam.com/video/2mDp5pEsuK4/v-deo.html
Thanks, good information. I like the idea of the rubbere hose, an easier fix and less money. I'll check out what you suggested. Thanks for the reply and your video. Regards, Ross
Thanks, good information. I like the idea of the rubbere hose, an easier fix and less money. I'll check out what you suggested. Thanks for the reply and your video. Regards, Ross
Ross Munn Very cool. Keep me posted on your repair. Let me know if you have any questions along the way. 😎👍
Thanks homie I did it an it it works like a charm thanks you God bless
master Beast
Awesome Awesome & you are very welcome! Thanks for watching! Keep us posted with any questions you may have.
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
How did u know which rubber hose to choose and what size? Pls help. Thanks
Good little video dude!
What’s up Ryan, thanks for sharing this. Many more helpful videos to come.
😎👍
Hey man what should I do if most of my pipe line is rusty. I don't think I see a non rusty part can I just do it over a rusty pipe as well? Or has to be clean? Asking because it seems I can't find replacement for my car.
well im gonna see if I can give this a try and hopefully it works. Just the cheap fix I was hoping was possible.
Dave Nonyabiz
Awesome & we find this to be a great option. Keep us posted.
Please subscribe to the channel and ring your UA-cam bell 🔔 this Will be very helpful to us thanks again.
😎👍🔧🔩
did this yesterday, worked great for me so far. $14 fix versus im sure over $500 at a mechanics shop. I flared the tubing ends a bit for an added pressure point and used double clamps at each end.
Dave Nonyabiz
Awesome Awesome & that’s great to hear. Our rubber hose is still going strong. An incredible option to have.
Thanks for reaching back out to us Dave. 😎👍🔧🔩
You need to use presure clamp, NO regular
Thanks for watching & sharing your thoughts, hope all is well.
😎👍🔧🔩
One would think the A$$holes at the OEM could design and build cars with rubber fuel lines instead of metal fuel lines that will last the life of the car. But then how are they going to steal the consumer's hard earned money if they do that? and how are the dealerships and auto repair shops going to stay in business? Thanks for sharing great ideas and not get ripped off.
maxim jones
Thanks for watching & we appreciate you sharing your thoughts. Makes you wonder...🤔
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
so if I do this gas won't leak?
So sorry for the delay. I used this hose and clamps on a 1995 Toyota Celica just shy of 4 years ago and NO LEAKS at all. I am very pleased with the easy and inexpensive alternative repair. Please Subscribe to the channel that would be awesome thankless again!
What size hose did you use?
it is not fine to install rubber hose with non flare metal fuel line pipe, don't mislead people, it is a matter of safety do the job well or let a mechanic do it for you, if the fuel line leaks and shoot toward the muffler, it may cause fire burn and may cause the whole car to get burned to the ground, you have to flare the metal pipe, no way around, before installing the rubber hose and then secure with clamps, behind the flare that will prevent rubber hose from slipping by pressure, if you don't flare the pipe, you will risk that the rubber hose will get slipped out by pressure, anytime.
Make sure y'all are using high pressure hose clamps. They are less likely to fail, about the same cost too.
Hunter Hying
Thanks for watching & sharing your comment. You Rock! Please subscribe to the channel and ring your UA-cam bell 🔔 this will be very helpful to us thanks again!
😎👍🔧🔩
Where do i get this kind of hose? And how do i know the amount of pressure it can take
Matthew R
Thanks for watching & we purchased this hose at our local AutoZone. It comes in a roll & can be cut to fit your desired length.
This hose is a great replacement for rusty leaking fuel lines. Let us know if you have any additional questions.
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
DIY With Michael Borders well, whats the easiest way to cut a fuel line? I have an 09 cobalt ls coupe. The rotted fuel line is located near the back of the car, by exhaust on a plastic clipping
Matthew R
Thanks for reaching back out to us. Great question! You can purchase an awesome Fuel Line Cutting tool at AutoZone for a friendly price.
We definitely recommend it! 😎👍🔧🔩
Ima do this to my Jeep xj
I hope it works well. Thanks dude.
Thanks for watching & welcome to the DIY Raptor Club. Let us know how it goes.
Enjoy your day! 😎👍🔧🔩
Im about to do this for my truck as well. Did you have any problems later with your Celica?
Hey there thanks for viewing and commenting....The hose works perfectly....Subscribe to the channel if you're up to it. Thanks again!
You need to buy fuel injector clamps
Thanks for checking out the video! I Definitely agree! Subscribe to the channel if you're up to it, that would be awesome!
Can I connect this to the carburetor to the fuel pump on a chevy caprice 1975
MrBrocephus
Thanks for watching & great question. We haven’t used this style hose for connecting to carburetor. We recommend using this style hose more downstream of fuel lines.
Let us know if you try it & how it works.
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Can these rubber hose heat resistant mine are near the muffler Chevy cobalt
@@ericdeicaza8438
Thanks for watching. We would recommend routing the new hose in a position where it doesn’t make direct contact with the exhaust and muffler system.
Those fuel pumps can dead head at 80 PSI. The running pressure is not relevant,
ManCave .Productions Thanks for checking out the video. Please Subscribe to the channel that would be awesome 😀👍
My gas line got cut to substitute it I put a Piece of water hose and put a gallon for gas in it and still won't start should i put more gas or something else
assbitchfuck6927
Thanks for watching. What’s your update? How did your line get cut? Let us know if you have any questions. Us fellow DIY’ers need to stick together!
Many more helpful videos to come! 😀
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
It got cut by my crappy neighbor got the gas out of my tank
assbitchfuck6927
😲...yikes, that doesn’t sound cool.
85 Toyota4. Wheel drive do take on gas tank to get to the break line under the truck close to the rear where they line goes over the gas tank I'm handicapped and on disability and trying to do this myself could you please help me and where is the RBS module under the truck so I will know where to start bleeding my line if I get that far thank you and Happy Father's Day
Finley Perkins
Thanks for watching Finley. This specific rubber hose is for fuel line replacement. It’s designed to withhold the ethanal in today’s fuel. We do not recommend using this style hose for your project!
Hope this helps! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩
I have a leak. Any issues over the years???
Thanks for watching & welcome to the DIY Raptor Club. No issues at all, we definitely recommend. Hope all is well.
😎👍🔧🔩
I'm thinking about doing the same thing I guess my question is I just have to buy new couplers and plastic connectors to connect the fuel pump all the way to the front of the engine? How many rubber hoses would I need to buy for a 1997 Pontiac Firebird?
Jeff Wardlow
Thanks for watching & great question. We recommend purchasing a brand new roll of hose. You can purchase rolls at your local AutoZone...you may find it best to purchase a roll of hose & then measure out what you need at home & cut the hose to your liking.
Also, at the front near the checkout computers at AutoZone are little hose clamps. We recommend purchasing the clamps that have the little tightening bolt on them. These clamps are very inexpensive & very reliable.
Keep us posted on your DIY project. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders thanks
Jeff Wardlow
😎👍🔧🔩
would you try flex steel or the JB steal weld goo if the leak was in a tough stop? Would it work?
jimmy Jam
Thanks for watching & we hope you enjoyed the video. We haven’t used those products on brake or fuel lines/connection points...🤔
The best people to ask is your local AutoZone employees. Keep us posted on your project as we are curious what you find out.
Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😀👍🔧🔩
@@DIYwithMichaelBorders I cut the line out where it was leaking. Discovered another leak while working on it and took that length out as well. The problem on these chevy's is they clamp the gasline in place with a plastic brackets which they probably do for safety and what happens is salt, sand, grit, build up and eventually wear a pin hole into the metal line. I used your rubber hose method and for what I use that truck for it works. Thank you for the video.
jimmy Jam
Thanks for the update, sounds like you’ve been busy. Great job! 😀👍
We also have found the replacement hose option to be very friendly & beneficial.
😎👍🔧🔩
Hey, What is a good way to cut the fuel lines? Its tight so I can't really get a hack saw under there, and I don't really want to bring out the angle grinder here...
Thanks for viewing and commenting. Great question and I have the the answer.....I use a Kobalt 1-1/4 Inch Hand cutter....( Part #: 0150944 ).....you can get this cutter @ your local Home Depot or Lowes. Subscribe to the channel if you're up to it thanks again!
They do make very small pipe cutters. You can find them at most hardware or plumbing supply stores
Angle grinder!!? BOOM!!
A small camping hatchet go nuts!
How do we know which rubber hose to choose and what size? Please help. Thanks
Jak Bayano
Thanks for watching & great question. You will want. to make sure that you purchase fuel rated rubber hoses. This will ensure that your rubber hose can withstand the pressure of your fuel system as well as the chemicals and additives inside your fuel. As far as size, you can use the portion of fuel hose that you removed from your vehicle to match the correct size of hose to buy. AutoZone can definitely be a great help.
Let us know if you have any questions. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders thank you for the quick reply. New subscriber here😀👍
Jak Bayano
You are very welcome. Thanks for subscribing, we subscribed back!
😎👍🔧🔩
What size hose is that? And is that just a typical fuel line hose you can get at an auto parts store? Thx
Thanks for watching & this is the standard USA 3/4 hose. This can be purchased at your local AutoZone. Great product. Keep us posted on your project, enjoy your day.
😎👍🔧🔩
Quick question do they sell those fuel line at ace hardware stores?
Use fuel injection clamps. They don't cut the hose.
LAKINGSSUCK
Thanks for checking out the video and sharing your comment. Great info & will help viewers. We hope the video helped. Please subscribe to the channel and turn on your UA-cam notification bell that would be awesome thanks again 😎👍🔧🔩
that's what I used !
Phenomenal Video bud! Subbed and liked. :).
DriftCannon Thanks for checking out the video and sharing your comment DriftCannon! So glad the video helped. This is definitely a good option when encountering fuel leaks and rusty lines. Never fun dealing with rusty fuel/Oil line leaks! Please subscribe to the channel and turn on your UA-cam notifications that would be awesome thanks again! 😎👍
Please don't use those garbage clamps and get the ones that are meant for pressure lines. The ones installed on my vehicle are leaking and, of course, they installed them to where the nut is hard to access to remove them *sigh*.
Thanks for watching & sharing your thoughts, hope all is well with you and your family.
😎👍
Toyota celica huh???? You related to Scotty 🤣
Thanks for watching & welcome to the DIY Raptor Club. Great car, really made us proud. 😁👍
Let us know if you have any questions, us fellow DIY’ers need to stick together.
😎👍🔧🔩
@@DIYwithMichaelBorders yeah definitely will be watching
@@hacatan24
😎👍🔧🔩
Do we use pipe cutter to cut the fuel line?
Thanks for watching & welcome to the DIY Raptor Club. Below is a link to our video showing the exact tool we use to make a clean cut on the new hose.
ua-cam.com/video/NhbeLUfsVE8/v-deo.html
😎👍
Omg thanks for this u have helped so much
If your fuel line is that rusted say by by to the brake lines
Thanks for watching, hope all is well.
😎👍🔧🔩
my truck sports about 70lbs of pressure so a no go for me!
Thanks for watching & we appreciate you sharing. Hope all is well.
😎👍🔧🔩
Hey I have 1999 Pontiac sunfire 2.4 and I need to replace the fuel lines but I cant find a video of the 2.4 just the 2.0
cody smyth
Thanks for watching. Glad to help. If you are replacing your old fuel lines with new lines, they are all very similar. This rubber hose option is a great way to fix a small rusted portion of hose.
If you’re replacing your line from inside the engine compartment all the way back to the rear brakes, you will want to use actual replacement lines as opposed to rubber hoses.
Keep us posted on your project!
😎👍🔧🔩
Now how can I buy bre bend line for my car
cody smyth
Thanks for the reply. Fuel pressure rated fuel line can be purchased at your local AutoZone.
😎👍🔧🔩
you made my day.ty.
You are very welcome, thanks for watching. Welcome to the DIY Raptor Club.
😎👍
What size replacement fuel line do I need
Thanks for watching, it may be best to visit your local AutoZone so they can match a replacement brake hose to your exact system. 😎👍
Thank you sensi
You are very welcome & we appreciate you sharing this. Hopefully many stress free days ahead for you.
😎👍🔧🔩
Thanks for the video. Some folks use gas tank additives like Gumout, Seafoam, etc. Any concerns that these products could compromise the replacement line material?
youeweu
Thanks for watching & depends on who you ask. Seems like each product has its pros & cons.
Our rubber fuel line is still working as designed & we have added fuel additives a few times over the years. Great product for a friendly price. Hope the video helped.
😎👍🔧🔩
I'm wondering why the car manufacturers bother nstalling expensive steel fuel lines instead of the cheaper rubber line like you describe...there must be a reason.
The steel lines last longer. The rubber lines provide a more economical friendly option for vehicles however can lead to dry rotting over years rather than rusting. The rubber hose MUST EPA certified due to the ethanol in gas. Ethanol can eat the hose if you buy a non-EPA approved line 😀👍
If you don’t use a rubber hose rated for carrying fuel, said fuel will turn the rubber into gel and gum up your whole system.
If you don’t use a rubber hose rated for carrying fuel, said fuel will turn the rubber into gel and gum up your whole fuel system.
Rubber hoses are more succeptible to impact and abrasion. You car won’t pass a safety with rubber fuel lines
Hi, can this fuel hose work for honda civic 2007 model?
Nick Sw
Thanks for watching Nick. We appreciate you reaching out to us. This hose is pretty universal & should work great on your 2007.
Keep us posted on your DIY project & any questions you run into.
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
How long do these rubber fuel hoses last? And are all of them rated for ethanol usage? Like doesn't matter where I get them should all be the same?
mrsemifixit Thanks for checking out the video. I have had fuel hoses on a vehicle for 5 years and I live where there are lots of temp changes as well sad lots of salt and snow. So it's a great product. You can purchase lines at AutoZone 😀👍
mrsemifixit subscribe to the channel if you're up to it thanks again
Michael Borders Thanks. Is it safe to replace about 4-5 feet of steel line with this? And if I flare the line I use clamps after the flare correct?
mrsemifixit Exactly...That's a great idea. 😀👍. You will love how user friendly this option is rather than the steel line.
Michael Borders Im conflicted though because I've read you shouldn't use anymore than 6 inches of the hose because gas breaks it down over time. Would 5 feet of it be safe?
I have a 92 toyota Camry I'm trying to but my steel hose to the fuel pump an replace it with rubber
Anita Frazier Thanks for checking out the video. This rubber hose can be used to substitute a portion of the fuel line. This can be used in your situation as long as you don't feed it into the tank itself. Subscribe to the channel that would be awesome thanks again 😀👍
this is where my fuel pump is the big bolt is stripped I need to cut it off
_lh3.googleusercontent.com/KDoUEVpUfGqLz8Iy6RB7zAbpKmT4XMVQbq0MTw8d3ZcEZUWbzwIQHwNywvvzypUR-ozgg4jp1xk_
once I do that then what
Anita Frazier hhhmm...the link isn't loading
DIY With Michael Borders it was a picture of my fuel pump
THANK YOU.
Kid FLASH
You are so welcome & we really appreciate you taking the time to reach out to us and share your comment! That’s awesome!
Let us know if you have any additional questions!
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Would this work on a trans cooler line?
Thanks for watching & you can purchase specific hose for trans cooler. It will be very similar to the hose shown in this video. AutoZone may be a good place to purchase it.
😎👍🔧🔩
@@DIYwithMichaelBorders and to hook the hose up im assuming i will need the quick connects?? Or what?
@@DIYwithMichaelBorders i have a 2000 chevy blazer and one of the cooler lines is leaking only when the car is running. So i believe its the lower line....
@@diaryofamadman8879
Those will work perfectly. 😎👍🔧🔩
@@diaryofamadman8879
😎👍🔧🔩
You aut to show
Anyone can read instructions
Thanks for watching, let us know if you have any questions.
Hope all is well with you and your family. 😎👍
What a dude .
Logan Stewart What’s up Logan. Thanks for checking out the video. Hope it helped! Please subscribe to the channel and turn on your UA-cam notifications that would be awesome thanks again Logan you Rock!
DIY With Michael Borders I'm probably gonna end up doing this with my truck. The line broke off near the fuel filter. What type of connectors do I use
Logan Stewart Very cool...I chose the connections clamps that have the 8mm bolt...as shown in video. I really like these clamps. This allowed me to tighten the clamps to my satisfaction. As you know, your fuel system is a pressurized system while engine is running...and because of that, I stayed away from the clamps that don’t have self-tightening capabilities. Keep me posted Logan 🔧🔨🔩😎
How do I use clamps to clip the rubber to the fuel filter it doesn't seem to have much of a lip
Logan Stewart I used a Flaring Kit that I purchased at AutoZone. I Double Flared the tip. Flaring is pretty simple...you’ll just need the kit...it’s possible that AutoZone will rent the kit..I’m not sure though. Below is a link to a video that shows us using the Kit.
ua-cam.com/video/2mDp5pEsuK4/v-deo.html
Buy good clamps not dollar store shirt if you don’t flare it use two clamps on each side
Jeff Leblanc
Very cool & you are spot on. We appreciate you sharing your thoughts.
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Well i have a motorcycle that had rust in tje gas tank in it so i cut the lines off because they wouldnt come off i needed them off put vinegar and dog chain in it let it sit for a couple days and shook it up so i need new lines now lol
Dats pretty sweet bruh
Thanks for watching & we hope the video helped. Definitely keep us posted on your project.
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
I have a 2009 chevy cobalt and i have been smelling gas near the driver side rear tire. Would the rubber hose work near the exhaust
Derek Pelle
Thanks for watching & sharing your experience! Let’s get this figured out together!
A few things come to mind & it’s very important that we get this figured out...driving a vehicle with a fuel leak raises concern 😲
First, we recommend doing an inspection for all fuel lines & verifying that you see no leaks. If no leaks, let’s move onto the next stage!
Below are a few links to videos that show several options it may be. Definitely check these out! Lets get your fuel smell / possible leak taken care of.
ua-cam.com/video/2cVUIvFWJ5s/v-deo.html
ua-cam.com/video/QZZdqQRKH6M/v-deo.html
ua-cam.com/video/khlkHZAoBp4/v-deo.html
ua-cam.com/video/gTlZrDhlTM4/v-deo.html
ua-cam.com/video/dq9XZe9Hx-M/v-deo.html
ua-cam.com/video/dIUagAd39_c/v-deo.html
ua-cam.com/video/tSV7L2MFuWo/v-deo.html
Let’s start there! Keep us posted!
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Derek Pelle I drive an HHR (basically the same as a cobolt) and I have a leak in the exact same spot on my car. Gonna try to repair with rubber hose tonight. Did you get yours fixed?
@@reederk091 no i have not everyone keeps telling me not to patch because the cobalt has about 80 psi line but i am going to try and fix it in the morning
Derek Pelle I will try to repair tonight and I’ll let you know.
reederk091
Thanks for watching & sharing your experience. This is definitely a great & friendly DIY project. We fixed ours & it’s worked great for a few years now.
Definitely keep us posted on your project!
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Would this work for a 02 Mitsubishi Montero sport
fat jack Gaming
Thanks for watching! This is definitely a great option for replacing fuel lines. We highly recommend referencing your owners manual & verifying the proper fuel system pressure.
After obtaining this info, you’ll be able to visit your local AutoZone & purchase the proper rated psi hose.
Keep us posted! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
YES
EarDrugzTV
Thanks for watching! Hope the video helped. We appreciate you taking the time to reach out to us and share your comment! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩
thx this helps alot
Xavier Huertas Thanks for checking out the video. Glad it helped. Please Subscribe to the channel that would be awesome thanks again 😀👍
done bro
Xavier Huertas Thanks...You Rock!
can I use this rubber hoes for my 1978 GMC truck for my mechanical fuel pump going up to my cab is it safe.
Clarissa Ashley Thanks for checking out the video. What are you currently using? You mention that the hose would go inside the cab correct?
+DIY With Michael Borders yes
Cool, this might be a good option to consider!
your fuel pump is under the hood bolted to the engine, not inside the cab ! yes you can use gas hose for your truck !
Thanks
VICTOR MANUEL
Very cool & you are very welcome! We are always here to answer questions.
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
I did this and it leaked really bad
DJ Allen Did you bevel the tip of the line?
Michael Borders ?
DJ Allen Its best to Flare your fuel line tip. I have a few videos if you visit my playlist "How to fix cars" and click on video that shows how to Bubble / Flare fuel lines. 😀👍
Did you mean your video on flaring brake lines? I can't find one of yours on fuel line flaring. Great video's by the way!
leadweight guy Thanks for the reply, I flared the end of the hard line that connected to the rubber hose. This gave the hose a flare lip to secure itself to as well as gave the clamp something to firmly rest against. HOWEVER....I inly did that once and just firmly secured clamps over hose and onto hard line and never ran into a leak. A friend of mine ran into a leak when he over tightened the clamp on the hose and the clamp ate through the hose causing leak. All and All I love this rubber hose option as it's extremely friendly when maneuvering in and out of small areas as well as having to bend, twist, and finagle those lines into position haha. Subscribe to the channel if you're up to it. Thanks again!😀👍.