2020 13 BMS Ant setup VBMS app
Вставка
- Опубліковано 2 жов 2024
- I try to explain the VBMS app and installation of the BMS board. These are my settings and not recommended for anyone else.
BMS no longer available but Ant still shows other models:
www.aliexpress...
Balancer
www.aliexpress...
Where can i download the ant bms app?
VBMS at the playstore from Vortecks or from the supplier of your bms for free
Where did you find the chart?
To be honest I can't remember but I think it came from one of the suppliers I bought one of my BMS from as it came with a user manual, Excel sheet called BMS parameter instruction RV4.6 (if you google the name it comes up)
좋은영상 잘 보고갑니다.하루하루 쑥쑥 발전되셔서 꼭 초대형채널이 되시기를 진심 응원드려요. I love so much this video.I like the video is the best. As develop day by day, Always follow your luck I sincerely hope that your channel will be very big.
guitar song.What do you think about this?Thank you for being friends with music.
I found you in my spam mail so it took a bit to answer Thank you for following my channel.
Time for figuring things out for sure. Looking good. Maybe if you would post a link to the BMS could give others a good place to buy there's. Now will that BMS be used for all three units of batteries. Or each one have it's own. I tried looking deeper in to the back ground to see if i could see and understand. Wow nope was not able to.
I will post a link to the BMS. Right now in testing mode I have all 3 batteries going through 2 BMS but I think I will change that as it allows voltage to creep into the backdoor of the BMS which it has no control over. Eventually when I add the rest of the batteries 1 bms will run 3 batteries in parallel so the 2 sets of 3 will only be coupled on the main bus bar.
Looking good that's alot of wires
Thanks and I got them in the right spot first time lol no smoke Whew!
Full play. You have amazing work. Amazing organization. Good job
Thank you my friend
I having problem to pair phone with the bms can u tell me what app using
I use VBMS for app but the pairing problem is likely in the phone you have to clear all other bluetooth pairs and then allow and the password 1234
I try to download vbms app they said not for my country
I will do like u say clear from the phone it again
NICE brother. WOw that is a KILLER setup!! I need to get more PV.. 3000 watts just is not much for off-grid..
Well thanks for watching Bobby I don't know how you can live with only 3000 watts even in SC just not enough. I picked up all my panels from people who were getting out of solar, used systems are the only way to go. Take care and stay healthy.
hello. where are you download app for bms? or what is name this app?
Google play store VBMS or ask the seller where you bought it.
Wow trying to follow along but not having anything like what u have this is over my head.
Looks complicated but it is just one step at a time you have a beautiful system
Noob question here! Is the main C- cable connected to your inverter, or the charge controller?
B (blue) goes to battery C (Common) is used for both charging and discharging on the 2 wire BMS on 3 wire bms the charge and discharge are separate wires. Hope this helps you understand
Thank you for the video. I might buy a few for my other installations
Well the guys I know with them all seem to think they are good
fyi the wiring diagram is provided on the aliexpress page dude
yes thanks
Sir, where is the factory system research PID. My Bluetooth was not detected
The problem is likely in the phone reboot and clear BT. thanks for the comment and watching
Id go on the site you got it from and check the connection pics
Yes I did figure it out and I did find the pictures for connection so I had a little more confidence when I turned on the power lol and no smoke.
@@offgridwanabe I think youve done a great job with your system
@@frankz1125 Thank you Frank Z I know your work is professional so it matters.
@@offgridwanabe Do you get the bms s from the same seller ?
@@frankz1125 No two different sellers boards are definitely different but not much. I may do another video showing how they get along now I have them working together.
What gauge wire is on that BMS? Did you have to install/solder it on or did it came installed already? Nice video.
I used the wire that came with it, since I only needed 12s I just soldered on the other 12 to extend the wires. All wires were ready to use just push in the connectors except the short button which I soldered on I just crimped the ends on for the battery ends. I think that wire is 22 gauge. I never used the temp sensors as I have too many locations to monitor. Thanks for watching and commenting
@@offgridwanabe Thanks. What about B- and P- wires?
@@DMIINC2013 They were already soldered on the board two number 8 fine wire I just added the cable ends with my hammer crimper and shrink wrap.
Another awesome video chers
Thanks for watching
Hi, I noticed this video only recently. I also bought a couple of ant bms. It took really long for them to arrive. Now, I got them but they disconnected the item and do not sell them anymore. I am stuck with them not knowing how to get them to work. Can you pleased tell me where to download the android app for these bms?
VBMS on Google Play
play.google.com/store/apps/details?id=com.vortecks.vbms&hl=en_CA
Only place I can find it is on Google play and it's a pay for app Sorry it won't let me email it as it shows as a virus
@@offgridwanabe OK, thanks a lot for the info.
Is this app just called BMS? I can't find it on the play store
VBMS
@@offgridwanabe The one for $8.99 on the play store?
@@eco_guardian Yes Vorteck is supposed to work but I never bought it. The supplier of the BMS should give you a free app.
Wow I have the same battery packs and the same style of bms, but I can't find the app, or at least I can't find one that works for iphone or mac.
Sorry can't help you there just an android guy lol
@@offgridwanabe Where are you located? I'm in Muskoka ontario - I was surprised to see exactly the same battery as me. I bought mine from a guy in Gravenhurst.
@@eco_guardian Yep Frank and I have been working on these batteries for a while now his system is awesome I just use mine for night time power. I'm on the Severn River
Just buy an old android phone off kijiji they are cheap and then use the app provided as you really need to adjust the settings and the only way is from the app.
@@offgridwanabe Yup good idea
What is apps
smart Phone program app short for application
Cool
Thanks