@Emily Wolf the UHF are 4 watts and the VHF are 5 watts. The cp200s only come in 4 or 16 channels. Now thiers is the cp150 which is 4 channel but only 2 watts
I have the same speaker microphone for my RMM2050 MURS units. It's a great mic. Buying aftermarket shaves off 30+ dollars from the price of the mic without sacrificing quality.
@2004grandmarquislove when the you press the bottom button once I believe this is not scan because if it only does it on one channel it's not . It's actually the quick call moniter it's waiting for the tones. Now when you press it four times it puts the radio into service mode. It has test channels and tones and a lot of other stuff including a ham channel..
When you said the company might be using a repeater, they might have been or they might not have been. If they were using a repeater, the transmit frequency of the repeater is what you were hearing. Repeaters work by receiving and transmitting on two different frequencies. Lastly when you listened with your scanner, you were hearing the transmit frequency of the radio which was 467.4125 MHz, but you weren't necessarily hitting a repeater. Usually if you were to hit a repeater you would know.
I'm not sure but if you need some for a short time I believe dealers can let you borrow then at no charge. They can be found on eBay for about 120 dollars each with a battery and a charger.
BTW, I believe that the sequence I suggested is a radio knob and button test, just so you can figure out if all the controls maintain proper contact. Mess with it and let me know what happens.
I currently own a single Motorola cp200, and I am also not sure what that function is either. I do know that it is a diagnostic mode of some kind, Here is some homework for you...turn your radio off, hold both programmable buttons down, while simultaneously powering on the radio, it is quite hard to do but can be done. the radio will make a loud noise that the volume knob cannot control, So if you are willing to perform this, make sure you are hovering over a couch or table in case u drop it.
That would be great if you could make a video on the cps software!!!!! Yeah i watched your update video and thats cool how you can personalize your radio how you want it, the side buttons, freqs, everything. Im new to these radios as i purchased them about 2-3 months ago and am still learning about them lol
How are they doing (cp200s)I'm getting 2 off them off what's left after Motorolas cancellation of them in 2014 and for my birthday and Christmas combined I will get a Kenwood nexedge or cp200d you should get the cp200d my school uses them there great anyway love your vids would love more cp200 vids or even better you recording radio chatter on ur radios anywy lv ur vids🙂
Be careful. You need a license to use these radios legally. Make sure you get a GMRS license and program some GMRS FREQUENCIES in using RSS, which of course is hard to get. If you are new to radios, I highly recommend the GXT5000. It is professional, business quality for beginners.
The radios are currently up to trade. I'm looking for two working motorola MTS2000s with batteries and at least one charger. These radios will come with one charger the CPS software and the programming cable with a speaker mic. If you or you know of someone who wants to trade let me know.
@2004grandmarquislove you will need cps to switch the options of the radio. This includes the freqs and everything else. Also how many of them do you have?
Is it possible for someone to monitor someone else on the radio like for example if I gave one walkie-talkie to someone else and I had the other one could I listen to what they're saying without them pushing buttons
what kind of batteries do you have? I have all nickel metal hydride in mine, they seem to hold a pretty good charge and last awhile, thinking about getting lithium ion tho
why not just tell them where it really is and practice your freedom of speech.If your not downloading it you don't need to worry.Nothing illegal to tell someone where the bank is and that they have they money.Pointing to a Sweet spot is not illegal. People expect better answers
I have a set of 2 of this radios. Channel 2 is set to communicate tomeach other. How do i programm channel 3 to programm them again and how do i program other channels like police or other puclic frequencies and m i able to communicate or just listen to them. And last question can i programm a standard regular walkie ta Kiw to work with this
I have the 4 channel uhf models and i have a question. On channel 1 only, when i press the bottom progammable button once, it beeps and the green light flashes, is that a scan mode or what? it only does it on channel 1. Also if i press the bottom button 4 times it double beeps and then beeps as i flip through the channels, and on channel 4 i can pick up something but i think its to far away, is this the scan mode? I really need help as i am new to these. thanks!!!
A license is required to operate these radios legally. When your licensed, your radios should be programmed to the license. Then you will have much better luck of using them and being separated from other users around you. You can also program in a dpl or pl for your frequency.
I have heard of states using a system of Sheriff's Offices in a few states as license holders for anyone with a radio like this if they have permission. If that isn't necessarily true in Ohio, how can you get a license for a UHF CP200?
I have not had to deal with licensing for many years. I have heard when you apply you can get 5 simplex freqs for one application so that is what I am doing. When I was way young I had a license for my CB radio. License number KCO6585, gosh I am old...hahaha
I did not answer your question. You have to apply through the FCC, Federal Communications commission. If you have a comercial radio shop some where they will help you get your license for a fee.
+Charles R Me and a few friends have applied for a Commercial Radio license. We have 5 assigned frequencies. All with full emissions. One of those freqs is assigned to a 100 watt fixed base repeater.
they are uhf 4 channel models. I paid about 800, this inlcuded, charges, belt clips, antennas, and a speaker mic, they are in fantastic shape!!!! Almost no sign of use, maybe a few small scrapes but thats it!!!
and by scan, i mean how can i pick up other businesses radio traffic (listening in) do i have to have a scan mode? or if im in range with another business will it just automatically pick it up?
so how do i scan frequencies? do i have to program to scan first or should it already do it? I bought mine on craigslist as well so all i know about them is that they are already in narrowband lol
ok so i know nothing about radios but i need some for tactical shooting and my team are running 2 way motorola talkabout radios.now i have msa sordins that i would like to use.are there any wats to connect msa sordins to motorla talkabouts or is there a radio i could use msa sordins & connect to motorola walkabouts.please help me out.thank you
LOL...NO Legally your can! Watch its easyDOWNLOAD TO CPS IS ON HAMFILES UK! FIND ON GOOGLE.... FIND HAMFILES UK ON GOOGLE... BUYING DOWNLOAD IS ILLEGAL TO.... THATS WHY HAM FILES IS NOT SELLING SOFTWARE......THEY ARE SELLING POINTS......POINT LET YOU DOWNLOAD..........SAYING THAT IS NOT ILLEGAL......FREEDOM OF SPEECH
Dude your so parraoid telling someone where the software is not illegalIs downloading a Copy of windows Xp illegal if so, Is all the people teaching people how to break rules and teach on youtube how to download free windows xp illegal? so why is this any different?
I have four of these that we use for my company, one had broken, I found an awesome deal on ebay for a replacement but I can't seem to link it to the existing ones, it is the same make and model, does anyone have any suggestions
Hi, can someone please help me. I just bought a brand new, well i think it's brand new Motorola CP 200 with 16 channels off Ebay. i was wondering why does mine, the only working channel is the first one, all the rest it's making an annoying non stop tone. is it because it's now frequencied? thanks guys
That's because the rest of the channels Making the Annoying endless tone is ( Un programmed ) Buy a Cheap Chinese Programming cable off Ebay and Download software from HamFiles on Google . Register and get software.Don't forget to download Prolific 203 and fix Com ports in My computer device Manager Com Settings( and ) Restart or wont work.....Program its easy!
@2004grandmarquislove that nearly the same as me I paid 100 for two radios 16chan uhf both have batteries antenna belt lip but I only got one charger. But for 100 that's a good price.
@2004grandmarquislove I have two 7.2 v OEM motorola lion batteries. One holds a full charge the other holds sometimes a full but usually half of a charge. For cps I had a friend help me acquire it you can message him if you want.
@2004grandmarquislove I just messages him for it. Also if you do get new batteries for your radios notify me because I would buy your good working used ones off you.
The CP200 is the standard for the Film/TV industry.
6:01 correct it is a test mode
Nice I liked ur vids of these. I saw it when it first came out and than bought my own on a 6 unit charger for my desk
@Emily Wolf the UHF are 4 watts and the VHF are 5 watts. The cp200s only come in 4 or 16 channels. Now thiers is the cp150 which is 4 channel but only 2 watts
I have the same speaker microphone for my RMM2050 MURS units. It's a great mic. Buying aftermarket shaves off 30+ dollars from the price of the mic without sacrificing quality.
@2004grandmarquislove when the you press the bottom button once I believe this is not scan because if it only does it on one channel it's not . It's actually the quick call moniter it's waiting for the tones. Now when you press it four times it puts the radio into service mode. It has test channels and tones and a lot of other stuff including a ham channel..
when you push the button 4 times after you turn on the radio its goes into what i believe is called service mod.
+TechiPhoneGames That is correct.
When you said the company might be using a repeater, they might have been or they might not have been. If they were using a repeater, the transmit frequency of the repeater is what you were hearing. Repeaters work by receiving and transmitting on two different frequencies. Lastly when you listened with your scanner, you were hearing the transmit frequency of the radio which was 467.4125 MHz, but you weren't necessarily hitting a repeater. Usually if you were to hit a repeater you would know.
I'm not sure but if you need some for a short time I believe dealers can let you borrow then at no charge. They can be found on eBay for about 120 dollars each with a battery and a charger.
How Much is Motorola Walkie-talkie Radio cost
About $559 for one
BTW, I believe that the sequence I suggested is a radio knob and button test, just so you can figure out if all the controls maintain proper contact. Mess with it and let me know what happens.
I currently own a single Motorola cp200, and I am also not sure what that function is either. I do know that it is a diagnostic mode of some kind, Here is some homework for you...turn your radio off, hold both programmable buttons down, while simultaneously powering on the radio, it is quite hard to do but can be done. the radio will make a loud noise that the volume knob cannot control, So if you are willing to perform this, make sure you are hovering over a couch or table in case u drop it.
That would be great if you could make a video on the cps software!!!!! Yeah i watched your update video and thats cool how you can personalize your radio how you want it, the side buttons, freqs, everything. Im new to these radios as i purchased them about 2-3 months ago and am still learning about them lol
@2004grandmarquislove you put thier frequency in with the pl or dpl tone and it should work fine.
What channels are you using. FRS, GMRS, or some other
How are they doing (cp200s)I'm getting 2 off them off what's left after Motorolas cancellation of them in 2014 and for my birthday and Christmas combined I will get a Kenwood nexedge or cp200d you should get the cp200d my school uses them there great anyway love your vids would love more cp200 vids or even better you recording radio chatter on ur radios anywy lv ur vids🙂
Be careful. You need a license to use these radios legally. Make sure you get a GMRS license and program some GMRS FREQUENCIES in using RSS, which of course is hard to get. If you are new to radios, I highly recommend the GXT5000. It is professional, business quality for beginners.
The CP200s have been long gone :)
TheEchoAlpha you sold them?
that would be great, because i would like to get these radios programmed to how i want, including the 2 side button options, as well as the freqs.
@2004grandmarquislove no problem. I'm planning on making a video on the CPS also if you look at my update video it has some of the cps in it.
absolutely, these radios are fantastic in durablity, range, just everything, i love them, there great. Where do i get the cps for them?
The radios are currently up to trade. I'm looking for two working motorola MTS2000s with batteries and at least one charger. These radios will come with one charger the CPS software and the programming cable with a speaker mic. If you or you know of someone who wants to trade let me know.
@2004grandmarquislove you will need cps to switch the options of the radio. This includes the freqs and everything else. Also how many of them do you have?
Update I recently got cps for these radios!
@TheEchoAlpha wow that's a lot may I ask how much did you pay and are they uhf or vhf?
got any new videos coming soon?
Is it possible for someone to monitor someone else on the radio like for example if I gave one walkie-talkie to someone else and I had the other one could I listen to what they're saying without them pushing buttons
That is test mode to make sure your ptt works and other things
what kind of batteries do you have? I have all nickel metal hydride in mine, they seem to hold a pretty good charge and last awhile, thinking about getting lithium ion tho
@Trey Ryan thanks for the info. But what is HSS and CPM
You can find it on those special sites or buy it legally from Motorola.
why not just tell them where it really is and practice your freedom of speech.If your not downloading it you don't need to worry.Nothing illegal to tell someone where the bank is and that they have they money.Pointing to a Sweet spot is not illegal. People expect better answers
Hi i Have the old Maxon walk talkie its old one works and the other does not work Should i Take it Apart it Takes batties but it wont come on idk why!
will do, thanks man!
I have a set of 2 of this radios. Channel 2 is set to communicate tomeach other. How do i programm channel 3 to programm them again and how do i program other channels like police or other puclic frequencies and m i able to communicate or just listen to them. And last question can i programm a standard regular walkie ta
Kiw to work with this
@jeff Neely nvm I already got my gmrs and ham license and I also got thr software. Thanks
@2004grandmarquislove do you happen to have the cps for them?
I have the 4 channel uhf models and i have a question. On channel 1 only, when i press the bottom progammable button once, it beeps and the green light flashes, is that a scan mode or what? it only does it on channel 1. Also if i press the bottom button 4 times it double beeps and then beeps as i flip through the channels, and on channel 4 i can pick up something but i think its to far away, is this the scan mode? I really need help as i am new to these. thanks!!!
will you sell them and if yes how much would you sell them both with a charger for
@2004grandmarquislove yes you can do that I listen to my police department all the time. You just set it for receive only.
Willing to program and sell ?
is there a way to scan and tune into somebody elses frequency for receive only?
A license is required to operate these radios legally. When your licensed, your radios should be programmed to the license. Then you will have much better luck of using them and being separated from other users around you. You can also program in a dpl or pl for your frequency.
I have heard of states using a system of Sheriff's Offices in a few states as license holders for anyone with a radio like this if they have permission. If that isn't necessarily true in Ohio, how can you get a license for a UHF CP200?
I have not had to deal with licensing for many years. I have heard when you apply you can get 5 simplex freqs for one application so that is what I am doing. When I was way young I had a license for my CB radio. License number KCO6585, gosh I am old...hahaha
I did not answer your question. You have to apply through the FCC, Federal Communications commission. If you have a comercial radio shop some where they will help you get your license for a fee.
+Charles R Me and a few friends have applied for a Commercial Radio license. We have 5 assigned frequencies. All with full emissions. One of those freqs is assigned to a 100 watt fixed base repeater.
cool!
they are uhf 4 channel models. I paid about 800, this inlcuded, charges, belt clips, antennas, and a speaker mic, they are in fantastic shape!!!! Almost no sign of use, maybe a few small scrapes but thats it!!!
Where did you get the cps for the radios?
and by scan, i mean how can i pick up other businesses radio traffic (listening in) do i have to have a scan mode? or if im in range with another business will it just automatically pick it up?
Where can I go to get some donated? I need 6 CP200 VHF radios.
so how do i scan frequencies? do i have to program to scan first or should it already do it? I bought mine on craigslist as well so all i know about them is that they are already in narrowband lol
Where can I get the CPS? I have CP150 I want to program.
hamfiles uk
ok so i know nothing about radios but i need some for tactical shooting and my team are running 2 way motorola talkabout radios.now i have msa sordins that i would like to use.are there any wats to connect msa sordins to motorla talkabouts or is there a radio i could use msa sordins & connect to motorola walkabouts.please help me out.thank you
@حسين العبادي هل تتكلم الإنجليزية؟
how many volt and mah does the charger produce ?
Lol. Legally I can't give to people. I only can steer you in the right direction.
LOL...NO Legally your can! Watch its easyDOWNLOAD TO CPS IS ON HAMFILES UK! FIND ON GOOGLE.... FIND HAMFILES UK ON GOOGLE... BUYING DOWNLOAD IS ILLEGAL TO.... THATS WHY HAM FILES IS NOT SELLING SOFTWARE......THEY ARE SELLING POINTS......POINT LET YOU DOWNLOAD..........SAYING THAT IS NOT ILLEGAL......FREEDOM OF SPEECH
Dude your so parraoid telling someone where the software is not illegalIs downloading a Copy of windows Xp illegal if so, Is all the people teaching people how to break rules and teach on youtube how to download free windows xp illegal? so why is this any different?
+joe gibbens I have 2
motorola .cp200 radius for sale 150.00
Where can i buy these?? The exact walkie talkies??
Ebay
I just made a quick video of the CPS enjoy!
OMG, I saw them on craiglist too. damb i called the guy and he said he sold them to you. I can trade 2 vhf XV2100's and 2 UHF CP100's for those two
I have four of these that we use for my company, one had broken, I found an awesome deal on ebay for a replacement but I can't seem to link it to the existing ones, it is the same make and model, does anyone have any suggestions
+Karma Reign Use CPS RVN4191 to reprogram it. Your frequencies are different in it.
I Believe you are correct
Hi, can someone please help me.
I just bought a brand new, well i think it's brand new Motorola CP 200 with 16 channels off Ebay.
i was wondering why does mine, the only working channel is the first one, all the rest it's making an annoying non stop tone.
is it because it's now frequencied?
thanks guys
Bo Cheng Ke This is because only the first channel is programmed. You would need to get the cps to program it or have it programmed.
That's because the rest of the channels Making the Annoying endless tone is ( Un programmed ) Buy a Cheap Chinese Programming cable off Ebay and Download software from HamFiles on Google . Register and get software.Don't forget to download Prolific 203 and fix Com ports in My computer device Manager Com Settings( and ) Restart or wont work.....Program its easy!
Agreed! The cheap chinese cables might be a risk because they aren't as reliable but I haven't had a problem with mine! Joe explained it very well!
Can a reverse burst be programmed in?
Yes TPL and DPL
TheEchoAlpha I just paid 90.00 dollars for my GMRS license just now. I never received a call sign.
Any ideas when i would get a call sign?
yes ( NON STANDARD ) is EnabledStandard is Disabled.... Sounds backwards but yea....
Thank you Joe! Appreciate your comment.
do u no how to program?
it's NOT frequencied*
Salut Je veux Acheter Cet Motorola cp200 Tu peux M'aider Ou Je trouve un vendeur De Cet 2 Radios ?
@2004grandmarquislove that nearly the same as me I paid 100 for two radios 16chan uhf both have batteries antenna belt lip but I only got one charger. But for 100 that's a good price.
what is that uniden called
+omid aval BCT 15
@2004grandmarquislove I have two 7.2 v OEM motorola lion batteries. One holds a full charge the other holds sometimes a full but usually half of a charge. For cps I had a friend help me acquire it you can message him if you want.
XD i just learned how to turn it on thanks
how much would u sell them to me for
the 4 presses might be vhf have no clue
its test mode
@2004grandmarquislove I just messages him for it. Also if you do get new batteries for your radios notify me because I would buy your good working used ones off you.
no I dont have the cps for them :/
I just bought the xls for work
My radios
nice
Same as mr Darrel
can you give me one i'm in ohio if you cp200 motorala walkie talkie
give away
Ive got 5 of them
I have an update on this video check it out on my channel.
I pirate empty business frequencies. Get mad aspies! :p
Yo