UniFi nanoHD Access Point • Unboxing, installation, configuration and test
Вставка
- Опубліковано 25 жов 2019
- Ubiquiti UniFi nanoHD Wi-Fi Access Point | Unboxing, installation, configuration and test. How to connect it to any modem / router.
You can find it on Amazon: amzn.to/32Obps7
www.trafegon.com - Наука та технологія
How to install UniFi controller: ua-cam.com/video/eDweItb2GtU/v-deo.html
You can find it on Amazon: amzn.to/2BPUMA5
I have a question.
I see you are connecting the gray LAN cable from the POE power supply to your modem.
As it is with you, it is with me too!
But now my question is, do I also need to connect my laptop with a lan cable to my modem/router?
Or can I also save settings in the UniFi via WiFi?
Thank you! Great presentation, music and easy to follow!
Thanks to you for watching! ;-)
Hi, any suggestions as to how I can get the AP on the same SSID as my router so It’s a seamless transition between AP’s? Been trying to find decent instructions and this is best and closest video I’ve found so far..
I just installed our unifi nano hd in our school. Perfect result!!! Thank you so much!!!
Thanks to you for watching 😉 Glad to be helpful 😊
Hello. I can configure the ubiquity by laptop or by smartphone by scanning the QR code and using their app, correct?
This is the most telling video
Thank you
Thanks to you for watching!
@@trafegon Thanks for sharing your work.
The video is very helpful even so there are too many unanswered questions that the manufacturer doesn't deal with.
bravo 🎉🎉🎉easy demonstrated
Thank you. Great video.
Thanks to you for watching! ;-)
You are so helpful brother
Thank you! Glad to have been helpful!
I have a Motorola mg7540 that I’m planning to hook up a unity wireless access point via Poe. I read the mg7540s Ethernet port does not have poe. Can I still set this unify nano jd using poe?
thank you so much for information
Thanks to you for watching!
Thank you so much ❤.
Thanks to you for watching! ;-)
What if I use 3-4 Access Points, will it automatically combine SSID's or would I need to login credentials for each new Access Point.
Great video. Looks easy enough. Ok and If I want to put the access point far it doesn’t have to be wired to the router correct? Only 1st time for the initial setup let’s say and then you just need a plug to power it up and it connects still to the WiFi router of your house?
No, this is not a wireless repeater, it is a wired access point.
@@Joshiyotis Thanks for the easy explanation.
This basic information is missing from the manufacturer which calls its products with difficult names and never tells what they are and what they do.
Esse roteador é mesh ou ele tem que ser ligado via cabo rj45?
You don’t need a router you can plug this directly into your modem and create a wireless network, correct?
Hi. Is it possible to have poe directly from the switch and therefore avoid installing the power supplier? Thanks!
yes, buy a POE switch
Is the lan cable only required for setup can this then after connect wireless to my router?
it's required for operation. How are you going to power it otherwise? Unifi has also a wifi extender doesn't need ethernet and can just be plugged into the wall.
Does it need to be plugged in router, or is it possible to plug it into internet plug in the wall?
A plug in the wall is connected to the router. I have one of these plugged into my wall outlet and sitting on top of a cabinet.
16 mbs download speed.
How fast is your wired connection to the same network?
All good just viewing the video not clear at the address bar..when we need to login for configuration
One qeustion if you install the controller on the pc do you need to have the pc always on or only once
Only once to configure it. If you run the 'captive portal' then you need to leave it running (its the guest wifi with log in page like hotels use) . Also they have a mobile app so you can open the mobile app configure and close.
Perché non provi qualche apparato mikrotik?
i Ned POE Power supply to unifi cable color code Please tanks
What should I do if I forget my password?
me puedes parar el modelo de router que usas
Unifi kong
I Don't understand cannot make.
Instructional videos are useless without verbal instruction/comment
16megabit download. needs ubiquiti gear. hurrrrrrrrrrrrrrrrrrrrrr
Mtsus
thank you so much for information
Thanks to you for watching!