Draped American Flag. How I made mine!
Вставка
- Опубліковано 20 лип 2024
- This video shows the process I used to make a draped American Flag. This is not my original design. I got the inspiration from Hanley’s Homestead Channel. He did a great job laying out the measurements. I created a drawing from his measurements which you’ll see me refer to. This is my version. There are time stamps listed below for specific parts of the process.
#drapedflag #drapedamericanflag #hangingflag #oldglory #woodenflag #diy #madeathome #handcarved #carvedflag #flythecolors
A drawing with all measurements is available on my website:
www.https//oldeshedworkshop.com for $5.50. Click on "Shop".
Please visit my website @ www.oldeshedworkshop.com
Video Chapters
00:00 - Intro
00:47 - Layout
02:03 - Finding The Center
09:16 - Folds
09:40 - Where To Cut
09:57 - Where To Cut
10:48 - Darker Lines and Measurements
15:28 - Identifying The Three Folds
16:39 - Cutting The Flag To Shape
17:58 - Grinding
21:18 - What stain do I use?
22:00 - Laying out the stripes
24:20 - Laying out the union
31:00 - Laying out the stars
31:45 - Orientation of the stars
“As an Amazon Associate I earn from qualifying purchases.”
Links:
DeWalt 4 1/2” grinder: amzn.to/49hgrz3
40 Grit Flap Disk: amzn.to/3OOW98m
120 Grit Flap Disk: amzn.to/3I1W651
DeWalt Oscillating Multi Tool: amzn.to/3wdNLIU
Oscillating Multi Tool Kit 3 1/8”: amzn.to/3T28s3w
Oscillating Multi Tool Kit Finger Pads: amzn.to/3UKQ3ts
Frog Tape 1.88”: amzn.to/3vZD8ta
Thorvald Carpenter’s Pencil: amzn.to/49hfir5
DeWalt 9’ Tape Measure: amzn.to/3wEjlj7
18: Stainless Steel Ruler: amzn.to/47YrZGn
6” Machinist’s Scale: amzn.to/42q2igw
Dremel 300: No longer available
Dremel 3000: amzn.to/3SIxN1b
Dremel Flexible Shaft: amzn.to/48nk6uf
Dremel #106 Cutting Bit: amzn.to/3HJdYlc
Dremel Fan: amzn.to/3OONqmx
American Flag Star Stencil: amzn.to/3w67RVm
6” Propane Hose With Gauge: amzn.to/3UjCAbN
Bernzomatic TS4000 Torch: amzn.to/47ZuKHe
Disclaimer: All of my materials/media are for entertainment purposes only. These are not meant to be construed as instructions on how to safely operate power tools or other machinery. Power tools are inherently dangerous and should be used only after familiarizing oneself with the directions and safety precautions that came with the tool/machine. No statement of fitness for use or safety of operation is stated or implied. By using these plans you personally assume all responsibility for any and all outcomes. - Фільми й анімація
It's beautiful, great craftsmanship!! I retire at the end of this month, so I'll add this to my list of things to do to fill my time and keep me busy. Can't become a couch potato!!!
Thanks very much.....get going!!
What an excellent explanation. Clear and detailed.
Beautiful results.
Thank you very much!
I've watched my share of videos on the process of draped flags and yours is by far the best, very detailed. Thanks so much.
Glad you liked it. Thanks for the compliment!
Very nice craftsmanship and amazing detail... Old Glory is looking beautiful!
Thanks for the video.
Thank you very much!
Excellent explanation and finished project
Thank you very much. Are you going to try making your hand?
@@oldeshed For sure it is on my todo list. Currently, I have several projects that are higher priority. This always seems to be the case for me. Thanks again for the great video!
I have watched two or three other people on this UA-cam channel making this and you are the one and only one that explains in detail every single step you don’t miss a beat you’re very detail oriented. It’s the best video in my opinion on this wooden flag.! I find most people on a UA-cam channel lie about a lot of things and hide a lot of things just to get views. I find that honest and you have integrity and I appreciate that. Thank you for your videos.! you do amazing work!
Thank you so much. I try to explain the process of what I'm doing. You made my day.
@@oldeshed well you deserve high kudos! because most people on here are full of crap in my opinion and you are honest and to the point and in detail keep up the good work I’m proud of you
Nice job and great explanation on the layout. I also watch Haney videos and between the two of you I think I got it. Thank you
That's great. Thanks for watching. Send me a picture when you finish your first flag.
Excellent video, best explanation yet on how to make one
Thank you very much.
i tape stain and pull the tape off had good luck with that cheers1
So the 2.5” mark is 39”from the top of the board ?
It's important to clarify that the 2.5" doesn't come in from just anywhere at the top of the board. More specifically, the measurement from the 4" mark comes down 39" to the edge of the board. From that point at the edge of the workpiece, come in 2.5". The next line comes from the 5" mark to the 2.5" mark. Hope that helps.
@@oldeshed it did. Thanks.