How to make Sounding audiophile highend RCA interconnect cable for 20 $ !!!
Вставка
- Опубліковано 31 лип 2015
- RCA connector tasker series gold
Cable Microphone OFC Low capacitive
semi balanced
Audio track
ARTIST: Hip Hop Royalty Free Music
TRACK: Life Of a Rapper
www.deezer.com/it/album/13768416
TRATTO DA www.tnt-audio.com/clinica/shie...
Adottare un cavo di questo genere è forse il primo passo verso la consapevolezza dell'importanza delle interconnessioni e rappresenta una buona soluzione per risolvere problemi di qualità quando non si voglia spendere una fortuna, peraltro con la paura di sbagliare.
Prima di andare avanti leggete, se non lo avete ancora fatto, l'intervista a George Cardas, quella a Tommy Jenving (Supra) e poi visitate il sito Kimber Cables.
Lasciando da parte le elaborate geometrie costruttive, non alla nostra portata, la configurazione elettrica che sto per proporvi permette, a chi usa normali coassiali sbilanciati (1 conduttore + schermo per intenderci), di capire prima di tutto che anche i cavi suonano e che quel cavo dal nome così esoterico, avuto d'occasione a sole 100.000 lire, è molto adatto alla sua sala d'ascolto per il magnifico colore della guaina, molto intonata alla tappezzeria.
Tenete bene a mente la Regola Fondamentale: i cavi non aggiungono MAI nulla al segnale, non lasciatevi abbagliare.
Cancellano sempre qualcosa e proprio il tipo di cancellazione apportata determina il loro carattere sonico che peraltro va inquadrato SEMPRE in relazione a tutto il resto dell'impianto. - Розваги
Funny I make my own diy RCA cables too,I built all my hifi equipment,and found this video by accident,I made my RCA cables with the same cable you are using,and they sound excellent,well done!
The Arrow points to the end where the return wire and shield are soldered together (the other end of the shield floats). No, the arrow doesn't indicate signal flow. All arrows then point to the PreAmp or Integhrated/Receiver. Yes, even between Amp and PreAmp.
This configuration constitutes a "Star Ground " with the Mains Ground at the Preamp.
Popularized by Bruce Brisson of MIT Cables (also adopted by Monster) back in the '80s.
Excellent video showing the difference in solder connections between ends when making a 'shielded RCA' cable. Thank you for posting.
For once, even without talking and a language that I can't understand, this video is one of the easiest videos to follow and makes total sense. Thanks
Thank you Sir. Finally a good explanation.
Nice one! Loved the legendary Piergiacomi cutters! Grazzie mille, saluti dall'Grecia
Nice work 👍
And what do you think of "shielded" cables (both shield ends connected) for turntable-to-preamp application?? Isn't it better choice? Thanks. Anyway best Cinch cable how-to video 👍
Very nice
It's confusing different ways to do it one did it with the 2 colours twisted together and soldered to the pin and the bare wire slodered to the back part, which is good way for unbalanced RCA for pre amp?
Ciao volevo chiedere con questa configurazione si può' collegare anche pre e finale sempre con la calza collegata al pre ?Ti faccio i miei complimenti per i tuoi video.
teflon ,indispensabile!
This means if you connect the source to the amplifier and the amplifier to the source it will not work ? So is there a configuration to make them work on any side?,I have RCA cables that work on any side ! Thanks!
Che tipo di cavo è stato usato nel video?
hi fi is it quality like system cable ? Does it give quality sound like expensive cable.thank you
Sarebbe curioso sapere quali diverse applicazioni trovano i due collegamenti uno con calza collegata e una senza
It's possible to make RCA 3->2 connection with Wireworld luna 7 wire? Luna has L and R wire separated in two separate insulation. Each channel has two wire strands, ground (earth - black) and signal (blue (L) or white (R) chanbel). I want make RCA cord to connect my CD with Amplifier. Which ends Should I connect to CD (with 2 or 3 wire). Great movie!!! Regards
Just to clarify - You need to Earth the Shield at the Source end, NOT the output end...? Is this correct?
Correct.
How i make wire table holder ?
Which END is the Arrow Pointing toward ???? The 3 Wire end, or the 2 Wire End?
BWWGL9 The 2 wire end.
Ottimo video, ho realizzato seguendo le istruzioni del video due coppie di cavi, una coppia per collegare il PRE al Finale ed un altra coppia per collegare il lettore CD, vi chiedo come vanno collegati i cavi? l'ingresso (freccia), va al Pre o al finale? lo stesso dicasi per il lettore CD
Where can I buy those arrow stickers? Great video! The best I've seen!
you can get sticker like that on ebay,he printed his own,I speak Italian so can read what he wrote
Ottimo video, ed esplicativo al massimo. Sarebbe però utile sapere come si chiama il tipo di cavo a 3 poli che ha usato.
Coassiale bilanciato. Si usa per cavi XLR e Jack trs sfruttando tutti e 3 i conduttori
Ciao Daniele,volevo sapere per piacere dove hai acquistato quell' apparecchio in ferro che tiene i connettori fermi?
Lo trova in qualsiasi brico center, o comunque ferramenta fornita.
@@claudiov428 grazie gentilissimo.
Ciao caro puoi farci vedere come saldare connettori da modellismo tipo xt60 connessione motori e dissaldamento e saldatura esc ?? Sarebbe top!!!
Perché la calza lato amplificatore non va messa?
There are better RCA plugs .......and also a better solder technique..........I see so many errors on the web , professional soldering can be learned .
But the principle of the cable is correct !
Next try maybe OCC .......
So the first end of the cable has 3 wires: 2 silver + copper wire. In second end the cable has 2 wires? Can someone explain this?
The 1st cable is professional microphone cable. It is primarily designed for use with gear that supports balanced or multi point connections using mono TRS or XLR connectors. In PA applications, cable shielding is not sufficient to adequately reject EM induced noise on the very long cable runs. In this system, the outer braided shield carries most of the EM induced noise to earth preventing most of it from entering the 2 signal conductors. One of the these 2 cores carries in phase signal and the other carries inverted phase signal. So the 2 signals are in opposite phase and would cancel each other to zero if connected together. However, any induced noise entering the cores would be in phase and of the same strength on both cores. At the input of connected equipment, the inverse signal core is phase inverted again. Now both signals are in phase but the induced noise on each line is opposite phase to each other. This means that when the 2 lines are connected together, the signal s are added in strength but the induced noise is cancelled as they were in opposite phase to each other. like +1 -1 = 0 or +.5 -.5 = 0. This allows very clean, high fidelity analogue signal to be carried over very long cable runs while on the unbalanced or single point gear, typically HiFi using RCA connectors, 3-5m signal cable is regarded as the limit of clean signal. Having said this, the practical acceptable length of unbalanced cable largely depends on the strength of EM induction in proximity to the cabling. You sound never run signal cables parallel with either power of speaker cabling for example. Other sources of EM are radio, WiFi, fluorescent lighting electric motors.......
Curiously, the 2nd cable appears to just have 2 cores and no shield, I would not regard such cable as suitable for HiFi RCA connectors because it would not reject EM induction. Normally, I'd use either a shield with single core or shield(s) with 2 cores. IMO, the best balanced cable has a separate braided shield for each core which helps prevent cross talk induction between the signal lines. I hope that helps.
@@kenwebster5053 Hey Ken, that's for this amazing reply!! Man, that's a lot of work. Thanks. It is even more curious, What I meant by second cable, is actually the same cable. Doesn't he do the first end, (I wrote first cable) and then flip it over and start on the other end (I wrote second cable). So on side of the SAME cable it appears to just have 2 cores and no shield. That's why I wrote my question. I was/am confused.
@@rmmr8513 Oh ok, I missed that but see what he is doing now. Normally with RCA, you would just have a shield and single core but what you describe is actually quite cleaver I and I missed it. The shield in unbalanced connection is used not only to deal with induced noise but it is also the signal reference voltage. Often people call this zero volts but that isn't true in an absolute sense. It isn't actually zero. It's just that the signal voltage is like AC except it varies in amplitude and frequency and waveform according to the sound waves it represents. This signal voltage varies + & - around the reference voltage. For this reason, the reference is considered zero relative to the signal.
So now, you may see that it is important that the reference voltage be as stable and constant as possible. What happens if the shield has induced noise is the reference may not be quite so stable especially if the noise is significantly impeded from grounding. So what he is doing is grounding the shield at one end only. He has trimmed the shied at the other end so that it does not connect the induced noise directly to equipment at that end.
This explains what I questioned in that one of the cores is connected to the shield at one end only, leaving the other end as a more stable shielded signal reference for the connected equipment. So the strategy here is to reduce the signal reference noise for the connected equipment as the 1st end has the induced noise grounded.
Cleaver no?
It is actually similar to a work around connection used in PA for connecting unbalanced sources to a balanced devices where the right equipment is not available.
This also explains the arrows as they indicate which end has the grounded shield. At this time, I believe this should plugged in to ground the noise to the same single grounding point, usually an amp. However be aware that some amps are not grounded. In Australia, Yamaha commonly do not ground their amps presumably to reduce the likely hood of ground loop hum. So I think I need to look into this a little more to fully understand all cases.
So thanks for that, it has made me think it through better.
Ken
@@kenwebster5053 Ok cool. "So what he is doing is grounding the shield at one end only. " I understood about 10% of what you are describing but I think I get the idea. :-)
Thanks!!!!
Ricable do it from dedalus up to the rest of the line, I am downgrading it because I have otl monos…a pain in the ass to localize this problem .
Ciao, mi puoi dire quali connettori rca hai usato ?
Solder the ground wire before trimming it
The main picture says: ” please don’t risk me with the cocodrile”
Be carefull with this things.
Tnt-Audio da manuale
perche da una parte lasci la calza dall'altra no?
Grazie
Dovrebbe essere una sorta di cavo sbilanciato,e suonare meglio. Io almeno io ho provato a sostituire i vecchi cavi RCA sbilanciati, e fatti anche con ottimo materiale con un paio di questo genere, che hanno cioè in questo caso una direzione obbligata. Il suono ringrazia, e non poco. Peccato solo nel video non dica come si chiama questo tipo di cavo, sarebbe interessante provare a costruirne uno.
The ARROW "points towards which END" the 3 Wire end, or the 2 Wire End ?
Direction of signal would make sense, wouldn't it?
The shield of the cable is only connected to one end of the conductor,in his case it was the conductor with the clear coating,the other end you just trim the shield flush with the cable jacket,but making sure none of the shield you trimmed flush makes contact with the terminal,and so the end that has the shield and conductor solded together and attached to the terminal becomes the end you plug into your source.
It's a nice video Bro, but it is misleading to entitle it in ENGLISH, and then when all of us who speak English watch and just see all Italian subtitles...???
I cavi non aggiungono e non tolgono a meno che tu non stia impiegando sugli ingressi un cavo estremamente lungo e dalla capacità specifica abbastanza elevata oppure per gli altoparlanti un cavo molto lungo e sottile (in relazione alla lunghezza).
Nel primo caso la conseguenza può essere un'attenuazione delle frequenze più alte (ma, tranne che per l'ingresso "phono", ce ne vuole che ce ne vuole...) nel caso degli altoparlanti un cattivo controllo dei movimenti della membrana del woofer soprattutto nei diffusori non a sospensione pneumatica.
DI TUTTO IL RESTO NON È VERO NULLA !!!!!!!
Le orecchie sono lo strumento di misura più fallace ed influenzabile che esista. Fisica e matematica garantiscono che sono tutte baggianate per chi non conosce la materia.
Decenni fa l'Hi-Fi costava un botto (non senza motivo come ora) ed era destinata ad un pubblico competente. Poi hanno incominciato a vendere PSEUDO Hi-Fi anche nei supermercati ed i fruitori di quella che oggi chiamano Hi-Fi sono completamente a digiuno di elettronica. Produttori disonesti (e commercianti spesso pure) ne stanno approfittando per vendere le cose più assurde e che come efficacia non vanno oltre quella di un... amuleto !!!
Aprite gli occhi gente!
Direction arrows on the cable! 🤔😂😂😂
I believe the arrows indicate at which end the shield is grounded.
The side with grounded shield should be connected to the source i.e either amp or ore amp and the side with no ground connect to speaker
@@hamidnia7242 What if the source is an ungrounded (DC powered) DAC and the destination is a grounded amp? Also, are you suggesting there is any perceivable advantage in shielding passive speaker cables? Have you calculated the change in S/N dB on microvolt noise on a 50+ V signal?
He grounded both side of the cable he just put it in a different spot but they both have a ground hooked to the putter part of the terminal.
@@jamesfair9751 no he didn't he grounded only one end,I make my own cables and coincidently he used the same cables as I did,that is why the arrow was put on the end he grounded to the terminal/connector,which indicates that is the end you connect to the source.
Follow IACS, brass sucks. Age of Tellurium copper
Your title doesn't make sense. How to make sounding audiophile ?
I can tell English isn't your first language.
can't say much about video, but it is one of these with just stupid sound, so no real value