I skimmed the video and a few plans on Etsy - and kept thinking that there needed to be a diagonal brace or a sheet of plywood for additional strength.
If you look at the space it is designed for in the thumbnail you see it won’t need cross brace. Glue is unnecessary and a waste of time. Especially if you want to disassemble.
Pro tip…… Always cut your longest pieces first. That way maybe you can get some of the smaller pieces from the scrap. It also gives you the the opportunity to use then for the smaller pieces if you screw up
Thanks for the cut list, the source of your bins (Lowes) and the assembly video. My wife and I are organizing our garage and basement. I appreciate the time you took to help me build it efficiently.
Thanks Tech Teacher! Nice video and clear instructions. With this as a starting point, viewers can make their own version to suit their particular application. If you don't plan to occupy every shelf with bins, you could add some intermediate horizontal rails (keeping within the overall spacing module) , and with a piece of plywood make an open shelf/tray to slide in. Add some sides to the shelf/tray if needed to strengthen it, and it can be a handy way to keep hand tools and other smaller miscellaneous items accessible. I was passing by a donut shop, and I saw they had a mobile frame with aluminum angles every 3" or so to hold baking trays. I don't need that many donuts, but it looked like a good idea for storing hand tools on a tray. Similar idea to your tote storage rack in a different material and scale. Very nice job, thanks again.
Thank you for this video. I just bought 8 bins from Lowes. They were $10.98 each bin. Someone shared that they could have a strong plastic smell. I went and smelled every bin I bought. I picked the ones that didn’t have a strong plastic smell. They are there. You just need to find the ones that barely have a smell. I also made sure all lids clicked well to the bin. Each one did with no problems. I picked Lowes since my Costco membership ends in a month and I wont be renewing. So I picked Lowes since I can always go back for more later. Plus the lid stacking will match. Hope this helps anyone
Love this. If you put what was each bin in an individual excel file. Then create a QR code for the corresponding excel. You can put the picture of the QR on the front of the bin. Then scan the bin with your phone to see what’s in what ( and label bins 1-10 )
@@mikeclaverie9240 You could also just have a QR code that brings up a link to a photo of what is in the tote on a google drive shared file link. But if you ever wanted to be super organized an excel with everything in all totes that could be sorted by item would be ideal
Great project, only adjustments I'd make would make are 1) pressure treated for the bottom horizontal frame 2) I'd rip the 2x4 to 2x2 for the sliders. 3) wood glue and air nail the sliders, faster, cheaper, and glue is stronger than 2 screws
What kind of nails would you use with the wood glue? From my understanding the glue is what will hold it, and the nail is just to support it while the glue bonds, so would a brad nailer work?
That for sure would make it stronger but if there ever comes a time to move/disassemble the project just having screws will come in handy. Also screws are more than enough holding strength for one storage tote
@@Spagyr If it's sitting on bare concrete, it should be pressure treated, especially if it's in an unconditioned space. Doesn't have to be prone to flooding to incur gradual moisture damage.
There are several out there but your video is probably the best at explaining what, how and why you did what you did. The drawing you gave with the explanation that it is for Lowes tote is GREAT. It allows us to see the general plan and easy to modify it to fit the brand of tote we are using. Nearest Lowes is 180 miles away HD and Menards are about 5 miles from the house.
I write on the black plastic using a silver sharpie, which can easily be wiped off with alcohol. I have tried printing labels but sometimes they peel off.
I recently used a lot of those totes for a move, and found out that the Costco and Home Depot ones are slightly different and don't nest within each other. According to specs they are all different sizes. Dimensions in inches: Costco 30.4 x 20.4 x 14.7 Lowes 30.6 x 20.6 x 14.3 Home Depot 28.5 x 19.6 x 15.1 Maynards 28.5 x 19.375 x 15.25
Really enjoy your builds and content. Showing my wife this and I know it will be a build for the basement. Brother, some day, please put together plans for that workbench. I have all the same tools. Thanks again!
I've watched a few videos on making these and this is the best demonstration of the process I've seen. Thanks, this is going to be my project for this weekend!
If you put full width piece of plywood across the bottom instead of the wood rails you could add a lot of versatility. You could hold just as many totes, and could also be a shelf!
The only thing I would suggest is, if you are putting in basement as you are or garage.. you will have moisture. for bottom plate I would suggest a pressure treated lumber for that section.. is it required no.. will if give you a few more years yes, esp if you are in a humid area like the PNW or SE part of the US.. ( @3:50 )
also depending on the weight of the bins, I would suggest a cross brace on the back side. in the shape of an "X"incase you have side to side shifting (like maybe an earthquake) just a thought..
You could definitely rip those 2x4s down half an inch and use 1/2" ply for shelves without really losing an appreciable amount of strength if you wanted shelves, and then you still get something better than a shoddy warped 2x2.
Great project. Thanks for the plans. Looks very clean. With so many repetitive cuts, an auxiliary fence on your saw and a stop block would probably have saved some time.
I like your builds because they are attainable for the majority of folks with a basic garage or basement and don’t plan to make a living youtube woodworking. The fancy builds are fun to watch but not practical for 99% of us.
Yes, but a concern is tipping. So I may build as separate pairs of stacks (as opposed to individual stacks) on casters to give it more stability. The individual stack model works well for Festool sustainers, but the carts have a pretty wide stance relative to the containers.
I like them, great idea! Also I would think don't overpack your bins as it might be hard to pull them out...too heavy LOL...but of course many factors. Don't think it will tip over..maybe consider adding wheels to the bottom to move it around the garage but see what you can do for bracing if needed so it doesn't fall over.
Thanks for sharing. This is on my list for the spring. My complication is the basement floor sloping away from the walls for drainage. Hopefully it's not too bad and I can just throw shims under the front cross braces. I currently have bins from Costco and Sam's club. Most are from Sam's so I'm now stuck with them and hoping they don't change suppliers soon. LOL
Where i live at least, 2x2s are the same price as 2x4s so i never buy them. When I built hnging shelving i actually ripped 2x4s into 2x2s to frame them up to save money
I started buying the next size up lumber and ripping it down to the size I want. Post pandemic pine is cut from the smallest tree they can get away with. As long as people keep buying that crap the Big Box stores will keep selling it.
Thank you for explaining the tote differences. I think the one thing I'm more curious about is each totes strength from the 2 basically. As you said the 2 from home depot and menards are pretty similar but lowes is different
lol I never watched the ending where you stated the sizes vary. I used HD totes and used your 15”dimensions on the spacing between. HD totes are taller. I’m going to fix it though
Love the design! You need just one more thing to make it perfect... "what's in the tote?" (1) Load your tote, (2) Take a picture of the contents, (3) Download any FREE phone app for your phone (i.e. iPhone, Android, Microsoft, etc.) -- I personally use "Boxes: Storage made simple" for my iPhone, (4) make QR Code labels for each tote & slap 'em on the sides facing you. Takes all the guess work out of finding your circular saw or Christmas tree decorations!
I modeled his design in my CAD program. I can make a you a printer ready set for a small fee. I can also make adjustments to it for you to fit your exact needs, totes, etc.
Sorry of this is a dumb question. but in your diagram at 0:43 you show the lowest row being 9.5" and then 3.5" for the 2x4. However, in the next row above it, the distance is 15", subtracting the 3.5", it's 11.5". Why is there a different 9.5" and 11.5" between the first row and second row?
Did you consider waxing the runners under your totes Depending on the dust and weight of tote, it could ease getting them in and out. Great videos...watched 3 and am impressed.
Sams club tote 27 gallon is currently 7.98 and same size exactly as those linked from lowes in this video. If purchased today from Lowes they would be 9.98 rach
I'm going to do this as my first DIY project with my new miter saw. And as a new DIY person, I'm curious what that drill bit is that leaves the little groove for the screw? Also what kind of screws do you use and is there a rule-of-thumb when you're choosing what types of screws to use for certain jobs?
when i built my shelves i looked into the tote sizes. im betting for most of the totes shaped like this there is probably 2 main manufacturers or facilities. i found really only 2 different dimensions like you mentioned. lowes and walmart (red lid) should be the same size verses most other places (home depot, menards, costco) had the taller dimensions. one other thing i found was the taller totes had more reviews (that i found) with issues of failure and qc stuff (plastic strings around injection points). just some extra info. i would be interested in a load test between the different tote sizes and the frame with 2x4 sliders and 2x2 sliders, i would assume the totes would fail well before the wood.
I have a question please. Does your drill bit automatically drill out for the head of the screws to fit flush? If so where did you get that? Also the screws length is 2 in?
I really need to build one like this, but my concern is the weight of my tote boxes. I got a few heavy ones. Will the edges break or the whole box fall off due to weight?
Hi, I took a screenshot of the drawings because I also had bought Lowe’s totes. Looking at the measurements, the first row shows 9.5. Is that accurate, when the total of the second row is 15?
The 9.5-inch height on the first row is measured to the bottom of the 2x4. The compatible measurement to the top of the first 2x4 is 13 inches. The first spacing is 13". The additional row spacings are 15". Also, there are 2" spacings above the top row.
@anthonystachowicz4322 The support for the first row is 13 ins because 2 ins the container on the first row will be above the first support. The second row from the bottom has to account for the 2 in over hang from the first row container and the 13 in under hang front the second row container. So it's 15 ins. It continues up from there. Also, your top row supports need to have 2 in clearance above the supports to account for the top containers 2 in over hang above the top support. Hopefully, that makes sense?
Why dark black sides? You can't see the content that way. And you needed to note why one is a shorter at the start, not near the end. Could casters be put on the bottom to make it movable?
Great video. What was your decision making process to not add a bottom slate for the tote to rest on. Worried that over time the lip of the tote will begin to give way and sag without it.
Thanks, I did think about that but more or less I took inspiration from the ones I have seen online from other crestors. I guess only time will tell if the lips of the bins are strong enough but so far it looks to be ok.
Very well explained, filmed, and demonstrated. Love the extra durability features. have you noticed any sag on the bin edges as they've been supported by the bin lip since you situated them? Also, what software did you use to draft your plans up?
Love how simple it is, but unfortunately, I know what happens when you put stuff in big black bins with lids. If you can't see what's inside, consider it gone.
I use blue painters tape and a retractable sharpie to "name" almost everything. Doesn't matter if it is a clear tote, cardboard box or a black tote, it gets a blue tape label on the front, a side and maybe even the top.
What software did you use to map out your plans? I love this project and planning a few myself that are similar but havent found a good way to plan it out like you have here
I volunteer for a pet food bank and this is exactly what I want to build for our storage unit. Thanks for the plans.
Np, hope it goes well.
Screw some plywood to the back for stability, these internet racks are dangerously unstable.
To strengthen it. Take a scrap 2x4 and cut both ends at a 45° and screw it to the back corners. Simple corner brace and will take all that sway out
I came to the comments to say this. Great comment Don Fron!
I skimmed the video and a few plans on Etsy - and kept thinking that there needed to be a diagonal brace or a sheet of plywood for additional strength.
Also need to put wood glue like Tightbond at each connection point !!!
If you look at the space it is designed for in the thumbnail you see it won’t need cross brace. Glue is unnecessary and a waste of time. Especially if you want to disassemble.
Pro tip…… Always cut your longest pieces first. That way maybe you can get some of the smaller pieces from the scrap. It also gives you the the opportunity to use then for the smaller pieces if you screw up
Thank you!
Thanks for the cut list, the source of your bins (Lowes) and the assembly video. My wife and I are organizing our garage and basement. I appreciate the time you took to help me build it efficiently.
where is the material and cut size list?
lol never mind
Thanks Tech Teacher! Nice video and clear instructions. With this as a starting point, viewers can make their own version to suit their particular application.
If you don't plan to occupy every shelf with bins, you could add some intermediate horizontal rails (keeping within the overall spacing module) , and with a piece of plywood make an open shelf/tray to slide in. Add some sides to the shelf/tray if needed to strengthen it, and it can be a handy way to keep hand tools and other smaller miscellaneous items accessible.
I was passing by a donut shop, and I saw they had a mobile frame with aluminum angles every 3" or so to hold baking trays. I don't need that many donuts, but it looked like a good idea for storing hand tools on a tray. Similar idea to your tote storage rack in a different material and scale.
Very nice job, thanks again.
Thank you for this video. I just bought 8 bins from Lowes. They were $10.98 each bin. Someone shared that they could have a strong plastic smell. I went and smelled every bin I bought. I picked the ones that didn’t have a strong plastic smell. They are there. You just need to find the ones that barely have a smell. I also made sure all lids clicked well to the bin. Each one did with no problems.
I picked Lowes since my Costco membership ends in a month and I wont be renewing. So I picked Lowes since I can always go back for more later. Plus the lid stacking will match. Hope this helps anyone
Love this. If you put what was each bin in an individual excel file. Then create a QR code for the corresponding excel. You can put the picture of the QR on the front of the bin. Then scan the bin with your phone to see what’s in what ( and label bins 1-10 )
That's a brilliant idea.
@@mikeclaverie9240 You could also just have a QR code that brings up a link to a photo of what is in the tote on a google drive shared file link. But if you ever wanted to be super organized an excel with everything in all totes that could be sorted by item would be ideal
when did masking tape and a sharpie go out of style?
@@oppassumSounds much easier.
Great project, only adjustments I'd make would make are
1) pressure treated for the bottom horizontal frame
2) I'd rip the 2x4 to 2x2 for the sliders.
3) wood glue and air nail the sliders, faster, cheaper, and glue is stronger than 2 screws
What kind of nails would you use with the wood glue? From my understanding the glue is what will hold it, and the nail is just to support it while the glue bonds, so would a brad nailer work?
That for sure would make it stronger but if there ever comes a time to move/disassemble the project just having screws will come in handy. Also screws are more than enough holding strength for one storage tote
@@cellphoneserenade9115Agreed
Pressure treat for regular flooding your right I’m sure the bottom plate will rot out very soon.
@@Spagyr If it's sitting on bare concrete, it should be pressure treated, especially if it's in an unconditioned space. Doesn't have to be prone to flooding to incur gradual moisture damage.
Perfect timing, I'm getting ready to finally up my storage in my garage and this just might be the perfect solution. Well done sir!
Thanks, glad this could possibly help in some way
There are several out there but your video is probably the best at explaining what, how and why you did what you did. The drawing you gave with the explanation that it is for Lowes tote is GREAT. It allows us to see the general plan and easy to modify it to fit the brand of tote we are using. Nearest Lowes is 180 miles away HD and Menards are about 5 miles from the house.
I like the yellow lids because you can use a Sharpie to label what you put in them. Plumbing, Electrical, Tileing, Motorcycle Parts, and Fishing.
I put clear tape on the yellow lid and then write on the tape with a sharpie. This way I can remove the tape and re-label if we change the contents.
I write on the black plastic using a silver sharpie, which can easily be wiped off with alcohol.
I have tried printing labels but sometimes they peel off.
I recently used a lot of those totes for a move, and found out that the Costco and Home Depot ones are slightly different and don't nest within each other. According to specs they are all different sizes.
Dimensions in inches:
Costco 30.4 x 20.4 x 14.7
Lowes 30.6 x 20.6 x 14.3
Home Depot 28.5 x 19.6 x 15.1
Maynards 28.5 x 19.375 x 15.25
Thank you
Looks like Costco & Lowes or HD & Maynards might be "close enough" matches?
Can you explain where and how you took these measurements? Or are these the measurements given on each label?
@@gregvence7356 can confirm they're close in practice, unless you get the lids mixed up, they just barely disagree with one another there.
Suggest you run a piece of gulf wax along the tops of the rails to help the bins slide.
Beautiful corvette ZR1. The C6 corvette is still my favorite looking generation of corvettes.
The flush mount saw table is genius.
It has come in handy!
Love this style storage. I just got new house, this will be in my garage...
Pre drill screw holes in to softwoods - pro move...
Really enjoy your builds and content. Showing my wife this and I know it will be a build for the basement. Brother, some day, please put together plans for that workbench. I have all the same tools. Thanks again!
Thanks, I appreciate it and I really need to make time for that.
I've watched a few videos on making these and this is the best demonstration of the process I've seen. Thanks, this is going to be my project for this weekend!
Excellent tutorial and information on plan design. So glad you explained the different measurements in bin Make\models. Saved me a huge headache!!
If you put full width piece of plywood across the bottom instead of the wood rails you could add a lot of versatility. You could hold just as many totes, and could also be a shelf!
6:41 He said why he didn't do that
The only thing I would suggest is, if you are putting in basement as you are or garage.. you will have moisture. for bottom plate I would suggest a pressure treated lumber for that section.. is it required no.. will if give you a few more years yes, esp if you are in a humid area like the PNW or SE part of the US.. ( @3:50 )
also depending on the weight of the bins, I would suggest a cross brace on the back side. in the shape of an "X"incase you have side to side shifting (like maybe an earthquake) just a thought..
you could also screw a 1x3 cross to the back of the unit to stop it from wabbling when it's free standing.
An OCD dream right here. Great idea and another great video :)
You could definitely rip those 2x4s down half an inch and use 1/2" ply for shelves without really losing an appreciable amount of strength if you wanted shelves, and then you still get something better than a shoddy warped 2x2.
AWESOME step-by-step video, Bro! I've been trying to make the storage for my plastic boxes for some time now. This will help me so much. Props to You!
Love the tote storage idea. Great video!!
Thanks!
Great project. Thanks for the plans. Looks very clean.
With so many repetitive cuts, an auxiliary fence on your saw and a stop block would probably have saved some time.
Thanks, I didnt put that in the video but I have the 3D printed one from Shop Nation
Uwaah! Looks really nice, neat, very organized. 😊 I’m jealous. Thank you for sharing the details of your design. 👍
I would consider a composite or similar for the bottom plate to avoid moisture wicking and rot
I'd probably use pressure treated or stained
@@unknown_Noname451 composite would not contaminate
Great video. The builds are always so clean!
Appreciate it!
Pre drill and screw works for me too. 👍
That's what I like to hear!
I like your builds because they are attainable for the majority of folks with a basic garage or basement and don’t plan to make a living youtube woodworking. The fancy builds are fun to watch but not practical for 99% of us.
Man that looks great in the place you installed it 👍
Thanks for this video, I really enjoyed watching. I liked your idea for getting 3 equal length boards out of an 8’ 2x4.
Thanks for this. We'll done. My only wish is that you told us how many 2x4s you used.
Thank you for this video. Very helpful. I am going to start on this project today.
I look forward to your videos!! Excellent job as usual!
Glad you like them! Thanks
Great video. Would be cool to put some heavy duty castors on individual stacks.
That's a good idea I believe someone on YT made a larger mobile version of this.
Yes, but a concern is tipping. So I may build as separate pairs of stacks (as opposed to individual stacks) on casters to give it more stability. The individual stack model works well for Festool sustainers, but the carts have a pretty wide stance relative to the containers.
I like them, great idea! Also I would think don't overpack your bins as it might be hard to pull them out...too heavy LOL...but of course many factors. Don't think it will tip over..maybe consider adding wheels to the bottom to move it around the garage but see what you can do for bracing if needed so it doesn't fall over.
how sturdy are the tote bin rims? how much weight do you think it could hold before they start to bend/flex too much?
10/10 video as always
Appreciate it!
Thanks for sharing. This is on my list for the spring. My complication is the basement floor sloping away from the walls for drainage. Hopefully it's not too bad and I can just throw shims under the front cross braces. I currently have bins from Costco and Sam's club. Most are from Sam's so I'm now stuck with them and hoping they don't change suppliers soon. LOL
Where i live at least, 2x2s are the same price as 2x4s so i never buy them. When I built hnging shelving i actually ripped 2x4s into 2x2s to frame them up to save money
Good idea
I started buying the next size up lumber and ripping it down to the size I want.
Post pandemic pine is cut from the smallest tree they can get away with.
As long as people keep buying that crap the Big Box stores will keep selling it.
Thank you for explaining the tote differences. I think the one thing I'm more curious about is each totes strength from the 2 basically. As you said the 2 from home depot and menards are pretty similar but lowes is different
Brilliant, I will be building this soon!
That looks great. I need to make these.
like the presentation a lot,i will try this as a project!!
lol I never watched the ending where you stated the sizes vary. I used HD totes and used your 15”dimensions on the spacing between. HD totes are taller. I’m going to fix it though
Excellent video. Great tutorial and nice blue 🚙🏁
Awesome idea. Going to biuld one this weekend. Thanks
Great build. You covered a lot of information and options in your commentary. New subscriber 🙂
Nicely done. Great dimensions 😊 thank you
Love the design! You need just one more thing to make it perfect... "what's in the tote?" (1) Load your tote, (2) Take a picture of the contents, (3) Download any FREE phone app for your phone (i.e. iPhone, Android, Microsoft, etc.) -- I personally use "Boxes: Storage made simple" for my iPhone, (4) make QR Code labels for each tote & slap 'em on the sides facing you. Takes all the guess work out of finding your circular saw or Christmas tree decorations!
Do you have a version of the plans that are printer ready? Like a PDF or something?
I modeled his design in my CAD program. I can make a you a printer ready set for a small fee. I can also make adjustments to it for you to fit your exact needs, totes, etc.
Sorry of this is a dumb question. but in your diagram at 0:43 you show the lowest row being 9.5" and then 3.5" for the 2x4. However, in the next row above it, the distance is 15", subtracting the 3.5", it's 11.5". Why is there a different 9.5" and 11.5" between the first row and second row?
Did you consider waxing the runners under your totes Depending on the dust and weight of tote, it could ease getting them in and out. Great videos...watched 3 and am impressed.
Nice video, thanks for sharing. Putting this on my to do list.
Sam's club also has a black and yellow tote, I wounder how different they are.
Sams club tote 27 gallon is currently 7.98 and same size exactly as those linked from lowes in this video. If purchased today from Lowes they would be 9.98 rach
This works well think better than cabinets & not for garage's but if have daycare centers aswell
Good point
Best tutorial I have seen yet. Putting one in the shed that will hold 36 totes. What software did you use to draw up those plans and the 3D?
I'm going to do this as my first DIY project with my new miter saw. And as a new DIY person, I'm curious what that drill bit is that leaves the little groove for the screw? Also what kind of screws do you use and is there a rule-of-thumb when you're choosing what types of screws to use for certain jobs?
when i built my shelves i looked into the tote sizes. im betting for most of the totes shaped like this there is probably 2 main manufacturers or facilities. i found really only 2 different dimensions like you mentioned. lowes and walmart (red lid) should be the same size verses most other places (home depot, menards, costco) had the taller dimensions. one other thing i found was the taller totes had more reviews (that i found) with issues of failure and qc stuff (plastic strings around injection points). just some extra info. i would be interested in a load test between the different tote sizes and the frame with 2x4 sliders and 2x2 sliders, i would assume the totes would fail well before the wood.
I have a question please. Does your drill bit automatically drill out for the head of the screws to fit flush? If so where did you get that? Also the screws length is 2 in?
I really need to build one like this, but my concern is the weight of my tote boxes. I got a few heavy ones. Will the edges break or the whole box fall off due to weight?
I dont have an exact weight but I have a few that are pretty heavy and so far they are doing good.
Love this, and gonna be using to build one myself. Anyone know the best screw size to use for this?
When screwing multiple 2x4's together I normally use 2.5" to 3" screws
Hi, I took a screenshot of the drawings because I also had bought Lowe’s totes. Looking at the measurements, the first row shows 9.5. Is that accurate, when the total of the second row is 15?
The 9.5-inch height on the first row is measured to the bottom of the 2x4. The compatible measurement to the top of the first 2x4 is 13 inches.
The first spacing is 13". The additional row spacings are 15". Also, there are 2" spacings above the top row.
I can’t understand how the first row comes out to 13 inches but the other rows are 15 inches. Is that because it has a bigger space in between them?
@anthonystachowicz4322 The support for the first row is 13 ins because 2 ins the container on the first row will be above the first support. The second row from the bottom has to account for the 2 in over hang from the first row container and the 13 in under hang front the second row container. So it's 15 ins. It continues up from there. Also, your top row supports need to have 2 in clearance above the supports to account for the top containers 2 in over hang above the top support.
Hopefully, that makes sense?
@@halfurbanhalfsuburban8219 ahhh okay make sense now. Thank you for explaining that
@@anthonystachowicz4322🙏
Great job!!!!😎
I’ve just begun using these bins, and wonder if pressure of the weight of these bins would cause the sides (of the bins) to collapse?
Why dark black sides? You can't see the content that way.
And you needed to note why one is a shorter at the start, not near the end.
Could casters be put on the bottom to make it movable?
Great job.
Just built one of these took way longer than expected due to not building the ladders first haha
Are the totes designed to be supported on their edges like that? Wouldn't it be better if they were resting on their bottoms?
Great video.
What was your decision making process to not add a bottom slate for the tote to rest on. Worried that over time the lip of the tote will begin to give way and sag without it.
Thanks, I did think about that but more or less I took inspiration from the ones I have seen online from other crestors. I guess only time will tell if the lips of the bins are strong enough but so far it looks to be ok.
Thank you.
Outstanding! One question, how wide is the rack, one tote wide. So i can figure out how wide i can go. And how tall.
Have you experienced any breaking or warping of the edge of the totes from the weight inside the tote?
i want to use for inside a 6X4 trailer. Any ideas for locking containers in so they dont move.
Apologies if I missed this. What length screws did you use? Did you do anything to mount it to the wall for safety?
GOOD STUFF.
Will the totes move freely when they are close to full capacity/weight?
Did I miss a cost estimate for this excluding the totes?
I learned how to use this software in class #FineEducation #Cad2 #AcademicWeapon #Winningtheday
what software is it?
@@MrRuinit fusion 360 if i’m not mistaken
@@vleni_ thanks I have been trying to find the software everyone uses for these videos. I need to build some things
would 2x2x8's to run front to back for sliding the bins and supporting them not have been cheaper and lighter?
My guy, where’s your stop block?! Beautiful miter station with no stops!!? Haha
Thanks for the video! What software are you using to make the design and cut list?
Very well explained, filmed, and demonstrated. Love the extra durability features. have you noticed any sag on the bin edges as they've been supported by the bin lip since you situated them? Also, what software did you use to draft your plans up?
How did you buy the wood sizes you needed? Do you have the list? Trying to get this done with the cheapest possible cost. Thank you
What do you use for modeling the cutlist?
Love how simple it is, but unfortunately, I know what happens when you put stuff in big black bins with lids. If you can't see what's inside, consider it gone.
Put a piece of tape on the front and label it lol
I hear you on that but after I was done I found that Menards sells 27 gallon yellow lid bins that are clear so you can see inside them.
I use blue painters tape and a retractable sharpie to "name" almost everything. Doesn't matter if it is a clear tote, cardboard box or a black tote, it gets a blue tape label on the front, a side and maybe even the top.
whats the best miter blade to use (size thickness etc)
Where on the tote did you measure to get the centerline width dimensions for your rack?
What software did you use to map out your plans? I love this project and planning a few myself that are similar but havent found a good way to plan it out like you have here
Thankyou very good information
Glad you appreciate it!
I'm concerned spiders will move into the space between the rails. Might want to staple plastic sheeting on that
What brand bins are these and where did you buy them?
Great video exactly what I am looking for. What software are you using to design and spit out the cut list?
The rails you can put on the ceiling to hold the yellow toats are the best way
How about putting rolling casters on them?
How to figure space between the rails so that your bins will sit on them
Great plans. Any issues with racking?