Muito bom! Melhor demonstração do produto impossível, todas as dúvidas que iam me surgindo no decorrer do vídeo você foi demonstrando, muito obrigado pelo seu esforço!
@DJSickey no unfortunately that will not work because the protocol is different. The GPS version will work though, for example ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=hdebRPO3MIvRVOhH
Agreed the instructions could be better, I really like this one its very basic which is what I wanted. I like how its pretty much just the speed I'm going, I don't want distractions. Still struggling to figure out how to adjust the speed as the higher I go the more off it gets usually around 5 to 10 km. Pretty accurate till I go 40km or higher. Great Video thanks for making it.
Thank you I appreciate that. Thats interesting to hear how the speed reading is incorrect as your speed is increased, what year and model car do you have it installed on?
@@SHORTwithTECH A 2024 Mazda 3 Sedan, been rereading the instructions I think I might have figured out how to adjust it. Will try it out next time I go for a drive. I think I either need to either Press M and go to Speed that or hold M and go to 1 to adjust the speed.
@primezero6727 yeh, try this: 1. Press and Hold the M Button to enter the Settings menu 2. You need the first setting, which is Option 1, so you should see parameter 107 displayed now (in Kmh mode) 3. Now adjust the speed accuracy. e.g if Speedo displays 100Kmh but HUD displays 105Kmh then by default the algorithm should be 105-2=103 so simply change it to what you need. 4. Press and Hold the M Button to Save your changes and Exit Hope that helps you, if not then come back and we will try again, all the best
@@SHORTwithTECH Thank you for those very clear instructions, that fixed it for me. Its no longer off at both low and high speeds and is very accurate now, thank you very much for your help!
@primezero6727 No problem at all, your very welcome. Thank you so much for posting that feedback, it's very useful for my other viewers so I really appreciate it
@michal10utd69 unless your having a problem with it, I would just leave it at the default setting of '0' i have never needed to adjust this setting personally
@NuvaTRX yeh, you can give this a try : 1. Press and Hold the M Button to enter the Settings menu 2. You need the first setting, which is Option 1, so you should see parameter 107 displayed now (in Kmh mode) 3. Now adjust the speed accuracy. e.g if Speedo displays 100Kmh but HUD displays 105Kmh then by default the algorithm should be 107-5=102 so simply change it to 102 or the required value that you need. 4. Press and Hold the M Button to Save your changes and Exit
@Ostrovskymaksim-ir2pk Nice car! I haven't heard of that problem before. Does your Speedo also have the same problem? If yes then suspect possible faulty wheel speed sensor. If no, have you tried doing a factory reset with the HUD ? 1. Press and Hold the M Button to enter the Settings menu 2. Choose Option 12, now you should see parameter value 0 displayed on the screen 3. Change the parameter value from 0 to 1 4. Press and Hold the M Button to Save your changes and Exit Hope that helps you, keep the comments section updated on the result if you can
@imraniumb It should be fine but best to check with your supplier first to be 100% sure. If in doubt there is a GPS version available of the M3 aswell now which will have similar functionality to the M1 HUD ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=BokjtXBHUkAqOS5r
@TreyBenson01 To change it from Kmh to Mph 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
@dylannichols4072 it sounds like you have the newer GPS version or you have the M1 model and not the M3. The GPS versions are different, try option 5 instead. It shows you how in my M1 video review here ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=mocMUhylOHWiv2zV
@primosebas8033 You will probably need a diagnostic scan tool to get rid of the errors but if that happened just from plugging it in then it could happen again. Don't plug in the device with the ignition turned on either, if that's what you did? Depending on the year of the vehicle, you could try disconnecting the negative battery terminal aswell for 60 seconds but no guarantee that will fix the errors. If your jeep is a 2010 or later,don't try doing that
It’s happens to me a while ago.. it gives so many error, maybe because I plugin the HUD OB2 while the ignition is on. What I did it remove all attached to my car and restart my app. All errors is gone, I will try to plugin again tomorrow while the ignition is off, Hopes nothing happens. 🤞🏼
@droitzer your 100% correct. Never ever plug anything into the OBD2 Socket with the ignition turned on. When the ignition is turned on this wakes up the Canbus. You will definitely get errors doing that and some won't be easy or cheap to get rid of.
@melqui787 To change it from Celsius to Fahrenheit do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 9 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Celsius and 1= Fahrenheit, hope that helps you
Will this work on a 2014 Ford Fiesta 1.0? Sorry, I'm still new to this whole thing. I'm kind of hesitant to get one since I've been reading some comments saying they get errors on their cars once they connected it to their OBD2.
@blueberrymuffin2860 I've heard of problems with the Fords from others so cannot be certain. The GPS version will definitely work on your car and i can recommend it highly. The M3 GPS version will be very similar to the M1 GPS version which I reviewed a while back ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=Z20pcqvrMjhTpl3- hope that can help you out, all the best
@SHORTwithTECH I see, thank you for the reply. I'll look into it more and see if I'll be able to purchase the M3 model. Just to clarify. As long as it's a GPS version, it'll work, right? Either models will work on the car, yeah?
@SHORTwithTECH I noticed in a video on your channel where you were comparing the M1 and M3. The M1 or USB type has a 1 or 2 KM/H difference compared to the OBD2. Is that normal, or do I have to like set some calibrations on the device?
@blueberrymuffin2860 yes that is normal, you need to calibrate the device to match your particular speedometer in the settings of the device which you can do with the M1 and M3, but the M2 is not adjustable so for this reason i would recommend the M1 or M3 over the M2
Yes and No. You can't physically turn the overspeed alarm feature off, but you have two options to get around that problem. It can be set as high as 250Km so option 1 would be to set it to a higher speed or option 2 is just turn off the buzzer, there is a feature that just turns the buzzer off altogether. Hope that answers your question 🙂
Hola que tal, me puedes ayudar en programar para que coincida la velocidad del tablero con el display? Para que sea la misma velocidad en los dos. Muchas gracias
Lo siento mucho. no entiendo tu pregunta. La velocidad del HUD ya está programada para coincidir con el velocímetro de su automóvil y es muy precisa. ¿Es eso lo que quieres decir?
@2GE4EV Thank you for your comment, it turns on and off automatically with the ignition. No the transmission is not supported by any HUD, only the Engine is
I will look into doing that. I am actually filming another review on another HUD at the moment which will be uploaded in a few weeks but that's OBD2 aswell. This HUD is a very simple basic device but it is GPS and it is good so might be what you need ua-cam.com/video/AOfrtXDzQQA/v-deo.htmlsi=B2lBpwh37HdB8E9p
Mine worked on the day i installed it. Left it overnight. Next day it shows 3 stripes "loading". Then displays "0.0" for a couple of seconds and then flashes all the leds and turns off without turning on. When driving it shows "1" for a second then turns off. What is this caused by?
@ikkelolnl sometimes strange things like that happen with electronic devices. Just do a factory reset and it should be back to normal 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 12 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit hope that helps you
@SHORTwithTECH i got it to turn on again but it will randomly display "0.0" and turn off. It will also just show "0" for speed. I got it yesterday and installed it and it worked fine. Now it doesn't anymore. I'm driving an audi tt mk1 2001, with obd2. It worked before and overnight it stopped working... bit weird. It also wont let me access settings anymore
@ikkelolnl Try this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 10 3. If the the default value you see is '0' then change it to 13.2 4. Press and Hold the M Button to Save your changes and Exit If that doesn't work, check your obd2 port connections are clean
@SHORTwithTECH i've tried this and troubleshooted my obd2 which is fine as well. I might have gotten a faulty unit. I will try to test on another car tomorrow. Thanks for the help :)
Hello. I have a Mercedes E250 2013. I have the same HUD model. I tried several ways to adjust the speed, either it is correct at low speed and not at high speed, or vice versa. Please help me
@DanIva-vn7vn 1. Press and Hold the M Button to enter the Settings menu 2. You need the first setting, which is Option 1 3. Now adjust the speed accuracy. e.g if Speedo displays 100Kmh but HUD displays 105Kmh then by default the algorithm should be 105-2=103 so simply change it to what you need. 4. Press and Hold the M Button to Save your changes and Exit Hope that helps you
@@SHORTwithTECH Thank you for all the insights. In my case however, the offset increases with increasing speed. For instance, at 80km/hr it shows 84, while at 120 it shows around 128-130. Is there a way to fix this dynamic offsetting? Thanks again :)
@tanmaymishra8187 that can be a problem with OBD2 HUD's with some cars, which unfortunately cannot be fixed. In this case a GPS version which is not controlled off the OBD2 port can be a little bit better but of course with less functionality, for example the M3 GPS or the M1 GPS ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=xm66F0sS1cv5MYRI It will still need to be speed calibrated though for some cars
Very late but does the speed limit thing also beep when your in a 70 or 80 zone? I assume so and if so is there any way to change beep sounds or set multiple with this? Again I assume no
You are 100% correct with your assumptions. Yes the speed alarm will beep at whatever speed you set it to. And no, you cannot setup multiple speed alarms or change the sound of the beeping but like you I wish you could because multiple speed alarms would be a great feature to have
@ob1tovr yeh it's a great product. I will be uploading another HUD review in a few weeks so if your not urgent then maybe best to wait because the next HUD review is not one you will want to miss, im currently still testing it but it's a pretty amazing product
@@SHORTwithTECH ill wait then, im on my learners and i have 80 hrs atm and i wanna wait until im off my learners so i dont get to used to it then not when im doing my test
i got exactly the same hud display, but after plugged in. it only says 0 km/h and not changing anything while driving, how can i adjust it? hope u can help
@isaacongjb9152 Hi, once plugged in do a factory reset with the device. I do not have any experience with Proton unfortunately so unsure of the protocol being used
I just bought makingtec m1. But when the package came it was m3. Question, is it safe to leave it plugged in at the obd connection? Will it drain the battery? Tried it today and I also dont want to install the reflective film. For now i disconnected the connector. Scared of draining the battery. Btw using it on my nissan kicks sv 2024 model. Thanks
@noelurriquia8643 Hi, thanks for your comment. You just leave it plugged into the OBD Socket all the time. Yes it can drain the car battery but only if left plugged in for days at a time without the car being used, so if your leaving the car parked up for over a week without using it then I would recommend unplugging it, if the car is used regularly then you will never need to unplug it. It's designed to be permanently connected 24/7, hope that helps you
@SHORTwithTECH ok thank you. Got an upgrde. Was expecting only the m1 yesterday but when i unboxed it was m3. Thought i need to buy usb cable to mini usb. It won't void my car warranty right? 😅😅😅 that's why i was thinking to buy other cable than the included odb to mini usb cable.
@noelurriquia8643 no you don't want to replace the cable because OBD-USB=12 Volts where as USB-USB=5 Volts. Also you won't have most of the features anymore as they are controlled by the OBD Port only
@@SHORTwithTECH ok thanks then. Haha. Just new with car things, so literally i unplugged again in obd port for I will be working 8hrs. Scared of the battery drain. Haha. Later i will go to the mall for around 30-60 mins then by that time only i will try not to unplug. 😅
@noelurriquia8643 8 hours is nothing. You can leave it plugged in for days at a time, it won't drain your battery. On my VW I once left plugged in for 16-18 days without using the car at all, when I came back the car started up perfectly fine. You are over worrying about your battery, just leave it plugged in all day and all night over the entire weekend, your battery will be perfectly fine on Monday morning
@josebonilla4447 to change it from Kph to Mph 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
@sreysopanha7626 if it's a US model 2003, that's right on the crossover change point so possibly not. However this M1 GPS HUD will work on that car no problem ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=_eINoA8gLD_bj2uT
@sepehr1257 by default yes it would so you need to change it from Kmh to Mph 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
Yes it does support auto brightness. I don't know why it says only gasoline cars on there website, I cannot guarantee it will work with your car, its best to ask the supplier first. One advantage of a GPS HUD over a OBD2 HUD is that it will work with all cars so something like this will work on diesels aswell ua-cam.com/video/AOfrtXDzQQA/v-deo.htmlsi=YkzFDQ0UFCmBr0tf
@suss_ryzeyt8031 Try unplugging device and reconnecting. You can also try a factory reset under Option 12. If that doesntvwork its possible it's not compatible withn that vehicle
@juelxhetani3023 the OBD2 version can drain the battery but only if the car is left unused for a few weeks so only over a long period so its definitely nothing to be concerned about
Thanks man. No it's not blurry in reality, it's very clear in all lights although I do agree the video does make it look blurry, sorry about that. Yes it does have an auto photosensitivity mode or you can also adjust it manually with its 10 brightness settings
To switch to MPH do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
@colin5789 Try a Factory Reset first, to do that do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 12 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit Now switch it to MPH again like this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
What year and model EV is it? Is the car battery voltage displayed correct? Does the temperature reading seem to be accurate? Have you cleared the fault codes through the HUD?
It is a 2022 model MG4. I only have readings for the car inside and outside temperatures, but cannot confirm the temperature of the motor. I have not adjusted any of the HUD settings, but left them as set by the manufacturer.
Do you mean hybrid was a gas/petrol engine or a straight EV? Depending on the vehicle, there may not be a water temperature sensor... so it might pay to talk to the car dealer or local agent
@dylannichols4072 it sounds like you have the newer GPS version or you have the M1 model and not the M3. The GPS versions are different, try option 5 instead. It shows you how in my M1 video review here ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=mocMUhylOHWiv2zV
@Chris2k33 To switch to MPH do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
Happens to me a while ago, so many errors maybe because I plug in the OB2 while the ignition is on. What I did is I restart my mobile app and unplug everything in my car and it backs to normal. I’ll try again tomorrow plug-in the HUD OB2 while the car is off then let’s see if the problem will came back. Hope not..🤞🏼
This is true but it’s better then gps as that can’t change with conditions like wind or tunnels, if you know how much your speedometer is off by then it’s fine
Hello there! Thanks for the uploadt! Does it changes between displays automatically? If I wanna see the water temperature sometime do I need to press the buttons while driving? Is it in Celsius? Thanks!
Hi, no it doesn't change automatically, you need to push the button if your driving but when you stop and turn off the Ignition you can set it up to display the temperature for you automatically just before it shuts down. Yes its Celsius by default but it can be changed to fahrenheit in the settings, hope that helps you 🙂
@@ramdhanid.4188 oh, 2011 is not an old model. I would expect that to work no problem. Is it just the speedometer feature that is not working? Do the battery and temperature features work? Does the cars original speedometer work?
@ramdhanid.4188 I don't have alot of experience with Nissan unfortunately but i would expect all Micras from 2007 onwards to work with this device. Do you know how to read live data parameters through your OBD2 port? If you can successfully read the parameters then the problem is with your HUD so open it up and check for poor soldering or bad connections is what i would do. If you cannot read parameters then it means a 2011 Micra is not compatible with this device which is surprising to hear
Hi, yes it can, you need to do this: Press and Hold the (-) Button for a few seconds to turn the buzzer Off. To Turn the buzzer back on again repeat the same procedure. Hope that helps you out
I’ve plugged it into my car, however it’ll read the battery voltage but not my car speed. It remains at 0km although I’m driving. It’s a 2008 allion Toyota vehicle. Any advice?
@dejavuprince193 ok so this means that it is not communicating with the obd2 port of your car. It powers up fine though so it's either faulty or not compatible with your car. Is this a US version?
To switch to MPH do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
@user-hm3vg5mc4x just like any product you connect to a cars battery, eventually it will drain the battery. Its just a warning from the manufacturer, you dont need to be concerned about it
1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
Mine stopped working after a year. Now it tried to start up, but ends up just faintly and really fast blinking the temperature and a small -. Is it dead?
@Henrque123 Sorry to hear that. If you are able to bench test it and test the cable I would recommend trying that first, if none of that is successful the device may need to be replaced from what you are describing
@Henrque123 it all depends on the type of HUD you want. I have not experienced any problems with the M3 but sometimes you get faulty products. If you want OBD2, I personally like the Konnwei KW206 ua-cam.com/video/OC91Q_kV7sg/v-deo.htmlsi=ygdU5Tq6Y6xzOTIn If you want GPS i am a big fan of the M1 ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=XgG80qecyUEralR5 I personally would rate those 2 over all the others on my channel so far. There is another HUD review coming out in a few days which is also good but i don't think it will be for everyone
@@SHORTwithTECH ohh okay thank you so much for the reply. I was just curious that's all. Thank you! Just curious are most OBD2 speedometers accurate like this? Cause I got a GPS one and it is way off and delayed
@australianllama3114 sorry, i'm unsure of other devices, this is the only HUD i have reviewed so far and I can definitely recommend it. Have a great day
Sorry I'm not 100% sure. If it's a late model I'm guessing it should be ok. So far from what my viewers have told me, Nissan has been a problem, Mazda was fine and VW but no one has mentioned Toyota. The supplier will be able to confirm that for you though, contact them through this link, best of luck, please keep us all updated incase others are trying to install it on that same car a.aliexpress.com/_m0XqjQi
It should work on a 2011. Best to check with the supplier to confirm that year first though. Here is the link a.aliexpress.com/_mKqrZFM. Hope that helps you, have a great day
@@SHORTwithTECH yes, I am thinking that on Alibarber there are other factories making 'knock-offs'.....many different outfits are selling them....... might explain why some peoples 'M3" seem to work differently or not work.
Yes you can, you need to do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
To switch to MPH you need to do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you
@morganmcguinness9923 that's interesting because mine is perfectly accurate. Are you referring to the speed accuracy? What type of car did you install it to?
Not trying to rain in your parade, I think these devices are great, but I am concerned about they being plugged and pulling the data constantly from the ECU...the "brain" of the car so to speak...this could burn the electronic unit? the obd2 port is not made for continuous data pulling after all... just wondering if it's safe to use all the time.
Your Gateway will not burn out, the OBD2 Port is just a communication port. If this concerns you there is always a GPS HUD which doesn't connect to your car at all and works just aswell but with limited functionality compared to OBD2 of course, for example, like this one ua-cam.com/video/AOfrtXDzQQA/v-deo.htmlsi=CKTHDs4_ddCbQSUR
Muito bom! Melhor demonstração do produto impossível, todas as dúvidas que iam me surgindo no decorrer do vídeo você foi demonstrando, muito obrigado pelo seu esforço!
Thank you very much 😀👍
Thank you for your demonstration video, it is very helpful.👍
Do I have to turn on the product manually every time I start the car?
@ALASKBR Hi, no you dont do that,, this HUD turns itself On and Off with the Ignition
I wonder if these headsup displays can work with 93's mazda 323f lantis which has obd1 (but i boughts to obd2 converter) 🤔
@DJSickey no unfortunately that will not work because the protocol is different. The GPS version will work though, for example ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=hdebRPO3MIvRVOhH
Thank you. Does it obd2 work for subaru?
To be 100% sure it's best to ask the supplier. Here you go:
a.aliexpress.com/_msPoUc2
Agreed the instructions could be better, I really like this one its very basic which is what I wanted. I like how its pretty much just the speed I'm going, I don't want distractions. Still struggling to figure out how to adjust the speed as the higher I go the more off it gets usually around 5 to 10 km. Pretty accurate till I go 40km or higher. Great Video thanks for making it.
Thank you I appreciate that. Thats interesting to hear how the speed reading is incorrect as your speed is increased, what year and model car do you have it installed on?
@@SHORTwithTECH A 2024 Mazda 3 Sedan, been rereading the instructions I think I might have figured out how to adjust it. Will try it out next time I go for a drive. I think I either need to either Press M and go to Speed that or hold M and go to 1 to adjust the speed.
@primezero6727 yeh, try this:
1. Press and Hold the M Button to enter the Settings menu
2. You need the first setting, which is Option 1, so you should see parameter 107 displayed now (in Kmh mode)
3. Now adjust the speed accuracy. e.g if Speedo displays 100Kmh but HUD displays 105Kmh then by default the algorithm should be 105-2=103 so simply change it to what you need.
4. Press and Hold the M Button to Save your changes and Exit
Hope that helps you, if not then come back and we will try again, all the best
@@SHORTwithTECH Thank you for those very clear instructions, that fixed it for me. Its no longer off at both low and high speeds and is very accurate now, thank you very much for your help!
@primezero6727 No problem at all, your very welcome. Thank you so much for posting that feedback, it's very useful for my other viewers so I really appreciate it
Which value do you reccomend for settings no 10 "Turn-off voltage"? I dont have any hybrid or car with automatuc turn-off system.
@michal10utd69 unless your having a problem with it, I would just leave it at the default setting of '0' i have never needed to adjust this setting personally
@SHORTwithTECH
Thanks!
Are there any MOT implications, with regard to obstructing the view through the windscreen?
Thank you for your comment. No
Hi. Did you end up taking off the reflecting film? Does it hinder the view? i.e., less transparency.
@zhuancaowumaoman1184 i personally never use the reflective films because I do not like them. The Visibility is more then adequate in my opinion
is there a way to fix speed? mines is reading 20 to 40 speed over, is it broken? HELP!
@NuvaTRX yeh, you can give this a try :
1. Press and Hold the M Button to enter the Settings menu
2. You need the first setting, which is Option 1, so you should see parameter 107 displayed now (in Kmh mode)
3. Now adjust the speed accuracy. e.g if Speedo displays 100Kmh but HUD displays 105Kmh then by default the algorithm should be 107-5=102 so simply change it to 102 or the required value that you need.
4. Press and Hold the M Button to Save your changes and Exit
Hey, couldnt find any comments on this, but mine only triggers past a certain speed (40mph) , was just wondering how to change that
@@Ostrovskymaksim-ir2pk What is the Year Make and Model of the car you have installed it on
@@SHORTwithTECH It's a bmw 330i 2003
@Ostrovskymaksim-ir2pk Nice car! I haven't heard of that problem before. Does your Speedo also have the same problem? If yes then suspect possible faulty wheel speed sensor. If no, have you tried doing a factory reset with the HUD ?
1. Press and Hold the M Button to enter the Settings menu
2. Choose Option 12, now you should see parameter value 0 displayed on the screen
3. Change the parameter value from 0 to 1
4. Press and Hold the M Button to Save your changes and Exit
Hope that helps you, keep the comments section updated on the result if you can
Possible to install it on a Honda Jazz 2009?
@imraniumb It should be fine but best to check with your supplier first to be 100% sure. If in doubt there is a GPS version available of the M3 aswell now which will have similar functionality to the M1 HUD ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=BokjtXBHUkAqOS5r
I’m in on a road in which the speed limit is 70 mph the beep sound is going to beep?
@@armora2 if you set it to beep at 70mph then yes
How do you change it’s from km/h to mph I couldn’t figure that out
@TreyBenson01 To change it from Kmh to Mph
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
@@SHORTwithTECHmine only goes to 6
@dylannichols4072 it sounds like you have the newer GPS version or you have the M1 model and not the M3. The GPS versions are different, try option 5 instead. It shows you how in my M1 video review here ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=mocMUhylOHWiv2zV
@@SHORTwithTECHthank you!!!
@@Brighterdays346 your welcome 🙂
Do you have to manually turn it on each time you start the car or will it automatically turn on when you start the car?
@@Justin-si8ib no you dont manually turn it on and off, it just automatically turns on and off with the car through the OBD2 port
How to order this ? Please send me a link, Thank you.
@TheAkshatkalra Hello, its the same link as in Video Description a.aliexpress.com/_ms0cUhW
It gave my jeep system park brake and air bag sensor error and check engine light on. As for the hud its working fine. How to fix this?
@primosebas8033 You will probably need a diagnostic scan tool to get rid of the errors but if that happened just from plugging it in then it could happen again. Don't plug in the device with the ignition turned on either, if that's what you did? Depending on the year of the vehicle, you could try disconnecting the negative battery terminal aswell for 60 seconds but no guarantee that will fix the errors. If your jeep is a 2010 or later,don't try doing that
It’s happens to me a while ago.. it gives so many error, maybe because I plugin the HUD OB2 while the ignition is on. What I did it remove all attached to my car and restart my app. All errors is gone, I will try to plugin again tomorrow while the ignition is off, Hopes nothing happens. 🤞🏼
@droitzer your 100% correct. Never ever plug anything into the OBD2 Socket with the ignition turned on. When the ignition is turned on this wakes up the Canbus. You will definitely get errors doing that and some won't be easy or cheap to get rid of.
@@SHORTwithTECH still the same.. even if I install it when car is off. It gives me error on my app. Any suggestions? My car is 2024 model
@@droitzer what type of car is it? A 2024 Make Model
What is the code to change the temperature measurement unit?
@melqui787 To change it from Celsius to Fahrenheit do this:
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 9
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Celsius and 1= Fahrenheit, hope that helps you
@@SHORTwithTECH Thank you very much. My car doesn't have a gauge, just a light, and I bought it to see what the temperatures are like.
@melqui787 yeh it's great for monitoring the temperature on cars without temperature guages, an HUD is a really useful device to have for many reasons
Will this work on a 2014 Ford Fiesta 1.0? Sorry, I'm still new to this whole thing.
I'm kind of hesitant to get one since I've been reading some comments saying they get errors on their cars once they connected it to their OBD2.
@blueberrymuffin2860 I've heard of problems with the Fords from others so cannot be certain. The GPS version will definitely work on your car and i can recommend it highly. The M3 GPS version will be very similar to the M1 GPS version which I reviewed a while back ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=Z20pcqvrMjhTpl3- hope that can help you out, all the best
@SHORTwithTECH I see, thank you for the reply. I'll look into it more and see if I'll be able to purchase the M3 model.
Just to clarify. As long as it's a GPS version, it'll work, right? Either models will work on the car, yeah?
@blueberrymuffin2860 yes, the GPS version is USB Powered so will work on anything, and they work really well just like the OBD2 version
@SHORTwithTECH I noticed in a video on your channel where you were comparing the M1 and M3.
The M1 or USB type has a 1 or 2 KM/H difference compared to the OBD2. Is that normal, or do I have to like set some calibrations on the device?
@blueberrymuffin2860 yes that is normal, you need to calibrate the device to match your particular speedometer in the settings of the device which you can do with the M1 and M3, but the M2 is not adjustable so for this reason i would recommend the M1 or M3 over the M2
Can you turn off the overspeed alarm?
Yes and No. You can't physically turn the overspeed alarm feature off, but you have two options to get around that problem. It can be set as high as 250Km so option 1 would be to set it to a higher speed or option 2 is just turn off the buzzer, there is a feature that just turns the buzzer off altogether. Hope that answers your question 🙂
@@SHORTwithTECHhow do you mute the alarm?
@Dtm.15 Hold down the (-) button for approximately 3 seconds to mute the alarm, and repeat the same again to unmute it when needed
Great video, i owned one and it works well, however i wonder what is 1 to 12 in menu setting, I’ve lost the instructions 😅
Thank you so much. Do you have Instagram? Your instruction manual is on my Instagram here: instagram/shortwithtech.official Hope that helps you 🙂
@@SHORTwithTECH Nice!!! Thank you
@ltnonehere your welcome
Hola que tal, me puedes ayudar en programar para que coincida la velocidad del tablero con el display? Para que sea la misma velocidad en los dos. Muchas gracias
Lo siento mucho. no entiendo tu pregunta. La velocidad del HUD ya está programada para coincidir con el velocímetro de su automóvil y es muy precisa. ¿Es eso lo que quieres decir?
Did it turn off with car or i need to turn off from the button ?
And did it support transmission temperature?
@2GE4EV Thank you for your comment, it turns on and off automatically with the ignition. No the transmission is not supported by any HUD, only the Engine is
una pregunta. el dispositivopuede encender automaticamente?
@HunkLiz the device is controlled off the ignition yes, thanks for your comment
Can you test the GPS version? M1 model
I will look into doing that. I am actually filming another review on another HUD at the moment which will be uploaded in a few weeks but that's OBD2 aswell. This HUD is a very simple basic device but it is GPS and it is good so might be what you need ua-cam.com/video/AOfrtXDzQQA/v-deo.htmlsi=B2lBpwh37HdB8E9p
Mine worked on the day i installed it. Left it overnight. Next day it shows 3 stripes "loading". Then displays "0.0" for a couple of seconds and then flashes all the leds and turns off without turning on. When driving it shows "1" for a second then turns off. What is this caused by?
@ikkelolnl sometimes strange things like that happen with electronic devices. Just do a factory reset and it should be back to normal
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 12
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
hope that helps you
@SHORTwithTECH i got it to turn on again but it will randomly display "0.0" and turn off. It will also just show "0" for speed. I got it yesterday and installed it and it worked fine. Now it doesn't anymore. I'm driving an audi tt mk1 2001, with obd2. It worked before and overnight it stopped working... bit weird. It also wont let me access settings anymore
@ikkelolnl Try this:
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 10
3. If the the default value you see is '0' then change it to 13.2
4. Press and Hold the M Button to Save your changes and Exit
If that doesn't work, check your obd2 port connections are clean
@SHORTwithTECH i've tried this and troubleshooted my obd2 which is fine as well. I might have gotten a faulty unit. I will try to test on another car tomorrow. Thanks for the help :)
@ikkelolnl if none of that worked then it can only be a compatability problem or a faulty device yeh, best of luck, hope you get it sorted out
Hello. I have a Mercedes E250 2013. I have the same HUD model. I tried several ways to adjust the speed, either it is correct at low speed and not at high speed, or vice versa. Please help me
@DanIva-vn7vn 1. Press and Hold the M Button to enter the Settings menu
2. You need the first setting, which is Option 1
3. Now adjust the speed accuracy. e.g if Speedo displays 100Kmh but HUD displays 105Kmh then by default the algorithm should be 105-2=103 so simply change it to what you need.
4. Press and Hold the M Button to Save your changes and Exit
Hope that helps you
@@SHORTwithTECH Thank you for all the insights. In my case however, the offset increases with increasing speed. For instance, at 80km/hr it shows 84, while at 120 it shows around 128-130. Is there a way to fix this dynamic offsetting? Thanks again :)
@tanmaymishra8187 that can be a problem with OBD2 HUD's with some cars, which unfortunately cannot be fixed. In this case a GPS version which is not controlled off the OBD2 port can be a little bit better but of course with less functionality, for example the M3 GPS or the M1 GPS ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=xm66F0sS1cv5MYRI It will still need to be speed calibrated though for some cars
Very late but does the speed limit thing also beep when your in a 70 or 80 zone? I assume so and if so is there any way to change beep sounds or set multiple with this? Again I assume no
You are 100% correct with your assumptions. Yes the speed alarm will beep at whatever speed you set it to. And no, you cannot setup multiple speed alarms or change the sound of the beeping but like you I wish you could because multiple speed alarms would be a great feature to have
@@SHORTwithTECH ok thanks im probably ghonna buy one i keep thinking about it
@ob1tovr yeh it's a great product. I will be uploading another HUD review in a few weeks so if your not urgent then maybe best to wait because the next HUD review is not one you will want to miss, im currently still testing it but it's a pretty amazing product
@@SHORTwithTECH ill wait then, im on my learners and i have 80 hrs atm and i wanna wait until im off my learners so i dont get to used to it then not when im doing my test
@ob1tovr it's worth the wait to be honest. What kind of car will you be installing it in?
i got exactly the same hud display, but after plugged in. it only says 0 km/h and not changing anything while driving, how can i adjust it? hope u can help
@adamchecho822 What is the Year, Make and Model of the car ?
@@SHORTwithTECH hi i have the same problem which i plug in it just stays 0km/h. my car modal is 2008 proton saga blm, is it compatible?
@isaacongjb9152 Hi, once plugged in do a factory reset with the device. I do not have any experience with Proton unfortunately so unsure of the protocol being used
I just bought makingtec m1. But when the package came it was m3.
Question, is it safe to leave it plugged in at the obd connection? Will it drain the battery? Tried it today and I also dont want to install the reflective film. For now i disconnected the connector. Scared of draining the battery. Btw using it on my nissan kicks sv 2024 model. Thanks
@noelurriquia8643 Hi, thanks for your comment. You just leave it plugged into the OBD Socket all the time. Yes it can drain the car battery but only if left plugged in for days at a time without the car being used, so if your leaving the car parked up for over a week without using it then I would recommend unplugging it, if the car is used regularly then you will never need to unplug it. It's designed to be permanently connected 24/7, hope that helps you
@SHORTwithTECH ok thank you. Got an upgrde. Was expecting only the m1 yesterday but when i unboxed it was m3. Thought i need to buy usb cable to mini usb. It won't void my car warranty right? 😅😅😅 that's why i was thinking to buy other cable than the included odb to mini usb cable.
@noelurriquia8643 no you don't want to replace the cable because OBD-USB=12 Volts where as USB-USB=5 Volts. Also you won't have most of the features anymore as they are controlled by the OBD Port only
@@SHORTwithTECH ok thanks then. Haha. Just new with car things, so literally i unplugged again in obd port for I will be working 8hrs. Scared of the battery drain. Haha. Later i will go to the mall for around 30-60 mins then by that time only i will try not to unplug. 😅
@noelurriquia8643 8 hours is nothing. You can leave it plugged in for days at a time, it won't drain your battery. On my VW I once left plugged in for 16-18 days without using the car at all, when I came back the car started up perfectly fine. You are over worrying about your battery, just leave it plugged in all day and all night over the entire weekend, your battery will be perfectly fine on Monday morning
Hi i have a quick question, Do i need to turn it on every time i start the car?
@@mhnbox Hi, no, it turns on and off with the ignition
Do you have a Manual for this device? would you send me a picture of it please, i lost mine.
@@xx8dSb8xx it is on my Instagram @shortwithtech.official
Great job.
Thank you
How do i change it to mph heeeeeellllp
@josebonilla4447 to change it from Kph to Mph
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
Can it install on Toyota Camry 2003?
@sreysopanha7626 if it's a US model 2003, that's right on the crossover change point so possibly not. However this M1 GPS HUD will work on that car no problem ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=_eINoA8gLD_bj2uT
If a car speedometer is in only MPH by default, would this hud show Kmh?
@sepehr1257 by default yes it would so you need to change it from Kmh to Mph
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
Hey so this version has automatic brightness?
Also why does the website say only gasoline cars?
My car is diesel so it wont work what?
Yes it does support auto brightness. I don't know why it says only gasoline cars on there website, I cannot guarantee it will work with your car, its best to ask the supplier first. One advantage of a GPS HUD over a OBD2 HUD is that it will work with all cars so something like this will work on diesels aswell ua-cam.com/video/AOfrtXDzQQA/v-deo.htmlsi=YkzFDQ0UFCmBr0tf
Hello I need help because when I’m trying to set the mode to speed but the speed is just saying 0km while I’m driving
What is the car you have it installed on?
@@SHORTwithTECH 2007 hummer h3
@suss_ryzeyt8031 Try unplugging device and reconnecting. You can also try a factory reset under Option 12. If that doesntvwork its possible it's not compatible withn that vehicle
I just bought it, will it drain my battery if I leave it plugged with the car off, and locked?
@juelxhetani3023 the OBD2 version can drain the battery but only if the car is left unused for a few weeks so only over a long period so its definitely nothing to be concerned about
@SHORTwithTECH tysm
Thanks for aweosme review, is it a lil blur in reality or its just in video? Also Does it have auto brightness, i mean does it get dim in night time?
Thanks man. No it's not blurry in reality, it's very clear in all lights although I do agree the video does make it look blurry, sorry about that. Yes it does have an auto photosensitivity mode or you can also adjust it manually with its 10 brightness settings
@@SHORTwithTECH thank you so much man! Thats a big help. Ordering mine right now.
@@shayk8037 your welcome
Can it be changed to mph?
@kenwoolner8606 HI, Yes mph and kph are both supported, hope that helps you
How do you change it to MPH?
To switch to MPH do this:
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
@@SHORTwithTECHyou legend
I went to option 8 and switched it to 1 and it still says kph. I even checked to see if the 1 stuck and it did
@colin5789 Try a Factory Reset first, to do that do this:
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 12
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
Now switch it to MPH again like this:
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
@@SHORTwithTECH thank you for the help, I’ll give it a shot!
In installed it on an EV without adjusting anything. The speed shows fine but the water temperature icon keeps on flashing. Does anyone knows why?
What year and model EV is it? Is the car battery voltage displayed correct? Does the temperature reading seem to be accurate? Have you cleared the fault codes through the HUD?
It is a 2022 model MG4. I only have readings for the car inside and outside temperatures, but cannot confirm the temperature of the motor. I have not adjusted any of the HUD settings, but left them as set by the manufacturer.
@edwardxuereb1222 is the car battery voltage displayed correct? Have you tried to do a factory reset?
i does not have water cooling so it does not show most likely
Do you mean hybrid was a gas/petrol engine or a straight EV?
Depending on the vehicle, there may not be a water temperature sensor... so it might pay to talk to the car dealer or local agent
Mine only give me 6 options and I can’t change it to mph
@dylannichols4072 it sounds like you have the newer GPS version or you have the M1 model and not the M3. The GPS versions are different, try option 5 instead. It shows you how in my M1 video review here ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=mocMUhylOHWiv2zV
Can the device switch to MPH?
@Chris2k33 To switch to MPH do this:
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
I got the same meter as you and found it lack the brightness a bit in daylight. Do you have the same issue?
Only in extreme bright light, most of the time it's perfect for me. You can try turning up the brightness level manually in Option 7
Happens to me a while ago, so many errors maybe because I plug in the OB2 while the ignition is on. What I did is I restart my mobile app and unplug everything in my car and it backs to normal. I’ll try again tomorrow plug-in the HUD OB2 while the car is off then let’s see if the problem will came back. Hope not..🤞🏼
The speed reading may be perfect, when compared to the car's speedometer, but bear in mind that the speedometer is probably a bit off.
Thank you for your comment
This is true but it’s better then gps as that can’t change with conditions like wind or tunnels, if you know how much your speedometer is off by then it’s fine
Do you have to turn it on/off every time you ues the car??
No, it turns itself on and off when you turn the ignition on and off
Спасибо за субтитры! Я переводил через гугл переводчик! Полезное видео
Thank you so much, glad you found the video useful 😀
Hello there! Thanks for the uploadt! Does it changes between displays automatically? If I wanna see the water temperature sometime do I need to press the buttons while driving? Is it in Celsius? Thanks!
Hi, no it doesn't change automatically, you need to push the button if your driving but when you stop and turn off the Ignition you can set it up to display the temperature for you automatically just before it shuts down. Yes its Celsius by default but it can be changed to fahrenheit in the settings, hope that helps you 🙂
@@SHORTwithTECH Yes that helped a lot. Thank you very much!
@@marcosdasilvacosta723 Glad I could help, have an amazing day 🙂
Is this compatible for all cars? I installed this on a Nissan Micra but it only displays zero value
It should be compatible with most cars, but not all cars no. What year Micra is it? it's petrol and not diesel right?
@@SHORTwithTECH Micra 2011, petrol engine
@@ramdhanid.4188 oh, 2011 is not an old model. I would expect that to work no problem. Is it just the speedometer feature that is not working? Do the battery and temperature features work? Does the cars original speedometer work?
@@SHORTwithTECH The original display is normal, no problem. Just display battery voltage
@ramdhanid.4188 I don't have alot of experience with Nissan unfortunately but i would expect all Micras from 2007 onwards to work with this device. Do you know how to read live data parameters through your OBD2 port? If you can successfully read the parameters then the problem is with your HUD so open it up and check for poor soldering or bad connections is what i would do. If you cannot read parameters then it means a 2011 Micra is not compatible with this device which is surprising to hear
Can this speed beep be removed?
Hi, yes it can, you need to do this:
Press and Hold the (-) Button for a few seconds to turn the buzzer Off. To Turn the buzzer back on again repeat the same procedure.
Hope that helps you out
@@SHORTwithTECH TK brother!
I’ve plugged it into my car, however it’ll read the battery voltage but not my car speed. It remains at 0km although I’m driving. It’s a 2008 allion Toyota vehicle. Any advice?
Does it read the temperature?
@@SHORTwithTECH that’s also at 0
@dejavuprince193 ok so this means that it is not communicating with the obd2 port of your car. It powers up fine though so it's either faulty or not compatible with your car. Is this a US version?
@@SHORTwithTECH no Japanese made
@dejavuprince193 if you have a obd2 code reader you can plug it in just to test your obd2 connector is functioning correctly
How do I change from km to mph
To switch to MPH do this:
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
Can I leave it plugged in the car without driving it fow a couple of weeks? Worried about battery drainage
That's not recommended but I personally have done that myself and have never had my battery drain
@@SHORTwithTECHdrain battery that bad?!
@wenwang9049 no, I have never had my battery drain
@@SHORTwithTECH why is it not recommended?
@user-hm3vg5mc4x just like any product you connect to a cars battery, eventually it will drain the battery. Its just a warning from the manufacturer, you dont need to be concerned about it
Is there a way to switch to mph?
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
Mine stopped working after a year. Now it tried to start up, but ends up just faintly and really fast blinking the temperature and a small -.
Is it dead?
@Henrque123 Sorry to hear that. If you are able to bench test it and test the cable I would recommend trying that first, if none of that is successful the device may need to be replaced from what you are describing
@@SHORTwithTECH Cable was fine, I'm ordering a new one. Which one do you recommend after testing them? I'm looking at the M8
@Henrque123 it all depends on the type of HUD you want. I have not experienced any problems with the M3 but sometimes you get faulty products. If you want OBD2, I personally like the Konnwei KW206 ua-cam.com/video/OC91Q_kV7sg/v-deo.htmlsi=ygdU5Tq6Y6xzOTIn If you want GPS i am a big fan of the M1 ua-cam.com/video/niFv0fHEVyk/v-deo.htmlsi=XgG80qecyUEralR5 I personally would rate those 2 over all the others on my channel so far. There is another HUD review coming out in a few days which is also good but i don't think it will be for everyone
at 7:55 you were going 70 and it was displaying 56?
It looks like that from that camera angle of the speedometer, it is 100% perfectly accurate in my VW
@@SHORTwithTECH ohh okay thank you so much for the reply. I was just curious that's all. Thank you! Just curious are most OBD2 speedometers accurate like this? Cause I got a GPS one and it is way off and delayed
@australianllama3114 sorry, i'm unsure of other devices, this is the only HUD i have reviewed so far and I can definitely recommend it. Have a great day
Is it suitable for toyota innova, mate?
Sorry I'm not 100% sure. If it's a late model I'm guessing it should be ok. So far from what my viewers have told me, Nissan has been a problem, Mazda was fine and VW but no one has mentioned Toyota. The supplier will be able to confirm that for you though, contact them through this link, best of luck, please keep us all updated incase others are trying to install it on that same car
a.aliexpress.com/_m0XqjQi
Thank you, Would this work on Dodge aveger 2011? Also, i did not see a link to the product. Is it available on Amazon?
It should work on a 2011. Best to check with the supplier to confirm that year first though. Here is the link a.aliexpress.com/_mKqrZFM. Hope that helps you, have a great day
@@SHORTwithTECHthe link doesn’t work anymore is there a new one?
@gxmy you can do a search on aliexpress.com for M3 OBD2 HUD and you will find lots of suppliers selling these
@@SHORTwithTECH yes, I am thinking that on Alibarber there are other factories making 'knock-offs'.....many different outfits are selling them....... might explain why some peoples 'M3" seem to work differently or not work.
How do i buy it?
@mrdexb313 you can buy it from aliexpress.com There is now a new updated version available
Can we change km to miles¿
Yes you can, you need to do this:
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
Why didn’t you use this video to show how to calibrate the device?
@rogergant5502 device is plug and play, no calibration was required at all when reviewing this device
Mine was advertised as GPS but can’t see anything about that on the instructions 😊
No this one is not GPS
@@SHORTwithTECH Car HUD Head Up Display OBD2/GPS Overspeed Warning System Projector Windshield
@@Youremywifenkwdave HI, the link to this device is here
a.aliexpress.com/_ms2nQ9M
It is not GPS, thanks
Can km/h be changed to mp/h?
Yes, you can change kph to mph in the settings
how do you switch to MPH mine only gives kmh
To switch to MPH you need to do this:
1. Press and Hold the M Button to enter the Settings menu
2. Now your In the settings menu choose Option 8
3. Change Parameter value from the default value which is '0' to '1'
4. Press and Hold the M Button to Save your changes and Exit
0=Kph and 1= Mph, hope that helps you
On mine, it's option 9
@purelaffs yes, that's strange. Your not the first person who has said that. The manufacturer must have changed the software at some stage
Name of the gadget
@@Funnycats99club it's called a Head Up Display
That overspeed alarm would get annoying very quickly.
Thank you for your comment
Is the speed accurate?
On my volkswagen it's absolutely perfect yes but other cars may be different
Where did you get this from do you have a link?
Yes sure, here you go: a.aliexpress.com/_mK1lYuu
@@SHORTwithTECHMine arrived and everything fine. However seems very inaccurate
@morganmcguinness9923 that's interesting because mine is perfectly accurate. Are you referring to the speed accuracy? What type of car did you install it to?
@@SHORTwithTECH speed accuracy yes in mph. Ford Mustang
@@morganmcguinness9923 how inaccurate is it?
Link to product please?
Sure, here you go a.aliexpress.com/_mO9tYs8
Not trying to rain in your parade, I think these devices are great, but I am concerned about they being plugged and pulling the data constantly from the ECU...the "brain" of the car so to speak...this could burn the electronic unit? the obd2 port is not made for continuous data pulling after all... just wondering if it's safe to use all the time.
Your Gateway will not burn out, the OBD2 Port is just a communication port. If this concerns you there is always a GPS HUD which doesn't connect to your car at all and works just aswell but with limited functionality compared to OBD2 of course, for example, like this one ua-cam.com/video/AOfrtXDzQQA/v-deo.htmlsi=CKTHDs4_ddCbQSUR
Can you mute it?
I don’t want it to beep
Hold down the (-) button for approximately 3 seconds to mute the alarm, and repeat the same again to unmute it when needed
@officialcrazydonut6856 Hold down the (-) button for approximately 3 seconds to mute the alarm, and repeat the same again to unmute it when needed
You had to remove a lot of trim … what she said 😂😂😂😂
Yeh, making the installation look as tidy as possible requires extra work
Чего это Вы, всю машину разобрали?😅
Yeh routing wires inside the car can be so much fun 😀