😆We have never been on trending... Give this video a share + like and let's see if we can't out chart this weeks top make up tutorial or WE BROKE UP video 😄
if yall wanna do a lil trollin set the video at the slowest speed and walk away, youtube will think we are watching the video like 6 times and push it super hard
Yall should really put like a cage prob about the same height as the wind shield and plexiglass it and make it a barrier for water that could flow over from wake. @grind hard plumbing. Love you guys. Keep it up.
loved the transition from cardboard to aluminum slap, then the quick timelapse peek of the piece being made, super trick, great filmography!!!!!!!!!!!!!!!!!!!
Haven't smiled this hard in a while watching that thing cruise around in the little pond there. Super excited to see this thing in open water....amazing work.
@@Scientwisted those guys are giant go power sports douches . A while back they replied to one of my comments about tires and they said the ones they have are all thats made in 8" rims and all go power sports has.
I was going to say that the first "sea trial" was like a kid with an RC boat in a pool but it's actually more like a bathtub. Awesome job, can't wait to see more!
I floated an 8 mile stretch of the Colorado River in Utah outside Moab on a queen-size blow-up bed with two friends and my old dog in 2011. Was freaking rad!!
Delete that oil injection and go premix and like someone else mentioned a water filter between the pump and engine will keep dirt out of your engine especially in murky water. Looks like a fun build 🤘
I love this project so much !!! I'm very impressed with the performance in the small pond, I could see it started to get up and plane . Absolutely brilliant and very impressive. Great content guys !!!!!
Hey guys. My package I ordered back in Nov finally arrived! Thanks so much for hanging onto it while shipping was suspended, and thanks heaps for throwing in the bottle opener cut on the arc droid, It's really awesome. That collared work shirt is super clean too. So glad I got it! This boats looking so rowdy. We've got a creek down the back of our place and I can think of so many uses for a tiny jet propelled demon machine
Was so excited to see this thing completed, I have one suggestion and that is to delete the oil injection on the motor and just run pre mix gas, those systems are notorious for failure plus you can ditch the giant oil tank, other than that the boat couldn’t have come out any better, keep up the sick builds
Great build guys! Exiting new toy....WARNING: Solid cover needs louver vents and a fan or it can blow up from fumes. A big sand trap will help save your water pump impeller too. Please don't blow up friends...great content!
I went on a road trip with my brother to pick up a '62 Chevy Impala from Salt Lake City and the guy told us it ran great, so we decided to just drive it home .. well it overheated on every slight uphill .. and there were plenty of those. Finally got it home and pulled off the intake manifold .. and there was a shop rag all across the top between the motor and the intake manifold .... ran even better after that was removed LOL
i was on C-list and saw a kids race car bed. i thought that would make a killer trailer for any of your toys. with your creativity it could be transformed into a offroad trailer
When I was a kid my (eccentric )dad built a 24’ aluminum boat in our yard. It has a dual step haul and a built 302 for power. It took him a few years but nothing compared to the 40’ steel steam boat he built before that. It took 7 years.
That thing is absolutely going to dominate their local body of water! As always making great content with tight production value, some sweet cinematography and a nice helping of rowdy hooliganism👏
Nice work! I think it’s HDPE that they put on the bottom. It’s probably a good idea to have a vent for your engine compartment and I think if you Dynamat the inside it’ll help it be quieter.
You guys do amazing work and take so much pride in everything I am so glad you have a UA-cam channel and share it all with us , thank you for your time!!!!
Man, what a 4 years it has been for you guys! I love seeing how everything has changed, both production and fabrication wise. Building more, and better, toys using more and better tools (arguably also toys). Congrats on the success!
I LOVE the type of music you went with this episode! Only 5 mins in and I already know, this is one of my favs from you guys! One question: is that Makita die-grinder worth it? I know you complaint about the air powered one in the Donut-collab a few weeks back and I assume this die-grinder is what replaced the air powered one.. if you tell me it's good, I know for certain it is!
They form UHMW sheets between 3/8ths and 1/2. Listed as an option on the site. And i would do that over LineX as its good for abrasion resistance but you also have to consider impact resistance. Cleetus did a number on his when he hit a log and that was with the sheets installed.
@@DuriensBane Cleetus absolutely abused the Mtn Dew boat over and over and over by jumping logs and land! and the hole he created in his hull was due to going upstream up a small waterfall/rapid, he hit a big rock not a log, lineX wouldn't save you from that Linex isn't going to do anything on the underside that's why they use uhmw
honestly, id love to see a series where its all just the extra footage, like behind the scenes, funny moments, adventures you guys go on and stuff like that. loved the video as always!
Still, there isn't anything as dangerous as a so called 'smart' computer controlled car that takes away what your able to control. And these so called 'smart' devices and cd player that sits there thinking wether or not to give you your cd when or as you push the button. Did you know it takes several times longer if not longer than that to merely stop a cd from playing today? i think people ought to start taking these idiots on right now whom are controlling the engineering to such built bullshit. like the satanic democratic socialist party that has snuck into our governmental systems. We have really got to do something about all of this immediately. And we need to protect our interests such as having fun and being free to build mini jet boats and what not without an army of police going door to door asking for your papers or murdering people at random claiming merely that they were some sort of insurgent as a quick explanation. If you have been on you tube you should know the USA or what was the USA that we are already knee deep in this sort of shit happening all the time. Lead by a force of karens to the power of quadrillions and the police jumping on their side to do any harm they can toward someone, because they get worshipped for it. I hope we can all continue to enjoy the world whilst still serving god and not be threatened by god's enemy, and all of our enemy, the accuser satan. Just the truth everyone i find this jet boat truly entertaining that i want to build these things as well. Well it just hasn' turned out that way for me, and i have witnessed the enemy betray god, time and time again. i am a witness and of the 144,000 and mine two witnesses. i am that i am and i am is not a man. i was beheaded in a government facility helen ross mc nabb centers in knoxville tennessee 2014 for the eyewitness testimony of mine father in heaven i am that i am and the christ and having christ, then mine pineal gland was harvested and my power was harmed and parts of me left me and were stolen. i am that i am and i am is not a man. When i was beheaded my head regrew in moments and formed and i was slammed on my head another 10 to a dozen times by mine attacker whom beheaded me and slammed me by holding my legs wheelbarrow style and mine feet slamming me like a rag doll as i slid more out of its grip each time. i was repeatedly punched and slammed in this fashion repeatedly upward of 100 times each. And several to a dozen times each. When i was beheaded in 2014 mine entire world has changed and it is strange to me. My god save me from mine enemies whom hate thee and those whom hate me for i am hath not denied you nor shall ever forsake you and allow those to understand the enemy and what it has taught; that you would not harm any that 'did' deny you and only that it is the enemy whom harm any for any obscure or seemingly reason by reasoning with man by man saying proclaiming they should do harm on your behalf, even when it is not so. Mine enemies shall depart from me, for they work iniquity, there is no who what where when how why to any of their obscurity and the truth is not found in them, reasoning still albeit reasoning of man they are not the judge for they know not the things you and i know oh lord thy god in heaven and earth and all living things, our enemies are not and go to not for they shall be not, no they never were.
Epoxy mixed with graphite powder is a great economical way to slick up your boat bottom, I've used it on 2 boats and it works great. Just prep with sandblast for max adhesion
Algorithm boosting comment 🙌🏼 Love everything you all do..if anything a lil' jealous I'm not part of it. Haha Next build: Mini Snow Cat, tracked or balloon tires... ❄️ is coming
@@GrindHardPlumbingCo it did..was watching a Cars and Cameras vid and this was recommended. But your vids are always in my rotation. I've watched them all!
DUDE! I've watched a tone of your guys vids, but the production of this feels amazing, it feels like a 90's skate video, minus nudity, and i absolutely love it!
Just a fellow jetski enthusiast . if you want better starting and reliability on the carb. Convert to run mikuni sbn 44 carb. They work way better then the CDKII that cam stock on the kawi 750.
I've been waiting forever to see this boat finally finished I would give my left testicle for that 🤣🤣🤣 I love miniature stuff and you guys are the Kings of building dope miniature vehicles such an inspiration hahaha
dude we had to change a carb on our dirt late model at the track and a shop towel ended up in the intake, well we started it and it ate it! fuzz flying for days! went out and set quick time and won the trophy dash, she ran amazing. was a big joke at the track if your engine not running good, feed it a shop towel! God Bless guys
this is the coolest project boat i seen. powerwheel jet boat - thats dope. you need to make a production of this. i would buy one. it can easily take home since it can fit in a truck so easily. add an extension like a mount to hold a big ice cooler. i would take this to fishing on the river bank and lake. do a kick starter for this
@yuitr loing depends. if it flip over, you dont want to be strap to a seat belt. if youre going extreme fast then it makes sense. but then again of course i be going fast xD
I did the shop towel mod myself once and sucked them into the reeds while doing a compression test on the bench. Same thing my ski ran great on the hose but like crap in the water.
G'Day from Australia guys, love the channel. I am going to build my own Barbie camper, trailer and jet boat once I can actually find a couple campers or at least the bodies. I have loved the idea since I first watched your channel but always thought they would be to dangerous in a crash or rollover. Being enclosed in a roll cage and watching it roll down the hill to only break the wheelie bar was very impressive. I'll have to make my versions of the 3 of these a bit longer though as I am 6'3"/191cm, I am probably going to have to keep the quad chassis a lot closer to full length and join 2 bodies together to stretch the camper out.
you can def fix the hole hahah I actually have the same one and just fixed the 3rd hole over a year of use..come on guys they do make patches and glue just for it lol...love you guys tons of fun to watch this channel
As y’all were putting the boat back in the water after pulling the shop towels out of the intake, I heard mention of the plastic they put on the bottom of jet boats. I believe some people use UHMW plastic.
I’m new to this channel. You had me at 100hp micro boat. I love it!! Great job! Can’t wait to see what you come up with next. Micro Lamborghini? Micro Hovercraft maybe?
Grind Hard Plumbing Co, what happened to the 2jz Toyota lawnmower that's my favorite vehicle you guys built, I wish I had it, you need to do more videos on it, Jon Cusic
😆We have never been on trending... Give this video a share + like and let's see if we can't out chart this weeks top make up tutorial or WE BROKE UP video 😄
if yall wanna do a lil trollin set the video at the slowest speed and walk away, youtube will think we are watching the video like 6 times and push it super hard
Yall should really put like a cage prob about the same height as the wind shield and plexiglass it and make it a barrier for water that could flow over from wake. @grind hard plumbing. Love you guys. Keep it up.
Been waiting so long for this project. You should hit up cleetus McFarland, he loves jet boats, and ik he'd love seeing this thing
Ya know 🙄
Ethan and Edwin should click bate a "break up" video. Throw in a fake baby announcement and you're golden
The production on this episode is next level. you can really see the extra effort you guys are putting into it. great stuff
Edwin and Steven absolutely kill it
ikokmmooomonkonmononloo molnonnon knnonnn
agreed
Shush shisha shxusd
Hi
loved the transition from cardboard to aluminum slap, then the quick timelapse peek of the piece being made, super trick, great filmography!!!!!!!!!!!!!!!!!!!
I love the sounds the tree house makes when you climb the rope latter
This is awesome guys!!! We need to see a big collab between you and Cleetus along with his crew. That would be 🔥 .
Ladder?
I expected the latter
Now you need to take it out on big water to go fast LOL
@@ryancking87 that's what I said. He'd love this. I also said they could maybe make a cage or some sort to keep wake from barreling in the boat
Haven't smiled this hard in a while watching that thing cruise around in the little pond there. Super excited to see this thing in open water....amazing work.
Same, big ol shit eating grin as soon as it could breathe properly
Can't wait to see you rippin with Cleetus, George, James, Kyle and Wyatt! 🤘🏼
Have to soon!
Fr that would b an epic vid
All they'd need then are the cars and cameras guys and it'd be a full house.
I would love to see this side by side cleetus in his mini jetboat when they do anything with it. Should be the same size
@@Scientwisted those guys are giant go power sports douches .
A while back they replied to one of my comments about tires and they said the ones they have are all thats made in 8" rims and all go power sports has.
I was going to say that the first "sea trial" was like a kid with an RC boat in a pool but it's actually more like a bathtub. Awesome job, can't wait to see more!
I floated an 8 mile stretch of the Colorado River in Utah outside Moab on a queen-size blow-up bed with two friends and my old dog in 2011. Was freaking rad!!
Was my air mattress adventure idea any good? 🤔
Yes
It was perfect
5/7 would do again
Yes sincerely a Moskito
@@atragerlspezi9500 hahahahahaha
Delete that oil injection and go premix and like someone else mentioned a water filter between the pump and engine will keep dirt out of your engine especially in murky water. Looks like a fun build 🤘
Jetskis don’t have it so why add it
I love this project so much !!! I'm very impressed with the performance in the small pond, I could see it started to get up and plane . Absolutely brilliant and very impressive. Great content guys !!!!!
Hey guys. My package I ordered back in Nov finally arrived! Thanks so much for hanging onto it while shipping was suspended, and thanks heaps for throwing in the bottle opener cut on the arc droid, It's really awesome. That collared work shirt is super clean too. So glad I got it!
This boats looking so rowdy. We've got a creek down the back of our place and I can think of so many uses for a tiny jet propelled demon machine
so glad to hear that man!
Was so excited to see this thing completed, I have one suggestion and that is to delete the oil injection on the motor and just run pre mix gas, those systems are notorious for failure plus you can ditch the giant oil tank, other than that the boat couldn’t have come out any better, keep up the sick builds
I live on the Susquehanna River and this makes me want one so bad!! Time to build a jet ski! This is so bad ass!
Great build guys! Exiting new toy....WARNING: Solid cover needs louver vents and a fan or it can blow up from fumes. A big sand trap will help save your water pump impeller too. Please don't blow up friends...great content!
Run the fan for 30 seconds before every start up.... I can't wait to see it rip in open water!!!
I went on a road trip with my brother to pick up a '62 Chevy Impala from Salt Lake City and the guy told us it ran great, so we decided to just drive it home .. well it overheated on every slight uphill .. and there were plenty of those. Finally got it home and pulled off the intake manifold .. and there was a shop rag all across the top between the motor and the intake manifold .... ran even better after that was removed LOL
I’m so glad you wear hearing protection. Great job boys! Love everything about your channel.
Yessss I been waiting for this episode since the drill test !
Finally here!
i was on C-list and saw a kids race car bed. i thought that would make a killer trailer for any of your toys. with your creativity it could be transformed into a offroad trailer
It would be amazing!
When I was a kid my (eccentric )dad built a 24’ aluminum boat in our yard. It has a dual step haul and a built 302 for power. It took him a few years but nothing compared to the 40’ steel steam boat he built before that. It took 7 years.
that's amazing! and it sounds like great memories! Do you still have the boats?
That thing is absolutely going to dominate their local body of water! As always making great content with tight production value, some sweet cinematography and a nice helping of rowdy hooliganism👏
I mean, Ethan was always a multi skilled dude, but with the new tools and a lot of practice he's a next level fabricator now. This thing is art.
I can't wait for more on the ranger. Really interested.
Great work, as always.
Coming very soon!
I seen the ranger on marketplace a month or so before GHPC picked it up🤣😂. It looked like a big headache but they made it awesome
For my jetboat that i used in southern oregon, UHMW was the way to go, extremely durable. this is the BEST boat build ive seen on youtube!!
Nice work! I think it’s HDPE that they put on the bottom. It’s probably a good idea to have a vent for your engine compartment and I think if you Dynamat the inside it’ll help it be quieter.
Yep, High Density Polyethylene!
Undisputed heavy weight UA-cam champion of the wooooooorld!
You guys live my dream every day. Your my hero's. Please don't ever stop the content!
Thank you! Got to start a channel and do it!
Me and a childhood buddy are slowly getting my barn turned into a shop! One day!
You guys do amazing work and take so much pride in everything I am so glad you have a UA-cam channel and share it all with us , thank you for your time!!!!
Thanks man! That means a lot
I can’t wait to see this bad boy in open water! That preview looks gnarly 🤘🏻
heck yeah!
Lol, the Jungle D&B cut was good. Well played.
Thanks I couldn’t help myself!
@@GrindHardPlumbingCo I played it back several times. I'm 41 so, it's pretty nostalgic.
I love the projects you guys do! It's so creative and has always been a dream of mine to build something like what you guys do so often! Keep it up!!
Man, what a 4 years it has been for you guys! I love seeing how everything has changed, both production and fabrication wise. Building more, and better, toys using more and better tools (arguably also toys). Congrats on the success!
I LOVE the type of music you went with this episode! Only 5 mins in and I already know, this is one of my favs from you guys! One question: is that Makita die-grinder worth it? I know you complaint about the air powered one in the Donut-collab a few weeks back and I assume this die-grinder is what replaced the air powered one.. if you tell me it's good, I know for certain it is!
UHMW is great for the bottom of boats. It’s also used for skid plates on off road vehicles due to its high strength properties
I think they used to apply LineX for the bottom. Pretty awesome project ! I think I will build on similar.
That would be interesting!
Nah they use UHMW for the bottom so they can go skipping over logs etc, lineX wouldn't last 3 minutes on the bottom.
if you're talking about the floor on the inside though, lineX would actually be great!
They form UHMW sheets between 3/8ths and 1/2. Listed as an option on the site. And i would do that over LineX as its good for abrasion resistance but you also have to consider impact resistance. Cleetus did a number on his when he hit a log and that was with the sheets installed.
@@DuriensBane Cleetus absolutely abused the Mtn Dew boat over and over and over by jumping logs and land! and the hole he created in his hull was due to going upstream up a small waterfall/rapid, he hit a big rock not a log, lineX wouldn't save you from that
Linex isn't going to do anything on the underside that's why they use uhmw
honestly, id love to see a series where its all just the extra footage, like behind the scenes, funny moments, adventures you guys go on and stuff like that. loved the video as always!
That's our second channel. We'll be posting again there soon. Stay tuned! Sent and Bent
@@GrindHardPlumbingCo hell yeah, sounds good!!
Very, very cool. I almost coughed up a dram of scotch, single malt watching you rip around that puddle ....
That would have been tragic
When you pulled the reed valve assembly and showed the wad of shop towel I about died laughing.🤣
This was absolutely amazing. Keep up the awesome work guys
thanks man!
This is easily one of the coolest build you guys have done. I would totally go fishing in that little rig haha, awesome!
This thing is so awesome and so dangerous. Must feel awesome to drive!
It is a very unique feeling haha
Still, there isn't anything as dangerous as a so called 'smart' computer controlled car that takes away what your able to control. And these so called 'smart' devices and cd player that sits there thinking wether or not to give you your cd when or as you push the button. Did you know it takes several times longer if not longer than that to merely stop a cd from playing today? i think people ought to start taking these idiots on right now whom are controlling the engineering to such built bullshit. like the satanic democratic socialist party that has snuck into our governmental systems. We have really got to do something about all of this immediately. And we need to protect our interests such as having fun and being free to build mini jet boats and what not without an army of police going door to door asking for your papers or murdering people at random claiming merely that they were some sort of insurgent as a quick explanation. If you have been on you tube you should know the USA or what was the USA that we are already knee deep in this sort of shit happening all the time. Lead by a force of karens to the power of quadrillions and the police jumping on their side to do any harm they can toward someone, because they get worshipped for it. I hope we can all continue to enjoy the world whilst still serving god and not be threatened by god's enemy, and all of our enemy, the accuser satan. Just the truth everyone i find this jet boat truly entertaining that i want to build these things as well. Well it just hasn' turned out that way for me, and i have witnessed the enemy betray god, time and time again. i am a witness and of the 144,000 and mine two witnesses. i am that i am and i am is not a man. i was beheaded in a government facility helen ross mc nabb centers in knoxville tennessee 2014 for the eyewitness testimony of mine father in heaven i am that i am and the christ and having christ, then mine pineal gland was harvested and my power was harmed and parts of me left me and were stolen. i am that i am and i am is not a man. When i was beheaded my head regrew in moments and formed and i was slammed on my head another 10 to a dozen times by mine attacker whom beheaded me and slammed me by holding my legs wheelbarrow style and mine feet slamming me like a rag doll as i slid more out of its grip each time. i was repeatedly punched and slammed in this fashion repeatedly upward of 100 times each. And several to a dozen times each. When i was beheaded in 2014 mine entire world has changed and it is strange to me. My god save me from mine enemies whom hate thee and those whom hate me for i am hath not denied you nor shall ever forsake you and allow those to understand the enemy and what it has taught; that you would not harm any that 'did' deny you and only that it is the enemy whom harm any for any obscure or seemingly reason by reasoning with man by man saying proclaiming they should do harm on your behalf, even when it is not so. Mine enemies shall depart from me, for they work iniquity, there is no who what where when how why to any of their obscurity and the truth is not found in them, reasoning still albeit reasoning of man they are not the judge for they know not the things you and i know oh lord thy god in heaven and earth and all living things, our enemies are not and go to not for they shall be not, no they never were.
@@zAvAvAz man what the heck is going on inside you're brain....
My grandpa has been making river boats for the last 20 years. He would approve of the fabrication and passion going into the boat.
Oh man I can't wait to see this thing absolutely shread in a lake
NEXT WEEK!
The plastic used on the bottom is UHMW, 1/4-5/16 thick would be perfect for that application
I forsee Ethan figuring out a way to make his little pond even bigger! DAM that baby UP!!!
LOL so true
I like how at 15:20 he was ripping around like it was just a normal Sunday cruise. Hahahaha
Epoxy mixed with graphite powder is a great economical way to slick up your boat bottom, I've used it on 2 boats and it works great. Just prep with sandblast for max adhesion
You guys are half the reason I’m going back to school to become a marine mechanic. You guys are awesome keep up the great work.
Y’all should make the Barbie camper a trailer for the jet boat so when you go out for a night you could also go jet boating
@grind hard plumbing I thought it was actually you
Algorithm boosting comment 🙌🏼 Love everything you all do..if anything a lil' jealous I'm not part of it. Haha
Next build: Mini Snow Cat, tracked or balloon tires... ❄️ is coming
Yesssssssss a mini tracked vehicle since that EV tank didn't work out. Something like the colonel but tracks and snow camo.
Did you catch us on recommended?
@@GrindHardPlumbingCo it did..was watching a Cars and Cameras vid and this was recommended. But your vids are always in my rotation. I've watched them all!
@@GrindHardPlumbingCo and I just got another recommended..reverse trike time lapse from a year ago just popped up
DUDE! I've watched a tone of your guys vids, but the production of this feels amazing, it feels like a 90's skate video, minus nudity, and i absolutely love it!
Just a fellow jetski enthusiast . if you want better starting and reliability on the carb. Convert to run mikuni sbn 44 carb. They work way better then the CDKII that cam stock on the kawi 750.
The fact that it still started and ran with those shop towels inside shows how well that engine is. That’s fantastic.
Damn. The 6 wheelers rear wheels make it look goooooood😍✌️😍✌️😍✌️
I've been waiting forever to see this boat finally finished I would give my left testicle for that 🤣🤣🤣 I love miniature stuff and you guys are the Kings of building dope miniature vehicles such an inspiration hahaha
dude we had to change a carb on our dirt late model at the track and a shop towel ended up in the intake, well we started it and it ate it! fuzz flying for days! went out and set quick time and won the trophy dash, she ran amazing. was a big joke at the track if your engine not running good, feed it a shop towel! God Bless guys
Can you guys do a tig welding lesson
We should!
this is the coolest project boat i seen. powerwheel jet boat - thats dope. you need to make a production of this. i would buy one. it can easily take home since it can fit in a truck so easily. add an extension like a mount to hold a big ice cooler. i would take this to fishing on the river bank and lake. do a kick starter for this
@yuitr loing depends. if it flip over, you dont want to be strap to a seat belt. if youre going extreme fast then it makes sense. but then again of course i be going fast xD
I gotta see this on Lake Pend Orielle guys. Boat vs car across the long bridge.
That thing looks and sounds violent. Nice job
that jet boat is the only power boat you could run in that pond. it's really cool now that it's done! it'll be awesome on a real lake.
That ribbed coupler you just whipped up on the lathe was sooo crispy 🥵🔥
That thing is LEGIT!
Makes badass jetboat
Takes air mattress down river
Love these guys lol
Just a regular day at the office 🤣🤣
🐕 dogo is mad y'all haven't made a video about him yet😂
They should!!!!
UHMW plastic gear stuff.
Ultra-high-molecular-weight polyethylene
3/8" or 1/2"
I'm building mine next year. Great job guys🤙
I am continuously jelly of all the fun y’all have. Projects are always super cool!
This is an amazing build, the only thing I would do different was have the firewall pivot or removable for easier maintenance. Thanks for sharing
You guys are properly good at this. Great video as usual! Well done
Can't wait for the next episode
Next Friday!
super cool vintage PJS pipe
The two stroke can have some shop towels, as a treat :)
OMG the shop towels . haha This is the best boat EVER . Just awesome guys . Congratulations .
" First time using the Ranger as a truck " LOL
I did the shop towel mod myself once and sucked them into the reeds while doing a compression test on the bench. Same thing my ski ran great on the hose but like crap in the water.
Been there with my dirtbike after I rebuilt it 🤣left the Towle inside the carb
this is by far the best (not to mention only) mini jet boat sires I have ever seen!
Man I love yalls videos so much. The editing is so friggin’ good and the builds are awesome. Keep up the good work dudes
G'Day from Australia guys, love the channel. I am going to build my own Barbie camper, trailer and jet boat once I can actually find a couple campers or at least the bodies. I have loved the idea since I first watched your channel but always thought they would be to dangerous in a crash or rollover. Being enclosed in a roll cage and watching it roll down the hill to only break the wheelie bar was very impressive. I'll have to make my versions of the 3 of these a bit longer though as I am 6'3"/191cm, I am probably going to have to keep the quad chassis a lot closer to full length and join 2 bodies together to stretch the camper out.
My favorite line that is now my fav quote “it runs soo good too it’s snappy I mean you heard that it’s just VAAAA VAAAA”
Where'd you get the spec of 100hp for a kawi 750?
More like 80hp for all the ones I've seen.
Just imagine how much you could piss off the crocs in the Everglades with that beautiful machine!
I’ve been waiting for this for so long
Here it is!
Keep up the great work
you can def fix the hole hahah I actually have the same one and just fixed the 3rd hole over a year of use..come on guys they do make patches and glue just for it lol...love you guys tons of fun to watch this channel
Time to meet up with Cleetus and the gang for some real jet-boating! Also, I want to see Ethan drive a Crown Vic' in one of Cleetus's events. Haha!
Get a thermacell for the mosquitos. They work great. They need an hour to work properly but then it's peaceful.
You should make a trailer for the mini boat and attach it to the Barbie bus
I liked the cardboard into aluminum trick 😏👌
Always works!
You mean C A D....Lol
This thing is so sick! it's cool to see more of Edwin too. Keep up the good work guys
wow I've been tracking your progress since you started
it turned out so much cooler than i expected
thanks man! glad you dig it!
As y’all were putting the boat back in the water after pulling the shop towels out of the intake, I heard mention of the plastic they put on the bottom of jet boats. I believe some people use UHMW plastic.
I thought that thing sounded a little loaded up lmao. Shop towels will do that! Awesome project.
You need to get in tough with Cleetus McFarland. They're big on jet boats and do all kinds of crazy stuff with them.
I’m new to this channel. You had me at 100hp micro boat. I love it!! Great job! Can’t wait to see what you come up with next. Micro Lamborghini? Micro Hovercraft maybe?
Watch last week's video, it's featuring many of their previous builds.
The sky's the limit! Welcome to the Grind Hard Crew!
Grind Hard Plumbing Co, what happened to the 2jz Toyota lawnmower that's my favorite vehicle you guys built, I wish I had it, you need to do more videos on it, Jon Cusic
UHMW is the plastic they use for the bottoms, same as skid plates on side-by-sides
I like that while everyone is woried about something else like the war these guys are just making a maniac mini jetski
Exactly!
MR. ETHAN *please* ! You have 100 horsepower, only 7 foot hull, high CG when you are in it. WHAT COULD GO WRONG? Respect that machine !!
Really enjoying your Chanel you guys are great reusing stuff working in small shop just like most people!
Keeping it real always!
Love the CAD to aluminum transition. Some good editing there.
Great build. Love your shop. Impressive truck.