SAFETY TIP: Put a soft stirofoam type thing on the top of the windshield in case your head slams foward and down... It that happened, your head would be split open where ever you hit it... Forehead, nose or mouth... This is IMPORTANT. Daniel
Welcome to the western united states, especially the PNW. Idaho is pretty but everywhere you go here is beautiful. Lake Pend Oreille is really beautiful .
Not sure how far is Hadden lake from there ? I almost bought a place on that lake in 97 I’m pretty sure it’s not listed for $112 k 2 bedrooms dock and 150’ lake front, yea sometimes I think how could I not think that wouldn’t have been a great retirement plan . My word of advice as expensive as every thing is today it will never be anymore affordable as it is right now in a general sense .
I grew up in the Finger Lakes region of upstate NY. Hard to beat for beauty year round! Then moved to the Sandpoint area. The only time the Finger Lakes region beats out the Sandpoint area is the peak of fall colors! I really miss the oaks and maples covering the hills! But the rest of the time, the Rockies are AMAZING! I love living in the Sandpoint area!
GHPC has been one of my favorite channels for years now. Not just because of the content, but also because of the guys behind the channel. They never take themselves or any of their mistakes too seriously. I also love how they take feedback from their audience and use the knowledge of others to make their builds even more epic! Keep it up guys!
The biggest problem with this is if it takes more water than it can displace, it will sink like a rock. Since this boat has a pretty big scoop, i suggest you make a rack with a fast inflating rescue buoy on the back (they're not that big) and the fill sensor can be in the engine bay at the top. If it sinks, this deploys and keeps it afloat. Two other mods, T end for the jet, and a set of stability wings.
@@GrindHardPlumbingCo Might even want to look at guys that race snowmobiles on lakes... they use a simple buoy and rope system to be able to recover the snowmobiles off the bottom of lake when they sink them.
Ariat! Awesome sponsor! Best boots I've ever owned. I go through a pair of boots every year and I've tried all the major brands. Ariat was the most comfortable and waterproof of any work boots I've owned.
I’ve always wondered if some larger company ever wanted to buy one of your prototypes and mass produce them. I’m definitely jealous of the pay time you get on camera
People would buy them but they would be so commercialized they would be made cheap and underpowered. They would also probably cost the same as a Turbo RZR if not more.
That was emotional lol My mother passed so all I have is my father so that was so awesome to see the dad out there having funn together and epic video the boat done great and a beautiful lake ! Much love brothers ❤️🤙🤝
This is so epic guys!! I have wanted to say for a while now that your channel is top notch! The energy and content is second to none. The videos are well edited and absolutely no filth so I'm totally confident in letting my kids watch them. Keep it up guys! I'm a grindhardplumbingco'er for life!
You are literally a genius I've been watching for a couple years now an can't believe some of the things you've made. I'm from BC Canada an really enjoy building old three wheelers an dirt bikes so this channel is a absolute beauty to me
@@intricateinc8566 Nice to hear from another Canadian ☺️ yes it sure is ! I find the older I get the more I want to play with smaller toys an thing s from my childhood haha so these guys really make that happen lol
@@BCATC.250r Exactly, when we are young we are all in a hurry to grow up. And then we grow up and wish we were young again. Best we can do is infuse some childhood wonder into our responsible adult lives and have some laughs and smiles along the way.
@@intricateinc8566 I could not have said it better myself my friend I wish everybody thought this way! There's nothing that makes me happier then playing around on these old bike with my 2 young boys. I hope they can slow down an take it all in like you just mentioned
When I found Grind Hard Plumbing Co. it was the 100hp jet boat thumbnail that caught my eye. Luckily it was right at the beginning of the build. I started watching for the jet boat but I keep watching for all the Rad Shit you guys do and build. This episode was everything I had hoped it would be. The boat performed really well, in fact far better than I thought it would. Great job GHPC. You consistently exceed my expectations. Cheers!
I love how much the team has grown, and you still haven't changed. You all are the best. This is the 3rd mini jet that all of my favorite channels have introduced. You are the only one who has actually done it. That is what separates you from the rest.
Can I just point out how awesome and on point the camera work and edit is on this? This is reaching Top Gear UK levels! I've no idea where that is, but I wanna go on holiday to that lake now 😍
Been watching you gents for so long now and your builds, sends and antics are always the best! Keep killing it y’all are absolutely lit! And that mini jet boat is total fire!!
I'd just like to say, how much I look up to you guys, working in a shop making whatever crazy idea comes to mind is my dream. I'm currently in HS and taking as many engineering classes as humanly possible. I just recently learned how to plasma cut and next is waterjet. Thanks for doing what you guys do, its beyond just making cool $#1+ it's inspiring!
Hey guys, if anyone sees this, spread the word, these fake content creators act like they are the person your watching but it's indeed a scam, although you might get excited, don't rush into doing exactly what they say, instead wait and think about the logic behind it. If you need even ask another person for recommendations. -Caden
Been watching since you guys began with the Barbie car and think this is one of my favorite builds. Cool thing about your guys is how you still are the same you were when you started and always do fresh new things with the same Grind Hard feel. Thanks for the entertainment and ideas for builds of my own. Dont ever change for anything, stay true and send it.
Your genuine excitement for what you do always comes shining through. You really are like a bunch of 12 year olds..and I mean that in the nicest possible way. A big hi and well done from the far away land of Tasmania..
i feel like this is proof that ethan i a certified madman, and should never be stopped mad respect i love seeing you guys take a break form the grind to full send it
Ah what a wonderful way to start the weekend with a video featuring hands down the coolest build you guys have done to date. Always have a huge smile on my face watching you guys enjoy yourself, keep being awesome!
Been keeping up with build. Reminds me of so many summers growing up on the lake, pulled by an all-aluminum boat my grandfather bought in early 60’s because “we’ll never have to buy another one” (he was right. Boat belongs to cousin today). That boat is a work of art, guys. It has beautiful, classic lines and I am sooo happy for y’all. All that said, I’m mainly here to say - your Dad is SOOOO COOL! 👍🏼 Kudo’s, Carl!!
Yet another reason I am a happy subscriber. Love watching the wheels turning as you guys come up with stuff and then just bang it out. Keep the great content coming gentlemen @ Grind Hard Plumbing Co
your dad taking it out made me smile remembering my father ...he had 5 boys and girls...he was a processional driver as were all of us boys .. every time we modded a car he had to take it for a run ... he never abused them... but he took them to the max without damage ..... I'm the baby of the family...I was the last . RIP John James Dougherty.. WWII south Pacific veteran.. fearless to the end ..June 31, 1925- June 28 1995
I'm wondering if a 3-4" 'hydrofoil'type fin on each side of the front hull would keep it from nose diving so deeply?Keep on doing what you do guys,it's always a wild ride for us too.
So awesome! Only thing that worries me is the top of the windshield bar.. id hate to see someone whack there face into that.. maybe add some foam padding or something? Even some thin stuff.. Either way that thing is sick and looks like everything works great on it!
man, watching them test this that has been my biggest concern. its like watching someone just run their finger nails over a chalkboard without touching it. I see a serious dentist trip in their future...
Great stuff guys! Just need some quality of life improvements: - Cockpit padding - Faster bilge pump - Swamp anti-sinking inflatable (use a small self-inflating emergency raft, as described elsewhere) - Safety cutoff If you can't get a better bilge, or maybe even if you can, what about doing a skirt around the cockpit like a whitewater kayak? That would really help keep out the splashes, and might even save you from getting swamped. Worth a think. Speaking of whitewater, when are you taking this little monster out on the river? Can't wait to see it shredding some class 2 and 3.
Hi Guys from Australia! found this channel after seeing you on stanceworks, been following you ever since! Love all the fabricating & cool home made "toys", & once again this video was epic, but the thing that really stood out to me were the wide shots toward the end of the video, they really added an emotional "feel" to the video. Props to your production crew, this was amazing!
Looks great and like a blast! Maybe add some pink foam strips for on top of the windshield and the piece for the metal above your shins. Don't want anyone to lose some teeth or hit a nose.
A lot of people overlook buying sign blanks. I use them a lot in my fab projects because its 6160 x 1/8" at whatever dimension. Super hard, easy to work with, and can hold a tap for smaller bolts.
Awesome job guys and I have to say I'm jealous of how much fun all of you have! Carl probably felt like he was 20 again and having a great time ... cool!
Dang. That was epic. No other word will suffice here, in my opinion. Kudos for the build, for all the fun you guys had, and especially to Carl for being such a cool dad!
Guys, such an amazing project. Props to you all in the growth of skills. Not only in fabrication but also in video production! Love watching your content! Thank you for making it enjoyable for all ages too! 😎
I think y’all should be wearing a helmet or put some padding on that windshield. If you hit a big wave and your head smacks that windshield it’s lights out. Be safe guys
Reminds me of the indoor go karts I rode almost all day on one of my son's birthdays. Certainly sore from head to toe for several days after especially the ribs from the wrap around seat! So Much Fun Though!
Maybe wear knee pads and/or a seat suspension/dampening system like a race boat. Also consider a kayak spray skirt. I must confess that I live vicariously through you guys. You might appreciate my rocket stove see ua-cam.com/video/cy35ipckl4s/v-deo.html. Has a US Utility Patent.
Watch some short course stadium jetsprint boat action to readjust your perception of how fast a jet boat can accelerate. Search YT for "jetsprint ENZED"
@@DiscoFang those are literally 2x the length and purpose built for speed. This is built to hit rocks and trees in a shallow river. It can't compete on open water. Also watch this video where it is bouncing out of the water and having trouble maintaining 30mph
That micro has great attitude while jumping. Amazing build guys!! Looks like so much fun on an absolutely gorgeous backdrop! Kudos for the great parenting example! Awesome to see in todays world ❤️
Love it guys!! do yourselves a favour and put some foam on the window area in case u fly forward and take ur teeth out or wear a helmet! keep the videos coming!!
Dang! How much for one of these? Seriously Interested. BTW every build I've seen from you guys is straight up 🔥. Keep up the good work and great content!!
Greatest video ever. Congratulations on the UA-cam award. I have a good friend that lives on Hayden lake and we take the boat to pend oreille sometimes I can't imagine how great it would be to see you guys out there jumping wakes in a hot wheels boat. Keep it up
Ethan that thing is effing awesome way to have it dialed in every time I watch you guys it's a major upgrade good job boys. Needless to say everybody's jealous we all need one.
I’m always impressed with how you guys come up with new and improved parts for whatever you’re working on. I was thinking that little boat would’ve been faster than 42 m.p.h. with having 100 h.p. but maybe the torque isn’t there. I had a 17’6” fibreglass boat in the early 70’s with a Mercruiser in/out drive and an inline GM 250c.i. 6 cylinder engine rated at 165 h.p. I put a stainless prop on it and it did the same speed you guys were running at. I figured you would get about 50 m.p.h. Love your channel guys.👍👍🇨🇦
Your a talented fabricator and DIY guy there is no disputing that fact. I do wonder when you put a jet boat into the water with rocks without thinking that may be a problem. The air box is a similar situation. I do like this project it's just that right amount of danger,risk,speed and water. Brilliant.
Seeing your dad rip on that thing was pretty cool. I have not seen him in many years. Looking good. Nice footage of our beautiful lake. It has been perfect weather to be in and on the water.
Look like the windshield in perfect line with teeth and dash bang knees. But that thing is sick asf. Love the fabrication work awesome like always nice job 👍
That's a full send! Lol! Edwin like father like son! That's awesome guys! Ethan needs to make another one, but this time make it a hydroplane or drag boat! So much fun guys! Thanks for sharing!
Looks awesome!! I might suggest exploring trim tabs on the back and some strakes along the hull to help deflect the spray and give it a little more authority in turns
SAFETY TIP: Put a soft stirofoam type thing on the top of the windshield in case your head slams foward and down... It that happened, your head would be split open where ever you hit it... Forehead, nose or mouth... This is IMPORTANT. Daniel
Or just wear a helmet
Can we take a moment to just appreciate how beautiful that lake is in those drone shots
Welcome to the western united states, especially the PNW. Idaho is pretty but everywhere you go here is beautiful. Lake Pend Oreille is really beautiful .
Not sure how far is Hadden lake from there ? I almost bought a place on that lake in 97 I’m pretty sure it’s not listed for $112 k 2 bedrooms dock and 150’ lake front, yea sometimes I think how could I not think that wouldn’t have been a great retirement plan .
My word of advice as expensive as every thing is today it will never be anymore affordable as it is right now in a general sense .
It's how I imagine Canada to look, yet it's still the USA just. I'm probably totally wrong though as I've never been there.
@@althejazzman the Rockies go all the way through Canada. So if you follow the Rockies, I think it's similar for many many miles north and south.
I grew up in the Finger Lakes region of upstate NY. Hard to beat for beauty year round! Then moved to the Sandpoint area. The only time the Finger Lakes region beats out the Sandpoint area is the peak of fall colors! I really miss the oaks and maples covering the hills! But the rest of the time, the Rockies are AMAZING! I love living in the Sandpoint area!
Your dad having a blast was definitely the highlight of the video. Awesome video and amazing tiny boat. Thanks for another entertaining one! 🦅🇺🇲
Glad you enjoyed that part! And you’re very welcome!
@@GrindHardPlumbingCo yea me to i subed to his channel
Go dad!
He was forsure ripping that thing harder then the kids 😂
@@nr_beast2677 none that sissy shit just get it gotta get it
GHPC has been one of my favorite channels for years now. Not just because of the content, but also because of the guys behind the channel. They never take themselves or any of their mistakes too seriously. I also love how they take feedback from their audience and use the knowledge of others to make their builds even more epic! Keep it up guys!
The biggest problem with this is if it takes more water than it can displace, it will sink like a rock. Since this boat has a pretty big scoop, i suggest you make a rack with a fast inflating rescue buoy on the back (they're not that big) and the fill sensor can be in the engine bay at the top. If it sinks, this deploys and keeps it afloat.
Two other mods, T end for the jet, and a set of stability wings.
That’s actually a great idea. Was planning on adding floatation foam, but that sounds easier!
This is such a great a community with good feedback and a creator who listens and pays attention
@@GrindHardPlumbingCo put a ring of pool floats on it!
@@GrindHardPlumbingCo Might even want to look at guys that race snowmobiles on lakes... they use a simple buoy and rope system to be able to recover the snowmobiles off the bottom of lake when they sink them.
@@requiredusername5731 I think the max was 42 mph
Ariat! Awesome sponsor! Best boots I've ever owned. I go through a pair of boots every year and I've tried all the major brands. Ariat was the most comfortable and waterproof of any work boots I've owned.
My mother was a firm believer in Ariat boots ✌️
I’ve always wondered if some larger company ever wanted to buy one of your prototypes and mass produce them. I’m definitely jealous of the pay time you get on camera
People would buy them but they would be so commercialized they would be made cheap and underpowered. They would also probably cost the same as a Turbo RZR if not more.
Plus it couldn't be made from old parts from random vehicles would need to be off the shelf parts or easily manufactured parts
Would be possible but I don't think any company would take the time to reverse engineering one and the amount of custom parts would be insane
@@spoze171 not expecting a 1 for 1 replica but reasonably close could sell
@@Spadookie underpowered would be the issue.
That was emotional lol My mother passed so all I have is my father so that was so awesome to see the dad out there having funn together and epic video the boat done great and a beautiful lake ! Much love brothers ❤️🤙🤝
Carl has to be the coolest dad ever! Props to him for jumping right in and sending that thing! :)
Dude had a smile from ear to ear! Love it!
This is so epic guys!!
I have wanted to say for a while now that your channel is top notch! The energy and content is second to none. The videos are well edited and absolutely no filth so I'm totally confident in letting my kids watch them. Keep it up guys! I'm a grindhardplumbingco'er for life!
You are literally a genius I've been watching for a couple years now an can't believe some of the things you've made. I'm from BC Canada an really enjoy building old three wheelers an dirt bikes so this channel is a absolute beauty to me
Thanks man! I appreciate that!!
BC Born and raised. Yeah glad I found this channel, great ingenuity and fabrication and grown men having some kid fun is always entertaining.
@@intricateinc8566 Nice to hear from another Canadian ☺️ yes it sure is ! I find the older I get the more I want to play with smaller toys an thing s from my childhood haha so these guys really make that happen lol
@@BCATC.250r Exactly, when we are young we are all in a hurry to grow up. And then we grow up and wish we were young again. Best we can do is infuse some childhood wonder into our responsible adult lives and have some laughs and smiles along the way.
@@intricateinc8566 I could not have said it better myself my friend I wish everybody thought this way! There's nothing that makes me happier then playing around on these old bike with my 2 young boys. I hope they can slow down an take it all in like you just mentioned
When I found Grind Hard Plumbing Co. it was the 100hp jet boat thumbnail that caught my eye. Luckily it was right at the beginning of the build. I started watching for the jet boat but I keep watching for all the Rad Shit you guys do and build. This episode was everything I had hoped it would be. The boat performed really well, in fact far better than I thought it would. Great job GHPC. You consistently exceed my expectations. Cheers!
its inspiring to see others live out your dreams love you guys!
Thanks man! We appreciate that!
Love you 😊
I love how much the team has grown, and you still haven't changed. You all are the best. This is the 3rd mini jet that all of my favorite channels have introduced. You are the only one who has actually done it. That is what separates you from the rest.
Can I just point out how awesome and on point the camera work and edit is on this? This is reaching Top Gear UK levels!
I've no idea where that is, but I wanna go on holiday to that lake now 😍
They're at Lake Pend Oreille in Idaho. NE side near Hope. The islands in the lake gave it away for it.
Been watching you gents for so long now and your builds, sends and antics are always the best! Keep killing it y’all are absolutely lit! And that mini jet boat is total fire!!
The video quality is just insane on this channel. Your team is one of the most dedicated on youtube for sure.
Haha! Thanks man!
Until that mean person comes and starts yelling at everyone for teaming 😖
I'd just like to say, how much I look up to you guys, working in a shop making whatever crazy idea comes to mind is my dream. I'm currently in HS and taking as many engineering classes as humanly possible. I just recently learned how to plasma cut and next is waterjet. Thanks for doing what you guys do, its beyond just making cool $#1+ it's inspiring!
Hey guys, if anyone sees this, spread the word, these fake content creators act like they are the person your watching but it's indeed a scam, although you might get excited, don't rush into doing exactly what they say, instead wait and think about the logic behind it. If you need even ask another person for recommendations.
-Caden
Big Props to the video and editing guys! Beautifully done video!
Thanks man!
Simply Marv. 😃
@@GrindHardPlumbingCo My Pleasure! Credit to those who deserve it! As Always, May God Bless you and yours! 😇
Your dad is savage. Hope my kids treat me this way when I'm old
Legit love EVERYTHING about this channel😭😂🤘🏽 keep doing what y’all doing. We love it
Thank you! We appreciate the kind words!
Been watching since you guys began with the Barbie car and think this is one of my favorite builds. Cool thing about your guys is how you still are the same you were when you started and always do fresh new things with the same Grind Hard feel. Thanks for the entertainment and ideas for builds of my own. Dont ever change for anything, stay true and send it.
One of your more beautiful and heartfelt videos. Family and friends having fun together in an amazing landscape ♥️
One of my favorite guys to watch do fab work, your thought process is next level!
You guys seem to always take things I tend to think about and make them a reality, keep up the good work👍
You think up some fun stuff
Thanks man!
Your genuine excitement for what you do always comes shining through. You really are like a bunch of 12 year olds..and I mean that in the nicest possible way. A big hi and well done from the far away land of Tasmania..
Any time Dad is involved you know it's gonna be fun, ALL THE FUNS!
i feel like this is proof that ethan i a certified madman, and should never be stopped
mad respect i love seeing you guys take a break form the grind to full send it
Ah what a wonderful way to start the weekend with a video featuring hands down the coolest build you guys have done to date. Always have a huge smile on my face watching you guys enjoy yourself, keep being awesome!
Been keeping up with build. Reminds me of so many summers growing up on the lake, pulled by an all-aluminum boat my grandfather bought in early 60’s because “we’ll never have to buy another one” (he was right. Boat belongs to cousin today). That boat is a work of art, guys. It has beautiful, classic lines and I am sooo happy for y’all. All that said, I’m mainly here to say - your Dad is SOOOO COOL! 👍🏼 Kudo’s, Carl!!
Ethan's attention to detail ALWAYS makes me smile! All it needs is an auto bilge pump now!
I'd think a kayak-type waist cover thing might be in order.
Thanks man! We have one on the way!
@@Davideo50 A pink skirt would add a nice touch
Bilge pump, foam on the windshield frame for facial contact, and a seat the gives a bit to save the back. So sick dude.
Peanut butter and jealous.
That's so awesome! Your builds are constantly top notch
Thank you!
Yet another reason I am a happy subscriber.
Love watching the wheels turning as you guys come up with stuff and then just bang it out.
Keep the great content coming gentlemen @ Grind Hard Plumbing Co
your dad taking it out made me smile remembering my father ...he had 5 boys and girls...he was a processional driver as were all of us boys .. every time we modded a car he had to take it for a run ... he never abused them... but he took them to the max without damage ..... I'm the baby of the family...I was the last . RIP John James Dougherty.. WWII south Pacific veteran.. fearless to the end ..June 31, 1925- June 28 1995
RIP to your dad! Sounds like a genuine great guy! My father passed away when I was 14, so I understand.
-Ethan
@@GrindHardPlumbingCo 💕
Yeah Boyz!!! My 6 ft kit just showed up!!!!!! it'll go nice with my 10 footer!
I'm wondering if a 3-4" 'hydrofoil'type fin on each side of the front hull would keep it from nose diving so deeply?Keep on doing what you do guys,it's always a wild ride for us too.
They need to see this comment, I'm not a genius but it sounds like it would work to me
THIS!!!!!
On the last video i also mentioned hydrofoils as aj upgrade for it. Its great idea
also wondering if the boat is too small / low for them to fit a scupper valve for one way draining
Trim tabs
Love how your old man just got in and pinned it. Looks like great time at the lake, cheers.
It was hard not to have a smile on my face the whole way through this, such a fun video!👍😎
can we please appreciate the ammmmmmziiiiinnnng editing at 16:43 and out…… amazing drone shots and the music is perfect 🎶🎥🎥🫶🏻🫶🏻🫶🏻❤️
Heck yeah! Thanks!
So awesome! Only thing that worries me is the top of the windshield bar.. id hate to see someone whack there face into that.. maybe add some foam padding or something? Even some thin stuff.. Either way that thing is sick and looks like everything works great on it!
man, watching them test this that has been my biggest concern. its like watching someone just run their finger nails over a chalkboard without touching it. I see a serious dentist trip in their future...
Great stuff guys! Just need some quality of life improvements:
- Cockpit padding
- Faster bilge pump
- Swamp anti-sinking inflatable (use a small self-inflating emergency raft, as described elsewhere)
- Safety cutoff
If you can't get a better bilge, or maybe even if you can, what about doing a skirt around the cockpit like a whitewater kayak? That would really help keep out the splashes, and might even save you from getting swamped. Worth a think.
Speaking of whitewater, when are you taking this little monster out on the river? Can't wait to see it shredding some class 2 and 3.
Hi Guys from Australia! found this channel after seeing you on stanceworks, been following you ever since! Love all the fabricating & cool home made "toys", & once again this video was epic, but the thing that really stood out to me were the wide shots toward the end of the video, they really added an emotional "feel" to the video. Props to your production crew, this was amazing!
Thanks man!
So good your dads face was priceless just full send right away👌
That was a genuine smile on your dad's face. I see the next modification being the dash being notched out with built-in knee pads 😎
Haha! Not a bad idea. 🤣
Looks great and like a blast!
Maybe add some pink foam strips for on top of the windshield and the piece for the metal above your shins.
Don't want anyone to lose some teeth or hit a nose.
😬 not knee pads 😅
A lot of people overlook buying sign blanks. I use them a lot in my fab projects because its 6160 x 1/8" at whatever dimension. Super hard, easy to work with, and can hold a tap for smaller bolts.
"buying"
u guys consistently come out with some of the most exhilarating videos on youtube
Thanks man!!
Awesome job guys and I have to say I'm jealous of how much fun all of you have! Carl probably felt like he was 20 again and having a great time ... cool!
Really enjoyed this one! You guys sure know how to have fun.
Thanks man!
Dang. That was epic. No other word will suffice here, in my opinion.
Kudos for the build, for all the fun you guys had, and especially to Carl for being such a cool dad!
Scam don’t reply
The trim control came out great! You can even add more notches if you find it planes a little better with some trim.
The micro jetboat is amazing! Awesome video guys!
I think you guys just created a new sport 🔥
Guys, such an amazing project. Props to you all in the growth of skills. Not only in fabrication but also in video production! Love watching your content! Thank you for making it enjoyable for all ages too! 😎
Have a good weekend boys
That full send attitude is hereditary. I KNEW IT! Coolest dad ever.
And coolest micro jet boat ever!
I think y’all should be wearing a helmet or put some padding on that windshield. If you hit a big wave and your head smacks that windshield it’s lights out. Be safe guys
I'm kinda new here, but I am blown away by the craftsmanship. You have a new fan, well done.
U guys never disappoint ! Always building amazing stuff !!! 🤘🤘🤘
still love seeing are local area actually having some great people that build great projects and show off this beautiful landscape
My goodness what a gorgeous lake! 😲
Hey Grind Hard, I didn't think I would like the boat build but this last video changed my mind. You guys tore it up out there, loved it.
This is so much more fun than a jet ski! But I am still very sore 2 days later haha
Haha! Same! 🤣
Reminds me of the indoor go karts I rode almost all day on one of my son's birthdays. Certainly sore from head to toe for several days after especially the ribs from the wrap around seat! So Much Fun Though!
Maybe wear knee pads and/or a seat suspension/dampening system like a race boat. Also consider a kayak spray skirt. I must confess that I live vicariously through you guys. You might appreciate my rocket stove see ua-cam.com/video/cy35ipckl4s/v-deo.html. Has a US Utility Patent.
Guys you out did yourselves on this build. Love it!
I'd still like to see you guys build a mini offroad wrecker to take down to Matt's off road tow truck Olympics I thing it would be hilarious 😂.
"World's biggest off-road wrecker rescues world's smallest camper"
So jealous of how clear the water is at that boat launch. Beautiful!
You guys need to make "knee notches" in the dash, and pad them well for maximum send-age.
Was thinking the same thing.
8:08 *M O D I F I E D F I L E*
You guys have to race it with a real big speed boat and compare them,,, would be awesome,,, because this thing rips brutal... 👍Unbelievable work
It might win to 20-30mph, but the big boat would be able to stay in the water where this thing bounces around. It's all about agility over speed.
Watch some short course stadium jetsprint boat action to readjust your perception of how fast a jet boat can accelerate. Search YT for "jetsprint ENZED"
@@DiscoFang those are literally 2x the length and purpose built for speed. This is built to hit rocks and trees in a shallow river. It can't compete on open water.
Also watch this video where it is bouncing out of the water and having trouble maintaining 30mph
@@stevegredell1123 Refer to the original comment about racing against one. It’d be no contest.
That micro has great attitude while jumping. Amazing build guys!! Looks like so much fun on an absolutely gorgeous backdrop! Kudos for the great parenting example! Awesome to see in todays world ❤️
next step: a tiny trailer for behind one of the powerwheels and an epic adventure?
dude the trim lever is pure genius, elegance in work. simple, functional, and it looks cool!
I love how you modified the file!
Hahaha! Oops. 🤣
same ;-)
The micro boat has got to be one of the sickest builds yet! That thing is awesome 👌
Love it guys!! do yourselves a favour and put some foam on the window area in case u fly forward and take ur teeth out or wear a helmet! keep the videos coming!!
Finally stretching the flippers on the mini jet boat! I love this project!
Dang! How much for one of these? Seriously Interested. BTW every build I've seen from you guys is straight up 🔥. Keep up the good work and great content!!
We’re definitely not building them to sell, but hit up Jetstream Adventure Boats for a hill kit!
Greatest video ever. Congratulations on the UA-cam award. I have a good friend that lives on Hayden lake and we take the boat to pend oreille sometimes I can't imagine how great it would be to see you guys out there jumping wakes in a hot wheels boat. Keep it up
Ethan that thing is effing awesome way to have it dialed in every time I watch you guys it's a major upgrade good job boys. Needless to say everybody's jealous we all need one.
congratulations for the video, and the projects you do, you are monsters, greetings from Cádiz, Spain
I’m always impressed with how you guys come up with new and improved parts for whatever you’re working on. I was thinking that little boat would’ve been faster than 42 m.p.h. with having 100 h.p. but maybe the torque isn’t there. I had a 17’6” fibreglass boat in the early 70’s with a Mercruiser in/out drive and an inline GM 250c.i. 6 cylinder engine rated at 165 h.p. I put a stainless prop on it and it did the same speed you guys were running at. I figured you would get about 50 m.p.h. Love your channel guys.👍👍🇨🇦
fsst ebkihgh
Smashing build lads :) a longer ride plate could help with the bouncing, I wish I could get my dad in my boat all the best from the UK, Rock on !!
I'm so happy this video didn't end with you guys getting citations and both boats getting impounded, so many water laws broken! Love you guys!
Your a talented fabricator and DIY guy there is no disputing that fact. I do wonder when you put a jet boat into the water with rocks without thinking that may be a problem. The air box is a similar situation. I do like this project it's just that right amount of danger,risk,speed and water. Brilliant.
Y'all have the coolest jet boat out of all the jet boats on UA-cam plus the sph smile per hour is great for whole family
A great job on the camera angles , editing, and music, and of course the boat build.
Seeing your dad rip on that thing was pretty cool. I have not seen him in many years. Looking good. Nice footage of our beautiful lake. It has been perfect weather to be in and on the water.
You guys have done a great job getting that boat done Real test results great Loved it
Fireman 🔥🔥 🔥
Look like the windshield in perfect line with teeth and dash bang knees. But that thing is sick asf. Love the fabrication work awesome like always nice job 👍
That's a full send! Lol! Edwin like father like son! That's awesome guys! Ethan needs to make another one, but this time make it a hydroplane or drag boat! So much fun guys! Thanks for sharing!
Yewwww
That thing is awesome!!! You guys build some very impressive stuff. Great fabricating skills!
Nothing makes me happier than seeing fathers, and sons acting wild. I love my dad and two older brothers. ❤️🇺🇸
Amazing video as usual guys! Also making a UA-cam channel for your dad too so freaking awesome and wholesome!!
Killer aesthetics. Wholesome content. Super chill and crazy at the same time.
Holy Moly! You people are ripping the fabric. Respect!
That was one of your coolest videos yet! Great production/ editing, and a crazy little boat getting absolutely aired out👍
Dads hanging with the boys gotta love it !!!
what a great video! Shots were amazing, seeing your dad rip that thing awesome. See you guys have genuine fun. Awesome!
Looks awesome!! I might suggest exploring trim tabs on the back and some strakes along the hull to help deflect the spray and give it a little more authority in turns
by far the best thing you guys built, looks like so much fun