The Pinstripe is awesome! Well worth the time, when you have the skill to do it. I'm going to try to do one with a dark purple glitter fade, we will see how it works
Great job!! My first time watching one of your videos and now a subscriber! Btw, your shop looks great, I wish I had that much space and equipment, awesome!! Thanks for sharing!
I just wanted to say thank you to all that have been following the project I appreciate all your comments and look forward to bringing you more content
Jonathan Flynn it was the factory blue paint I used but I did darken it with some black I didn’t care for light tone I wanted a darker blue thanks for watching I appreciate it
I really want to do mine that color blue! Is it navy blue? Metallic navy? I can't tell exactly, but I'm getting mine done soon, i would really appreciate the exact color sir, thank you and God bless!
Great job, love the 2 tone and pinstripe. Looks like you're using a gun with the variable nozzle. Do you remember how many turns out on the tip and what pressure you were shooting at? The texture you got is exactly what I want when I do mine. Thanks!
I am using an adjustable nozzle I think the pressure was like 55psi but as far as getting a certain texture it’s really trial and error it’s hard to explain but I am going to do a video about the different things I’ve learned with raptor liner so check back for that soon
That looks amazing. What grey was that? I'm thinking about doing my 6.7 Powerstroke blue jean grey 2 tone. These colors look almost identical to the ford factory colors just wondering what grey that was so I can save the info for when I do mine.
It was just 2 stage base coats I had left over it technically doesn’t follow their instructions because they want you to use paint without the binding agents so it’s more pigment, and I’ve also used single stage as well. Neither had any issues that I can see
@@notchback93 ok thanks. Yeah they are trying to sale the tint they have at 3oz for $25 and I just can't see it. Looked on UA-cam and yours was the first video I seen not using what they sale. Good job looks great and Thanks for the reply
@@1944welderman no problem appreciate you, responding to my info most don’t so I have no idea if I helped them, also I’ve used the kits they supplied with tint it’s pricey but at least if you have a problem with their supplies you know it’s nothing you caused, just for piece of mind, good luck with your project
Could have prevented that ghost stripe. Should have sprayed the blue first without taping the pin stripe, to get a feather edge. Then spray the grey coat last.
Tyler Harris I was impatient my cousin told me to feather edge the grey after we shot it before the blue and I didn’t want to! And unfortunately that decision caused the flaw in the job I take full ownership of that, thanks for watching
Tyler Harris I definitely appreciate that but I was disappointed that I didn’t take my cousins advice because that flaw definitely could have been avoided, that’s what happens when your stubborn 😂
No sheen really it’s pretty much flat, I used whatever paint I had lying around. I would suggest using a solid color paint preferably urethane based products. I don’t think metallics will work. But you can’t try. Raptor liner recommends to have the paint mixed with out the binders added in so basically it would be pure pigment. I did not follow that recommendation and used what I had on hand in my paint cabinet the day we sprayed my truck it’s been 4 years and it looks the same.
I LIKE THAT JOB AND THE LINE MARKS TOO, ECCELLANT MATE, FROM DAWN UNDER, M WILLING TOO, TO DO MY UTE HOLDEN 1977/78 HX HZ, BUT SOME TOLD ME IT MIGHT DOES NOT LOOK GOOD, TO ME IT WILL, IN RED WITH CLEAR URETHANE, I'D THEY ALL LOOK GOOD GREAT JOB AGAIN
I don’t exactly remember but the bottles are made to hold the liner and the paint and leave enough room to mix together in the bottle 3/4 Oz should be good, and if you buy a kit with the tint supplied with it they already did the math for you, just mix each bottle the same way that’s the important part
1lionconqueror thank you I want to say like 45-50 psi but if you watch my how to spray raptor liner video I believe I say the exact psi thanks for watching
Hi I like the results, thinking of doing the same to my 1989 4 x 4 Chev ext cab. One question when you overspray the grey with blue did you have to prep the grey so it would stick?
It is. I ignored my buddy who suggested we sand it before the other color was sprayed I thought The texture would hide it, but I was wrong. Lesson learned
JZ1988 yes it’s a 8ft bed. My advice is to buy at least five one gallon kits but if you can get one extra kit if you buy them off Amazon you can return the extra. You don’t want to run out midway through the project! Also the amount needed is directly affected by the thickness you spray it. I used 5 of my 6 kits, but I have used some of the last kit for touch ups, thanks for viewing feel free to ask anymore questions you may have
That makes sense. Blue looks great. All the prep is a lot of work but I bet it was one of those jobs that was way worth it once you finished that last coat and stepped back. Painting a car seems like such a luxury to me but doing it yourself makes it seem like more of an option. Good work!
Greg Green So the original color is called intense blue. So took that and darkened it with some black to flatten it out a bit, when I first sprayed it with the original blue it was way to bright and I wanted a darker blue.
Hey man thanks for subscribing! I want to say I used 5 complete one gallon kits if I’m not mistaken I ordered 6 and had a full kit and a partial left over that was enough to do the whole truck including inside the bed. Hope your project goes well 👍🏻. Don’t under buy you’d better having to much than not enough
Rebekah Tinsley I used 220-320 I had a ton of 320 lying around the majority was that buy areas of primer were sanded with 220 grit i would advise to use anywhere from 180-220 I took a chance with the 320 grit but haven’t had any adhesion issues
javier Guzmán I used almost 4 1 gallon kits for the complete truck including inside the bed it’s a large truck and I wanted to make sure we didn’t run out halfway through the project
That raptor liner blue is exactly what I wanna do with my old ford ranger. This confirms it. Looks phenomenal.
Thanks I appreciate that, it’s been a couple years and it holding up great 👍🏻
Best tutorial on doing a raptor liner paint job I’ve seen so far!
The Pinstripe is awesome! Well worth the time, when you have the skill to do it. I'm going to try to do one with a dark purple glitter fade, we will see how it works
The stripes give it a very cool touch
I appreciate that it was a bit of extra work but the results were worth it!
The two tone and pinstripe really looks awesome 👏
You have no clue how proud I am. Great job and cant wait to see it in person broski.
Four years later to the day big blue was officially sold to a proud new owner I wish them both well. All good things come to an end!
How did the color withstand the UV rays after 4 years? Did you protect it with a clear coat or ceramic?
Awsome,i like,it this guys
This looks incredible! Awesome job.
Great job!! My first time watching one of your videos and now a subscriber! Btw, your shop looks great, I wish I had that much space and equipment, awesome!! Thanks for sharing!
Sorry I missed your comment, I appreciate the support
I just wanted to say thank you to all that have been following the project I appreciate all your comments and look forward to bringing you more content
Car Kulture was that their standard blue dye or did you mix your own?
Jonathan Flynn it was the factory blue paint I used but I did darken it with some black I didn’t care for light tone I wanted a darker blue thanks for watching I appreciate it
Y’all did a great job looks awesome
I really like that blue
I really want to do mine that color blue! Is it navy blue? Metallic navy? I can't tell exactly, but I'm getting mine done soon, i would really appreciate the exact color sir, thank you and God bless!
@@shaundibene7 hey I mixed some blues, greys and black that I had,so it’s a custom mix that unfortunately I couldn’t tell you exactly how to make it
Looks good with the pinstripe. Blue and silver looks nice also.
James Frantz thank you that’s my favorite part about this paint job
Awesome Job on the truck
Thanks man I appreciate the compliment! Thank you for watching
Standing tall 😂 it looks amazing
Great job, love the 2 tone and pinstripe. Looks like you're using a gun with the variable nozzle. Do you remember how many turns out on the tip and what pressure you were shooting at? The texture you got is exactly what I want when I do mine. Thanks!
I am using an adjustable nozzle I think the pressure was like 55psi but as far as getting a certain texture it’s really trial and error it’s hard to explain but I am going to do a video about the different things I’ve learned with raptor liner so check back for that soon
@@notchback93 Thanks! I'll keep an eye out for the video.
they are right for the pin strip looks sick
Amazing! Great work, guys.
Truck looks awesome!
Appreciate it 👍🏻
It looks awesome!! I love it!!
Thank you for the compliment 👍🏻
Perfect. Wanted to see the blue that I will use on my truck. nice.
What color blue is it?
It’s the original blue I don’t remember the code but I think they called it sonic blue but I could be wrong
That looks amazing. What grey was that? I'm thinking about doing my 6.7 Powerstroke blue jean grey 2 tone. These colors look almost identical to the ford factory colors just wondering what grey that was so I can save the info for when I do mine.
I mixed it randomly from a couple different paints I had lying around
Looks great! Do you have an update video on how well the Raptor has held up?
Subscribe and watch my videos it’s in there somewhere, but it still looks the same as it did then
great work, i wish that fellow hold that camera more little steady loll, well done fellers
That paint you used was that a single stage paint or a 2 stage base coat clear coat? Or did you just have some tint ?
It was just 2 stage base coats I had left over it technically doesn’t follow their instructions because they want you to use paint without the binding agents so it’s more pigment, and I’ve also used single stage as well. Neither had any issues that I can see
@@notchback93 ok thanks. Yeah they are trying to sale the tint they have at 3oz for $25 and I just can't see it. Looked on UA-cam and yours was the first video I seen not using what they sale. Good job looks great and Thanks for the reply
@@1944welderman no problem appreciate you, responding to my info most don’t so I have no idea if I helped them, also I’ve used the kits they supplied with tint it’s pricey but at least if you have a problem with their supplies you know it’s nothing you caused, just for piece of mind, good luck with your project
It looks great brother
It looks very nice I wish that I could have y'all guys to do my truck
Bring it to Connecticut we will take care of her
Could have prevented that ghost stripe. Should have sprayed the blue first without taping the pin stripe, to get a feather edge. Then spray the grey coat last.
Tyler Harris I was impatient my cousin told me to feather edge the grey after we shot it before the blue and I didn’t want to! And unfortunately that decision caused the flaw in the job I take full ownership of that, thanks for watching
Car Kulture still looks good tho
Tyler Harris I definitely appreciate that but I was disappointed that I didn’t take my cousins advice because that flaw definitely could have been avoided, that’s what happens when your stubborn 😂
The subsequent question would be what kind of paint do you use to tint it? And the tintable raptorliner, not the black a stje base, correct?
Yes you have to buy the tintable raptor liner it will be white instead of black
I like your John Denver reference
RIP to Mr Denver
Does your blue have that metallic Sheen to it because you use silver as a base?
No sheen really it’s pretty much flat, I used whatever paint I had lying around. I would suggest using a solid color paint preferably urethane based products. I don’t think metallics will work. But you can’t try. Raptor liner recommends to have the paint mixed with out the binders added in so basically it would be pure pigment. I did not follow that recommendation and used what I had on hand in my paint cabinet the day we sprayed my truck it’s been 4 years and it looks the same.
Gorgeous!
Thank you for the compliment
I LIKE THAT JOB AND THE LINE MARKS TOO, ECCELLANT MATE, FROM DAWN UNDER, M WILLING TOO, TO DO MY UTE HOLDEN 1977/78 HX HZ, BUT SOME TOLD ME IT MIGHT DOES NOT LOOK GOOD, TO ME IT WILL, IN RED WITH CLEAR URETHANE, I'D THEY ALL LOOK GOOD GREAT JOB AGAIN
Thanks for the compliment and thanks for subscribing to my channel
Great color! What is it?
The blue is mixed off the original dodge blue, I did darken it with some black, the grey is just some random silvers and black I had hanging around
Looks great 👍.
Thanks bro I may do a follow up video soon I’ve been driving the truck so I’ll show how it’s holding up
Should sand it with 180, 220 at the finest. The bed liner needs good scratches to bite to.
Thanks for the advice! it’s been 18 months it’s still looking like the day I sprayed it even after using it for my work/plow truck
just an fyi for next time , the front doors window lower seals just pop out in 1 second
1 second was the exact amount of time that we couldn’t spare!!!!! We were under the guillotine on this one Mr. TheCaperFish
What weight of just tint did you add per bottle ? Directions say 3 ounces per bottle but I'm curious as to the weight of 3 oz. Blue looks killer. Thx
I don’t exactly remember but the bottles are made to hold the liner and the paint and leave enough room to mix together in the bottle 3/4 Oz should be good, and if you buy a kit with the tint supplied with it they already did the math for you, just mix each bottle the same way that’s the important part
Looks great..I don't like the edge going down the side where you overlapped the two colors. You could have had the two colors meet at the edge...
Thanks for the advice
What pressure were you running? Nice job looks really good!
1lionconqueror thank you I want to say like 45-50 psi but if you watch my how to spray raptor liner video I believe I say the exact psi thanks for watching
@@notchback93 cheers mate, thanks for that.
Hi I like the results, thinking of doing the same to my 1989 4 x 4 Chev ext cab. One question when you overspray the grey with blue did you have to prep the grey so it would stick?
I did not probably too late of a response
Looks awesome
J FERRELL-66 thanks bro I appreciate it I just finished another raptor lined project I will upload the video shortly come back and check it out
I definitely will man keep putting out the good content
Your camera work needs some help! I got Motion sickness from you moving the thing around . How many kits?
You talk crap about my camera work but then want me to help you by answering your questions 😂 GO F**K YOUR SELF have a nice day tough guy
Is that a tape line under the pine stripe? It runs the whole length of the body?
It is. I ignored my buddy who suggested we sand it before the other color was sprayed I thought The texture would hide it, but I was wrong. Lesson learned
How many cans of raptor liner did you use i know at w and r they have 4 cans in a kit how many kits did you need
Four 1 gallon kits
Do you know what colour code the blue is ?
Subscribe and I’ll tell you
Is that an 8ft bed @ 9:48 ? If so, how much product do you think it took to do the whole truck? Thanks!
JZ1988 yes it’s a 8ft bed. My advice is to buy at least five one gallon kits but if you can get one extra kit if you buy them off Amazon you can return the extra. You don’t want to run out midway through the project! Also the amount needed is directly affected by the thickness you spray it. I used 5 of my 6 kits, but I have used some of the last kit for touch ups, thanks for viewing feel free to ask anymore questions you may have
That makes sense. Blue looks great. All the prep is a lot of work but I bet it was one of those jobs that was way worth it once you finished that last coat and stepped back. Painting a car seems like such a luxury to me but doing it yourself makes it seem like more of an option. Good work!
Is this the raptor gun with the adjustable tip ?
I think it was but it’s hard to remember.
What color blue is that?
Greg Green So the original color is called intense blue. So took that and darkened it with some black to flatten it out a bit, when I first sprayed it with the original blue it was way to bright and I wanted a darker blue.
How much raptor liner did the whole spray job end up needing .. getting ready to do my 3500 ram -
Hey man thanks for subscribing! I want to say I used 5 complete one gallon kits if I’m not mistaken I ordered 6 and had a full kit and a partial left over that was enough to do the whole truck including inside the bed. Hope your project goes well 👍🏻. Don’t under buy you’d better having to much than not enough
@@notchback93 damn 5 kits? Thats many huh. How many coats?
How soon after did you pull pinstripe tape?
I’d say about 30-45 minutes after I was done spraying if I remember correctly
How many kits did it take to do your truck?
5-1gallon kits
What grit sandpaper were you using
Rebekah Tinsley I used 220-320 I had a ton of 320 lying around the majority was that buy areas of primer were sanded with 220 grit i would advise to use anywhere from 180-220 I took a chance with the 320 grit but haven’t had any adhesion issues
with how many quarts are used for this truck
javier Guzmán I used almost 4 1 gallon kits for the complete truck including inside the bed it’s a large truck and I wanted to make sure we didn’t run out halfway through the project
Hey man how many cans did you use
5-1 gallon kits
how many bottles did you use
5-1 gallon kits
That tape line ruined it for me
Me too but when you make a cake your gonna break some eggs 🥚
How much raptor did it take?
About 4 complete kits I bought 5 and had some left over
@@notchback93 so 16 qt?
@@americanmade8982 yes
What is the code of your blue raptor m
It was the factory blue that I darkened with some grey and black
How many kits?
4-1 gallon kits
Once again another channel doesn't tell how much it took. A real waste of time!!
I feel bad it’s 8 one gallon kits, you may have some left but I used 7 to do the whole truck. Hopefully this solved your problem
Did my truck in black and Facebook people are triggered af 😂
That’s not a surprise
How many gallons did this take
5