How to read and write a Bosch EDC16 ECU using BDM100: Read description before watching or commenting
Вставка
- Опубліковано 30 вер 2024
- A guide detailing opening the ECU, connecting the BDM adaptor and reading and writing the ECU within the BDM software. The video shows how to use the original EVC BDM100 tool with a spring probe, and also how to use the chinese BDM100 tool with a soldered connection.
Update 1: This is an old video now, and we actually don't recommend the soldering technique, it's better to spend just a little extra and get the spring probes and a positioning frame, this reduces the risk of damaging the ECU. It's very easy to pull the pads off of the board.
Update 2: The Kess V2 does a very good job of programming the EDC16 over the OBD port, so you don't necessarily need to remove and open the ECU any more. At the time of making this video most tools were unstable over the OBD method and this is why we made this video.
Update 3: For bench programming it's better to use a tool which does not require the ECU to be dismantled such as PCM Flash or Combi loader.
Vehicles with the Bosch EDC16 which we cover are:
Peugeot/Citroen/Volvo/Mini/Ford 1.6 16V (EDC16C3 & EDC16C34), 2.2 170 (EDC16CP39), BMW 2.0 & 3.0 Diesel (EDC16C31).
Check on our website for full details www.hdi-tuning.co.uk
If you're in need of high quality remap files check out our tuning file portal dealer-tuningf...
Hi, I have a Question please answer me - Which Clone or generel is good for OBD Tuning ecu Kess V2 or MPPS V18 ?and the differece Ktag ??when I need Ktag ??
Bonsoir comment allez vous je suis un technicien vivant en Afrique j’aime beaucoup ce que vous faites j’ai besoin de votre contact pour avoir plus informations
Hello there, i'm planning to have a business in ecu remapping, can i ask if where do get the remapped flash file, for example an dpf and egr delete tune. TIA
how much current need to put on ecu?
because by you diagram no read +12error
When soldering always remember that solder will creep TO the heat i.e. your solderingtip. It's best to apply a little solder to your tip and hold the tip on one side of the object to be soldered and apply the solder on the opposite side.
Nice Video, it already helped me a lot. thank you. One thing i still haven't found out is how do i identify which EDC version my ecu is/has?
Search the hardware numbers, or open the lid and look after processor. Edc15 is c167, 16 is mpc, 17 infineon
Hi !
I have vw jetta 2012 TDI
can you help me remaping 2MB flash (delete EGR,DPF,catalytic convertor) ?
Thanks. ..
It is no way to delete the converter friend since exhaust gas runs trough it :) . The only way is to delete your car :) .
HELLO I AM A NEW SUBSCRIBER AND I WOULD LIKE TO ASK YOU IF YOU CAN HELP A
CAR CCOME TO ME AN AUDI A4 2.5 L V6 MODEL 2003 THEY CHANGE THE WHOLE
ENGINE WITH IT PUMPE IT WONT START I HAVE MADE AN IMMO OFF TO THE ECU
THE SAME RESULT IT START AND DIED WITHIN 2 SECONDS ANY ADVICE AND THANKS
OK.Loved the video. very clever.. lots of information.
One criticism [only small]. You should solder ON the same way you soldered OFF ie. by applying the solder directly onto the joint...not bring the solder to the joint on the iron.. it gets what we call icicles' which don't stick and go crystalline..
One thing you didn't really delve into was the advantage of downloading the ECU data and tuning it as opposed to the standard OBDII port method. ie. what am I getting extra that I might want?
bicanoo_ma
Is it possible to set speedlimit with this gear ? lets say I want the car only to be able do drive 40km/h... ?
Harikasin dosdum ellerine sağlık 🏅🏆🛠👍
Can I modify ecm 4 cylinder to 6 cylinder?
no, just 8 to 6
How to read and write full map ECU BOSCH MP5.2? and what kind of tool will be use to do it?
do you perhaps have a ebay link to a trusted seller of the bdm as well as the adapter stand? my soldering sucks.
+Dominique van Wyk I don't link with any of the eBay sellers, you'll just have to check their feedback. I found that all of the tools are the same and come from the same factory, you just pay a different price.
+Steve Lewis hello can you call me please I live in Paris at France thank you
I have a evinrude etec that has ecu with a map that goes rich at 7500 rpm I would like to have the map be able to go to 10000 rpm is this something you could do
No I'm a diesel guy
so actually the kess v2 does the same whiteout opening the ECU that right ?
8100rpm No you actually have some disatvantages in programming
Kess works good but not at all ECU types, for that u need to use Ktag with BDM.
how can you tell if the bdm100 you want to buy is 'legit'... also are there various pogo probes available for different ecus? are they different for CAN-BUS vs K-Line?
The real bdm is around 700 euros plus tax, the fake bdm is 10 euros 😉
The real bdm from EVC is awesome, I've had mine for probably 7 or 8 years now and I use it several times most days. Best money I ever spent.
Hello, how are you doing
Thank you for sharing your enormous knowledge.
I greet you from Mexico. I need help to be able to make immo off to an ECU of 2009 Fiat DUCATO 3.0L that is going to be installed to a 2009 Peugeot Boxer3 3.0L.
You can support me with this even if it has a cost.
THE ECU is EDC16C39 with Eeprom 95640 memory
Email me the flash and the eeprom
@@StevenLewis-HDI-Tuning Hello, how are you doing
Thanks for replying
To which mail I send the information
first you placed red stripe to the left (from your position) and when soldering to the right... how to know which one is correct to avoid frying ecu? :(
yt2011F both are different tools. One is the proper bdm from evc, the soldered connection is the cloned cheap tool from eBay. It's actually dimsport 555pro a complete different tool.
Hi
I have a clone bdm100 without Bosch frame.
My ECU os edc16c3. Can i read and withr without Bosch frame?
Hi
I have a bad ECU edc16c3.
With bdm100 its possible a full backup and install it at new ECU ? Or i need to do more things ?
hi ,is the pin out used all of 10 pin for ME9+Ecu ( i see EVC page #5, ME9 &EDC16 as same and 10 pin without pin# 3 & 4) , in your Video connection to all 10 pin?
i read ecu with K-tag without PIN 3&4 all fine but can"t read EEPROM in Bosch bmsk-p (ME9+)
All time Error connection with BDM100 chines clone , so what is correct pin ? Thanks
hi
i have a edc16c3 psa 307 and i need to immo off . i have a bdm100. can you please help me
Yes, please email me the reads of the ecu
Excellent Video!, just wondering what the software is that you use?
i have an ED0062 CR3.13 2.2L Star A 6461532079/Bosch 0281011158
with a DTC 2339/2347"Check variant coding cheksum data faulty control unit eeprom
error AT has been coded as MT - belongs to a E-220CDI/2005.
what do you recommend ? throw it to the fish ? ;)
hi i have an edc16 ecu from a kia sorento and i purchased the evc bdm100 (original not clone), can you code injectors using this because i thought it would have come with the full software for doing this but so far i have been unsuccessful...
Can you repair my Fiat Stilo ECU?
The ecu SID803 peugeot 407 2.0hdi 100kw can be reprogrammed only with bdm100 or even via. Obd? Thank you
steve !
mesela bir komatsu ekskavator için ecu bosch marka
bu programın içinde aynı yazılım varmı.
hepsi için uyarmı
birde kullandığın aparatların soketlerin adı nedir ?
Can one retrain a 2004 Honda Odyssey ecm with this method and if so can one retrain the ecm to forget about the transmission so it may run successfully as if it had a manual transmission??? Also to trick the ecu to not rev limit before v-tec engauges so that you get the full power band?? I am buying a ecm training module that is similar to the one used here and I want to know before I put in investable money further into this tech
hello ,,, reading and writing the ECU within the BDM software same it ...without needs another device ,,,,only one device BDM100
any ecu can read like that??thnx
Does anyone knows how to convert a bdmtogo file into a Bin file?
From within winols you export the files as separate elements
Hi are the tune maps in the EEPROM as well? What is in the flash memory? And is there a way to read the firmware from the chip?
hello for a wrong engine reprogramming send the program file in the external flash?
can you please put a video on how to use FGTECh Galletto and how to Read Modify and Write ECU Files ?
Would it work without soldering ?
Bonjour merci pour ta vidéo 👍, je possède un renault megane 2 1.9 dci 130 de 2006, j'ai récupéré une map modifié mais quand je veux l'injecté avec mon galletto ça ne fonctionne pas, on me dis qu'avec mpps c'est OK ? Mes codes injecteur et anti démarrage ne seront pas perdu si je fais ça ??
Merci de me répondre please
MORE FLUX!!!
Hi thanks for a very informative and practical video
Can you assist with dpf and egr delete
Hi is it possible to change manual ecu to automatic for vw Passat 2006 model?
I never saved my eeprom before I did diesel scandal fix :(:( now my car sucks !!! would you have a placer where I could find eeprom that would work with my car ? or should I downgrade diesel scandal software first ? in that case how in hell do I do that ?! ?! ? please help !!!
i put the fizical eprom to another ecu, ecu ho is identical model, the car works ok, if dont work with eeprom move, put the flash .
i desamble it from the car, read erase and write till you get it open from aluminion housing
he man when you used the BDM100 from ebay on the ecu you have solder 10 pins plug without space so evc mentioned that the pin 3,4 ,13 and 14 are not used how you can read the ecu
В некоторых местах мутное изображение и закрытые места участвующие в процессе 11.07 ...
Does this tool reads the Delphi DCM3.2AP? Thanks
flashed my edc16c39 with 10$ obd cable + MPPS hundred times never had any problems with injector codes "being lost".
Ok, if you do it enough times it will get you ;)
Got here because of my Ford Focus RS MK2 :)
Vw b5 81kw 1997 1.9tdi where to get good remap file.i have KESSv2 kwp2000plus only
can't solder at all , any other tips got a broken edc16
Hi. Can this same thing be done with Kess or only with bdm100, as I need a to be able to have 100% access just as T4 does for MG/Rover. I'm looking to programme my ECU for when the alarm goes out of sync. Thanks Pòl
Kess KTAG is the equivalent of bdm100 with more capabilities
We have a meter shop I have learned ECM meter how can you explain me
excellent video , do you have any recommendation for power supply to be use for ECU power ?
Most likely any 12vdc power supply. Most home internet routers use a 12vdc power supply. Find an old one that you don't need, or that someone has junked.
Cut the cord that you would normally connect to the router, (unplugged of course or you will get shock 🌩 😲 yourself, catch on fire 🔥 and possibly die 💀).. Separate the wires and then plug it in, next get a multimeter set to VDC identify + and - wires.
@@chrisd1828 Or the power brick always has the output voltage molded into tiny letters on the case of the plug/wall wart to tell you what is up.
So far searching the net BDM100 is mainly used for Diesel cars.Can you use it on any type of car?and if not,is there any other programmer that will do the job?
Thanks
I am repair the Ecm imoblizer and key looking and reset the car
I had a car the Volvo S80 can not be fired, he said workshop volvo ecu is broken, I askfor your help if they can correct me from Indonesia
Yes I cant have a look if you still have this?
Hi - I need a clone of this exact Bosch EDC16 ECU. Please drop me a message so we can connect if you still have it.
I have all available
@@StevenLewis-HDI-Tuning how can i contact you for edc16cp33 ? you can give me a download link
@@StevenLewis-HDI-Tuning send-me a download link please .
@@cristiantanase5184 email through my website
You mentioned connecting to the ECU with an MPPS, is that possible?
HI where i can buy this BDM 100 universal programmer and OBD II cable ???
Hi
Which program i should use to remove for example chain tensioner SELENOID or SAI or rear o2 sensor in audi a4 b6 1.8t?
If you have to ask that, you shouldn't be attempting it.
Hi Steve, I sent you my control unit a few months ago and you programmed me your stage1+ including egr deactivation, what can I say, I've now driven 10,000 kilometers, the consumption is around 5.1-5.4/100km depending on the situation Driving style, it runs great, thank you very much! Greetings Heinrich
And you pay how much for this?
Want to learn ECM reading please can you explain me
hello
i went to volvo bus cluster meter repair in all file not open and show on display check data link broken message
can you please show me how to line up edc 16c2 from citroen jumpy 2005 ?
Hi, can you please send me the diagram of ecu pinout?
This work in SCANIA truck G420 TO? :) please need help!
my car opel astra g 1.6 16v year 2002 I have a problem with the engine computer in service i got a computer of opel zafira same the same mark we the 1.6 16v engine and i was not in my car and with need to go with the clone to ignite car and according to you did they tell me right in the service
i clone simply a opel vectra c , identical ecu , i just move the eeprom chip and flash, the car runs ok. Witf old ecu the car not accelerate
so mppsv16 can read and write edc16 via odb?
What about cutting around the glued edge with angle knife/ box cutter once the corner is started?
On certain ecus the glue is much stronger, so you will need to carefully do this with a Stanley knife, but on this example it has the weak light grey glue so it was easy to open. Typically on vehicles where the ecu is exposed the glue will be much much stronger for example the older berlingo vans where the ecu can get wet.
what is program ecu with MPPS?
Hey 😁☺️🙏
Can ask u some questions !? Please
Hello sir is it read Bosch ME17.0.1
Hyundai Genesis 4.6 L 2008
genessis is not of the list on ktag or kess
How should you reseal the Ecu?
Hello!
can I flash edc16cp33 ECU with this BDM100 ? I wrote the ECU with mpps ,and some error comes, now don't start the car.............or just KTAG good this work?-thanks
thomas Admiral Hi, It's important you stop now before you damage beyond repair. If you can get a full bdm read using this tool or a kess ktag, then I can repair the file for you. Very important that you don't attempt to program anything over bdm without first making a full backup, the OBD file you have is half blank so it's very important not to use that over the bdm 100
hm.thank you so much,,!
Then first open it the ECU, read BDM-port with Ktag or BDM100.--another forum told me,for my ECU don't good the BDM100 tool!-can this be true?
The mpps don't create a backup file on my laptop?
ua-cam.com/video/11dV0OVCRFw/v-deo.html
how did he do it?
Is this a procedure with these tools you can use to clone the BMW ECU/DME as well?
clear micro jajajajaj I
is that clone BDm100 chinese ?
nice job mate verry clear and good example and full English too :)
Hi, do you cloning ECU S320 Benz how much does it cost
Hi, What is the model of the ecu?
Hello sir
ECU contain pull up
Are you a certified trainer or coach ?
good diagnostic amigo excellent
Hello dear friend, i have a question can BDM100 read/write a fiat bosch ME7.6.3 ecu? Thanks
Josue Haro does it have a Motorola mpc555 processor?
Steven Lewis thanks for your replay, i am going to check if it has a motorola processor and i let you know. Thanks and have agreat day.
I am John muturi
I, I have S320 original damaged with water & I have other ECU good one the car started & cuts off how can you help me
What type of ecu is it?
Swap the eeprom over for starters. Or take a dump from the bad ECU and clone it to the new donor one.
Give me traning from nepal
Brilliant just brilliant
What’s price on this tool
Where did you get your bdm100 frame?
Enjoyed your video mate. Keep it up!
pls how can i buy this set of tool
What software u using?!!
what is the software used?
Goog job.
BDM 100 TURN THE KILOMETERS AND ABORT IT DPF AND PDF EGR?
No to miles. Yes to egr and dpf.
@@StevenLewis-HDI-Tuning thank you
Good job, très bonne vidéo concernant les méthodes pour ouvrir le boitier de gestion, lire et écrire à mettre en œuvre sur les EDC16C34....
can you repair tv color , modern type, with remote control?
hahahaha
i need the info for my car dodg journey 2000 diesel 103 kw
Hello brother. Why you Necessary read and write on ECU?
For Tuning
Hi I'm looking for something to write read edc16 edc17c46 from Opel z1tdth and Audi 2.0 cah
Possibly via bdm using adaptera
Hi Steven, very nice Video!!!
Did you work with EDC16CP33 (Opel Vivaro, Renault Trafic 2.0 DCI, Motorcode M9R, 114HP ) ?
Great video keep up the great work