2016+ Infiniti Q50/Q60 3.0T Direct Fit Catch Can Kit Installation Guide by Mishimoto
Вставка
- Опубліковано 20 сер 2024
- 2016+ Infiniti Q50/Q60 3.0T Direct Fit Catch Can Kit, PCV Side
www.mishimoto....
Engineering: engineering.mis...
Facebook: www.mishimoto.c....
Twitter: www.mishimoto.c....
Instagram: www.mishimoto.c....
MODEL: MMBCC-Q50-16PBE
• Direct fit for the 2016+ Infiniti Q50/Q60 3.0T
• Single can mounts in line with the PCV system to separate oil
from air using a 50-micron bronze filter
• Helps reduce carbon buildup on intake valves
• Patent pending billet 6061 aluminum can sealed with Viton™ O-
rings
• Installs in under 30 minutes
• Robust, application-specific bracket mounts the can in a
serviceable location
• Includes pre-molded hoses for simplified installation
• Slotted mounting holes for easier accessibility and servicing
• Defends intake system and essential components from oil blow-
by
• CNC-machined aluminum barbed fittings ensure a sturdy
connection between lines and can
• Catch can has a 3 oz. capacity for longer servicing intervals
• Internal air diverter increases air turbulence to improve oil
separation
• Helps maintain proper octane levels to reduce potential
detonation
• Filter and can are fully serviceable
• Mishimoto Lifetime Warranty
Disclaimer
• Please dispose of any liquids properly.
• Allow vehicle to cool completely prior to attempting installation.
• Mishimoto Performance (MP) is not responsible for any vehicle
damage or personal injury due to installation errors, misuse,
or removal of MP products.
• MP always suggests that a trained professional install all
MP products.
• Do not run the engine or drive the vehicle while overheating.
Serious damage may occur.
• Raise vehicle only on jack stands or on a vehicle lift.
Just installed this kit today. The bracket alone is worth half of the cost of the kit. Installation was 1 1/2 hours because I wanted to route the lines in a way to be as invisible as possible (not just laying on top of the engine).
Did mine today and use your video as reference. Thank you for the post !
still hard to tell where the ports are for the manifold and intake
On "Jules Mechanics" UA-cam he has an install of a different catch can but shows the in and out pretty clearly
Is that a JB4 harness? Terry must be proud ;)
BTW. the top three screws used to mount the can to the bracket can be loosened enough to slip into the mounting slots.
Hey Mishimoto Team - Nice installation video and super nice Q50 Red Sport! 😜
I think the connection through the PCV valve is wrong. Since it does not work when the turbine is operating. oil cleaning only occurs when the valve is open. and when you accelerate it closes. What do you think about this.
Mine came with one of these in it. How do you take it off for cleaning? I watched the actual cleaning video and I knew that with these before already. But how can I just remove and clean this one? Does it just twist off?
The bottom of the can twists off. Or you can remove it from the vehicle for cleaning.
This is an absolute must. My CC fills up pretty quick, I'll just attribute that to my lead foot. Instillation video spot on! Very well made product. Can the XL catch can work on the q50 application? Because I'm dumping mine once a week.
Glad to hear that is working out for you so well. Unfortunately this was a very tight fit as it was, you will run into some clearance issues running the Xl can.
@@mishimoto gotcha. Thanks for the reply!
In terms of maitenance of the CC. Do you have to pretty much go through same process as installation but reverse just to empty the contents when it’s full? How long does it take you (compared to installation to empty it and reinstall again). Thanks!
@@mishimotohow do we empty is there seamless way to empty do the cans just unscrew seems annoying
How has it been holding up ?
Yall should slow down the video when removing a part and highlight it so people will understand what you're removing and installing
Is there any problem with the hose sitting right on the ac hose ? That’s the only way it sits ,I see in the video you guys have it hovering over just a bit , did you guys bend the bracket a little bit up ?
Shouldn't be a problem
Probably a dumb question, but does the car need to have been sitting for a certain amount of time to be cool first? If so, how long
The motor does not need to be cool for this installation. However, it's probably a good idea to wait a few hours from the last drive to ensure you do not burn yourself on anything.
Hey, great product. What did you use to lubricate the o rings. Was it the can of wd 40
For the main catch can o-ring we recommend engine oil as it will be in contact with this often. However the fitting on the o-rings should get a little WD-40 as it will evaporate creating a nice seal.
@@mishimotothis should be a OEM product. Why the f do these car companies never address these issues.
Do I need to add oil or do oil change after installation?
Neither are required. The catch can system is not directly related to the oil system of the engine.
Make sure you wear oversized gloves
This works for 2018 red sport?
Yes, this would work with the red sport as well
Does the q50 3.0t needs 2 oil catch can since it has duel air intakes?
It does not, the PCV system in the car is routed to the driver side intake and requires just the one can.
Mishimoto Automotive thank you just wondering
Fucking idiot what car has 2 oils pans
@@Itsjwzy Just breathe.
Nobody mentioned 2 oil pans?
@@Itsjwzy they said just breath lol
Would you have an application for a 2014 Infiniti QX50? Or can I simply use this one designed for the Q50/60?
We unfortunately do not carry a direct-fit kit for the QX50. You may be able to utilize one of our universal kits with some modification!
I didn't mine 6 months and cant tell the difference at all. My oil still gets black and needed changed at deler. How do these so called "catch cans" catch to dirty oil? Seems like false claims to me
Catch cans will catch the oil vapors traveling through your intake system. This will have no affect on your oil.
@@mishimoto What oil vapors? it's not boiling...... so what is thecan catching??
We would suggest watching the below linked video.
ua-cam.com/video/T-B4VRxAtbw/v-deo.html&ab_channel=EngineeringExplained
@@mishimoto Ahh... ok...thanks you