FeelFree Uni-Track Adapter- Do they work?

Поділитися
Вставка
  • Опубліковано 23 жов 2024

КОМЕНТАРІ • 43

  • @timgaleza8523
    @timgaleza8523 2 роки тому +1

    This was exactly what I was looking for. I was frustrated that my new accessories were not fitting on my FeelFree Kayak. I found your video and ordered the adapters off of Amazon immediately. Thank you so much for sharing !! Great Video!

  • @mkanyuh
    @mkanyuh 3 роки тому +4

    Along the lines of outfitting the moken 10....you mentioned a video or two ago the paddle parks being behind you and they can be a bit hard to use...I agree....try this 1 yakattack rotogrip on the front left track...tighten down until the opening it is angled toward the nose....now you can just lay your paddle blade across the nose...or in the bungy if you want more security and drop the paddle shaft into the rotogrip. Paddle is right there in easy reach ...really easy to put down and pick up....there are a couple different track mounted paddle holders to choose from out there...just have to see which you like....the best part is you can put your paddle down with one hand and secure it and pick up your rod with you right at the same time.

    • @markdoutdoors7965
      @markdoutdoors7965  3 роки тому

      GREAT TIP! Thank you! It is really funny because 2 days ago I ordered the YakAttack rotogrip online and I should have it on Monday. I have a kayak shop 5 min from my house and they carry it in store but I had a $10 online coupon for YakAttack so I just used that to order it. Thanks again for the feedback. Super helpful!

    • @howieziegler3110
      @howieziegler3110 3 роки тому

      Awesome... thanks for that! 😀

  • @dixee6498
    @dixee6498 3 роки тому

    I've been curious about this product for some time now. Thank you for sharing.

    • @markdoutdoors7965
      @markdoutdoors7965  3 роки тому +1

      No problem. Glad it was helpful. Thank you for your comments!

  • @VulcanB240
    @VulcanB240 3 роки тому +1

    Nice, exactly what I was looking for.

  • @AidanWilliams883
    @AidanWilliams883 3 роки тому +1

    I actually learned something today
    Nice video!!! 👍
    Great editing

  • @danielmcnish6555
    @danielmcnish6555 2 роки тому

    Excellent video. Let me ask you this, if I had topload trax could I just take off the feel free trax an install my topload trax? Not sure if the feel free are rivoted or just screwed in. Any info is appreciated, thanks.

    • @markdoutdoors7965
      @markdoutdoors7965  2 роки тому +1

      I have to be honest I am not sure. I’m not real familiar with top load trax and I have never looked into unscrewing the FeelFree rails. Sorry I can not be of assistance. Thanks for commenting!

  • @PanfishingJournal
    @PanfishingJournal 2 роки тому

    Thank you. I've read all kinds of comments with people crying about the feelfree rails. Doesnt seem like a big deal afterall! How tall are you? Thinking seriously about the big fish 120/110. I'm 6'3 and 235 lbs and wanted to have an idea of what to expect as far as leg room.

    • @markdoutdoors7965
      @markdoutdoors7965  2 роки тому

      First thanks for subscribing! I am 5’11. If I were you I would go for the 120 so you have more room. Honestly for me the Feel Free rails weren’t a big deal once I the adapters. Just depends on the person.

    • @PanfishingJournal
      @PanfishingJournal 2 роки тому

      @@markdoutdoors7965 Thanks

  • @jonathanlgonzalezortiz4552
    @jonathanlgonzalezortiz4552 2 роки тому

    What type of rod holder you used with the adapter? Im new to this and don’t know much about rod holders.

    • @markdoutdoors7965
      @markdoutdoors7965  2 роки тому

      I use the Yak Attack rod holders and the Scotty rod holders. I prefer the Yak Attack holders

  • @Manuel_Z_Kayaks
    @Manuel_Z_Kayaks 2 роки тому +1

    Here is a q...
    Do you know of anyone removing the little circles from the floor to reveal the screws and removing the deck to access the inside of the FEELFREE LURE kayak?
    All the cable tubes were shattered on mine.
    I've already figured out how to replace them using the flush mount rod holders holes (Video soon) but don't know if the floor is attached only with screws or glued in.
    Anyone?

    • @markdoutdoors7965
      @markdoutdoors7965  2 роки тому

      I have no clue. I would be interested in hearing if someone knows.

  • @PanfishingJournal
    @PanfishingJournal 2 роки тому

    Liked and subscribed

    • @markdoutdoors7965
      @markdoutdoors7965  2 роки тому

      Thanks man! I appreciate it. I’ll have more videos starting in March!

    • @PanfishingJournal
      @PanfishingJournal 2 роки тому

      @@markdoutdoors7965 That's good to hear. My friend and I are planning on starting a fishing/outdoor channel this spring. I'll let you know if we get up and going.

    • @markdoutdoors7965
      @markdoutdoors7965  2 роки тому

      @@PanfishingJournal Awesome! Good luck!!!

  • @howieziegler3110
    @howieziegler3110 3 роки тому

    Subbed

  • @ffinkral
    @ffinkral 3 роки тому +2

    Just use washers man. So much cheaper.

    • @markdoutdoors7965
      @markdoutdoors7965  3 роки тому

      A washer actually works?

    • @williamammon4899
      @williamammon4899 3 роки тому +1

      Yes , you can square ends with a grinder.

    • @markdoutdoors7965
      @markdoutdoors7965  3 роки тому

      @@williamammon4899 Very nice! If I end up losing any adapters or need more I will definitely keep that in mind.

    • @markdoutdoors7965
      @markdoutdoors7965  3 роки тому

      Thanks for the tip guys!

    • @OfficialFedHater
      @OfficialFedHater 3 роки тому

      What size washers do y'all use?
      $25 is ridiculous for six of these and an o-ring.

  • @Manuel_Z_Kayaks
    @Manuel_Z_Kayaks 2 роки тому

    Dude, you paid $25 for 6 Square washers?
    C'mon!

    • @markdoutdoors7965
      @markdoutdoors7965  2 роки тому +1

      Yup! No regrets either

    • @markdoutdoors7965
      @markdoutdoors7965  2 роки тому +1

      Oh and with the washers I also got little rubber rings to keep the “square washers “ in place included in the $25! 👍🏻

    • @Manuel_Z_Kayaks
      @Manuel_Z_Kayaks 2 роки тому

      @@markdoutdoors7965 I'm a big time DIYer so I'll try to fabricate something before I buy it.
      I enjoyed your video though...
      I just got a Lure 11.5 for 200 bucks! Good condition with all the accessories!

    • @markdoutdoors7965
      @markdoutdoors7965  2 роки тому

      @@Manuel_Z_Kayaks wow $200!!!!’ That’s insane. Enjoy it man!

    • @Manuel_Z_Kayaks
      @Manuel_Z_Kayaks 2 роки тому

      @@markdoutdoors7965 I get a lot of kayaks like that. My fleet so far...
      FEELFREE LURE 11.5
      WILDERNESS SYSTEMS RIDE 115 W/RUDDER
      OCEAN KAYAK TRIDENT 13 FULLY RIGGED
      KIWI ANGLER W/FISHING PACKAGE FULLY...
      HOODOO TEMPEST 120P 2 EXTRA PEDAL DRIVES
      HURRICANE PHOENIX 160 SEA KAYAK W/RUDDER
      HORIZON HYDRA 14 SIT INSIDE
      PRIJON INVADER WW KAYAK
      HOBIE KONA TANDEM
      HOMEMADE KEVLAR SEA TOURING TANDEM 20FT
      PELICAN INTRUDER 12 BOAT
      FISH'N SKI BARGE BAY BOAT
      YAZOO 17FT ALUMINUM JON BOAT.
      I probably forgot a couple but I have a lot of watercraft!