Alternator replacement Dodge Journey 2009 2.4L Install remove Replace how to change.
Вставка
- Опубліковано 29 лип 2024
- Alternator replacement Dodge Journey 2009 2.4L Install remove Replace how to change.
2020 has really shown me I needed to be better prepared for the future, start saving/investing now. Use some of that money U saved by watching DIY videos to plan for the future. Click to get started today.
Etrade - refer.etrade.net/thechoice1pr...
Get 2 free stocks with:
Webull - act.webull.com/nt/3hiKwUuORU2...
Like the Facebook page, find me here. / fixingcarsandstuff
This Channel provides videos for informational purposes only and cannot be held liable for injury, damage, problems that arise when trying to duplicate steps shown in videos. If there is an Amazon link, that is my affiliate link and I will earn a small commission on whatever you purchase.
Outtro music snippet, by: joshwoodward.com/ Good To Go - Josh Woodward
creative commons license. - Авто та транспорт
Ty for the vid....only thing is you should of showed taking of the belt as well
DUDE ! YOU ARE MY HERO! NO JOKE IVE BEEN TOO NERVOUS TO REMOVE THE PULLEY!
this helped me alot! it is the same for the 2010 dodge avenger with the 2.4
WONDERFUL & INFORMATIVE VIDEO!! EASY TO FOLLOW!! THANK YOU!!
Thanks this showed me enough to figure it out. Y’all should also replace the belt since your taking it off if you don’t understand how tensioners and serpentine belts work it’s a whole different video to watch because it’s also pretty deep use the principles from that video and apply them to this one.
Thanks. Very helpful. Able to successfully swap out the noisy alternator with your help. :-)
I think something is noisy i am guessing its the altenator!? was yours making noise before it went bad!?
Any idea how to get the clip for the alternator sensor to stay on properly. I am having a hard time in doing so.
will this be the same for the 2o12 dodge and do u have a diragram for the belt
Do you have videos inn how to test an alternator for a 2015 dodge journey
I need some info on how to remove the alternator/power steering pump mounting bracket for a 2013 Chrysler 200...So far it has been a pain in the butt
thank you sir for the video
And how dos you take the belt off
Do you have a video , on how to replace transmission oil filter on a 2018 dodge journey ?
Thanks for posting this. I just did this on a 2012 Chrysler 200. For those trying that, the alternator needs to come out from the bottom. Which means you'll have to unbolt the AC comp. to move it out of the way first. All in all the worst nightmare of a job I've ever had to do on anything. I wouldn't wish it on anybody. This vid makes it look easy. But it's not a good representation of every 2.4L application...evidently. None the less, it helped me tremendously. Especially trying to figure out what pulley is the tensioner, and how the belt goes back on. Such a fucked up design. Somebody needs to be shot.
It comes out the top 2.4l
Do you have that link to collapse the part? I’m going to attempt to change this And not sure if I will need to do that to the new altinator or not.
Just had a problem last night got stuck in snow, and now after rocking the journey out of the snow the alternator will not charge the battery.. getting low voltage code.. how can I be sure it is the alternator before I go taking it off? Could the sensor on negative terminal prevent charging if it was bad?
how to how to change the serpentine belt on a 2012 Dodge Avenger
do you have any video or info on how to change the coils and plugs on a 2009 Journey ?
You have to take off the air box housing and piping also must remove throttle body for the back and intake manifold for the front
So, where is the link for collapsing that little retainer washer thingy?
Does this works on a 3.5 too ?
Just changed mine yesterday. Be careful of the belt! That thing can be a pain in the butt! If you let it come all the one off.
I bought my Journey second hand and the serpentine sticker layout was gone so I got out the ole trusty flashlight and pen and paper and after my horrible artwork I could put it back on…😂😂😂
Where is the starter on that engine? My car won't crank, I think I need to replace both alternator and starter
Im going to try this tomorrow im not really the mechanic type but its my sons car and i want to make it look like old dad can get shit done so any pointers will be helpful lol
Can't find link for it not sliding down on the bottom bracket
i got a noise im suspecting its the altenator but its still powering the car fine
TOOK MINE TO THE MECHANIC HE CHARGED ME $360 FOR THE ALTENATOR $390 FOR THE LABOUR AND $59 FOR A NEW BELT WHICH I NEVER CHANGED @ 211K NOW .. TAX AND ALL CLOSE TO $950 .. ITS THE MIDDLE OF WINTER NOW AND DONT WANT TO DO THAT ... AND ON TOP OF EVERYTHING I HAVE A NEW 2023 CRV COMING .. WHAT LUCK...
engine looks like Hyundai Sonata 2.4 Liter
jajaja no podia con el conector del alternador che bulodo
ŻLE !!!! Nie pokazałęś najważniejszych momentów, jak zdjąć pasek, jak go założyć
PS - NIE zdejmuje się klemy z MINUSA, tylko z PLUSA !!!!
Really bad tutorial honestly. You completely skipped removing the serpentine belt. I’m brand new at working on cars and I had no idea how to remove it. You hardly even mentioned it at all.
Then when removing the plug on the alternator you use the word “screwdriver action”. What the hell is that supposed to mean? You did something different to remove the plug and you made no clear mention of what it was.
The camera work was alright.
If you're too dumb to understand, then stick to a mechanic. ..