Nerdy Gurdy Build: Part 5; Keys, Keybox Lid, and Sides

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 10

  • @karockgrok
    @karockgrok Рік тому

    Those clamps are the bees knees! I'm putting a few together this evening, thank you!

  • @googleuser3163
    @googleuser3163 3 роки тому +2

    Once again, I can't thank you enough for these. My apprehension towards building my Nerdy has been greatly calmed by this video series!

  • @fremandn
    @fremandn 3 роки тому

    Great! Thanks for putting this out there. Stay safe

  • @aejeff
    @aejeff 2 роки тому

    What did you use on the wheel to make it sound smooth?

    • @thegentleflamingo8540
      @thegentleflamingo8540  2 роки тому

      I used a utility knife/razor blade. You can see it in the Part 4 video.

  • @aejeff
    @aejeff 3 роки тому

    What thickness would do you use to make the instrument?

    • @norasmith2703
      @norasmith2703 3 роки тому

      Most parts are cut from 3 mm birch plywood with a few cut from 6mm birch plywood.

  • @TheCramunhao666
    @TheCramunhao666 2 роки тому

    bom,

  • @martinmendell6399
    @martinmendell6399 2 роки тому

    So the kit that I received didn’t have the keys numbered? Any suggestions on figuring out which one is which?

    • @norasmith2703
      @norasmith2703 2 роки тому

      The keys with the longer key heads are the bottom row, and the keys with the shorter key heads are the top row. Generally, the larger keys are nearest the tuning head and the smaller keys are nearer the wheel. If you use the link in the description to the Thingiverse files, you can find a picture of the two key rows in order. That might help a little.