Thanks for watching! We hope this helps you save some money on a service call or at least buy you some time before you need one! We have new tips every week so please consider subscribing!
Thanks sugar. You and your expert technician are life savers ❤❤❤ I just want to add that my reboot didn't work until I removed the filter and counted to 15 before successfully restarting. You get a subscription for that advice. 😊
Could it be aN old thermostat? Mine is a 27 yr old Honeywell plain round one .. I was wondering if there was a relay problem from the thermostat to the ignition?
Here’s my problem, I have a Goodman electric furnace when it first cycles on it blows coldish air and after about 2 mins it starts blowing warm air and then the air starts getting hot( but it seems to me it doesn’t get as hot as it used to) then I notice right before it cycles off the air slowly get cool again and shuts off. Last year, the heat wouldn’t shut off at set temp on the thermostat, so I replaced the thermostat with a brand new one, I replaced the heat sequencer and I also replaced the motherboard. It turned out that the heat sequencer was bad and fixed that problem. So,what’s going on here with the furnace blowing cold, warm, hot and then blowing cold again? Thanks in advance!
Our furnace (it is in the attic) is blowing hot air occasionally, then might stop, then after a day or two starts to work again. Then it try to start (for 3-4 sec), go off, starts, go off, like not enough power or smth. What that can be? And please could you tell if bi-metal high limit switches are the same or different for Home HVAC systems? If they are different how to find which one you need? Thank you.
Thanks much!! Your Tip helped me .. Noticed only cold air coming from furnace this morning when tuned on.. Kind of worried as it is a cold winter day.. After checking this post , turned off furnace in basement for a minute using the switch next to furnace. It worked , getting hot air again..
Just my luck, this unit has no power switch. I look for the plug to unplug it. And the plug outlet is behind the furnace. Furnace won't move and can't reach around and no space to crawl in the back of furnace. Thanks for your video! Very helpful!
Thanks So much.....I have gone through other videos and couldnt figure out. Cold air was blowingf out of the furnace for past 2 days when temps were in single digits. After checking this post i switched the furnace main switch from the main switch box and then switched it on. And then 5 mins later switched on the the thrmostat. Finally warm air
I have a Rheem Criterion that started blowing cold air. I noticed the igniter stopped working and no gas coming out when blower kicked on. The air filter (kitchen ceiling intake) was dirty so I replaced. Also replaced igniter, limit switch, and pressure switch. I cleaned the flame sensor and checked condensate pan…no water. Also troubleshot the circuit board, appears good. What am I missing?
if your reset it 3 times and it still will not hold for long and , everything on auto and thermostat in the house blinking , I noticed my thermostat on boiler was below 25 the others peoples boilers were like 30 degrees . The HVAC guy changed some parts looks like the ignitor and switch but a few weeks lator the boiler doing the exact same thing shutting down heat and hot water and I have to reset it a few times. Last year it did the same so a guy came then. So twice in 2 years a HVAC guy came and its still not fixed right, so now what? Mother board? or just new boiler lol
Thanks for watching! We hope this helps you save some money on a service call or at least buy you some time before you need one! We have new tips every week so please consider subscribing!
This was very helpful information! Thankyou!!!!
Thanks sugar. You and your expert technician are life savers ❤❤❤ I just want to add that my reboot didn't work until I removed the filter and counted to 15 before successfully restarting. You get a subscription for that advice. 😊
Did you Remove the filter & *then* start the furnace & *then* put the filter (or a new one) back in once it started? or...?
Thank you for this i shut my breakers off for a couple minutes and when i turned ot back on it was working. I really appreciate this video
Could it be aN old thermostat? Mine is a 27 yr old Honeywell plain round one .. I was wondering if there was a relay problem from the thermostat to the ignition?
Here’s my problem, I have a Goodman electric furnace when it first cycles on it blows coldish air and after about 2 mins it starts blowing warm air and then the air starts getting hot( but it seems to me it doesn’t get as hot as it used to) then I notice right before it cycles off the air slowly get cool again and shuts off. Last year, the heat wouldn’t shut off at set temp on the thermostat, so I replaced the thermostat with a brand new one, I replaced the heat sequencer and I also replaced the motherboard. It turned out that the heat sequencer was bad and fixed that problem. So,what’s going on here with the furnace blowing cold, warm, hot and then blowing cold again? Thanks in advance!
I had this problem a few times, blowing cold air. I changed the filter and problem solved.
Thank you so much in this video. I am a single mom it’s big help for me i did my own furnace. ❤️❤️❤️
U did ur own furnace
Thank u I watched so many videos just to get to something simple like this ! ❤ it worked!!! All these steps
Our furnace (it is in the attic) is blowing hot air occasionally, then might stop, then after a day or two starts to work again. Then it try to start (for 3-4 sec), go off, starts, go off, like not enough power or smth. What that can be? And please could you tell if bi-metal high limit switches are the same or different for Home HVAC systems? If they are different how to find which one you need? Thank you.
Thank you for the knowledge, success for "The Air ......" ... Pekalongan, Central Java, Indonesia attended
Thanks much!! Your Tip helped me .. Noticed only cold air coming from furnace this morning when tuned on.. Kind of worried as it is a cold winter day.. After checking this post , turned off furnace in basement for a minute using the switch next to furnace. It worked , getting hot air again..
Just my luck, this unit has no power switch. I look for the plug to unplug it. And the plug outlet is behind the furnace. Furnace won't move and can't reach around and no space to crawl in the back of furnace.
Thanks for your video!
Very helpful!
Thanks So much.....I have gone through other videos and couldnt figure out. Cold air was blowingf out of the furnace for past 2 days when temps were in single digits. After checking this post i switched the furnace main switch from the main switch box and then switched it on. And then 5 mins later switched on the the thrmostat. Finally warm air
Great! Glad to hear you are staying warm!
What if it's an oil furnace not gas. With a Bock water heater next to it. Blowing cool air on the first snow storm of the season😞
How about electrical heater ?
I have a Rheem Criterion that started blowing cold air. I noticed the igniter stopped working and no gas coming out when blower kicked on. The air filter (kitchen ceiling intake) was dirty so I replaced. Also replaced igniter, limit switch, and pressure switch. I cleaned the flame sensor and checked condensate pan…no water.
Also troubleshot the circuit board, appears good.
What am I missing?
Joe did u find a solution I have this exact unit & problem
Thank you 💡💡😎😎
Turn the Thermostat down colder than the house before turning off and on the power. Then turn the thermostat back up for a call for heat.
That just worked, thanks!
Worked for me too! Thanks
Thanks!! Worked for me, and none of the videos I watched mentioned this!
@@bernadettef6884 I have a million view video on my channel. “Before you call for service”
@@bernadettef6884 ua-cam.com/video/rgOnfG62aBM/v-deo.html
Mine is constantly blowing cold air when the furnace is not running and it eventually brings the room temp down. Do you know what can be the reason
Thank you for your informative video. It really saved me a few hundred dollars.
Glad it helped!
if your reset it 3 times and it still will not hold for long and , everything on auto and thermostat in the house blinking , I noticed my thermostat on boiler was below 25 the others peoples boilers were like 30 degrees . The HVAC guy changed some parts looks like the ignitor and switch but a few weeks lator the boiler doing the exact same thing shutting down heat and hot water and I have to reset it a few times. Last year it did the same so a guy came then. So twice in 2 years a HVAC guy came and its still not fixed right, so now what? Mother board? or just new boiler lol
Every time the water is shutting down my heater stops blowing cold air. I think there is the switch.
Large 2 story has a unit downstairs which works fine, other unit I'm attic is blowing cold. Now what??
Anybody,, ,my furnance is blowing cold air only,it wont even ignite. When I turn it on ,it just start boowing cold air,it will not light...
My is electric furnace blowing . And it a blowing cold
My furnace blows cold air for a little while and then stops.
Helpful video, plus that girl is super 😍 pretty.
mine won't go past 68°😞
Mine is stuck at 64
Mine stuck at 63
My house is all electric
This is a brand new unit blowing cold air I heating one room
Brand new unit