Це відео не доступне.
Перепрошуємо.
how to repair and paint bath tub do it yourself refinishing diy painting repairing fixing bondo
Вставка
- Опубліковано 15 вер 2014
- how to repair and paint bath tub do it yourself refinishing diy painting repairing fixing bondo tub sink tile paint epoxy paint shower
MAKE SURE TO WEAR A RESPIRATOR
This little ua-cam.com/users/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
I'm going to look for someone like you to fix my bath tub!! Awesome!!!! 🙂
I agree with some of the guys that it would really look much better with about two or three more coats because your coats were kind of thin coats. It would be excellent after that. Also you are a very young guy so make sure you protect your lungs with a very good mask for long and happy life.
I had a process like this done on ceramic tile bathroom walls. They were PINK and done when the house was new back in the late 50's or early 60's. Tile was in good condition, no broken,cracked, or missing pieces. Just wrong color. I wanted an off white. Two guys came and taped off the walls and woodwork. The tile only cover the first four feet up from the floor. They finished the job ans cleaned up and gone in less than 4-5 hours. That was over 30 years ago and still looks great. Never chipped, faded or pealed off. You'd never know it wasn't white ceramic tile. Shiny like new tile. Was some kind of special paint technique that was new at the time. Very pleased.
Good explain.
What kind of Bondo did you use?
i did this to 3 bath tubs,
it lookes great for sometime, but not for over a year of use.
i agree with eric burns.
in the future i would pay a professional to put a THICK layer of epoxy paint,
2 of the tubs are looking ok, but one of them has alot peeled off after one year of heavy use.
my advice if you want to do this, do the paint on roller NOT the spray, OR change the tub OR have a professional spray the tub that will last for 5 years or more.
i will NOT EVER waste my time and money using a spray.
the bondo repair works GREAT.
That is far from looking great, but it does look better than before.Bottom line is, you get what you pay for. Plus a wet sand would of gave it a uniform and consistent finish.
Billy BK can you use jb plastic weld instead of bond filler
Billy BK
Always have a professional do it. You will save so much time, hassle and money.
Great detail! Thank you. Does the kit have everything you need in regards to cleaning and painting the tub! Would you have liked to had another can of paint to smooth out the finish? The tub looks great.
I have been refinishing bathtubs for 25 years. If you use one of these repair it’s to save a few bucks, you are going to pay thru the nose to have a professional strip off your mistake and do it correctly. Refinishing a tub is something you should definitely spend the money to have it done correctly or pay far more when your repair kit starts peeling.
hi.
i used Bondo Lightweight Body Filler, its a clear or white plastic top, with red and black metal can.
it has a pic of a red older american muscle car with white stripes
you can buy at advanced, autozone, homedepot, lowes, etc.
but any bondo body filler will work.
Billy BK
What do u do if the tub have a little bit of rust
Bottom line with tubs is nothing beats the factory where they put them in essentially giant ovens that bakes everything together.
If you get this stuff, eventually you're going to have problems thus you'll buy it again to make it look new again until it happens again.. in the long run, just get a tub on sale at Home Depot... might need to wait for a good sale. They're easy to install, just need 2 people.
good trick and very helpfull video...
how did you repair the holes on the other tub that you worked on.
It looked like it needed another 2 coats to me. One week to dry that's a long time to go without a wash. Good advice on the chips will give it ago.
Hi, I am able to remodel my bathrooms so I was wondering how has this tub refinishing product holding up for you?
hi,
the tub & sink kits have the special epoxy paint in them.
in the beginning of the video i show the paint kit that i used.
im not sure if any spray paint will work, but this is what i used.
if you have anymore questions please ask.
I know this is an old video but we bought a home and the flippers used this on our tub. It CHIPS everywhere its horrible. Is there a way I can fix it?
I would have replaced the wall tiles prior to refinish the tub. And the Air conditioner off. The last thing you want to do is redistribute the paint fumes through the house via AC recirculation.
Tub looks good though.
I agree about keeping the AC off, however more importantly than fumes is getting the paint on the evaporator coil.
That's amazing baby..like wow
Could you give a list of what you used and where to buy it please?
hi,
if your tub needs repair then use bondo,
i used bondo from advanced auto parts, but you can buy from autozone, lowes, home depot.
sand paper, you can buy from any of those stores mentioned above
i bought the tub refinishing kit from lowes, but home depot should have also but diff brand
i would recommend putting fan into bathroom window to remove the smell and paint particles in the air
and put drop cloths on every surface so that the paint particles do not stick to floor or toilet or sink.
Can natural cleaning products take enamel off the tub? Because I used method products and now my tub has rough spots when I wipe over it, it now makes holes (it tears apart) in the cloths like old rags. And I live in a complex so I need to let them know. But I'm curious to know if the cleaning products could of done that. Because if it did, then I would have to pay for the damage that I didn't know what not to use on my bathtub. Thank you for sharing this and hope for an idea of what could cause this roughness to happen. ☺
Jacqueline Peters your tub is wearing out, they don’t last forever, when the porcelain on the steel tubs wears thin it will start to feel rough.
Fyi: steel tubs are coated with porcelain, you may want to look at getting your tub professionally reglazed DYI kits barely last 3 months before they start to fail and peel, a professional reglazing job will last over 10 years if you can find a real pro.
you lost me at 1 week to dry
Fnasser was
Fnasser uu
cool, thanks
i wanna see you do a car
What type/brand of spray paint works on tubs?
+Brian Anderson
Homax (TOUGH-as-TILE) Tub & sink Refinishing Kit
if u live in Phx az call me I'm the best tub repair technician 15 years of experience 6023280463 matthew
I'm telling you, please dont do this. Let a professional do it
IDK why anyone sprays anything on a tub when the roll-on epoxy repair kit is $25 at home depot.
How much would it cost to pay someone to restore my bathtub? Would you have an idea??
Go with someone like miracle method. A lot of the stuff this guy is doing is going to fail within a year. Have a professional do itm miracle method guarantees at least 10 years though most last longer, give a 5 year warranty where they will fix things for free and will not only do all repairs and refinish it the first day but they will come back for a 2nd day to wet sand and polish your tub to make it look brand new. It's about 500 but you get what you pay for with things like this. They provide excellent customer service as well
Plus it only takes 2 days and not a week and it looks a lot better than what he did.
Looks very spotty to me.
Mike Fix its not perfect like from manufacturer, but im satisfied with the way it came out.
one problem i had was that a tenant moved in before the 7 days of drying was up, in certain places near the drain the paint chipped or came off.
i can not redo until tenant moves out, as the unit only has one bath and tenant will not be ok without a working bath tub for 7 days.
Billy BK
+Billy BK lol. yea you could do it with Tennant there. get a professional to do it with real materials not this cheap crap that peels in a month. you will regret using it trying to save a buck because you will have to pay a professional to strip that crap off once it starts peeling and then reglaze it professionally. those kits don't even give you most of the stuff you really need. you need real 2 part epoxy primer and real 2 part urethane topcoat and you can use the tub the next day. they use the aerospace epoxy primer my company buys on oil rig drill bits and silane adhesion promoter, acid etching is the old school way. but very dangerous not many professionals use it anymore and it is now obsolete
Can I use
USC Feather-Rite Quart
Item #50755ZP Brand: US Chemical ?
USC's best-selling lightweight filler;
superb spreadability, workability
thanks
yes, that will work also.
Did you ever discover a thing we call a "respirator"?
There are many things wrong with this video. As a professional refinisher from a very good company I can tell you that we come and fix these all the time plus the final product of this really didnt look good. Your bondo mixture also needs to have a lot less hardener in it. Faster isnt always better especially when it comes to bondo. If you want it to dry quicker, put a heat gun on it, flash it with cold water and then hear gun again. Never put too much hardener in it. Save yourself the hassle and have a professional do it.
Painted tubs make look good at first but they do not last long.
Baby Boo
Exactly! You have to have a professional do it. These kits are crap. Our company has tubs that have lasted 20 years
need at least 3 more coats...
how many times is he gonna mention cars. clearly no one is here for that
That product does not work, and that is some horrible bondo work. I hope you're not doing this for customers
THIS IS TOO LONG AND THE AUDIO IS BAD! 12 MINUTES TO WATCH! REALLY!?