Це відео не доступне.
Перепрошуємо.
motorcycle S&S carburetor fix
Вставка
- Опубліковано 28 тра 2015
- www.sandiegocus... - motorcycle S&S carburetor fix.
The S&S carburetor is used on the Ironhorse, Big Dog & many Harley-Davidson models.
The carburetor work was done by Curtis of Wild Steed Worx located in El Cajon, CA.
If you're into custom motorcycles, get a free subscription to our popular motorcycle blog at:
www.sandiegocus...
Also be sure to visit our motorcycles for sale page at:
www.sandiegocus...
Subscribe to this San Diego California Custom Chopper UA-cam Channel - / pilotjoe7
motorcycle S&S carburetor fix
Why not take the air cleaner bracket off?
It's 3 screws
He did , edited out.
😒 Too Much Work 😒
Clearly he likes fighting with 😆
What was the old jet size vs. the new jet size?
29.5 intermediate jet for that size motor is too small at most altitudes if its had any performance mods done to it i.e. cams, intake, exhaust
I strongly thread locker on the air cleaner plate screws. Sucking one in will ruin your day!
Huh. I ride past that shop all the time. Might have to stop by.
Great Video...
How important is the rubber boot on the accelerator pump plunger?
Mine is pretty whooped.
My 73 Ironhead sportster with super E seems starved for fuel at high rpm/speed. Gonna try high flow petcock next.
I have about as much knowledge of motorcycles as I do of the DNA strand and its make up! ZERO! But I'm gonna try and take my carb apart and mess with it and see whats up. I live in a high elevation and my 2001 Indian Scout coughs and splutters like a chain smoker with pneumonia BUT I bought it from a bloke up here so I assume it was already tuned for this altitude. Beautiful bike just runs like a big......
Iv got a 127" and have a stumble wen you try to hold a set speed but wen ur in the throttle it run perfect any thoughts I got a 032 intm jet and 70 main
Maybe up to a 73 or 74 jet or a mid-range fuel circuit. I assume the stumble is at highway speed. and it is sucking more air and less fuel so when you crack the throttle more it pulls more fuel . My shovel will run a 70 and better at 68 so 70 is small I think for 127
Check out this 128 shovelhead (yes you read it right) ua-cam.com/video/Me40j59H3C4/v-deo.html
@boosted12
That’s a lean stumble
Your 32 sounds good but unless you have a thunder jet you’ll need a 76 main minimum
Dude....use bigger flathead on the 3 screws for the air cleaner backing plate and you won't get screws that look like those. I changed mine out to stainless SHCS.
Is it me or was it to hard to take out the five fasteners to remove the support/backing plate? Also hiw about that black O ring sitting in the bowl?
never said what main jet size was
Good ole Kaptain,he is a good man
I need the video on how to take the air cleaner cover off
I see one big issue already no o ring o on the stem that goes into the carb body from the accelerator pump
The observer said "choke" but the S&S has no choke, it has an enrichener . And no main jet size mentioned.
All this time you could have removed that air filter bracket to get that intermediate Jet! dahhhh!
Hi sir i have a iron horse chopper how do i remove the outside chrome cover on 111 carb. Does it just pull off? I see no screws?
if it's the OEM car cover just look behind it and you should see three bolts that hold it on two on either side and one on the bottom
Hi, I got S&S 124, stumble on 1 and 2 Gears, you can help me with the Jet sizes ? Thank you.
I've seen 124's with 36 intermediate jet. 78/82 with the main
if the needle and seat aren't sealing and allow fuel into crankcase, would it idle ok without flooding?
HuH 29.5 / 74 range that jet range is way to small for a 111 engine
Did that o-ring fix it?
Yes ... working great now!
I love doing things the hard way to lol
I have a Question for anyone who might know, I own a 08 K9 117 I had the bike on the battery tender it was fully charged I turned the key and nothing happened and no lights also. So I decided to see if battery was dead and touched both post with a wire and it arced. I turned the key again and the bike started right up! thanks
Please please stop doing this, shorting the battery is not good for the electronicss. Newer bikes have computers like cars. I blew up the computer on new ford ranger installing a new radio. Electronics are also sensitive to ESD.
I've got a Tillitson on my shovel.
That dude all breathing hard and stuff,,
jocrp6 dude with the camera wasn’t his idea I’m sure.Thats why they don’t usually let customers in the garage.lol
WTF
Tell that armchair quarterback to be quiet
Boy, that was about a waste of time....No information....
+James Preneta
Thanks for your opinion. With thumbs up vs down now at 29 to 1, looks like most do not share your opinion.
Well...we do know the proper jet size now? Might I add....I've been using various S&S products for about 40 years....they DO make it clear their stuff is intended to be installed by someone with mechanical skills....I've had pretty good results by actually reading all the directions before I start the job...AND....any changes in exhaust...like straight pipes....will cause carb/fuel issues...all my 4 bikes ran better with some sort of muffler system...Ironhead Sportys, Knuckle.....
Pilotjoe7, At the end it was said that the jets were upsized.....What size did you go to on both the main and mixture screw?