Toyota hilux 1kd engine turbo replacement ( P0045 turbo/supercharger boost control solenoid open)

Поділитися
Вставка
  • Опубліковано 16 лют 2022
  • In this video I show you how to remove the turbocharger and boost control solenoid from the 2006 toyota hilux 1kd engine.
    was code P0045 when start the car no power engine even can't accelerate
    it broken solenoid inside magnet that why getting p0045.
    no need to replace whole turbo. you can get it after market just solenoid only .
    Turbocharger :amzn.to/3RHl0td
    1/2"socket set:amzn.to/3ynrczG
    3/8 socket set:amzn.to/3ec5lnZ
    Ratcheting Wrench:amzn.to/3ynbbdb
    plirer:amzn.to/3CFoTKT
    5-Piece Hammer Set:amzn.to/3Mc1tA1
    LAUNCH X431:amzn.to/3rAx9FV
    if you are looking for help with your Automotive Repairs, Automobile Installations, Mechanical Repair or Adjustment, please head over to carfix for information on it
    Please drop your comments and subscribe if you like my videos. Thanks for all the support
    .*Disclaimer
    We are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not carfix
  • Авто та транспорт

КОМЕНТАРІ • 19

  • @garyhews
    @garyhews 2 роки тому +1

    Wat was the purpose of scanning first before starting?

  • @intellsoft
    @intellsoft 2 роки тому +1

    Can't find this on honda accord 07

  • @mothomphisegopolo6898
    @mothomphisegopolo6898 2 роки тому +1

    What causes car to drain power to battery when ignition is off

  • @hosiemali4562
    @hosiemali4562 2 роки тому +2

    I am a mechanic this video helped alot

  • @jasonsloan26
    @jasonsloan26 Рік тому +1

    Do i need to drain oil and coolant before removing? Great video thanks.

  • @kevinbalkwill8426
    @kevinbalkwill8426 Рік тому +4

    I kept getting the same code and just replaced the actuarator that did the trick looking like the actuarator was the issue not the turbo

  • @laurenbalsillie
    @laurenbalsillie 6 місяців тому +1

    Hey, I’ve got the same issue on my hilux. Ivr pulled the solenoid off and the magnets are fine but the armature is wobbly, is this my fault? Or is that relatively normal. Cheers

    • @carfix1993
      @carfix1993  6 місяців тому +1

      Most common problems whole actuator, wobbly is normal

  • @driftgxdly
    @driftgxdly Рік тому +1

    I’ve replaced the turbo en all in mine but now it’s showing that ( throttle open switch =OFF) when I check the status of everything on a diagnostic tool…someone plz help🙏

  • @rrea1
    @rrea1 Рік тому +1

    How did you test the new solenoid with the engine off, i have an issue where mine does not get electricity

    • @maxwellmarange9680
      @maxwellmarange9680 Рік тому +1

      Hi did you manage I hv the same problem?

    • @carfix1993
      @carfix1993  Рік тому

      Yes

    • @rrea1
      @rrea1 Рік тому

      @@carfix1993 haven’t gotten an answer to the question i asked. If you could kindly reply to it

    • @raynoszs5267
      @raynoszs5267 Рік тому +2

      @@rrea1 What’s the code you’re getting?
      Did you check with a multimeter and saw there’s no power?
      To test without ignition, you can connect the wires and actuate it via Techstream software and a mini VCI adapter

    • @rrea1
      @rrea1 Рік тому +1

      @@raynoszs5267 the code is 0045, thanks for the suggestion.