Polaris Magnum 330 Overhaul

In this episode I strip down a 2004 Polaris Magnum 330 that I have recently been given. It has been sitting unused for some years so is in need of work to get it back to a useable condition. Episode 1
Music from UA-cam music library:
The Nexus Riddim by Conrad OldMoney
Love On Wings Riddim by Conrad OldMoney

[@seth364]

This is fantastic. I’ve got the same bike and faced MANY of the same issues.
Thanks for the video!

[@bmcoutside8446]

seth364 Thank you. I’ve been a bit lazy with part 2 but I’ll upload it really soon!

[@seth364]

BMC Outside Hehe, no worries! Mine has been a project ever since I bought it.
One quick note, if you notice oil leaks, watch the hoses at the radiator. The OEM setup was prone to deteriorate and leak. I replaced mine with the braided steel hoses and haven’t had problems, EXCEPT for the removal of the dang things. The oil cooler radiator is particularly weak at the joint and if the threads to the hose are on tight, you might just do what I did and accidentally rip the radiator top in half trying to get the dang hoses off.
Anyways, been a pretty decent little bike. Hope you’re enjoying yours.

[@NorthwalesBushcrafters]

Nice one matey ( subbed for you 👍)

[@bmcoutside8446]

Northwales Bushcrafters Thank you 👍

[@tyronehogan3612]

Where could I get all parts to rebuild? I need wiring harness and all.

[@johnlampe3]

Good video but certainly wouldn’t of hurt to spray some WD-40 before twisting bolts and screws

[@coreyboles8906]

What causes the drive belt to flip over or come off even? Any way to tighten it

[@eliegermanos2558]

Is there a part 2 ?

[@chriservin4022]

Hey man I have the same quad and need some help figuring out what’s wrong with it any chance you could help?

[@jorcktheoutcast8007]

I know its 11 months later but hey I'd watch a part 2

[@bmcoutside8446]

Part two and three footage is all recorded, I just have to find the time to edit it! Part two will be ready really soon!

[@jorcktheoutcast8007]

@@bmcoutside8446 sounds good to me, I have notifications on for it whenever it comes 👍

[@nicholasbrophey1145]

@@bmcoutside8446 carb rebuild is what i am hoping for, just bought 2004 330 magnum 4X4.

[@TeslascopeMobile]

Is part 2 coming? ;) I’m in need of replacing the spark wire but can’t figure out where the ignition coil end is mounted. I’m hoping to not have to remove all the front panels. Any thoughts?

[@bmcoutside8446]

Parke Gregg Yes part two will be along very soon.......at last! I’m not sure off the top of my head but I’ll have a look for you and let you know my findings!

[@TeslascopeMobile]

@@bmcoutside8446 I've since found it under that access plate in the front under the handle bars. Would still like to see a part 2... :)

[@Tommysunny93]

Any update on part 2?

[@jackdipper7686]

Part 2 dude

[@louisdel30]

I have so many questions

[@bmcoutside8446]

Fire away! I’ll do my best to answer but it was a few years ago now!!

[@hunterpoucher3938]

Mine doesn’t want to go into park or high do you know how to fix that

[@bmcoutside8446]

Hunter Poucher There should be a spring attached to the rear brake pedal, that pulls on a shaft when you press the brake down, which allows you to engage park and high. The spring could be over stretched, if so try pulling the shaft down by hand and engaging park. If it works you just need a new spring.

[@hunterpoucher3938]

BMC Outside thank you

[@caseyolson8713]

This video would be so much more helpful if you actually said what you were doing and what tools you’re using. Just my opinion

[@bmcoutside8446]

Casey Olson I’m planning to add some voice over for part two, not the whole video, just for the parts that aren’t obvious what I’m doing!

[@greywolves9326]

21:50

[@benduker6839]

??