This is the same exact bike I have, cant wait to see any potential mod videos! I can pretty much guarantee I weigh more than you do so my gps on my phone says I top out somewhere in the 20s. Id probably end up following all your build videos in this series because even if I go with a real moto. I love love my little mini. Iv'e heard there is a variant of the 150cc that is bottom mount that will bolt up with minimal modification. They only time I've seen or heard of one however is when someone in the facebook group says "I FOUND ONE!" or when Alan from cajun said he'd start carrying it as a kit, but I never heard anything from em about having it after that. Defiantly gonna be looking forward to your vids on this bike.
@@GhettoWrench you could try a non stretch tire so you are using just the center of the contact patch like a sport bike, depending on the room and you already have a 10 inch Douglas rim on the other bike if you need the extra room to mount a non stretch tire and swap it. If I remember correctly the long case is pretty much touching the 12 inch rim why we ran stretch tires. So a actual non stretch 10 should equal the 12 inches stretch tire. Looks fat but running the skinny contact patch
Other thing I would be curious about for the 50, rolling wrench sells a lightweight flywheel for the 150. I see you have a lathe lol. Matt says 223 grams shaved off. Iirc. Maybe can help spin the 50.
@jeremyhope6869 that is a damn good idea. I have seen the mini bike crowd do this. These GY6s are used in some pretty heavy things like 4 wheelers etc. That weight kinda acts as a flywheel to keep it going. Our bikes don't really need it. Sold!
@ZCRAIZED1 no I don't. Sorry. Not much to buy. The short-term axle is too short unless you open the center hole up with a lathe. Just want a decent shock.
Allan is A Good Guy Lol I'm Friends With Him On Facebook And Have Met Him At The Smoky Mountain Small Bore Rally 2023 When We Were At The Bike Show With My Friends then 17yo kid who fully customized his ice bear maddog to a 150cc he did all the work including wiring and full paint by himself! Link for video ua-cam.com/video/qgwjy4RIR-c/v-deo.htmlsi=k-fo6yoZE2EbVYa4
I have 2 from him. The 1st one took 4 days from Louisiana to Florida. The 2nd took 9 days I think. Both times he said he would let me know when it shipped. Both times I was surprised when the truck showed up at the house. LOL. Luckily I was home. But the driver said he would have just left it in the driveway if no one was home. WTF.
That's just the price it says online. Doubt you gonna get shipping to UK from them tho. LOL. Yall have an icebear dealer in UK? Or maybe Icebear is a US thing. You get me a Italiajet Dragster 200 and I will get you one of these.
This is the same exact bike I have, cant wait to see any potential mod videos! I can pretty much guarantee I weigh more than you do so my gps on my phone says I top out somewhere in the 20s.
Id probably end up following all your build videos in this series because even if I go with a real moto. I love love my little mini. Iv'e heard there is a variant of the 150cc that is bottom mount that will bolt up with minimal modification. They only time I've seen or heard of one however is when someone in the facebook group says "I FOUND ONE!" or when Alan from cajun said he'd start carrying it as a kit, but I never heard anything from em about having it after that. Defiantly gonna be looking forward to your vids on this bike.
Ya my buddy had one and only went 21mph! When new. Crazy. It is going 54mph now tho. I really like the 50s. So fun to play with.
Oh cool! We look forward to continuing! I wonder how much it will accelerate to in full tuning.
That frame and rear setup would be a good start for a drag scoot with wheelie bars.👍
Im watching to see where it goes.✌️
Yea baby
I subscribed 😂 can't wait to see what you do to the beast 😅
Thanks. I really think skinny tires are a key to speed on underpowered bikes, but I really don't want to lose the cool look so I am torn. LOL
@@GhettoWrench you could try a non stretch tire so you are using just the center of the contact patch like a sport bike, depending on the room and you already have a 10 inch Douglas rim on the other bike if you need the extra room to mount a non stretch tire and swap it. If I remember correctly the long case is pretty much touching the 12 inch rim why we ran stretch tires. So a actual non stretch 10 should equal the 12 inches stretch tire. Looks fat but running the skinny contact patch
@@jeremyhope6869 oh ya. That would work
Other thing I would be curious about for the 50, rolling wrench sells a lightweight flywheel for the 150. I see you have a lathe lol. Matt says 223 grams shaved off. Iirc. Maybe can help spin the 50.
@jeremyhope6869 that is a damn good idea. I have seen the mini bike crowd do this. These GY6s are used in some pretty heavy things like 4 wheelers etc. That weight kinda acts as a flywheel to keep it going. Our bikes don't really need it. Sold!
Just found this channel love every bit of it just my gen 4 a month ago
Awesome. Thanks
This is a learned way.
Do you have a video of changing the single shock mount and a list of parts, i am trying to figure out what midel to buy.
@ZCRAIZED1 no I don't. Sorry. Not much to buy. The short-term axle is too short unless you open the center hole up with a lathe. Just want a decent shock.
What webiste you buys these from?
@CuhJcVaping just search cajun maddogs. Website is lame, but the store is legit.
😂😂Alan doesn't like you?? I will be sure to ask him next time I see him😂😂
That was supposed to be a joke. LOL. I think Alan was offended. Tell him It's cause I use electric pumps and he loves vacuum pumps.😜
Allan is A Good Guy Lol I'm Friends With Him On Facebook And Have Met Him At The Smoky Mountain Small Bore Rally 2023 When We Were At The Bike Show With My Friends then 17yo kid who fully customized his ice bear maddog to a 150cc he did all the work including wiring and full paint by himself!
Link for video
ua-cam.com/video/qgwjy4RIR-c/v-deo.htmlsi=k-fo6yoZE2EbVYa4
@ORIGINALCONCEPTGARAGE 100%... I was just messing with him. 😜
@tedowen409 oh I know lol 😆 😂 🤣 😅
What website did you order through?
Cajun Maddogs. Check out the video before this one and I show how to order it etc...
where did you buy this?
Cajun Maddogs
Nice of them to give parts or i got it wrong?
LOL... I wish. No man, I didn't even get a discount. But his shit is already priced cheaper than anyone else.
How long did it take to come in?
@isaacavalos8478 My first one seriously took 4 days to get and I am in florida. That one took 2 weeks! Now I hear guys saying longer. Ugh
Considering purchasing one through Cajun how long did shipping take?
I have 2 from him. The 1st one took 4 days from Louisiana to Florida. The 2nd took 9 days I think. Both times he said he would let me know when it shipped. Both times I was surprised when the truck showed up at the house. LOL. Luckily I was home. But the driver said he would have just left it in the driveway if no one was home. WTF.
What website did you use?
@@MoH_Dank www.cajunmaddogs.com/
@@GhettoWrench thanks man I appreciate it, How reliable has it been?
@@MoH_Dank stock is plenty reliable. Like all things... all the stuff that messed up is the stuff I messed with. LOL
@@GhettoWrench Good to know, I'm new to the whole scooter thing so kind of just wondering in the dark so far but these Maddogs look nice
@@MoH_Dank they are def the coolest looking of the "china scooters"
Not a bad deal at all
Cajun is giving these away compared to other places. And no BS fees. Alan shoots straight.
Is it better than the Honda Ruckus ? 🤔 naaa it's Chinese
Not even close. You get what you pay for.
Is that the correct price we can't get them in the uk Biden must be close to China 😂 or is that a special American price 🤔
That's just the price it says online. Doubt you gonna get shipping to UK from them tho. LOL. Yall have an icebear dealer in UK? Or maybe Icebear is a US thing. You get me a Italiajet Dragster 200 and I will get you one of these.