Knife Making - Knife From an Old File
Вставка
- Опубліковано 25 чер 2024
- Handmade knife from an old file. There I try to show all steps of this knife making.
00:00 - observing an old file
00:14 - cutting off the handle
00:32 - annealing the file
00:41 - glueing the templates
00:50 - cutting the file with angle grinder
02:18 - shaping it with belt grinder
03:20 - driling and shaping hole
04:19 - making bevels
04:52 - sanding with dremel
05:18 - hardening and tempering the knife
05:37 - fine grinding
06:21 - sanding the blade
06:44 - sharpening
06:58 - knife overview
Thanks for watching!
Leave like, dont forget to subscribe if you enjoy watching.
Please share this video with friends or anyone who might be interested!
★You can buy all my works at my ETSY shop: www.etsy.com/shop/KossWorkshop
●Follow me ●
Twitter ▸ / koss_workshop
Facebook ▸ / kossworkshop
Instagram ▸ / kossworkshops - Навчання та стиль
Amazing work as always. I just missed some brass touch Lol. Just kidding
maybe next time =))
@@Koss-channel how about an epoxy resin handle???it will look soo cooool
@@DrparthS that would be epic
@@Koss-channel its the same size shape as black one right???
@@Koss-channel 8op
I wish someone would make a file out of an old knife
I made a pallet out of a coffee table I found by the side of the road.
😂
This is the first time I've seen the teeth of the file used as the grip/handle.
Beautiful and practical at the same time. Brilliant!
Absolute master at this . The lines on that knife are sublime
Yeah, it's stellar work and no mistake. Gorgeous :)
Never seen such an even cut with a grinder
Koss, you were one of the people who helped me get into making knives, and eventually to start my own knifemaking channel on UA-cam! So big thank you, and I always love seeing your work. Keep it up
I would love to start making them, how can I start? What do you recommend?
@@amtvcl I recommend you watch as many of kisses videos as you can, as well as green beetle red beard ops, dies in every film customs, and any other videos you find. They don't have to be tutorials, just observe. Then I would grab as many tools as you have and see if you can replicate what they've done with your own tools. On my channel I use a lot of common tools, so maybe check it out. And don't be in a hurry, getting as good as koss takes years, im 2 or 3 years in and I'm still getting the basics down
The most beautiful file knife I've ever seen
That right there is one B E A U T I F U L knife ( best use for a file I ever saw
other than it's original intended purpose ) !!!!
One of the best looking file knives I've seen.
while every knifemaker is using that texture on the blade, you managed to keep it on the tang for a reason. I love your critical thinking.
Kawał ładnego noża. Podoba mi się.
Супер лучше не придумаешь удивительный нож умница
love it, and this has convinced me that I can use thicker steel for knives. Im a welder and amateur knife maker but the thinnest metal I can usually get is 1/4 inch steel but man that blade looks amazing with that thickness
Koss делает пожалуй самые оригинальные ножи
OMG a knifemaker sharpens his knifes correctly on UA-cam! WOW!
Now you have a knife and a file all in one!
Keeping the file surface, for the grip, is a nice touch. Great idea.
Most unreal blacksmith work,no blacksmith tools but engineering workshop machinery.
I like that the files that he uses to file the file into a knife will inevitably be turned into a file knife lol
Reminds me of the big knife Jimmy Diresta made. Using the file texture on the handle is such a great way to keep and add the style. Looks so rugged and functional. Definitely appeals to the manly man and mechanical/machine style. Love Jimmy’s knife and I love yours. Like many comments say, your lines/design are amazing. A knife company commissioning a design from you makes perfect sense to me.
That is one of the coolest knifes I’ve ever seen. Brilliant. 😍
Absolutely fantastic. Love the handle
Отличная работа!
Привет из Беларуси!
Oh my! That is absolutely beautiful work!
Such a cool take on a knife from a file. Great job!
I love the shape of this one from tip to butt. Very Classy the way you blended the choil, ricasso and bolster! Looks well balanced too. Thanks Koss for another fabulous build! Happy Holidays!!!
Gorgeous knife. What a great idea !
By far the nicest file knife I've ever seen. I never thought to leave the teeth as grip texture.
Wow, I wish it only took me 8 minutes and 4 seconds to make a knife like that
Well done, wonderful and perfect, you are a great craftsman and engineer, respect from me, from old BG.
I think that may be the best looking knife from a file I've seen yet.
Amazing work, looks fantastic! 💖
Отличная работа . Я в 1992 подобное делал . Только немного по другому . На пятикоординатном искравом станке . Без отпуска . С последующим покрытием хромом , после полировки . Целый техпроцесс . Через две недели начальство запретило выдавать напильники без сдачи старых .
Beautiful shape. Very elegant.
Beautifully proportioned!
I would love a set of kitchen knives like this.
It's fascinating to⌚a master of one's craft, especially when it comes to repurposing old tools!
A beautiful knife again. Like the shape. Great work!
It’s perfect and no pieces to break off or to damage.
Nice. Came with scales already installed.
Really nice ty iam 65 with 17 year old we will try this
another masterpiece!
Best I've seen. Nice work.
You are too good at it.
That is a super unique way to make a file knife, very original and probably one of the coolest that I have seen. Probably going to have do this myself.
Very nice indeed. Enjoyed watching this.
Another beautiful and fascinating project. One thing i would have done, especially after after watching your thumb sliding, is some mild thumb jimping.
Allni can say is superb
Wow.. that's a beautiful knife for sure
I like the hand-filed hand-file profile.
I LOVE the handle. Thats genius right there dude.
Perfect knife, great knife 🗡️
F badass! Pure bliss to watch! Thank you so much
Beautiful!!!
Beautiful work
This knife deserves a leather case ! Amazing work!
remarkable work Koss.
Wow , I am amazed with your skill set. Keep going.
ideality in simplicity👍🏻
He makes it look so easy.
Good work!
Yes, is very good!
You are the business when it comes to art, craft, design and practicality.
Yet another wonderful piece of work!!!✌️👍🔥
Amazing job. Keep them coming
I love this one, very much.
That a good style ... really enjoy watching you made that knife
Like the idea for making the handle!!!
I like this knife the most. Nice work!
very good work. I have yet to make a knife with that steel. very good results and edge retention are obtained on the knife. Cheers
Simple but impressive 👍👍.
simply beautifull
Thats beautiful
best 👍
Masterpiece!
Perfect work
Amazing work lovely
That is absolutely beautiful and I love the simplicity of it too. I'd buy one in a minute from you.🤟🏻
Great work..
That is the nicest "file" knife I have ever seen.
Excellent job 👏
I can see a Hamon in that ,good work
Master piece
Frikkin badass!!!
Very good job. Love the textures. Keep it up.
Hi, teatcher. ) Very good job. Thks.
beautiful knife
What a nice knife and I love the handle. You certainly make it look easy, which I know it’s not.
imagine a full kitchen set like that?? you could safely tell friends and neighbours they won't get a set like that in ikea 😁
That's a beauty
Beautiful
And by the way, you make really remarkable knives.
Man wish i was as good as you wit them tool man
I am very like this knife.
Отличная идея. Отличный нож.
Какой классный нож получился!!) Отлично!
Very nice knife simply the best
Заворонить надо ещё, да с рисунком, ваще 🔥 будет
maravilloso trabajo
Great looking knife
Absolutely gorgeous~! Very well made :)
خیلی قشنگ بود ممنون 🇮🇷🇮🇷🇮🇷👌🏻👌🏻👌🏻 very nice
Fantastic