Wrenching Gone Wrong PT.2 - Squarebody Crossover Steering
Вставка
- Опубліковано 4 жов 2024
- Have you ever bought some car parts and decided to install them without doing any research beforehand? Well I did, and the result is this multi part series. This all started with what should have been a simple half day install of a crossover steering kit...and unfolded into 8 days of hilarious frustration and self realization.
FOLLOW ME HERE:
IG: / mister_zachary
TikTok: / mister_zachary
GET MY CAMSHAFTS HERE:
bit.ly/BFDChop...
(Texas Speed BFD Chop Monster Camshaft)
Download OnX Offroad : webmap.onxmaps...
LIKE MY SHOP FLOORS? GET 20% THE SAME EPOXY GARAGE FLOOR KIT:
www.ghostshield...
MY PARTNERS:
Texas Speed & Performance: @TexasSpeedPerformance
Gearstar Performance Transmissions: gearstar.com/
QA1: @QA1TECH
Smeding Performance: @smedingperformance154
Holley Performance: @HolleyPerformance
Vibrant Performance: @VibrantPerformanceTV
Garrett Turbochargers: @GarrettTurbos
Tick Performance: @TickPerformance
Driveshaft Pro: @Driveshaftpro
Squarebody Syndicate: @SquarebodySyndicate
AFR Heads: @AirFlowResearchHeads
Dart Machinery: @DartMachinery
Bendpak: @BendPak
This just proves Zac is one of us with a will do attitude. Don't know if can do, but will do. Totally relatable.
Going through the work looked hard, editing the footage must have been harder 😅
@@JR-ii4lq the struggle is so real
Work on your own cars they say, it’s easy they say. We’ve all been there Zach. Thanks for the therapy session.
That’s how I feel like I’m not alone
it's comforting to know I'm not alone in making poor automotive decisions
Literally the most realistic car channel in this one episode. Pain in the GD Ass sometimes, but worth it in the end.
Bro I mean this in the best way possible...it's honestly refreshing as fuck to watch someone actually struggle while wrenching on YT😂 All everyone usually shows is everything going perfect and all that bs...living in Boston my entire life all I've ever known was cussing and busting knuckles hahaha
At your service
I've never heard somebody speak in morse code 😂
I was thinking of counting how many beebs there was 😂
Finally some realistic wrenching content! Nothing ever goes exactly as planned. It’s nice to see people joining the struggle bus. 😂
Finally someone who shows what its like in most peoples garage, lots of banging, swearing, and calling yourself all kinds of names. And lots of learning as you go.
The struggle bus is real. Thanks for posting bud. Most of YT automotive cuts those parts out but not the chop lord. Keep grinding we will watch.
Finally a project car channel that looks like me 90% of the time when working on my own projects! It can be a headlight bulb change or an engine swap, somehow it always ends with swearwords and throwing tools.
Zach you are direct duplicate of how I work! That's why I am here! LOL. And you have the best hair ever!
Minus the hair comment I agree
This series has been HIGHLY entertaining.
Watching Zach go all heart of darkness with this build is amazing
Realest car channel. I’m grateful that you leaving the mishaps in your videos. We’ve all been there and we all feel your pain!
This is a great style of content Zach! the narrating your mistakes is great! it is comforting knowing you struggle with things much like people do at home having a go and getting it done cheers from australia
I LOVE the way you narrate. This and BIG-TIME are my favorite new channels.
I don't know whether to laugh or cry at this. Defo best build content I've seen in a long time. Gets boring just seeing guys and girls get tools go to vehicle do thing and it's done. But this is real and way better....... What could make it super funny would be to have Suppy and his guys come in every now and then and either rib the crap out of you, laugh and just be how we'd all imagine they would watching you stuggle. It would be mean as hell but proper entertaining...... Never change Zac, you the man
I'm so glad you're willing to put this kind of stuff out because this is how i feel every time I work on my own vehicle 😂
This is the funniest "home garage" wrenching channel on UA-cam.... this is fucken hilarious. Keep up with the struggle Zac, we are loving this show
It’s cool that you show the struggles and the getto ways about working on your own rides.
Hahaha, love you for showing the real wrenching life!! Not the fake Instagram shizzle
BFH is always the right tool... Respect bruh!
This is the very stuff that happens in life, while working on anything mechanical, that builds tremendous character.
So, at least you have that going for you...
...which is nice.
Don't worry weekend warriors can relate
Now, this is genuine, down to earth car content. Keep it up!!! 🤠
This is so fing relatable! 🤣🤣 Only thing missing is doing this on the driveway on jackstands.
would like to say thank you, every you tube video people make it look like working on cars is easy, with one problem it not. you have shown its not the case.
i like what you are doing.keep up the great work
thank you
Dude Josh was the guy to call for this....for sure. My favorite automotive masochists, with my other favorite automotive masochist.
The Dana 60 swap probably would have been the move at this point, however 60 is heavier, and has such a gigantic pumpkin that it losses ground clearance. (Not to mention needing different wheels, rear end......and then , and then , and then......
This video triggered ptsd from having to replace my own ball joints. Mini sledge for the win!
Thank you for being honest about the process! There’s so many times I go through stuff like this…. Banging my head against the wall and I wonder if others go through the same thing!
I'm glad I'm not the only person that works like this...lol
Watching you ride the struggle bus really takes me back.
Shocked this doesn’t have more views. Maybe because this is REALLY what it’s like to be a car/truck/ motorcycle guy. I feel your pain bro!
UA-cam can’t stand the realness in this series
Zach, this is real life stuff that all of us can relate too. Dont change
Love watching this build. Reminds me of why I quit working on my 98’ rcsb and let it sit and rot in my dads yard 😂
Well done, I was expecting the front axle to make a bunch of noise. I watched the whole thing, some parts twice. This would be the struggle those with a love for cars feel when they don't wrench, it's all over YT. What makes this batter is some real money is being spent on parts.
Hey, congrats on becoming one of the most relatable car UA-camrs!
Hey Zach I hate to say it but watching you struggle is so therapeutic knowing I’m not alone and did he say chitlinslol
At least the struggle is not in vain.
@@MISTERZACHARY it’s going to a good cause
Getting flashbacks to helping my dad work on the car and watching him swear under breath and whack it with a hammer as he "teaches" me and my bro how it's done.
Damn it, Zac got me again. "Badda bing badda boom......professionalism....ha ha haaaaaaaannnnggggh.............."
Omg the world NEEDS more of this! Im dying! I love this shit
Hit it with your purse damn it😅
Lololololol “get a montero.” I had an ‘03 sport and loved that thing. Raced the shit out of it offroad with nothing more than an old man emu lift, 33” general grabbers, stainless lines and fresh brakes, a bao feng, and some $30 helmets. Talk about smiles per mile!
I'm in about hour 20 of a 2 hour project, so that 3 minute hammer montage really hits home 🤣
Fuckin aye bro this is the real deal wrenching that will help people learn to not be afraid to diy, just be ready to mess up and fix any mistakes. So many of my buddies still paying $100+ for an oil change cuz they can't get over the initial fear of messing with their vehicle.
Air hammer my boy
This entire vid hit me at my core. Could not help but laugh because I literally just got done with a project on my Camaro that should have taken a day... Was done 4 days later...
zach is a real one.
I've done one of them conversion kits and boy.... did the same shid you did brother. Now we know 4 the next 1
Best episode yet
Dam, this channel is the sheet!. Thanks for keeping the struggles in zack!! This how we all relate. 🤙
No worries sir you got this , we'll see you riding around soon . Stay safe and God bless
This is great! Because this is real wrenching life for most of us! We learn as we go 💪🏻🥳 Nice to watch a channel with some reality and the reality commentary or at least how we think without spitting it 😅👍🏻
Love the hammer therapy…. Looks like you may need a cutting torch next time!
Love this. Real and relatable !!
I feel like I was watching myself work on my projects 🤦🏻♂️ but on the flip side you gained a crap ton of knowledge 😂 at least that’s what I tell myself
That’s what it’s all about
Mate, you replied to my last comment, I feel every ounce of your pain, we've all been there. But the end result is driving it and knowing you know everything about it, intimately! Keep on doing it! Cus why the fuck not?!
i've been a mechanic for 20 years and you my frriend cracked me the F up. Been there done that. best way to learn get diry
Keep the momentum up man! We've all been there lol
So relatable, trying to get aftermarket parts to work together sounds good in theory lol
We have all been there. This is great you are showing this. Cars and trucks are a pain in the ass sometimes.
Zac dont let that beautiful beast kick your butt 😂😂😂
Keep on keeping on bossman.. as an aside, i brainfarted and thought you said Jimny for a second.. V8 Jimny would be a riot..
I just did balljoints for the first time last week, when I saw the hammer I was like ain't no way that's gunna work... cuz I tried that 😂
Keep killin it my man! The chop king himself.
I see you work on trucks the same way i work on trucks 😂
You should replace that rag joint steering shaft with a Borgeson steering shaft and eliminate the rag joint entirely.
Hammer Time with Zach
Christ this was brutal/hilarious to watch. I feel the pain brother
Yep looks about how I go about working on my rig
37 seconds after upload, let's goooooo!!!
Love this, best content on YT rn hands down. But, a funny future segment would be to get Ricky from RCV to show the proper installation in like an hour LOL
Been there, done that.
I say this being a “fan” of Zack’s UA-cam exploits since before hoonigan but it’s very entertaining to me how bad he is at wrenching lol
I'd like an uncensored Zac. No beeps. New drinking game.
This makes me feel so much better about my own struggles
As a kid that grew up with a Mil spec K5 Blazer... This is like oatmeal in the morning to me. I'll never f*ck with a K5, but I'll watch this all day everyday
Pickle Fork That Hooo my brother!!
Your videos are amazing. 2 minutes in. Brother, buy a ti rod end remover. Hella cheap and comes off super easy. They are cheap tools. Save you time and stress 🎉
Dude, I feel this 100%! Frustrating but great content.
Came across like a "Get learnt with Ricky" episode from trailer park boys 😂😂
Very correct in saying….”should have gone Dana 60. That axle is a waste of time , with power you’re making. It’s like settling a 10 story building on toothpicks! 😢😂😂😂😂😂😂😂
Right on!
I feel everyone has been here or has held a flashlight incorrectly. Also when the tool is hammer all is nail😂!!!
It’s the journey mate not the destination🤘🏻🤣
Absolute train wreck of a DIY experience... love it. The reality of how projects actually go.
I know your pain. A ball joint separator is so helpful and for $20-$30, totally worth not having to smack suspension and steering components with a hammer. I made due without one for far too long.
The struggle is real
If you have never had an automotive project that was supposed to take an afternoon last several days, then you are doing it wrong! It never goes to plan, you never have all the parts you need. Tools? I have a few but we make it work. Finally someone is being honest with UA-cam and showing how car builds really play out!
Zach making me rethink my plans to fix my 2010 z71 🤦🏽♂️😂😂😂
Yay another upload was looking forward for this one
Imma keep watching even if this 4 hour install takes a month!😂
I can relate to the part where a relatively small project that should take a couple of hours becomes a 6 month project
You do good work zach
If it all went together easily it wouldn’t be fun!
Dude! Love the, what not to do! You’re the man! Love the rawness of this video. We can totally relate. Thats how we roll. 👊🏻👊🏻👊🏻👊🏻👊🏻
So f@cking relatable. Love it.
Gotta love the style of your videos 👌
Can't beat the look of a warn hub on a square body 👌🏽
Favorite tool - Hammer. 😂
Touching the knuckle with a grinder is totally illegal here in my country lol. That was so fun to watch from here.