I'M PAINTING MY OWN LAND ROVER!
Вставка
- Опубліковано 18 кві 2024
- In this episode, I start the work of prepping my Land Rover and getting it ready to paint! I've never done anything like this before so let's see how I get on with sanding, priming, filling and painting my Land Rover
SUPPORT THE CHANNEL - bit.ly/3x82YMg
--------------------------------------------------------------------------------
PROJECT 90 MODIFICATIONS
* LTPRTZ Headlights - bit.ly/3zwL9HJ
* Exmoor Trim Interior - bit.ly/3xVEd6M
* Exmoor Trim Canvas - bit.ly/4f2w0y4
* Exmoor Trim Bar set - bit.ly/3y1sGmc
* Exmoor Trim hinges - bit.ly/3Wis4lr
SCOUT (Defender 110) MODIFICATIONS
* ORE Cranked Bumper - bit.ly/4bFycso
* ORE Steering Guard - bit.ly/4bIlOYR
* ORE Wheel Carrier - bit.ly/3xRYmdU
* Classic Light Surrounds - bit.ly/3dM9JtN
* Front Runner Roof Rack - bit.ly/4f38xgv
* Vickywood Roof Top Tent - bit.ly/4bLaQSm
* Double Din Switch panel - bit.ly/3DZbyOR
* LTPRTZ Headlights - bit.ly/4bHSVfs
* LTPRTZ Spotlights - bit.ly/4cWOfDh
* Zunsport Grill - bit.ly/3rdlWdS
*.Mud Spats - bit.ly/3Sgja3z
* Wiper blades - bit.ly/3VZryHO
* Gear stick collars - bit.ly/3VSX3Dq
* Optimill Washer Jet - bit.ly/3SsinyT - Авто та транспорт
A few years ago i saw a pickup with a raptored bed and the raptor also wrapped over the capping's. Having tried several times to rub the capping's down and repaint I'm now considering this option. I dont think replacing the cappings with galvanised ones will be possible on mine without first removing the roll cage otherwise that is what I would do.
Was nice to see how easy it is to remove/install the corner capping 👌
I’d have gone for bare galvanized pieces for that retro look, but that’s just me. Great job!
Looking good so far. I Raptor painted my 90 pickup in the end, in the same blue I think as yours, tinted to match the rest, as I didn't want to go to all the time and effort for only to be bothered about preventing new scratches.
Looks brilliant so far!
Thanks so much!
Brilliant video. Thank you
Glad you enjoyed it!
I mean come on... that is bloody cracking Zach! You certainly are putting in the skill building with this one... And not afraid to try. Brilliant job 🙂👍
Thanks so much! Loving learning with this build and can’t wait for the finished result
@@ScoutTheDefender It is turning out to be a great journey to follow!
Definitely paint the body under the capping’s 👍🏻
Hey mate, it's a bit off-topic here. But I would love to know where you got scout's trailer power outet? I checked numerous vids but didn't find any info on that one. Like your vehicles as well as the content. Greetings from Germany
Are you planning on using a compressor and spray gun for the basecoat and clearcoat? Not super expensive but worth considering as you get a much better finish. Good job on the prep btw.
What size compressor would you recommend ?.
Nice job! You forgot to overlay the images for the raptor job at 11:35 😉
Knew I forgot something 🤦🏼♂️
may i ssuggest some products i sued to restore my gtr? duplicolor makes a great sandable prime and etching primet. i hgihly suggest you sue that as they also have wider spray patters to avoid tiger stripping. also for the the bed i suggest suing the raptor liner spray can. the texture is quality and durability is second to none and leaves a great sand finish.
Thanks for all the tips!
How many coats in total?..
3 coats in the end - then 2 coats of clear
The one thing I would say is you spent ages degreasing it and then knelt on it with bare knees! That’s why people wear those suits (at least wear trousers!) just a bit of advise
Haha yes! That’s a very good point 🤦🏼♂️
Impressive Zach. Looking great. How many cans of primer was that? (Ian @littlewhiteninety)
Hey Ian, this was 2 1/2 cans of acid etch and a can of high build primer