Wow, this worked really well even on my really damaged iron tip. Took around 30 minutes and constant tinning and proved to be really effective. Thanks for sharing this!
Damn!! It is working very well!! I droped some citric Acid, and add a big ball of solder tin!! At my surprise it is working very well! I tried it with old Copper type of Soldering tip, not new tip that are heated with ceramic heating element and it is working as a charm!! It is best to do it after cleaning the tip as much as possible from black burned product and it gives better result!! Thx much 😉 Now just need to find a small metal box and make some to store it properly 😁
No scam. It's work really well. Be patient, keep try and repeat the process. Before i found this video,Three of my damage tip(previously i file and sandpaper it) has magically cured . Impressive 👍 Thanks a lot bro.
thanks for this tuto my friend, can you show us how to make a good solder past with rosin and alcohol, and not tinner because the tinner is very dangerous When we inhale the steam rising into the lungs, And if you have another good way, do not skimp on us.
First dip the bit in citric acid and then use a sponge or brass wool to clean the tip...apply some solder on tip...and scrape it off by using brass wool and again dip it in acid...repeat it multiple times and the tip will eventually become shiny...i tried it and it did worked like a charm
@@syn80 The product used in video is called " Citric Acid Cleaner " And please tell me if "Citric Acid Cleaner " **" And citric acid "** Are the same .
what are the first 2 words? "Citric Acid" there are other videos on YT using citric acid. I guess you think because it says "cleaner" it's not citric acid? The cleaner just isn't marketed for food consumption. People use it to clean their coffee makers, which is why it's called "cleaner" Bottom line is it is citric acid, you can use either type, it's basically the exact same thing. @@AdamTheBot
@@samrathassan Is not melting because the heat is spreading is not matter if you got solder pieces in it or not the point is to clean the tip from oxidation with only citric acid if you have it will do the job.
After seeking for thousand years finally I found a great method how to fix my bad soldering tip.. many thanks sir
LOL! 1000s of years!
Underrated but most useful technique video. This is the easiest , effective, and cheapest way to retin a non working tip. Thanks bro.
Wow, this worked really well even on my really damaged iron tip. Took around 30 minutes and constant tinning and proved to be really effective.
Thanks for sharing this!
can u show me which one you bought? like a link on ebay pls?
@@JohnnyStashh Search up TS100
why 30 minutes,
use simple citric acid crystals.
where did u buy the citric acid 🤔
@@kenya_3364 You can usually find it in the supermarket in the cooking aisle.
Damn!! It is working very well!! I droped some citric Acid, and add a big ball of solder tin!! At my surprise it is working very well! I tried it with old Copper type of Soldering tip, not new tip that are heated with ceramic heating element and it is working as a charm!! It is best to do it after cleaning the tip as much as possible from black burned product and it gives better result!! Thx much 😉
Now just need to find a small metal box and make some to store it properly 😁
can u show me which one you bought? like a link on ebay pls?
@@JohnnyStashh which type of citric acid ? or soldering tip you mean??
@@DrZipZwan if you could tell which citric acid could be great, was it from aliexpress or maybe amazon?
@@unstable8968 any citric acid dude, you can find it in any spice store, or any supermarket.
I tried this. The salt was melting. But the lead in the salt was not melting. I used tong kong 60% alloy lead. Any solution bro?
No scam. It's work really well. Be patient, keep try and repeat the process. Before i found this video,Three of my damage tip(previously i file and sandpaper it) has magically cured . Impressive 👍 Thanks a lot bro.
I tried this. Works perfectly. Got a shiny tip every time. Saved a lot of money. Thankyou
Best video I’ve ever seen, so uncomplicated and so easy to do. Wow keep it 🤙🏼🇦🇺
Worked like a charm but it doesn't last for extensively beaten up tips. Use this method as soon as you see oxidation. Thanks for the video.
Really worked beautifully,
use simple citric acid, available in market for making curd ( from milk )
I tried this. The salt was melting. But the lead in the salt was not melting. I used tong kong 60% alloy lead. Any solution bro?
clean the tip in citric acid, wipe clean,
If required clean the soldering area very lightly with a file.
When cleaning in citric acid, no need of adding solder pieces.
@@kalyanchatterjee6892 Thanks bro. What is file?
If you don't have file, use normal sand paper
Thank you ❤
It works for me bro, big thanks 👍👍👍👍
wow.. good job 👍
Thanks brother it works fine.
It worked thanks 👍🏻
A very good information....sure I'll try it out....thanks for sharing...
Thank you bro💙
such a good video :)
OMG! this is great!
i have one question, if without flux wire is it still working (just using citric acid)?
thanks for this tuto my friend, can you show us how to make a good solder past with rosin and alcohol, and not tinner because the tinner is very dangerous When we inhale the steam rising into the lungs, And if you have another good way, do not skimp on us.
Alcohol is also dangerous to inhale, make a fume extractor
It worked. Thanks.
its just pure citrid acid crystal or add some sea salt ?
Tnx
Wow! Now that is cool.👍😃
yeah it works thanks
thanks a lot.
I like ur Idea..VG
Ahaaa. Going to test it, NOW.
Thanks a lot
I tried this. The salt was melting. But the lead in the salt was not melting. I used tong kong 60% alloy lead. Any solution bro?
First dip the bit in citric acid and then use a sponge or brass wool to clean the tip...apply some solder on tip...and scrape it off by using brass wool and again dip it in acid...repeat it multiple times and the tip will eventually become shiny...i tried it and it did worked like a charm
Thank you !!
what is the name of container bottle materials?
so nice...
Does it work??
one should be able to press the soldering tip onto a lemon and it should do the same job
❤️❤️❤️
Can't I use lemon water, because lemon has citric acid ?
So i burned citric acid once and avoid breathing it at all cost, it hurt for like 30min
It work without use rosin flux solder wire
thank for this information bro.
😊😊😊😊😊😊😊😊😊👍
new sub and a like for for this. thanks bro :)
使用後烙鐵頭很容易壞嗎？
Is citric acid and citric acid cleaner same?
Yes
I think the one in the video is not food grade and meant to descale coffee makers etcetera. But any citric acid will work.
is it citric acid?
How to purchase Citric acid cleaner ?
bottle name in english ???????
Did you use citric acid?
did you even watch the video?
how to buy that chemical
omg!
原來是檸檬酸
Will citric acid work ?😊
are you blind?
@@syn80 Are you ?
you must be because it shows in the video using citric acid @@AdamTheBot
@@syn80 The product used in video is called " Citric Acid Cleaner " And please tell me if "Citric Acid Cleaner " **" And citric acid "** Are the same .
what are the first 2 words? "Citric Acid" there are other videos on YT using citric acid. I guess you think because it says "cleaner" it's not citric acid? The cleaner just isn't marketed for food consumption. People use it to clean their coffee makers, which is why it's called "cleaner" Bottom line is it is citric acid, you can use either type, it's basically the exact same thing. @@AdamTheBot
Does citric acid destroy the tip? because is acid?
citric acid is a weak acid.
@@Danteelias08 Thank you.Still using citric acid didint damage any soldering tip i have.
I tried this. The salt was melting. But the lead in the salt was not melting. I used tong kong 60% alloy lead. Any solution bro?
@@samrathassan Is not melting because the heat is spreading is not matter if you got solder pieces in it or not the point is to clean the tip from oxidation with only citric acid if you have it will do the job.
BGM很像電影 星空 的配樂
😊😊😊😊😊
😊😊😊
thanks a lot.