240Z - RB26 Engine Conversion [PART 7]
Вставка
- Опубліковано 30 лип 2024
- The factory diff and brake set up was not going to be enough to handle RB power, so the decision is made to replace all of it!
►Shop: www.mightycarmods.com/collecti...
►Facebook: / mightycarmods
►Forum: forums.mightycarmods.com
*GET MCM DRIVEWAY NINJA GLOVES HERE*
mightycarmods.com/collections...
Thank you to Techno Toy Tuning for supplying the rear end, brakes and suspension.
technotoytuning.com
Also something to note around Mighty Car Mods: we are normal guys and are not trained mechanics. We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. Talk to a qualified mechanic if you are in any doubt. - Авто та транспорт
![240Z - RB26 Engine Conversion [PART 8]](http://i.ytimg.com/vi/GIgB8i8o2No/mqdefault.jpg)
![240Z - RB26 Engine Conversion [PART 8]](/img/tr.png)
*WE HAVE MCM BOOKS AVAILABLE* Hard cover. 130 Pages. Shipped to your door anywhere in the world. Get your copy before they're gone!
mightycarmods.com/products/the-car-of-mighty-car-mods-hardcover-book
Love you Mighty Car Mods! been watching since the beginning and still watch all new videos within minutes of uploading! Keep up the GREAT AMAZING work :D
Mighty Car Mods finally another video lol 😁
You guys are my absolute favorite people. Thought me everything I know
Mighty Car Mods first 9 minutes is like watching a Christmas unwrapping video
Love you guys, you awesome
MUCH LOVE FROM THE UK 😎
Mighty Car Mods I’m doing a similar style of restomod to my 85 Celica, using the exact same Aeromotive phantom fuel pump kit. I’m also going to have the car engineered. Would you be able to share what you are going to do with the fuel tank vent? I assume you’ll need to have a charcoal canister setup?
When Marty said “I’m just happy for people to be happy”, I felt that. 👌
The new Mighty Car Mods gloves are perfect for working on cars or working on the garden with Cheryl and trimming her Bush!!!!!👍👍👍👍👍
Lucky man to be able to help a woman cut her bush.
Or get the exact same gloves at your local garden centre for about a buck.
Mr.Mister - No, they're not the same as the garden centre gloves because the MCM ones are made from woven unicorn pubes, which are resistant to unwanted penetration whilst still allowing a good feel. That is important whether you're working on your car, or you're down on your knees, vigorously tugging at a straggly bush.
Unfortunately the Mighty Car Mods logo was worn off my gloves before 10 o’clock coffee break at the shop, might be better for trimming bushes.
"Everything is supposed to fit everything, and it never does" I'd wear that t-shirt :D
Moog: "Is that another bolt-on part that doesn't bolt on?"
Yoda: "Yeah."
Moog: "Yeah. Okay."
Yoda: "Yeah, just fairly - pretty standard."
I was about to sleep....but maybe in 22 minutes. Good work guys
xBeau Gaming me too haha
Got the notification in bed, lmao.
xBeau Gaming Same actually.
LOL xBeau What are you doing over here!
xBeau Gaming yo what are you doing here I loved your mount and blade videos! Banerlords hype!
What an awesome build, to think it all started in japan and now you have parts from all around the world in the car, the true definition of "built not bought", keep it up guys! :)
Yea but they are using BOLT ONS thats too easy. You have to buy chinese crap off Ebay and reverse engineer them to work like REAL builders do.
Built not bought, really everyting was send for free! (jealous)
pretty stupid saying considering they have bought a lot of stuff out of their own money for this build.
Asiamies Yeah because an RB26DET is a full bolt on conversion and requires no fabrication whatsoever.. Right? Shut up. This is "built" through and through.
Shona they said that they want to keep it reversible
Those Techno Toy Tuning parts look awesome, and I really can't wait till the build is done and see how this beauty drives
honestly every time you guys post a video it makes my day I get so excited when I see notification that there's a new episode keep up the good work you're the only Channel besides Scotty Cranmer's Channel I watch religiously
Adam DiSalvo checkout Boostedboiz, PFI speed and cleetus mcfarland. Maybe even Tavarish with his twin turbskie Lambo project
Adam DiSalvo same
I rushed onto UA-cam
And a moment of silence for the lament of missing Project Binky, please.
Scotty Kilmer?
Paddywiggle his name is Scotty cranmer he's a professional BMX series had a UA-cam channel 4 years halfway through his UA-cam career he had a horrible accident and was paralyzed he's slowly regaining movement to his body but him and his friends put on a good show and it's awesome to see his progression daily and they post every day but Sunday
Nice video, but don’t let this distract you from the fact that Hector is going to be running 3 Honda Civics with spoon engines. And on top of that, he just went into Harry's, and he ordered 3 T66 turbos, with NOS. And a Motec exhaust.
"From the classic parramatta road blow-off valve whoosh all the way through to the bankstown special giant pigeon". When your from bankstown, never lol'd so hard at this (For people outside Australia, Bankstown and Parramatta are Suburbs in Sydney)
EASperts and some of the biggest Bogan area's too. Lol
Thanks for explaining! A suburb in NSW... Still bamboozled, NSW is 13x the entire area of my country...
NGC1433 what country are you from?
Free Smoke TV
Latvia. All of its 64K square kilometers...
NGC1433 true bro
That was the fastest 22 minutes I've had in awhile, I cannot wait for the next episode.
"So we dropped the rear end completely, that sounds like a holiday in Bali doesn't it" lmao :)
Moog's imagination when it comes to jokes is unlimited :D
XD
Loved your appearance in the 1320 video at the Haltech opening
Gmanmovies09 oh man I wish I got Australian UA-cam. I would have LOVED to have seen that! Stupid Canadian Internet.
huh?
ua-cam.com/video/I596IKixRiw/v-deo.html
link?
Hahahaha I feel like they made that video interesting, without them it would have just been another 1320 video that I skipped most of
Wait, people actually watch 1320 video?
3:30am. Was going to sleep but mcm for life.
Hell yeah! T3 makes some of the best suspension components for old Japanese cars. They are the go to for me and my classic Toyota buds. You will not be disappointed MCM. Glad to see a local company from my state help you guys out.
16:51 that whole conversation had me cracking, must just be my dirty mind
they do a similar thing in most vids :)
"I can't come into work today, boss." "Why not?" "I've dropped the rear end completely."
Bolt-on that actually bolts on? What is that, a Volvo?
Honda stuff isn't bolt on, otherwise the question wouldn't be "will this fit in my honda?"
Bolt ons that actually bolt on are unheard of
if something is a bolt on and doesnt fit, you make it bolt on, just make a new hole :D coming from a Volvo guy :D
Indeed, if it somehow doesn't bolt on to the volvo, you can make it bolt on, but it's usually still bolt-on
Not even Volvo bolt ons bolt on.
I love your guys excitement. The way you have evolved from a couple of guys working on their cars to full on custom builders and still have that raw passion for what you are doing.
It's looking good, lads. This car is going to be rad. Mad props to you for getting all these videos out AND getting all this work done. I just started a new project on top of home renovations and I'm still learning how to film/edit... and then there's the day job and the rest of life. You two are truly legendary.
Will the car be called *Cheryl* ? It is a *Fairlady* right? Seems legit.
Cheryl is not fair nor a lady.
Cheryl is not a lady
Cheryl is most definitely not lady-like. Well, maybe a lady of the night.
Maybe a Fairlady with a beard growing because of all the testosterone injections...
Wait who's Cheryl ?
You should spray the inside of the arches with that rough black paint to protect it all and make it look nice under there. Just a suggestion!
OC slim I agree. Sounds like you're referring to undercoat btw.
I am starting my RB26 build in a few weeks..... 1970 Datsun 240z..... loving this guys!!!! I am also using the full techno tuning setup. Its killer!!!!!
Genuinely love that you two have continued to be as Aussie as they come no matter how international your audience has become. So so good. Stickin to your roots. You guys are inspirational, doin what you love everyday.
YES!!!! About time. I know you guys have a heap on your plate, thanks for keeping the videos coming out very regularly.
Never knew that Strayan christmas was in May. Funny world.
I had a big smile on my face watching you boys opening all those boxes (bit of envy as well).
Keep up the awesome work
lol me neither, guess everything is backwards down under. You can tell they were having a blast because they just started going at it, ended up with parts and packaging everywhere
Is this a joke
I’m fucking crying lmao
So many sick parts at the start, so blessed! Can't wait to get to see you guys enjoy it!
I love seeing you guys excited time after time about cars. I am also in disbelief of well fitting aftermarket parts.
Never unlocked my phone so fast😂😂
Who's Ever?
Sorry my fingers are too fat to type 😂😂🤦🏽♂️
G Guicy In soviet Russia phone unlocks you
I know the wae I’m not from Russia I’m from Australia
"Im so pumped... so is the jack"
This might be my fav car MCM have ever build
Love the innuendo. It's one of the things that have remained constant through the years.
"this is a gtr with no front drive in an s30 body" Moog 2018
Didn't u say you where going to turn the key this episode :(
At that point don't think they had actually planned to redo the rear.
It was in the preview for next episode, which was technically part of this episode...
Leon Kernan good point
If you have ever done any extensive vehicle modification before, you will know that things always take twice as long as you think it will and if it doesn't, its quite possible you did something incorrectly or forgot something, and you will later regret it. They are just taking the time to do it the right way. Cheers.
This statement is true for almost any hobby involving assembly of an object.
Probably my favorite build yet. Awesome car, awesome power plant and parts. The vibes from these videos are great too. The rear end is my favorite too btw
That's so freaking good!!! The excitement was palpable! I couldn't stop smiling when all those bolt-on pieces kept bolting on.
when ya tryna do work, but MCM Video comes out...
I too am exploding
I'm exploding with excitemen
This is what gets me through the work day! Can not WAIT to see this 240 rip!
I learned how to drive manual in a 280 datsun and I just love that you guys are doing this car!
_$75000 and a million cat castles later.._
"I'm just happy for people to be happy"
-marty
Wow, must be nice to have such a UA-cam presence that people are consistently just sending you amazing mods. That's thousands of dollars worth of stuff! Congrats :-D
I love Marty’s enthusiasm and excitement when he opens things
I wish technotoytuning would sponsor my build!
Hi Cheryl
Super excited to see this build progress. Even more so than the super gramps series
As usual, you guys always do perfection performance artwork for the high po world. I am disabled now and watch this always. No more race car in the driveway. I am hoping someday for an inexpensive Porsche Boxter to cover that empty area. Keep up the perfect work. Where there is a will there is a way. Never stop or give up, strive.
The guys in Cali hooked it up! Shoutout to the West Coast (best coast)!
Dunkaccino25 what about a state that loves illegals ?
RK Gaming What does that have to do with anything? Get your politics out of here and let me enjoy some cars ffs.
less unpacking more building!
This guy gets it!
yeah man, It took them forever to do the unboxing , and just small talk for more content. I skipped till 9:32.
I absolutely love this build, I'm so stoked for you guys!
Techno toy tuning is great!
I bought adjustable lower control arms, steering arms and roll centre adjusters for my corolla. I was surprised and well pleased with the quality. 👍
Last time I was this early, Shaz cracked the shits because she hadn;t even got her clothes off yet
Moog m8, please release the song that plays at 9:34 - 10:45. Take my money m9.
+1
Was that a slamber city reference I just see...
+1
Build of epic proportions, thank you for documenting the journey!
im just loving the fact that you are working on a classic
cool
When are you guys coming to New Zealand!!
dySicle yea come on MCM
Yeah hard been waiting!!
Come to the South Island this time much more interesting😀
I'd even loan then my bh Mazda famila with a gtx motor 🤣
Wow it's like two kids at Christmas watching you blokes unbox all those amazing car parts! I'm pretty jelly!
From an old school 54 year old male you guys are the bomb i wish we had you guys around when i was younger you pair defiantly put a smile on a grumpy old pricks face. Keep doing what your doing
turning the shroud upside down, is that an ozzy joke? :D
Doing a bad to the bone rear diff on my 240z as well. Might I add it's a whole lot cheaper and stronger.
Yeah cool but they got theirs for free plus a bunch of other free shit
exactly, i'm glad they got theirs for free, they deserve it, and I love their content, but I'm working hard to make sure theres a better system out there avaiable for roughly 33% of the cost. Because its about time someone came up with something for the rest of us.
Invincible Extremes Muscle Cars Garage... I guess you kinda have to install a super heavy duty rear end with a screen name like yours don't you? Lol.
Invincible Extremes Muscle Cars Garage what are you doing for a rear diff in yours? I have a project 260z with a turbo ls1 and am looking into an 8.8 but that’s an expensive diff swap lol
Shawn Hacker it WAS an expensive diff swap. What if i told you i have 5 lug 13.2 inch front disc, 11.8 rear disc, 4 corner coilovers, a limited slip 3.31 geared 34 spline super 8.8 and cut down 2015 mustang cv axles and made in USA timken bolt on hubs... all I'm in the whole thing for only $1,950.... granted thats not including my diff mount and suspension knuckles, but i promise you they will be competitive in pricing and they are hands down the best design out there.
find my Facebook page and contact me and I'd be glad to show you what I'm building. I'll have a video out soon
Only car channel that has taste, does shit right and does it in less time.
Love it all.
I love the innuendos and double entendre stuff... always a treat.
That fanshroud is pretty bad actually. It blocks lots of air while driving. Put some holes in there with rubber flaps so that air can pass trough while driving and gets blocked off when standing still and the fan is sucking air
GeenIdee2 doesn't the fan shroud go in the back of the rad tho
It sits behind the rad if that's what you mean. But air does not flow through the radiator, if it has nowhere to go after it. You've got high pressure in front of the rad, what means that the lower the pressure behind the rad is, the better the air will go through and thus better cooling. Blocking off the rear of the rad (in this case about 40% with this fan shroud design) will make it less sufficient. I my opinion not something you want with this project.
No need, millions of factory vehicles have shrouds like this. In fact lots of Engine have the exhaust manifolds bellow the intake manifold but if it was the other way round it would be way more cooler due to heat rising. Short answer is you could make it better but it works lol.
Those factory shrouds have holes with flaps over them so it can let some air through. I have seen this even with shrouds that have 2 fans on them
@Geenidee2 That fan shroud is pretty great, actually. When driving, the area of the fan, even without the fan running, is plenty of area to cool the engine. If you're romping on it or are at a standstill, the fan kicks on and pulls air across the entire surface of the radiator- mind that the shroud stands the fan about 25mm off the radiator.
Without the shroud, the fan would have to be right on the surface of the radiator core and would only be able to pull air through over an area equal to the size of the fan. When you get blades close to a core, it's noisy as hell, too. The shroud is absolutely necessary.
Or, you could go tell Al that he doesn't know WTF he's doing & pray you don't get killed from the side-eye.
The first time I ever worked on an engine with gloves. It was fully disassembled and i was removing a bolt. "I bet i can get better grip if i remove these" So I took them off. IMMEDIATELY, the bolt broke loose, and i scraped my fingers just above my knuckles on the sharp corner of the engine and peeled some skin off. THE GLOVE LITERALLY HAD A PROTECTIVE SECTION IN THAT AREA JUST FOR THAT. Needless to say, buying these gloves lul.
Dude. That felling when it fits right away is fricking awesome. Awesome build, greetings from Chile 🔰👌✌
That’s some seriously sexy rear end additions boys!! Can’t wait to see this one finished and tuned.
Didn't you learn anything from that show from a decade ago and paint that intercooler black?
Well, they learned that being black just makes it better while sitting still and that once air is being forced through it as you drive along black or not black perform the same.
So when stuck in traffic, I'd rather have the black one.
how often are you stuck in traffic producing maximum boost?
...or any for that matter lol
rarely, but the air coming off of a turbo in stop and go traffic gets hot to. Not as hot as max boost, but reducing heat is always better than not.
RWoody1995 Ever time I am at a stop light its easy to say I use the linelocker alot.
Gotta love US engineering from a proper company.
ChrisHallett83 It was meant as a stab at counterfeit/inferior part makers.
Lol watching u2 go through all them boxs reminded me of my kids at Christmas so happy lol smiles from ear 2 ear loving it keep up the good vids boys
I'm in a LS1 S13 coupe now, but I dreamed many dreams about those T3 parts. This build is incredible and exactly what I would have done with money as no object. Well done boys!
First like, then watch
#MCMtv2 GTR R-32 VS #MCM 240SX..!
Diego Saucedo that needs to happen
The best episode of this series so far. loving it
Always a pleasure to escape life and watch your shows, thank you.
Do people still pull their pants down for turbo yoda
I do
i probably wood :)
i know i would ;v
I see what you did there ;) lol
what happend to 2sexy and tay tayy
Daniel Ko their book explains what happened to them
He sold tay tay to Lil Tay the biggest flexer.
I love everything about this build, you guys are doing it exactly right.
Man that is some nice suspension companies the quality looks amazing!! I love this project it is so fun see the car come to life ever time I watch!
No! I will not buy a Mazda!
(UA-cam ads)
Maybe if they hurry up and release the RX-9
I'll buy a mazda if they release a new rotary powered car
ZeBlackCat mazdaspeed 3?
ok, yeah, I love those too lol ya got me
Love the builds and the resultant cars HOWEVER - I do notice that the items you unpack reveal the HUGE amount of PLASTIC and EXPANDED POLYSTYRENE packaging that is shipped across the world every day. Given that your first videos were on the subject of small environmentally "green" cars - it would be great if you investigated the impact your waste has and sought to look at recycling both discarded car parts and criticised manufacturers that do not use bio-degradable packaging like corn-based packing chips and paper rather than plastic bubble wrap.
Loving the build guys, can't wait for the next episode!
in these 7 parts i learned more about a car then i have ever learned before.
plus the other series i have watched my MCM i have already replace so many parts and saved a load of money.
Plot twist: thor kills stan lee...
This is car pornography...
Simply the best build they've ever done. Can't wait to see the finished product.
This build just got to another level. Great work guys !
Don't accommodate to them, they need to learn how to say aluminium.
al-u-min-ium is how aussies say it lol
Aussies say it the proper way
Just check out like 90% of other metals on the periodic table and see how they're spelt... IUM not UM. :)
Cars n' Us for some reason Americans think it's pronounced "Al-oom-inum" - we let them speak our language and they decide to butcher it, at least you Aussies have the decency to speak our language properly!
Readman Rides well over here its spelled aluminum. Not aluminium.
Wow your parts are falling from the interwebs! Love your bits! Top build.
Although you guys truly are an international channel of automotive content, it is always great to hear the Australian references and slang come through!
Funny looking ls swap?
Why the hell would you use an LS on a car like that,RB all the way!
Nah mate ls
Lol i know, im saying ls swap to start some controversy
#lstheworld
Daniel James agreed, v8 or bust.
10 mins of unboxing - yawn!
Those parts are legit! The ride is going to feel so good!
I was gonna revise for my final exam of uni, but then I saw this... Great video, excited to see it running!
I
Love
This
Series!!!
Plus it’s getting me so hyped to continue building my 510. Thanks MCM!!!!
I friggin’ love this build. This thing is going to be such a little weapon!! Keep up the terrific work, chaps! Maaaaaaaaaaaaaad...
Amazing job gents. Absolutely love this car and build. Thank you so much for all the content.
Can't wait to see AND hear this car in the road!