How to Use a NOID LIGHT to Test an Engine for Misfire | Test & Fix P0304 Misfire Fault Code

In this video I show you how to use a Noid Light to test the engine (fuel injectors) when you have misfire. Also This video shows how to fix P0304 for misfire.
Product link in Amazon: amzn.to/3MvAgJS
You may find the wiring diagram I used in this video in the link below:
drive.google.com/file/d/1PXwQ...
#misfire
#injector
#p0300
#p0304
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

[@AutomotiveDiagnosis]

Also watch the following video:
How to Test Ignition Coils | Coil on Plugs (2-Wire | 3-Wire | 4-Wire) & Ignition Coil Pack
ua-cam.com/video/CKnbw3z4YUY/v-deo.html

[@PeterHernandez-lg2eh]

Just found and subscribed. This may be my issue. Gonna order a noid light kit. Have a po302 on my 2006 Subaru sti. Did all the swapes and tests. Compression, leakdown, vacuum leak test all good. Changed upstream and downstream denso sensors. Replaced crankshaft and camshaft position sensors. Still have po302

[@AutomotiveDiagnosis]

Hi my friend. Have you swapped the ignition coil with another cylinder?

[@matmechanic5909]

Great explanation.

[@AutomotiveDiagnosis]

🙏🙏

[@matthecarguy7962]

More videos like this please.

[@AutomotiveDiagnosis]

Sure thing.

[@devildogg112985]

Very well explained .

[@AutomotiveDiagnosis]

Glad you liked it

[@PeterHernandez-lg2eh]

Agree

[@autokiaa9563]

Good one

[@AutomotiveDiagnosis]

🙏🙏

[@dipakmanu1842]

Thanks

[@AutomotiveDiagnosis]

👍👍

[@mrshiney2]

Hey do you think this noid kit would work on a 2010 toyota Corolla?

[@AutomotiveDiagnosis]

I think it would

[@saginaw60]

What does NOID stand for?

[@OEFarredondo]

Salaam brother

[@AutomotiveDiagnosis]

Hi my friend, thanks for watching

[@samuelarhin6435]

We need full video

[@AutomotiveDiagnosis]

Sure thing. Sorry I couldn't film the part that I fixed the wiring part, I was actually only going to show how to use the NOID light. Many more videos are coming for troubleshooting though.

[@jorgemelina5704]

Show the wiring

[@AutomotiveDiagnosis]

Hi there, you may find the wiring diagram for this video in the link below:
drive.google.com/file/d/1PXwQgZ926cS4rkCeUALiTgA3oruClSuc/view?usp=sharing

[@jorgemelina5704]

@@AutomotiveDiagnosis the wiring in the video i mean , the actual wires in the car

[@ochoamanuel5710]

....not at all....thanks for share....from France

[@AutomotiveDiagnosis]

Thanks for watching