Truck looks great , like the color. I just bought my first RC4WD product, TF2 rust bucket edition. Love the truck but had a pile of loose bolts and screws, one of them being the input shaft of the T-case. I caught it before ordering parts but I swear they build these trucks on Friday afternoons
RC4WD stuff is nice, but you have to run through them and check the hardware before the first run. Especially since it's mostly metal. They don't threadlock everything so you have to stay on top of it. They're cool rigs though, it's fun to try and make leaf springs perform. Thanks and have fun! -"Angry" Dave
Yeah awesome blazer, I love mine ! Mine is still stock out of the box. I like the duel shocks in the front, I guess it's just that look thing !! Appreciate you sharing. Love watching your video's.
I love to hear that, thanks! The dual shocks do look cool, just remove the internal springs and they won't hurt performance. They're way too stiff with the springs installed. -"Angry" Dave
Yeah I definitely need to do mods to my tf2 limited blazer too. I had a shitty first run but I posted the video anyways. Pinion gear slipping motor not seated correctly and rear drive shaft tight and bound up. Waiting on parts and good grease to go through it. And definitely need to adjust the suspension. Thanks for sharing bro
@@AngryDavesADULTRC rite on. my first run totally sucked. Pinion and spur was off cause the motor wasn't seated rite. Rear drive shaft totally tight causing the ujoint knuckle to bind. I was pissed. Waiting on parts for 2nd run .but need to really loosen that suspension up and degrease everything first
Hell I’m loving your content it’s fucking awesome finally that’s freaking awesome I’m looking to get me a hard body for my vaterra rc blazer which I’m loving how it is but damn them rc4wd hardbody prices are freaking insane I found one for 90 bux all painted and ready to be mounted on
I don't have any rc4wd vehicles yet.i have lots of bumpers,winches, predator trax,benpak lift.i sure have my eyes on that intimidator pulling sled they announced end of last week.500$ big chunk of change.
They make really nice stuff. They are definitely more for the scaler than the performance freak. They can be made to perform pretty well, but between the cost of the truck and then the upgrades it won't be cheap. The pulling sled will be most attractive to people who put on events. For them it's worth the $500, it's another event they can add to their comps. -"Angry" Dave
Cool video,Dave. You might notice that your front shocks restrict movement a little, I ended up going with 80mm shocks with the Gelande2 hoops. I also got a little more travel in the back mounting the shocks to the cross member, 2nd hole from the outside. I hate when I buy something I don't fucking need!!
Just playing with it on the bench I can tell it's got more travel. I can't wait to get it outside. I don't love mounting the rears to the crossmember 'cause they rub the leafs, but they do have more travel. I'll have to modify the shock mount to add clearance. Cool, another mod to do. -"Angry" Dave
You have to watch "Cheap Trailfinder 2 Mods" for that. That was the original vid and run, but the truck broke down at the end. The " More Flex" vid is just a repair and re-cap of the mods. Thanks! -"Angry" Dave
Nicely done. Really digging your channel. Looking forward to the trailing vid. I've dropped both drive shafts due to the piss poor design. I used your heat shrink tip on the replacement for the front and when I lost the rear I used spare parts from the front to get it running again and more heat shrink. I need to get off my ass and get to work. --Santa brought me Emu shocks, 90's for front and 100's for the rear and a set of Red leaf springs for my TF2 LWB. On a side note I've done the interior and added stripe decals to exterior, as well as scale items to the bed, added the lift kit and simple lights. I also flipped the plate for the battery so it sits more to the front and added some lead weights to the front end. For kicks I busted open a stereo bluetooth speaker system and re-boxed the two speakers into a piece of foam and stuck it into the back seat so I can listen to some tunes as I roll. One of these days I'll start posting vids on my channel...Happy RCing!
That sounds like a nice rig. I've thought about doin' that with Bluetooth speakers. I would love to have some tunes in the truck. I still want a light kit too, and I think I'm gonna get some 1.55" wheels for it and finish out under the hood so it's super scale. -"Angry" Dave
I hate the rc4wd grub screws. Pos is what they are. What I did with mine is put the threaded end up in my drill then spun it fast and filed them down so it would fit all the way through. Once I got them all fitting good I soaked them in lock tight lol!
They're the stock RC4WD RTR tires. Reversed direction, custom cut, and Crawler Innovations Deuces Wild single stage foams. Thanks for watchin'. -"Angry" Dave
Your tire rotations are backwards. They are made to have the point of the tread patern facing the front to clear mud from them as they turn . Maybe you knew that maybe you didn't either way thought I'd let you know. Peace ✌️
Yes, knew that. They're backwards on purpose because they bite better for crawling that way. This truck doesn't see mud so I don't need them to clear. This rig is more trail running anyway so it doesn't even need to crawl that well. I'm not running them on this truck anymore either, got a set of RC4WD Good Year Wranglers. Thanks for watchin'! -"Angry" Dave
This guy is too FUCKING stupid to realize that some people talk like that and don't give two rat's ass fuckin' in a ranch dorito bag if you think it's cool or not. Go fuck yourself. -"Angry" Dave
Definitely. I can get more in the rear too by moving the shocks to the frame x-member. But I need to fab shock mounts so the shocks don't rub on the leafs. -"Angry" Dave
Dave love your Vids Man 😁 fantastic info, great how to Build, grub screws are a fuckin Pain in the Arse, You did a great Job eventually mate, looks Great , BOOOM😎 Great build Video Dave👍 weres the fuckin Hole 😂 we are all Assholes 👍😂👍
Truck looks great , like the color. I just bought my first RC4WD product, TF2 rust bucket edition. Love the truck but had a pile of loose bolts and screws, one of them being the input shaft of the T-case. I caught it before ordering parts but I swear they build these trucks on Friday afternoons
RC4WD stuff is nice, but you have to run through them and check the hardware before the first run. Especially since it's mostly metal. They don't threadlock everything so you have to stay on top of it. They're cool rigs though, it's fun to try and make leaf springs perform. Thanks and have fun! -"Angry" Dave
That truck is so bad ass ! I Love the trail finders ! And yours is off the chain !
Thanks so much bud! Much more coming with that rig. -"Angry" Dave
finally a UA-camr who speaks my F^ckn language!
Damn straight. Thanks for watchin'! -"Angry" Dave
Much respect for the way you handled the "oops" on the transfer case. Really made the entire video.
Thanks. Definitely better to diagnose BEFORE ordering parts, lol. -"Angry" Dave
found this by chance, im not even mad. definately going to keep up on your videos!
Thanks! Welcome aboard. -"Angry" Dave
Yeah awesome blazer, I love mine ! Mine is still stock out of the box. I like the duel shocks in the front, I guess it's just that look thing !! Appreciate you sharing. Love watching your video's.
I love to hear that, thanks! The dual shocks do look cool, just remove the internal springs and they won't hurt performance. They're way too stiff with the springs installed. -"Angry" Dave
Good info there Dave brother, awesome job bro
Thanks brother. -"Angry" Dave
@@AngryDavesADULTRC Hooah brother
Yeah I definitely need to do mods to my tf2 limited blazer too. I had a shitty first run but I posted the video anyways. Pinion gear slipping motor not seated correctly and rear drive shaft tight and bound up. Waiting on parts and good grease to go through it. And definitely need to adjust the suspension. Thanks for sharing bro
My pleasure bud. Those leaf spring rigs are tough, but that makes it fun to try squeezing more performance out of 'em. Thanks! -"Angry" Dave
@@AngryDavesADULTRC rite on. my first run totally sucked. Pinion and spur was off cause the motor wasn't seated rite. Rear drive shaft totally tight causing the ujoint knuckle to bind. I was pissed. Waiting on parts for 2nd run .but need to really loosen that suspension up and degrease everything first
Great video dude.
Thanks man! -"Angry" Dave
Great upgrades,cool video
Thanks! Always fun to upgrade. -"Angry" Dave
Great fix on the grub screws I have to do the same thing with my vaterra 👍
Thanks! Yeah when I realized it was just a grub screw I was a bit pissed. -"Angry" Dave
Good upgrade.
Thanks, hopefully I won't have this problem again. -"Angry" Dave
It looks fun
It soothes my soul whenever I am with my beloved your UA-cam
Thank so much! -"Angry" Dave
Pretty cool man very informative
Thanks brother. -"Angry" Dave
Hell I’m loving your content it’s fucking awesome finally that’s freaking awesome I’m looking to get me a hard body for my vaterra rc blazer which I’m loving how it is but damn them rc4wd hardbody prices are freaking insane I found one for 90 bux all painted and ready to be mounted on
Thanks! Best of luck finding reasonable prices these days. -"Angry" Dave
I don't have any rc4wd vehicles yet.i have lots of bumpers,winches, predator trax,benpak lift.i sure have my eyes on that intimidator pulling sled they announced end of last week.500$ big chunk of change.
They make really nice stuff. They are definitely more for the scaler than the performance freak. They can be made to perform pretty well, but between the cost of the truck and then the upgrades it won't be cheap. The pulling sled will be most attractive to people who put on events. For them it's worth the $500, it's another event they can add to their comps. -"Angry" Dave
Cool video,Dave. You might notice that your front shocks restrict movement a little, I ended up going with 80mm shocks with the Gelande2 hoops. I also got a little more travel in the back mounting the shocks to the cross member, 2nd hole from the outside. I hate when I buy something I don't fucking need!!
Just playing with it on the bench I can tell it's got more travel. I can't wait to get it outside. I don't love mounting the rears to the crossmember 'cause they rub the leafs, but they do have more travel. I'll have to modify the shock mount to add clearance. Cool, another mod to do. -"Angry" Dave
I love this truck looks awesome 😎
Thanks, me too. The brush-guard bumper makes it. -"Angry" Dave
❤️
Would have been nice to see at the end, the new flex movement 🤔
You have to watch "Cheap Trailfinder 2 Mods" for that. That was the original vid and run, but the truck broke down at the end. The " More Flex" vid is just a repair and re-cap of the mods. Thanks! -"Angry" Dave
Nicely done. Really digging your channel. Looking forward to the trailing vid. I've dropped both drive shafts due to the piss poor design. I used your heat shrink tip on the replacement for the front and when I lost the rear I used spare parts from the front to get it running again and more heat shrink. I need to get off my ass and get to work. --Santa brought me Emu shocks, 90's for front and 100's for the rear and a set of Red leaf springs for my TF2 LWB. On a side note I've done the interior and added stripe decals to exterior, as well as scale items to the bed, added the lift kit and simple lights. I also flipped the plate for the battery so it sits more to the front and added some lead weights to the front end. For kicks I busted open a stereo bluetooth speaker system and re-boxed the two speakers into a piece of foam and stuck it into the back seat so I can listen to some tunes as I roll. One of these days I'll start posting vids on my channel...Happy RCing!
That sounds like a nice rig. I've thought about doin' that with Bluetooth speakers. I would love to have some tunes in the truck. I still want a light kit too, and I think I'm gonna get some 1.55" wheels for it and finish out under the hood so it's super scale. -"Angry" Dave
I hate the rc4wd grub screws. Pos is what they are. What I did with mine is put the threaded end up in my drill then spun it fast and filed them down so it would fit all the way through. Once I got them all fitting good I soaked them in lock tight lol!
Nice! Whatever works, 'cause the stock ones sure don't. Lol. Thanks! -"Angry" Dave
Why did you mount the rear shocks on the outside of the frame? Any notable difference.
For fuller travel. Sometimes they bind at extreme angles when they're inboard. Thanks for watchin'! -"Angry" Dave
Really nice my friend, very informative. 👍👍👍👍👍
Thanks brother. Hope it helps someone. -"Angry" Dave
I can say I have been there when it comes to buying parts before diagnosing it and I have to ask what brand are your tires
They're the stock RC4WD RTR tires. Reversed direction, custom cut, and Crawler Innovations Deuces Wild single stage foams. Thanks for watchin'. -"Angry" Dave
@@AngryDavesADULTRC anytime and thank you
Your tire rotations are backwards. They are made to have the point of the tread patern facing the front to clear mud from them as they turn . Maybe you knew that maybe you didn't either way thought I'd let you know. Peace ✌️
Yes, knew that. They're backwards on purpose because they bite better for crawling that way. This truck doesn't see mud so I don't need them to clear. This rig is more trail running anyway so it doesn't even need to crawl that well. I'm not running them on this truck anymore either, got a set of RC4WD Good Year Wranglers. Thanks for watchin'! -"Angry" Dave
Who makes that servo mount my man?
Custom made by me. Thanks! -"Angry" Dave
@@AngryDavesADULTRC I need one that’s the best idea I’ve seen I want to add the v8 details but no room
@@AngryDavesADULTRC what would it take to get one?
@@scale_nerd356 Check out GCM. They used to make an aluminum one. -"Angry" Dave
@@scale_nerd356 I thought about selling them. If I saw enough interest I might make a run and offer them through my website. -"Angry" Dave
This guy seems to think dropping the F bomb every other word makes him cool wow it’s amazing what people do to make their self try to look cool
This guy is too FUCKING stupid to realize that some people talk like that and don't give two rat's ass fuckin' in a ranch dorito bag if you think it's cool or not. Go fuck yourself. -"Angry" Dave
Grub screws 🤣🤣
Fore sure. What a bone-head move. lol. -"Angry" Dave
Did u Get more flex?
Definitely. I can get more in the rear too by moving the shocks to the frame x-member. But I need to fab shock mounts so the shocks don't rub on the leafs. -"Angry" Dave
@@AngryDavesADULTRC nice
Good stuff man. I have done similar things in the past where I order something and then I don't need it lol. That's one sexy looking truck !
Thanks, at least I have a spare now. I love the look of this truck too. -"Angry" Dave
Dave love your Vids Man 😁 fantastic info, great how to Build, grub screws are a fuckin Pain in the Arse, You did a great Job eventually mate, looks Great , BOOOM😎 Great build Video Dave👍 weres the fuckin Hole 😂 we are all Assholes 👍😂👍
Thanks man. Yeah, grub screws suck.-"Angry" Dave
Hey man well done, diggin the channel. Though I am having trouble figuring out the conversion for ounces to fuck ton.😜
LMFAO! It's easier to covert from pounds, the numbers are smaller, lol. Thanks! -"Angry" Dave