MultiPlus II Performance and Install!
Вставка
- Опубліковано 3 жов 2024
- The Multiplus II 2x120 is a great Inverter option for 50 Amp RVs. This video is what we have learned from using it and how it has worked for us. This Inverter is the best power solution with the most features I have seen. It has impressive output and gives a lot of capabilities to your RV. While it has many things it can do, the main feature is that we can have clean reliable power anywhere without a generator including power for our RV fridge while we drive and supply a boost to our shore power when 50 amp isn’t available. In the video I also walk through the details of installing it on our RV. Here is the link to the install diagram.
allaboutrvsinf...
Inverter Upgrade.
Victron Multiplus II. bit.ly/3iSpIIQ
RV Solar Connections. Use Code "AllAboutRVs5"
Victron Inverter MultiPlus II bit.ly/3t6OOpL
Multiplus 3000 Inverter for 30 amp Rvs: bit.ly/38Y7roZ
Amazon amzn.to/3bK7252
USB adapter to change inverter settings bit.ly/3x2JfuF
Amazon amzn.to/2AuEKyg.
Bluetooth adapter for monitoring and setting Inverter Hybrid amp limit.
bit.ly/3amtuWE
Amazon amzn.to/2Z8iEfc.
Battery monitor
New Smart Shunt. bit.ly/3zalbb1
Option 2 for battery monitor is BMV-712.
Amazon. amzn.to/3dTs16Q
amzn.to/2Z9lEYN. T-Fuse 400 amp
amzn.to/3vdkAAw Inverter Battery Disconnect
amzn.to/3bNG13e. Battery Disconnect
amzn.to/2Tev7dB. 4/0 Wire to connect batteries to inverter
and batteries in parallel.
amzn.to/3vekSH3 Lugs with heatshrink
amzn.to/2X9do8O. (Size 4/0 with 3/8” ring) Lugs for the wire to
crimp on to the wire I would get a set of 10
amzn.to/2T7508v. Heat shrink after you crimp wires
amzn.to/3495hNd Cable Ties to keep it clean.
amzn.to/3oIssrc Bus Bar set (
amzn.to/3vdS5mj DC to DC Charger
Solar
amzn.to/3fHL4Dp. Solar Panel Disconnect.
amzn.to/3uffNgD. Disconnect Box
amzn.to/2WOK0pp. Breaker for less than 42v
amzn.to/3e1xEjp. Charge Controller Victron
Tools
amzn.to/3e8VnxV. Crimp Tool
amzn.to/2XgO6oZ Cable Cutters
Here is our Amazon page for our favorite gear. We will be adding more products as we find more products we use and love. As an Amazon Associate, we earn from qualifying purchases.
www.amazon.com...
To save 10% on solar setup at Renogy you can use the linkbit.ly/31FTO73
And enter code “AllAboutRVs “
jaredallaboutrvs@gmail.com
Passport America WE USE THIS ALL THE TIME. passportameric...?rfsn=2638351
Harvest Host Link harvesthosts.re...
Lithium Batteries bit.ly/2WZpYr9 Save 15% with code “allaboutrvs”
Need more info? Here is our Website: allaboutrvsinf...
Membership link
/ @allaboutrvs - Навчання та стиль
Am I the only one who has to watch these videos 4 or 5 times and still picks something new up every time? Great video!
Lol. Definitely not alone!
I am with you on this one
Me toooo!!! Gooood solid info!!!👍😃🍻
Nope! Lol
probably a dozen times by now...
Finally, a video that gives this seriously novice RVer a great overview that takes the intimidation away. Still have much to learn but this gives me a base to build upon.
You are ‘da bomb’!!!!
Instead of one T-fuse I used an MTBF fuse on each positive battery terminal, just a slight edge on safety. I also put an on-off switch on the positive side (after the shunt of course) so anytime I have to work on the positive battery cables there is no ground connection for them to short across a random wrench or dropped screwdriver.
The walk through of the wiring diagram may have been the best I've seen. Well done guys!
Heck of a great AND clean job! Love the shelf.
Thanks JD. Love your new RV by the way. It looks great!
@@AllAboutRVs thanks my friend! Work in progress.. lol
Yes
Clean install. Would you consider on your diagram listing the wire sizes between each thing.
Finishing up the install of our MultiPlus II this week. Very timely video. Thanks for the diagrams.
Hope they help!
I'm an electrical engineer, and I'm impressed with the level of design detail in this. I would recommend some better lugs for the high current cables, with more metal and surface area to connect to the batteries. This implementation is forcing a lot of electrons through some (IMO) undersized cable lugs, which can get hotter than they should. Nice job, especially on the fusing and disconnects.
I am not an electrical engineer and I got lost almost from the beginning.
I would like to see a video on your dc to dc charge set up / install from the truck.
Thanks for the update Jared.. Glad to hear it's all good 👍. I've had one on back order. Looking forward to getting it.
Nice! I think it will be a great addition to your setup.
@@AllAboutRVs Actually ours rig is 30A, so this would be for a different project on a 50A coach.
This is the second time I’ve watch this video because I figured out a way to get the multiplus II to fit in my compartment. Going from the original multiplus Will make everything operate so much better. Thank you very much for the video Jared.
Thank you! thank you! thank you! Brother, I cannot thank you enough. Your videos, diagrams and knowledge that you have passed on, has taken the fear out of doing this setup. My father and I were able to put together pretty much the same system you showed above...including the install of the cerbo gx. Took us 2 days to assemble, one day to sort everything out and install and we went active on day 3. Following your diagrams and videos allowed us to have a trouble free and very successful install and first flip of the power over to batteries to run our rig! We have been on battery power now for 48 hours and it is awesome! Our whole 50amp rig now runs off batteries!!! Thank you Jared!!
Hi...considering doing the same. Confirming you have 50a power powering both sides of you breaker box...just as if you were on shore power...? Thx!!!
Great video Jared! installed our MPII a month ago. Just finished a trip to 30 amp spot and it worked great. Ran both a/c units. batteries never got below 80%.
How much battery capacity do
You have?
@@ChadLower 400 ah
@@oldguysrule5895 very nice. How long we’re you able to run both ac’s?
Why would your batteries wear down if you were plugged into 110v/30amp AC shoreline connection?
@@mountaingrownnomad4212 Air conditioners draw more than 30 amps so the MPII makes up the difference from batteries - and not always sunny enough for solar to keep up at the same time (which is why battery bank sizing is so important)
I've had the Victron MultiPlus 3000 for 3 years with 4 BB batteries and 600 watt of Solar. My rv is a 30 amp rv and 3000 watt Onan QD. We love the system.
You do SUCH a great job of educating us and explaining the what and why - keep it up! Thanks!!
Jared - your wiring diagrams and videos are awesome and very much appreciated ....just hit the switch on my 300 amp hour battery bank / Multiplus 3000 and Victron dc to dc charger and it is awesome. First evening on the road arrived in a thunderstorm and just ran the ac on batteries only to wait out the storm .....thanks again for taking the time to share so much!
I also have a Multiplus 11 48volt 3000watt
In Australia 🇦🇺 and love it I can run my 240 volt hot water and Air fryer and electric kettle and induction cooktop with no issues
But obviously not at the same time
Your schematics are great. It makes total sense of it. Thank you!
Great Job and it was really a pleasure meeting you and your wife.... Hope we run into each other again in the future.
Great Review Jared! Just want to make sure I fully understand your setup. Tell me if I've got my couple of points right. 1) Your switch marked RV Load Disconnect cuts power from the MPPT to the Batteries. 2) Your Bus Bars are used for 12V supply to your 12V Breaker panel section and your Tow Vehicle Charging from either the MPPT or Battery as situation permits, if MPPT has higher voltage than Battery, it will charge batteries and feed 12V Fusebox. (Sorry not sure if MPPT is powered from Solar only or 12V battery or Both as available.) Thanks for all your hard work!
Jared- another great review! Thank you for taking the time to share your techniques and processes! Your'e one of the channels that I follow and take a lot of advice from! I appreciate everything you and your family does for the RV community! Stay safe out there! Cheers!
Nice job...the diagram helps tremendously as you are explaining. I watched it a second time with the diagram in my hand.
We also use a Micro-Air Easy Start on our Air conditioner, which is 13,500 BTU. We're looking at buying a Victron MultiPlus 3000 watt to power it. We were worried we might need to scale up to something that's 5000 watt or higher. Glad to hear it's working for you guys!
Works great for me, too.
Thats an ultimate build. So cool
This inverter fits my needs perfectly, thank you for sharing. And I'd be interested in all the bells and whistles that you may add (like you mentioned in your previous video). Great job on the install, it's very clean.
Thank you very much for explaining who this model is for. Looks like I only need the original multiplus for my van build.
Yes great choice MultiPlus I will serve you well in a van build
You Rock!!!! Thanks so much for the Diagram! Now if the multi 2 will come available I can finally order it! But again thank you so much for making the video!
Thank you! For all the great information in videos. Easy to understand and great resource links. 😎😎
your vids are GREAT!!
Ive been ready to install an inverter for the past year and a half, but ive not been able to get the information ive needed....til now. thank you...
its nice to have the parts list to work from when trying to choose parts, but there is way more parts (options) listed than is shown in the video.... it would be so helpful if the parts shown in the vid were separate from the optional parts... OR, mark them as optional....
I watched your previous video using the SPS unit, only to find out the SPS unit is no longer made, which brought me here... and now, as im trying to make a "to purchase" list, I find myself confused as to which of the parts on that list is needed for a complete install of a victron inverter/charger on a motorhome.... I want to run 1 AC unit, and still have power to operate the microwave for a short period... the MH has 30a shore power, and an 800amp battery bank.... thanks for any additional help that you can offer.
Great point. I am going to work on a parts list video next, good idea.
Great video and explanation. Picking up our new to us coach next month and then seriously move forward w/ a solar setup. I'll keep watching!
$30 for this and diagrams and $30 for the other video on calculate solar thanks for the info!!!
Please continue to provide more videos on testing and smart adaptations around the MultiPlus II. I am moving in this direction myself, also using newer Victron tech, tho at a slower pace. Thanks for being there for us.
Great video Jared. I installed this new inverter last month and it has been working flawlessly. Love it! Glad to hear you prefer it over the old Multiplus and SPS.
Congratulations on getting one! Glad to hear it’s working for you. I saw on the forums they are working on an update to display line one and line 2 info properly. I’m assuming that will work for Bluetooth and for the Cerbo GX. It’s one thing I love about Victron is they continually innovate and update.
@@AllAboutRVs Yes, I saw that as well. Victron seems to be very attentive to their customer's needs. It sounds like the firmware update is still a few months away but I'm just glad they are doing it! I love all your videos Jared. You have a very calm demeanor and do a great job explaining things concisely. Well done!
This is way awesome. Now I have to get one and figure out how to wire it (run the 50 amp shore from the back to the front pass through, and back to the middle where the breaker panel is.
Beilliant, professional, top marks. There's a lot of videos out there on solar, inverters etc., but this is the best I've seen. So good, i would like to copy that. Subscribed!!!
I have one on back order, This video is just what I needed.
This was awesome! Do you have another video that shows how you run the inverter power to the panel? You show the conduit, did you remove the underskirt and then run the conduit from the basement to the distribution panel?
Exactly what I’m thinking of doing!
Excellent Job Jared! Truly excellent. Your Installation and your visual schematics are spot on to how I would design and install equipment back in the day at KPNX Ch 12. Wish I was there to help you with that project! It must have been an overall fun, but challenging install. But now that you have completed it- No Regrets only pure satisfaction.
Awesome video ! That's EXACTLY what I need ! I do have a generator, so this will be perfect ! Thank you!
Great video!, I just installed my Multi Plus 2 with 4 - 100 ah battel born batteries, thanks for the diagram!
Glad it helped!
I am always looking forward to your videos. I don’t have a fifth wheeler but the info still the same. Thanks
Great review! I was looking forward to the MultiPlus 3000 with manual switches now I'm' inline to get the Multiplus 3000 II. Thanks
Great presentation Jared. Thank you times ten. * I did notice that a few of your links to components go to the wrong component (3/12/2022).
Thanks I’ll check the links
Great stuff Jared! I'm just waiting on delivery of my Multiplus II! (I've got a Multiplus if anyone wants it - new in the box and never installed)....
I’d actually take you up on that. How can I arrange buying from you?
@@strongholdhealth Sorry - sold it already to a full timer who needed a second unit!
YOU HAVE EXCEEDED YOUR "SO" QUOTA FOR TODAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
So... what are you trying to say?😉
Thanks so much for this video, diagram ect. this really helps me understand how al this goes together.
That is an impressive and super clean installation. 👍
You bet- best wishes!
Great video, missed the boat. Lion energy use to be 799.00 when they first came out. Now it's 999.00. at least we can get 10% off. Thanks Jared
If you're handy you can get 280Ah of Lischen or Eve LiFePO4 cell shipped from China for ~$500 and add a $100 Daly BMS and have nearly as much capacity as 3x those for less =)
@@andrewfidel2220 I will try that way, ty
Great job, I have one of these on order and will be using your diagram as a reference when I install.
Very impressive Jared!
Great video, very helpful. I didn't see listed what size fuse you used coming off the battery and going to the DC busbar. Thanks.
Jared, the information you provide is priceless. You are the go to person on UA-cam when I have a question or concern. I would like to ask on this I think I understand but I would really like to see the lines coming in from the shore power and the lines going into the breaker panel the the difference of the AC and DC panels I think everything else is somewhat clear, I do not have solar yet but I want an inverter to be able to visit more US or State parks. Thanks for all you do.
Incredible power management setup. Love the clear explanation and masterful diagram. Where’s the best place for me to find more information on DC to DC battery chargers?
Thank you. I will be doing a dedicated video on it.
Wow! Looks amazing. Sometimes I think you start talking in a different language. One I definitely don't understand... 😂
Dude, are you psychic or something? We just got a Jayco White Hawk 29BH which has a 50-amp system and you have just described my ultimate power system. Your content and presentation are great and I am an avid consumer of your videos. This one (as well as many others) I've watched a few times now. In part because it is oh so relevant to where I want to get with my Jayco. But, where do I start? I can't afford a big bang approach. I need to spread out my cash flow and build out this configuration over time. Can you do a video as a corollary to this one that lays out a logical sequence of steps to a build-out over time? Here is what I'm starting with: 1) a go Power 190-watt solar panel roof-mounted; 2) a Go Power GP-PWM-30-UL Bluetooth solar controller mounted in the bedroom; 3) I have upgraded the AGM 88 Ah Marine batter to a 100 Ah Lithium; and 4) a Progressive Dynamics PD4560 power converter on which I've moved the mode switch to LI. This Jayco does not come with an inverter. My current upgrade plan is 1) expand the battery bank to 200 Ah in a box on the tongue; 2) install a hardwired EMS; 3) add the Victron 500 amp SmartShunt; 4) add the MultiPlus II and 400 amp T fuse; 5) add 2 x 190-watt solar panels; 6) upgrade the PWM solar controller to MPPT, and 7) increase battery bank further to between 300 and 400 Ah (perhaps moving it inside the front storage area). If lucky, I'll complete all these steps by end of 2022. But it might take me well into 2023. Is this plan reasonable or short-sighted? I suspect many of your subscribers would love to see you outline an upgrade path, and if you want to critique my plan I promise I can stand the embarrassment as long as I learn from it.
Great inverter class Jared! Thank you!
Thank you!
Nice work!... BTW, on your diagram:
You may consider connecting the "RV Load Disconnect and Fuse" on the "load" side of the (+) Busbar.
That way the MPPT can still charge the Batteries if/when you decide to disconnect the "DC loads".
Also, have you considered a "Victron Lynx Distributor"? (it makes for a real clean look)
I have purchased the Victron distributor and have a similar model GD RV. I am planning this system in my RV.. I’ve built a backer board and the made shelf brackets and am starting to lay out the parts. I’m going with a larger 150/100 mppt and space is starting to become an issue….the distributor and the 150/100 charge controller add a considerable footprint to what Jared shows here.
Look at a raspberry pie running the Venus OS, much cheaper option over a GX. I love mine and it was like $60 vs $300-$500.
Great video. I have a 4 six volt battery system with a GoPower 3000 inverter.
I’ve bought all the Victron stuff including the 2x120 multiplus.
Even tho I will be installing in our Class A - your diagram is spot on for me.
Question - I bought the Lynx distributor (and also have buss bars). Do you regret not getting the Lynx? Or did you not think it was needed?
Got me wondering if I should even use it.
Hi Jared!👊🏼 I absolutely Love your instructional videos and hope you don’t mind me copying what you’ve done! We just upgraded to the 2021 GD 303RLS so I think everything should mate up quite nicely. BTW, is there a particular reason you use the Li-ON Batteries🤔? Truly hope to run into ya one of these days just to say thank you in person, you’ve shown us a lot and I’m grateful! Best wishes
Thank you! I hope the diagram helps. The Lion Energy batteries have been very impressive and performed well. We originally switched to them partially because of size and output. We have not regretted switching to a Lithium Iron Phosphate (LiFePO4) battery.
@@AllAboutRVsLion Energy Batteries are available from Costco for 699.00 a piece perform just as well as BB. We have four. However I am looking at KiloVault CHLX 3600W and built in battery warmer. Cheaper than 4 Lion Energy 1300UT Safari Batteries
@@gregoryhenriksen957 Thank you for that info...I’ll research them as well.
Jared have you done a video of how you mounted the bracket that holds the batteries? I love this set up and want to mimic it in our rig as we have the same GD Refelection but we are a 303rls (which is the same front compartment). Would really appreciate a step by step to do that. Thanks in advance and we love your videos!!!
@AllAboutRVs - Yes - would also like your supplier for the shelf hardware (& ideally the entire parts list for your install - as requested above).
Novice here, but can I still have a Generator following the schematic as shown? Otherwise, thanks for the lessons, you have made a difference in the life of my wife (Hospital Nurse, I'm sure there are more too) in theses troubled times and how I can help divert her attention away from the yuk and to an enjoyable time away from it all! Ty.
AWESOME🔥🔥🔥
Watched this video like 5 times and probably will watch many more. I was looking at upgrading my 5yo charging system on my 2017 Thor Outlaw 38RE to add LiFePo4 batteries and solar. I think this is my future setup. Placed my order for most of the larger parts yesterday and am now on a waitlist for the Victron MultiPlus II 2x 120V (expected by end of June). Now trying to mentally retrofit this system into my existing using wire schematics and order the incidentals. Fun times. How about a follow-up video Jared? I'm curious what you have tied into the Cerbo GX. Thanks and keep the content coming!!!
Looking at the video installation it looks like you have upgraded your mppt controller but not reflected on the diagram? Nice, clean install !!
Great Vid! Thank you. So, I see you've switched to the Smart Shunt and no longer have the BlueTooth Battery monitor/display. Is this because these two pieces of equipment are redundant?
As always great informative vidéo and this one represent a golden key to the solar solution ! On your diaram can you please tell the value of your 2 other fuses ? Thank you.
Great video as always!
Hey Jared. Hope you're doing well. We have a 2023 Grand Design Reflection Travel Trailer and an Onan 30A portable inverter generator. I am getting ready to install a Victron MultiPlus II Inverter. Since I'll only be using the generator with my power cord, when I am not on shore power, is there any need for an ATS? BTW, your videos were a HUGE help when I installed my two Battleborn GC3 batteries...thank you! The inverter is the next step!
As always, great video. I would love to see a "shopping list" for things in the diagram. I would like to do the same install for my 50 amp GD, and build in stages.
Thanks, I’ll have to work on putting one together.
@@AllAboutRVs Yes, great video and diagrams. However I am also building this set-up in stages. I am Solar prepped and have an onboard gen and have the same three Lion batteries and Victron Multiplus II on order. Can you post a diagram and shopping list sans the solar?
Dammit! I just installed a multiplus in my 50amp RV with with your manual buss switch . Ugh! Did not know about the multiplus II, I would have gone with that if I did. Oh well. Your recommendations and directions were great for the way I installed.
Well, you could have been like me...ordered the original Multiplus and received it 31 days before the Multiplus II came out...so I can't return the 30A version. Just waiting on the new Multiplus II.....
@@leoreap2703 I'm finding the multiplus single phase is working just fine for me . So I'm just having extra feature envy. If I get another 50 amp trailer I will get the multiplus II split phase.
@@darkfred62 Ton more metal in the older one that is truly built like a tank! New one, well, not so much....
Also love your videos.
This is awesome info! Thanks so much!
Super Helpful! Thank you
It was never actually said...so I am confirming -- that this setup (w power assist) will feed my trailer a full 50a service - whether plugged into shore or not. Yes? If plugged into 30s shorepower, it will compensate by drawing from solar/batteries to power the breaker box w 50a. Yes? Sooooo we are as good as being plugged into 50a shore power? Do I understand that right? Thx and you do an awesome job. No wasted time. Great editing! Can anyone confirm?
Close. It will assist and additional 2400 watts. A full 50 amp service is 12,000 watts and a 30 amp service is 3,600 watts. The Multiplus inverter will assist adding the 3,600w 30 amps with the 2,400watts from the inverter for 6,000 watts total you can use. When on a 50 amp service everything works as normal as it passes through the full 12,000watts. I hope that helps!
@@AllAboutRVs Got it...thx!
Thanks Jared. We love your videos, great information. I'll be installing the 2x-120 MP in our motorhome and was wondering if you implemented a bypass for the inverter. Victron's "Wiring Unlimited" document mentioned a bypass but I have not found any actual examples out in the wild. Thanks again for all you do.
Great video as always. I, of course, just installed a Multiplus I on my 50A RV using all of your diagrams and videos and this thing comes out. I'm still very happy. What specs are you using for your BMV-712 and the Multiplus with your Lion Energy batteries? My SOC is always reading off.
Jared, How are those small battery posts working on the Lion Batteries ?
That has been the only thing holding me back from getting those Batteries. Your install is SUPER clean, nice job.
Thank you! I haven’t had an issue with the terminals. I’ve been able to tighten them down and haven’t had anything come loose. This is the third configuration with these batteries too so they have been tightened taken apart and re tightened a few times. When I make the connection you can feel when it’s secure and I don’t keep forcing beyond what feels necessary.
@@AllAboutRVs thanks Jared
Elegant video and diagrams. Did you consider one of the all in one solar charge controller,inverter like Growatt SPF 3000w 120v/240v Solar Inverter? I am considering the advantages and disadvantages of 24 volts.
You should also mention that the Magnum MSH3012 RV has the same dual in dual out and smart phase
Good video, feel sorry for you guys having to mess with the 120volts, totally strange idea. Hope 240 volt will become standard because you have some nice products over there that we can’t use but really want to buy 😢
Thanks. Excellent Info
For those RVers (including myself) who want to "copy/paste" this system, and are intimidated by the DIY aspect, or don't have the skillset...Having this system built and installed at a reputable company is VERY CHALLENGING! I've contacted numerous service centers and they don't call back, they don't email back...I guess business is so good they don't care!?! CAN ANYONE RECOMMEND a company in the Los Angeles area to build and install this system?!
Awesome video... thanks for sharing.... did you do the install yourself? Looks amazing!
Thanks, yes installed it myself.
Thanks for the great video!! Question and sorry if you answered this already.
1. You talked about the orientation of the inverter as vertical. Can you mount horizontally?
2. My rig is “inverter ready” with wiring ready. Question is that I have labeled “inverted outlet” plugs in my rig… if I wire the inverter with the “inverter ready” wiring. Will it only power those inverted outlets?
3. If so, if I want to power the entire rig I should run new wiring from inverter directly to the rig panel correct?
Thanks for your time and hope to meet up on the road somewhere.
Hey Jared, love the video. Would you be able to put up the design of your battery box on this link. I really like to cleanliness of those lion batteries together. Thanks
Such an in depth walkthrough, so much to unpack! I’ve watched this scores of times and studied the wiring diagram, but still have a few questions.
I understand you run the AC wires from the MP II to the breaker panel through PVC conduit. Should I use the same 6 gauge THHN wire from my Automatic Transfer Switch to the MP II, and should I also use conduit for that run as well? If so, can I use the same conduit to run both sets of wire? (My ATC & breaker panel are close to each other, but a long run from the MP II).
I don’t yet have a solar system, but plan to add it in the future. Is there any reason I shouldn’t use the buss bars now when wiring my system to connect just the battery bank, MP II, ATC, and breaker panel? (don’t plan on incorporating a DC to DC charger)
My thought is that this will simplify a future solar integration.
Thanks so much for all you do!
I have similar questions. Look at the video again and at 1:17 you can see the conduit for both runs into and out of the inverter. Also at this point it looks to me that the THHN wiring is different gauges. The green ground looks thinnest (10ga?). Black and red hot wires look about the same (8 ga?) and the white neutral looks to be the largest (6 ga?). Using THHN allows you to do this where you can’t with Romex. THHN wires have higher amperage ratings than their Romex equivalents. And it makes sense, as more current (from both hot legs)will return through that white neutral wire.
I've been using your diagram for my Multiplus ll install with all the same basic components for the exception that I'm using a Linx Distributor instead of the Bus Bars and separate fuses for the solar controller and dc to dc charger that will feed into the Linx Distributor as well as the smart shunt....I would love to see wiring diagram that included a Linx Distributor.
Hi Jared I love your videos. They have just the right amount of explanation without going over the top for me.
I have a question about the Multi Plus II inverter and if I should upgrade. I currently have the MultiPlus 12v 3000w inverter with an SPS on a 50 amp RV. Everything works with the exception of not seeing what is going on with L2 on my Color GX. Other than that do you see any advantage to upgrading the inverter and eliminating the SPS.
Thanks.
Thanks!
Jared, thanks for such a great video and resource for us. I’m getting ready to make the jump to lithium batteries and this Multiplus II inverter/charger. Question: does this unit have a built in transfer switch when going from shore/generator power to inverter? Is there a necessity to physically flip a switch of any kind? I need an automatic system to lessen the human error factor. Thanks again for your wonderful explanation and video.
Nice installation job. Apart from the electrical side did You fabricate things like the battery tray or where did You get it. I am doing an install on a class A and find mounting heavy components is trickier than the wiring up of things.
I have your "old" setup with the switch and the MultiPlus. But looking forward to the MultiPlus II 2x120 getting here to remove the switch! Been backordered for a bit now. I'd love to see how you setup your tow vehicle charging. I've been contemplating adding that as well.
Jared to Jared question ⁉️
@@d.pollard5962 ALL THE JAREDS!
I'd like to use victorian but I find it so confusing with so many products versions on their catalog.
Love all your videos! Great job! What type and size of flex conduit did you use for the AC IN and what type and size of PVC conduit did you use for the AC Out 1? Thanks.
So on this build did you basically just ignore everything wiring related on the RV that was existing except for the rv breaker panel? It looks like you even took the existing power input and rewired it to go to the multiplus? And run new wires to the breaker panel? Did you leave existing point of load wiring and plugs inside? I just bought a toy hauler and planning my build out so I'm trying to get an idea of what I need to keep, rewire, or replace.
Great job on the install! Do you happen to have any pictures of what route you took with the main AC conduits to get from the front bay to back by the main breaker panel? I have a 28BH and would like to do a similar install. Thanks in advance!
I have a 2020 28BH. My breaker panel is behind my couch - in previous years is it at the back of the camper? I’m thinking if I put this right next to the breaker panel then I don’t have to use conduit, right?
Super 😊👍