HOW TO INSTALL A FUEL PUMP IN A 2002 GMC Yukon

Поділитися
Вставка
  • Опубліковано 17 жов 2024

КОМЕНТАРІ • 38

  • @mrkttrdr2919
    @mrkttrdr2919 2 роки тому

    Watched dozens of these pump change outs and urs is by far the cleanest tank and rust free clamp ring, man that must be nice to be where u are

  • @Chris_Sokol
    @Chris_Sokol Рік тому +1

    I mean, this is the “correct“ way to do this, however, I just cut a flap in my carpet under the second row seat and used an angle grinder to cut a flap door right over top of it. Took about three minutes total to have access to the fuel pump to change it out.

  • @samsen3965
    @samsen3965 5 років тому +14

    Very useful and more power with you. However, for heaven's sake, PLEASE CUT OFF that annoying music. Really struggled to hear you here.

  • @tommysingleton2881
    @tommysingleton2881 3 роки тому

    Thanks for making the video very easy and understandable. you did skip a few points while doing it but the visual was very good.

  • @The_M-An-M
    @The_M-An-M 3 роки тому +4

    Yes ramps are safer but only WHEN they are both facing the same direction (how exactly did he get the truck on like that anyway???) and BOTH wheels are actually FULLY ON the ramps. Lucky this didn't turn into a horror film in a hurry! Perfect example of how not to use ramps. Did have some useful information though. One more thing...leave the key forwards a few seconds each time to give the pump time to pump.

  • @CandJ4kids
    @CandJ4kids 2 роки тому

    How many miles does your Yukon have on it. This will be my second time replacing the fuel pump, the pump is fine, however the float is not working.

  • @kingjay239
    @kingjay239 2 роки тому +2

    Seeing that rear tire mid way down the ramp gave me severe anxiety lmaooo.

  • @seductivslim3400
    @seductivslim3400 3 роки тому

    Great video! This is the issue I'm having crank no start.

  • @dreamfries
    @dreamfries 5 років тому +1

    Broke Both connections that go to the Hard gas lines but found them both
    with a 90 degree bend and they are 2 different sizes i just drilled out
    the plastic bits from the plastic gas line and put in the new fitting
    and JB welded reinforced it for extra extra and i also broke the nipple
    from the plastic line that goes into the charcoal canister and piloted a
    hole big enough to fit the broken nipple piece and JB welded that in
    there too it fit snug the step drilling method helped in finding the
    exact hole diameter to fin the broken piece in so yeah that's how i
    fixed 3 broken hose fittings don't use brute force when dropping the gas
    tank i did because i did it by myself and didn't watch a video but my i
    always fix what i brake buying a new gas tank boy u crazy hahah there's
    always a solution to everything. fixed it all for like 25 bucks 2
    fittings and a pack or jb weld 2-1 oz tubes call it done.

  • @pcdubya
    @pcdubya 6 років тому +2

    Nice video man, thanks for taking the time!

  • @angierussell387
    @angierussell387 3 роки тому

    what does the fastener on the fuel tank straps look like? do you happen to know a part number?

  • @toolboy1000
    @toolboy1000 6 років тому +3

    Hey if you have to show someone how to disconnect the battery before removing the fuel tank maybe they shouldn't be doing the job ?

  • @artwookie
    @artwookie 6 років тому +2

    How do you drain the tank?

  • @Caboneski2
    @Caboneski2 6 років тому

    Thanks for the video, only thing was I would prefer jacks over ramps..better peace of mind.

  • @CarsAndDrums
    @CarsAndDrums 6 років тому +18

    Could've really done without the music lol

    • @chaneljay9099
      @chaneljay9099 5 років тому +1

      Lol yeah otherwise great video

  • @richarddavey567
    @richarddavey567 Рік тому

    .....handy....just in case....and a first Aid Kit....

  • @tylerrudolph4297
    @tylerrudolph4297 6 років тому

    But what size are the gas tank strap bolt size

  • @kimadamswatlington4691
    @kimadamswatlington4691 6 років тому

    how did you wire it up

  • @alisaleh2509
    @alisaleh2509 7 років тому

    Is airtex good fuel pump ?

  • @larryleisuresuit9584
    @larryleisuresuit9584 7 років тому +1

    then you get to figure out why the check engine light keeps coming back on. happy searching.

  • @williebaker1949
    @williebaker1949 4 роки тому

    Why wont my new fuel pump sit flush

  • @eng.algareebsaudi1648
    @eng.algareebsaudi1648 5 років тому +4

    It's not easy as shown i did it it was terrible

    • @garychambers5930
      @garychambers5930 3 роки тому +1

      I have done a couple of these and you sir are correct
      It's a complete pain in the ass

  • @breadhotlist376
    @breadhotlist376 5 років тому

    Where are you?

  • @rileyen4608
    @rileyen4608 7 років тому +3

    But... The video is 7:41 seconds....... Not 5:00

  • @richarddavey567
    @richarddavey567 Рік тому

    You for got to pump all the gas out of the gas tank....

  • @donnahudson6756
    @donnahudson6756 2 роки тому

    Flat head screwdriver AKA butter knife lol

  • @gustavocardenas2100
    @gustavocardenas2100 2 роки тому

    many points skipped (the most important ones) and difficult!!!!

  • @toolboy1000
    @toolboy1000 6 років тому +2

    Did you even check your driver side Tire on the ramp it was already on the downward slope it was not done correctly very dangerous you going to squash your ass up underneath

  • @richarddavey567
    @richarddavey567 Рік тому

    You failed to follow safety rules....you should of had a fire exstingusher....

  • @aapexco
    @aapexco 2 роки тому

    Has to be the most annoying background music ever. Quit watching because of it!

  • @toolboy1000
    @toolboy1000 6 років тому

    And did you even check your

  • @robbeck5380
    @robbeck5380 6 років тому +6

    We’re not little kids don’t need the music it sucks