Still helpful even though the video is 2 years old. Just had to adjust my valves at 19k on my 2020 R6 even though owner's manual said it would need to be done at 26,600. Thanks for the video.
(Knock-knock-knock) its Yamaha open up we hear you were doing a valve adjustment hahaha nah that was an epic clip you got strate back to it barely lost any time that was massive, my old man mentioned it costs about a grand to get a shop todo this with the shims an tolerance etc but I dont think i would trust a shop not attaching any of the paint work or fairing not to mention damaging any parts so I'm defo loving this content man keep it up I'm gonna bringe all you content you have up tomorrow when I wake up lol this was awesome advice glad to see somebodys out their trying to help out in that regard cheers man
Hey bro cool video. I wanted to know because i did valve adjustment like 43k km. Now on 46k i did oil and filter change. I have the same issue as soon as i did oil change. It idles but in stationary so it stays like 1200 than it drops to 1000 but in a bit and goes back up. What to do at this point because i dont know.
I am having the same issue w idle and pulling in the clutch- the bike will die on me. It is cold outside. I have a 2000 Yamaha R6, you think this would fix the issue for me?
Heyy, Thanks for this video! My ‘14 R6 is having issue when it’s completely warmed up it starts rough idling between 1-2.5k rpm. This is the second time it’s happened. Once before I got the fuel injectors cleaned and throttle body synced, changed all the ignition coils and spark plugs worked fine for like 5k km’s. However it’s started to rough idle again. Didn’t clean/change the fuel pump at all. Do you think it’s because of the bad fuel pump? I am genuinely fed up with Yamaha
My 06 r6 stalls out when i am warming it up until it gets to 160 degrees but is fine after warm up the shop told me valves wouldn’t do that why they wouldn’t check the valves for me is beyond me that’s money for them i have been stuck for a year on this problem i Wonder if it’s the valves or fuel pump or something
I've adjusted valves so many times on my 05 R1, 09R1 and 07 R6. The concept is the same but Yamaha definitely does it differently with each bike. Something that I've always found unclear with my 07 R6 is right underneath the horizontal line on the Crank Sprocket is a T mark. When setting TDC I can never remember if I should be lining up the horizontal line with the marks on the frame or if I should be lining up the T with the mark on the frame. Every time I come back to adjust the valves on my R6 I'm like wait.... which one did I use last time? I think I use the horizontal line not the "T". Does anyone know what that T mark on the Pickup Rotor? It doesn't exist on any of my other Yamaha Pickup Rotors so I've never been sure what its purpose is.
I did the valve adjustment on my bike and change the tensioner but now when I turn it on just start giving it gas like someone holding the throttle help??
I’m looking at buying an 07 R6 with 7,000 miles. The guy says it’ll start but shuts off. He thinks it’s the fuel cutoff relay. He said he can hear it click and shut off. But sounds to me like if the valves were out it wouldn’t start at all. I’d appreciate any help.
I’m having somewhat the same problem. Bike turns on but the idle sound is very off. It’s very hard to take off in the first gear like no matter how much throttle I give it the bike just jerks/stalls and dies. I asked in an R6 forum and everyone pointed to bad spark plugs or coils. What do you think? (08 R6 with 18k miles)
My 2014 has rattling sounds similar to what you're saying. I haven't been able to pin point where it's coming from. It only rattles for a few seconds in 1st gear only in very low rpms around 1000-1500. Anything over 2k rpm the bike runs strong and no rattling. Do you think it could be the same cam chain tensioner issue??
hey, I’m looking at a 2016 r6 w/ a power commander and other stuff for $7k, it has 15k miles and hasn’t been rode in 3 months..would this be a good buy or do you think it has issues? Thanks!
Still helpful even though the video is 2 years old. Just had to adjust my valves at 19k on my 2020 R6 even though owner's manual said it would need to be done at 26,600. Thanks for the video.
Having the same issues, might try to do this myself. Costs at lot at shops. Thanks a ton man!
(Knock-knock-knock) its Yamaha open up we hear you were doing a valve adjustment hahaha nah that was an epic clip you got strate back to it barely lost any time that was massive, my old man mentioned it costs about a grand to get a shop todo this with the shims an tolerance etc but I dont think i would trust a shop not attaching any of the paint work or fairing not to mention damaging any parts so I'm defo loving this content man keep it up I'm gonna bringe all you content you have up tomorrow when I wake up lol this was awesome advice glad to see somebodys out their trying to help out in that regard cheers man
This is awesome thanks for this handy info man have saved it to my Yamaha R6 playlist for future reference once I have brought mine 💜💙
Hey bro cool video. I wanted to know because i did valve adjustment like 43k km. Now on 46k i did oil and filter change. I have the same issue as soon as i did oil change. It idles but in stationary so it stays like 1200 than it drops to 1000 but in a bit and goes back up. What to do at this point because i dont know.
I am having the same issue w idle and pulling in the clutch- the bike will die on me. It is cold outside. I have a 2000 Yamaha R6, you think this would fix the issue for me?
Heyy, Thanks for this video!
My ‘14 R6 is having issue when it’s completely warmed up it starts rough idling between 1-2.5k rpm. This is the second time it’s happened. Once before I got the fuel injectors cleaned and throttle body synced, changed all the ignition coils and spark plugs worked fine for like 5k km’s. However it’s started to rough idle again. Didn’t clean/change the fuel pump at all.
Do you think it’s because of the bad fuel pump?
I am genuinely fed up with Yamaha
Did you figure it out?
My 06 r6 stalls out when i am warming it up until it gets to 160 degrees but is fine after warm up the shop told me valves wouldn’t do that why they wouldn’t check the valves for me is beyond me that’s money for them i have been stuck for a year on this problem i Wonder if it’s the valves or fuel pump or something
Did you ever figure it out? I have the same problem
i did it was the valve were too tight i’m doing them now
@@12oklochs did it fix it? i have an 07 r6 and just got my ecu flashed but my idle keeps dying till the bike is warm around 150-160
@@n54. yea it was the valves as soon as i did them bike ran great it’s a yamaha r6 thing valves get tight fast on these bikes
I've adjusted valves so many times on my 05 R1, 09R1 and 07 R6. The concept is the same but Yamaha definitely does it differently with each bike. Something that I've always found unclear with my 07 R6 is right underneath the horizontal line on the Crank Sprocket is a T mark. When setting TDC I can never remember if I should be lining up the horizontal line with the marks on the frame or if I should be lining up the T with the mark on the frame. Every time I come back to adjust the valves on my R6 I'm like wait.... which one did I use last time? I think I use the horizontal line not the "T". Does anyone know what that T mark on the Pickup Rotor? It doesn't exist on any of my other Yamaha Pickup Rotors so I've never been sure what its purpose is.
I did the valve adjustment on my bike and change the tensioner but now when I turn it on just start giving it gas like someone holding the throttle help??
How much do you turn the crank for checking clearance on cylinders #2 #3 & #4??
I’m looking at buying an 07 R6 with 7,000 miles. The guy says it’ll start but shuts off. He thinks it’s the fuel cutoff relay. He said he can hear it click and shut off. But sounds to me like if the valves were out it wouldn’t start at all. I’d appreciate any help.
I’m having somewhat the same problem. Bike turns on but the idle sound is very off. It’s very hard to take off in the first gear like no matter how much throttle I give it the bike just jerks/stalls and dies. I asked in an R6 forum and everyone pointed to bad spark plugs or coils. What do you think? (08 R6 with 18k miles)
Exactly how mine is right it’s a 05
My 2014 has rattling sounds similar to what you're saying. I haven't been able to pin point where it's coming from. It only rattles for a few seconds in 1st gear only in very low rpms around 1000-1500. Anything over 2k rpm the bike runs strong and no rattling. Do you think it could be the same cam chain tensioner issue??
@@thegoldbarron9504 waw bless you for this info, and also is this an easy fix?
hey, I’m looking at a 2016 r6 w/ a power commander and other stuff for $7k, it has 15k miles and hasn’t been rode in 3 months..would this be a good buy or do you think it has issues? Thanks!
My boy
I have that issue with my bike now , is it hard to fix??
What would it mean if my bike idles high and cold start and operating temperature??
@@thegoldbarron9504 2006 yamaha r6 (not the r6s model) and yea on cold start it sits at 3500-4000 then when it warms up it sits at 2000
@@TheLukestahhboy pretty sure u have a bad injector
Audio is too low