【ESR】How to install the Matte/ Paper-Like/ PET Screen Protector

Поділитися
Вставка
  • Опубліковано 28 жов 2024

КОМЕНТАРІ • 69

  • @borisklimov1030
    @borisklimov1030 3 роки тому +26

    It worked fine for me. Today I applied it to my 12.9 pro. It was pretty tough, as there were many small dust pieces I got from my fabric mouse pad, I had to catch them with that small sticky tape from the set. And the result is perfect! That's why I strongly recommend to prepare your room and the nearby working surfaces before this operation, especially if this is your first time. Cheers!

  • @rt6490
    @rt6490 3 роки тому +58

    Not even kidding I was using the film on the screen protector for over a month and was wondering why wouldn't it feel like paper until I saw this 😅

    • @nil_oh17
      @nil_oh17 2 роки тому +2

      Dang! Hahahha

  • @Mike-hu8yz
    @Mike-hu8yz Рік тому

    Installed this about 3 months ago and thought it was poor for the description. A little shiny too with loads of scratches. After seeing this video I checked and sure enough the top installation sheet was still there. SMFH. After peeling it off I'm over the moon with the look and feel. Don't know how I could have overlooked this final step but I did. Thought I was smart but turns out I was wrong (again). Sorted now. Out.

  • @M4G1XAL
    @M4G1XAL 4 роки тому +55

    very helpful vid thank you, i was reading the manual going “what..? wh-what”

    • @itsdafapati
      @itsdafapati 4 роки тому

      Galuh Mawarni yahaaahaha. I have bought it twice lol

    • @peipeigacha
      @peipeigacha 2 роки тому

      same lmfao

  • @singaming6707
    @singaming6707 3 роки тому +31

    Used same protector, did everything as in the video. Got a lot, a lot of bubbles.

    • @pol_nem
      @pol_nem 3 роки тому

      Thanks! I thought it was just me

    • @rishavpatel2164
      @rishavpatel2164 3 роки тому +1

      But mine went perfect

  • @CreachterZ
    @CreachterZ 3 роки тому +14

    If you actually want to teach folks how to install this try explaining the steps and doing it in real-time. That would be much appropriated.

  • @sumyatnoe2831
    @sumyatnoe2831 3 роки тому +5

    Helpful but while peeling the second half, the first part came unstuck as well. Ended up with several small bubbles :(

    • @livem7678
      @livem7678 3 роки тому

      Exactly, I got the same experience

    • @chvdu
      @chvdu 3 роки тому +1

      Same with mine

    • @sumyatnoe2831
      @sumyatnoe2831 3 роки тому

      @@chvdu ​@livem I fixed mine by peeling it halfway and using tape to remove the dust particles that had become stuck on the sticky side of the protector. hope that works for you too :)

    • @isabelweiss6411
      @isabelweiss6411 3 роки тому

      @@sumyatnoe2831 hi! How did you remove it halfway? I can’t with mine because it won’t lift

  • @CP_Singh251
    @CP_Singh251 3 роки тому +3

    I did myself on my ipad...after watching yr video...but luckily no bubble...smoothly n clean set...Anyway,Thank U so much👍❣

    • @csbclinic7050
      @csbclinic7050 3 роки тому

      Damn… u did smoothly, well bubbles came for me 😢

  • @-l485
    @-l485 4 роки тому +6

    thank you. this is definitely better than the manual which made me go ????? about the function of the plastic clips

  • @xinghuali2842
    @xinghuali2842 3 роки тому +6

    I'm glad that I have the chance to watch this tutorial first before doing it on my iPad air 4.

  • @uoriwoh
    @uoriwoh 4 роки тому +13

    Few bubbles remained and the top half sticking part failed. However, THANK YOU!

  • @painful1978
    @painful1978 2 роки тому

    Softer covers will get bubbles easily.. Better finding a little bit thicker screen protectors

  • @livem7678
    @livem7678 3 роки тому +4

    I've got so much bubbles on it. The top got peald off and meanwhile some dust got stucked under it. Now I will try to order some different brand. There is a very noticeable grain as well.

  • @akmalzamri8422
    @akmalzamri8422 4 роки тому +3

    Am i supposed to push the clips completely into the charging port? It doesn't fit my iPad Pro 2020 charging port

  • @glydellelozano4965
    @glydellelozano4965 3 роки тому +4

    who else wasted the other screen protector but still end up having bubbles in the 2nd one?

  • @suraja2607
    @suraja2607 2 роки тому +7

    Lmao getting this tutorial after i figured out on my own and perfectly applied my screen protector 🤣🤣
    This tutorial is perfect that's how I did it
    I see many complaining, do it where there is no dust n no wind and take it slow

  • @yurifu
    @yurifu 3 роки тому

    Is the tempered glass one ani-glare? Really want to know this before I buy🙏🏻

    • @girlygamer3346
      @girlygamer3346 3 роки тому

      no, glossy tempered glass is not anti glare

  • @anaguillen4854
    @anaguillen4854 4 роки тому +9

    Does this damage the pencil tip?

    • @anna-mariahjorth6527
      @anna-mariahjorth6527 4 роки тому +4

      Any tablet pen tip will wear down with use, but I don't think this should wear it down any more than regular use unless you're pressing down very hard. A set of 3 new nibs is only like 10$ anyway, so just use your pencil like you normally would without pressing down way too hard on it and you should be fine :) but you will always have to replace tablet pen nibs regardless of whether you use a matte screen protector, the original glass surface etc.

    • @adampat6473
      @adampat6473 4 роки тому +1

      @@anna-mariahjorth6527 this is true but having a matte screen protector wears down pencil faster resulting in you having to replace tips sooner than a regular protector.

  • @Furui93Shin
    @Furui93Shin 4 роки тому +33

    I just wasted mine thank you very much, this installment method sucks.

    • @vadimrob3268
      @vadimrob3268 3 роки тому

      Agree, I installed mine today on an iPad Air 4, the install method is absolutely dumb.

  • @nidhi_khandelwal13
    @nidhi_khandelwal13 3 роки тому

    Is it possible to apply esr paperlike screen protector on esr tempered glass on ipad pro?

    • @ESRGear
      @ESRGear  3 роки тому +1

      Why you wanna put two pieces of screen protectors on one iPad pro?

    • @asimanayak304
      @asimanayak304 3 роки тому +1

      @@ESRGear Matte screen protectors offer little protection. Tempered glass does the job but at the cost of making apple pencil slippery over it.

    • @LinkIsOurChampion
      @LinkIsOurChampion 3 роки тому

      @@asimanayak304 hi~ just add a cover for the tip of the pencil man. They can create the friction you want.
      Or a shockproof cover for iPad and the paper screen protector.

  • @noone7411
    @noone7411 4 роки тому +4

    Do you guys recommend this? Is it too rough?

    • @radkakopecka
      @radkakopecka 4 роки тому +2

      I don't recommend it at all - the display quality goes rapidly low, it's like watching it through water. Moreover, the instalation is not comfortable either.

    • @noone7411
      @noone7411 4 роки тому

      Radka Kopecká really!! I actually got used to glass screen protector it's smooth but it feels nice

    • @radkakopecka
      @radkakopecka 4 роки тому

      ozrine better than nothing, right? I'm glad you're satisfied :) I got a different paper-like protector and I really like it, too!

    • @noone7411
      @noone7411 4 роки тому

      Radka Kopecká it is better than nothing 😂 I don’t think I could compromise the screen quality

    • @kaewaru
      @kaewaru 4 роки тому +1

      @@radkakopecka hai can i ask you what brand that u recommend? i just bought my ipad and i am really confused in choosing paper-like knockoffs cause i will be using this ipad mainly for drawing. thank u sm!!

  • @kuroneko8646
    @kuroneko8646 3 роки тому +6

    I should’ve watch this before installing... now i have to buy another one 😭

  • @veritablyferal6509
    @veritablyferal6509 3 роки тому

    Does it go well with Logitech crayon?

  • @lancey6332
    @lancey6332 2 роки тому +1

    Just here watching how to put screen protector because im stupid af

  • @wilxcast1289
    @wilxcast1289 3 роки тому

    Most difficult things ive done HAHAHAH have a few bubbles but its okay

  • @salmanvalimahmed
    @salmanvalimahmed 4 роки тому +8

    This method is too convoluted.. I have see easier with 3 stickers and works a charm

  • @rishavpatel2164
    @rishavpatel2164 3 роки тому

    Best protector , be careful while applying

  • @MoonlightGlimmer
    @MoonlightGlimmer 4 роки тому +1

    I struggled with this. The parts to remove and keep were confusing, guys put it on 0.5 speed to slow it down.

  • @telepathicfish1489
    @telepathicfish1489 3 роки тому +1

    WARNING: don't press the tool down too far or it'll be a real bitch to remove.

  • @Chot-pd5eb
    @Chot-pd5eb 3 роки тому

    This is so fucked up, i cracked up both

  • @vievedejoy
    @vievedejoy 4 роки тому

    So helpful thank you!

  • @scrutinity6774
    @scrutinity6774 4 роки тому +7

    Anyone who reads this, DO NOT BUY IT, Its like looking through water, the whole screen is RGB, would not even pay a single cent for it, hope i prevent you from buying this piece of garbage

    • @scrutinity6774
      @scrutinity6774 4 роки тому

      052AparnaKalarickalNarayanan , yeah i too bought it seeing reviews of youtubers, but it turns out that even the product comments have the same problem as me, if you cherish the quality of the screen then i highly recommend not buying it, the counterpart “paperlike” is good tho

  • @vadimrob3268
    @vadimrob3268 3 роки тому +9

    Stay away, screen protector is very bad. The install method is designed very poorly. The top part detached hard, when the protector is flipped it gathers dust that comes right on your screen after you just wiped it clean. Then cleaning accessories are very small and for an average man sized hand pretty hard to use without accidentally smearing the screen when using them. Lastly the application was not bubble free, considerable amounts of bubbles and no side ears for lifting the protector and remove the dust particles after installation. Also the protector is mate yes, but it adds horrible pixelation to the screen like any $5 screen protector. It makes your beautiful iPad screen with retina resolution look worse than an iPad 1st generation with low resolution. It's basically impossible to edit photos with it or do any graphic design work. Only possible thing I can think about, artistically that you can do with it with no problem is sketching, the rest absolute garbage. I'll try to raise awareness of this awful product on as much social media as possible. Don't want you guys to waste your hard earned money on this scam of a product. Peace.

    • @axelio5187
      @axelio5187 3 роки тому +2

      Wish that I seen this comment before buying it, i just sent some money in the trash with this product, very awful to apply and it made the screen to look so bad..

  • @ashishrao3069
    @ashishrao3069 3 роки тому +3

    fantastic waste of money!

    • @ESRGear
      @ESRGear  3 роки тому

      Hey Ashish, We're sad to see your comment.😔I’m sorry you are not satisfied with the product. We want to make this right, can you plz DM us on IG with your product feedback so I will pass along your feedback to our design team. Hope you have a good one!

  • @taragada8105
    @taragada8105 3 роки тому

    Wow

  • @klaus4795
    @klaus4795 Рік тому

    الذنوب ي اخواننن الطنوببب في اغاني