Of the white wires by the fuse box, how did you work out which wire was the reverse wire? I have several white wires. A really fat one and a few other smaller ones. Many thanks.
Nice, we did the same on my Trafic, used a wire coat hanger to feed it down the rear door panel and then through the flexi conduit, found the wiring loom and tapped into it right where the conduit brings the cables into the van. Also ran the live for the monitor from the back too to save taking the headliner down as the cables were long enough
2:12 Top tip 1: I didn't need to take off the top light cluster I was able to feed some TV coax cable, which is stiff allowing yo to push it, through that rubber ducting into the van. Top tip 2: I sprayed the cable with some cooking oil and it slid in nicely and never played hard to get. :)
Hiya,when you did this did you put both power and reverse detection wire o to this? I've tried finding the correct reverse wire but it's not any of the normal colours at the front.
@@BuiltnotBoughtCampers similar to yours mate, the reverse cam that fits behind the top brake light lens, planning on wiring it to like 5 or 7 inch screen, electrics have never been my thing but il definitely have to order some of them fuses you was using
I had 3 in mine aswell first one didn't work so I crimped it back together then cut into another one to try and that one worked so maybe just try one of the others
Of the white wires by the fuse box, how did you work out which wire was the reverse wire? I have several white wires. A really fat one and a few other smaller ones. Many thanks.
Nice, we did the same on my Trafic, used a wire coat hanger to feed it down the rear door panel and then through the flexi conduit, found the wiring loom and tapped into it right where the conduit brings the cables into the van. Also ran the live for the monitor from the back too to save taking the headliner down as the cables were long enough
They are good cameras I was surprised
got a trafic myself , so you wired the live from camera and monitor into the reverse light live yes? also do you have a link for these cameras?
@@BuiltnotBoughtCampers very impressed with mine, nice and clear
2:12 Top tip 1: I didn't need to take off the top light cluster I was able to feed some TV coax cable, which is stiff allowing yo to push it, through that rubber ducting into the van. Top tip 2: I sprayed the cable with some cooking oil and it slid in nicely and never played hard to get. :)
Did you disconnect the battery for all of this installing the wiring etc
Hiya,when you did this did you put both power and reverse detection wire o to this? I've tried finding the correct reverse wire but it's not any of the normal colours at the front.
I only put the reverse wire
Hi
Where did you get the camera kit from? Thank you
Brilliant video again, one question have you ever changed the gear stick knob
No that's one job I have never done
Well done nice work 👏
Thank you so much
Hi not very good with electrics is the fuse needed or can I just solder a 3 way power supply?
I would always place an inline fuse if you cant connect it to the main fuse box, what system have you got or planning to get?
@@BuiltnotBoughtCampers similar to yours mate, the reverse cam that fits behind the top brake light lens, planning on wiring it to like 5 or 7 inch screen, electrics have never been my thing but il definitely have to order some of them fuses you was using
Ok but why turns on only when you put the gear on reverse? Wouldn't it be better to be always on?
Hi can I talk to you if you are taking on vans to fit one of these camera I’ve already brought one but want someone to fit
How is your camera power lead so long the one I got is 1m long and the red and black cable as so thin 🤔
I used an extension kit as they are always so short
@NAKED BIKER I did yeah where are you trying to power it from ?
I had 3 in mine aswell first one didn't work so I crimped it back together then cut into another one to try and that one worked so maybe just try one of the others
KTM 690?
I have a Nissan Primastar where did you get the step from
custo.er supplied the step
Where did you get the step from
The customer provided it to me to fit for him