Back in the 70's I had a friend that had a car just like that one, only it was red with a white top. I spent a few hours of my life in it.. A couple of years ago at MOKAN's Mopars invade, there was a couple of early 60's Lancers with slant sixes that both ran N/A in the 11's Thats the only time I've seen them but the cars were well known in the drag racing world then.
I'm a bit of a sucker for the early A's. Had a bunch of 'em over the years. Never a drop top though. One day... It'll be just fine ridin' back to Texas.
Needs extractor . The 225 60 thou over higher compression 350 choke delete. Index the plus ajust the rocker with a bit more thou . Bloke that worked at Chrysler who raced slants in South Australia gave us these tips use the 323 rear end is 👌. In the small Valiants with out going stupid will sort out lots of brand X V8s also some dizzy modes . Yes you can do more but this easily make a big difference carbs and exhaust make a big differents .👌🇦🇺✌️.
Very cool. Just knocking them out. When is the extreme 318 build happening or turbo something or another happening? Something is coming I know it. lol. Have a great day Joe!
Yeah if Jamie can get past the fuel injection it seems no one has an easy time w them you'd think a blow thru. Setup would take a lot of issues out of the equation no ??
@@glennmanchester5696 or just v8 swap it and make enough power to pass a dump truck on flat ground lol instead of the headache and still not being able to pass the dump truck
Thanks for sharing. I put a lot of tricks into that engine.
Thanks, I appreciate it, man!
What tricks ??
Very nice little Dart Joe.
Gilbert should be happy.
Very clean car.
Thanks for sharing. 👍
Thanks buddy, it’s definitely a gem!
Cool little car!👍
Thanks, I’m excited to get this thing on the road!
Good looking old cruiser 👍👍👍👍
For sure! I’ve got to put some miles down before his long ride
Sweet little cruising Street Car. Hope mine sounds that good going down the highway when it’s done.🦶🏾
Let’s be real…it can’t beat the slant, but I’ll be your car will sound just fine 😆👍🇺🇸
@@Mike-Olds-1 😬😆🤣
Thanks! I love the sound of these engines.
Bigfoot he knows you’ve got a street car
Should be fun with the 2 barrel slant
Thanks brother
Love the variety and content in your videos Joe. Your skill set is impressive! Keep them coming!
Appreciate that, man! It's been fun!
Pretty nice rig, everybody loves a /6. Keep up the good content Joe.
Appreciate it buddy, glad you enjoyed the video.
Joe brother very nice those slant 6s look real good with triple 2bl weber side drafts on them
Thanks Grand!
Nice video, Joe! Loves those old Mopars. Very sweet 'lil slanty!
Super sanitary engine compartment. Sweet Dart, always loved those early A bodies, they look cool and are stone axe reliable. Great video, Joe!.
Really nice car, everything mechanical looks excellent to me. Thanks for taking us along for the ride brother 😊👏👏
It's definitely coming together! Glad you're enjoying it!
Careful of that neck snapping torque when engaging/adjusting the transmission kick down. 😆👍🇺🇸
I know, that thing can really get going!
What a nice and fun build
Sounds like a nice little slant, purrs like a kitten.
Yeah, it’s the perfect setup for a daily driver!
Back in the 70's I had a friend that had a car just like that one, only it was red with a white top. I spent a few hours of my life in it.. A couple of years ago at MOKAN's Mopars invade, there was a couple of early 60's Lancers with slant sixes that both ran N/A in the 11's Thats the only time I've seen them but the cars were well known in the drag racing world then.
Thanks for sharing!
That's a very nice little rig!
It’s a fun one to cruise in for sure
Thanks for the video. The siphon trick alone was worth the watch.
Awesome!
Nice car 😊
Thanks, it's getting there!
The Slanted Sled :D Great runner Joe.
Thanks man, she's a runner for sure!
Cool car!
Nice car.... good content...thanks Joe...🔧🔧👍
Thanks man! Glad you're enjoying the build!
I really enjoyed this. I'm impressed how nice that car sounds. it's always nice workingg on a clean car 🙂
Thanks man, it's getting there!
Great video Joe. That's a super clean little Dart.
Thanks buddy!
Great work! I was always amazed at the reliability and longevity of these motors. The valves are so tiny!
Thanks! It’s amazing how much they can take, too.
Saucy!!
🍗
Sounds pretty good lol
What a great little cream puff!
Glad you think so! She's got a lot of heart.
power steering, automatic, padded dash, radio & heater, remote mirror... and a 2 barrel. It's going to be a great little car for another 75 years.
@@HelpingHand-ic4wt absolutely 👍🏼
cool, crazy how far that valve cover is off to one side
It is pretty slanted!
Vote Mopar 2024!!!!!!
@@HelpingHand-ic4wt to the front!
not bad , yea I like it .
Nice old car !!! Simpler time 👍
Yeah, times were a little simpler, but man this is a fun little car!
Nice car! Did Gilbert sell the Coronet, or is he just adding to his collection?
Nice 63 dart. Those speedo cables were notorious for leaking. There is a seal inside the speedo gear that can be replaced. Brewers has them.
I’ll check it out. It looks like the pan was a little damp, but it hasn’t dripped yet
I'm a bit of a sucker for the early A's. Had a bunch of 'em over the years. Never a drop top though. One day...
It'll be just fine ridin' back to Texas.
Yea buddy!
6 cylinders never sound great but that doesn’t sound bad with the new bigger exhaust 👍
It’s got that classic slant 6 sound!
A radiator repair shop can vat that tank and it will come out looking like new.
Needs extractor . The 225 60 thou over higher compression 350 choke delete. Index the plus ajust the rocker with a bit more thou . Bloke that worked at Chrysler who raced slants in South Australia gave us these tips use the 323 rear end is 👌. In the small Valiants with out going stupid will sort out lots of brand X V8s also some dizzy modes . Yes you can do more but this easily make a big difference carbs and exhaust make a big differents .👌🇦🇺✌️.
Thanks for sharing! It’s a fun one
Very cool. Just knocking them out. When is the extreme 318 build happening or turbo something or another happening? Something is coming I know it. lol. Have a great day Joe!
I’ll have to build a slant turbo to race Jamie with! 😂
Yeah if Jamie can get past the fuel injection it seems no one has an easy time w them you'd think a blow thru. Setup would take a lot of issues out of the equation no ??
@@glennmanchester5696 or just v8 swap it and make enough power to pass a dump truck on flat ground lol instead of the headache and still not being able to pass the dump truck
Do you ever add an overflow tank to the cooling system of old vehicles like this that didn’t come with them?
A RECOVERY bottle or tank.
Yes I always do to mine. I will ask if he wants one
Nice slant 6 140hp,Pentastar 290hp,hurricane 500hp viva the 6 cylinder power.
Yeah, the 6 cylinder power is pretty awesome!
💪🏻💪🏻💪🏻
Thanks brother
sweet little car !!! Just-Slow-Joe ???? 😅
It's definitely not a screamer, but it's fun to drive. 😎
@@JustMoparJoe That can be said about every car I have 🙂
AHH.. the infamous slut 6! That"s a sweet cruiser. I love doing jobs like that .Make something nice just alittle bit better.
Yeah, it's a solid little engine!
Hey, near where I live.
Right down the road!
😎👍🇺🇸
Thanks John
Let er rip
Yea buddy
I would say those slant 6s sound like sewing machines. But that would be insulting to sewing machines....lol
@@tonyb3864 😂 yea probably closer to a power unit than a sewing machine