With everything else on sale right now the savings arent that much. If you buy it all seperate its about $80 more. Basically with the kit you get the air filter free. Can get upmap and stacks for $960. But awesome video showing the results. I actually just ordered the upmap and exhaust for my '23 RSV4. Held off on the stacks for the moment but im sure ill be getting them sooner or later. I opted for some stealth mirrors. Wasnt sure if I wanted the stacks or the mirrors first but ultimately chose the mirrors. Crazy how expensive the rizoma mirrors are. Stacks are like $40 cheaper...
Yes with items individually on sale its only $90 savings. But on regular price its $200 in savings. Stealth mirrors are freaking expensive. I’m putting priority on other parts before I consider the mirrors. I never used the stealth on my RS660 anyway. They were always on the down position. But they come in handy when you need them. ✌️
Here's my feedback! 1st thanks for all your videos with respects to all your new mods! Nicely done! Now you talk about increasing your hp and how that would reflect your time on the track. However it's not only the increase in hp but also the weight loss of both the old exhaust plus the servo motor. This in itself will shave off your lap time. 🏁 🏍 ✌️
@@jonnyversteeg3445 Actually not at all. It’s surprising how much the exhaust does not affect the boot. It’s only when I place my foot on the ground on a stop, that the exhaust on idle hits my calf. But on idle it’s not hot enough or long enough to affect it either.
Really like the channel, patience, just enough detail so I can understand. But, your doing the big boy version & focusing on the track. Mine will be - at best - once a year to the track. Also, street HP 100 is fine- we use so little at the edge. I really like the velocity stacks & possibly smoother, higher air flow from the air filter! I don't want to tune it to an inch of its life.
100hp is great for the street! But tuning the bike actually gives it life and not pushing it to its edge of life. It will perform better and more efficient.
I wonder how much more power you could get with a longer exhaust. Seems like the little stubby cans never put out as much power as an Akrapovic or similar. Love the weight savings, sound and look of the GP22 though.
Hey mate ive just subbed unreal video Quick question. If i was to run titanium headers on this bike from say arkopovic, say the $5500 full system with headers than even swap out to a sc project can Would the titanium headers themselves add a few more HP? Or hard to tell Also if i was to go a -1 +1 520 chain on a RSV4 how would that hold up to a 23 s1k m side by side?
Thank you! I can’t speak for compatibility between Akra and SC as I haven’t confirmed that. But titanium headers would probably give you one extra horsepower. Nothing crazy. If you’re not racing it’s not worth the cost. I’ve ridden an S1k and it felt sluggish compared to the RSV4. For me the RSV4 is a rocket as it is but a lot of people claim that changing to 520 chain with taller gearing makes the bike 1000 times better. I’m going to do this mod soon. When I do I’ll make a video on this subject.
I put in stacks and saw no difference right after installing and putting the bike on the dyno. Did you ride yours after the stack install then dyno later. I am wondering if the map needs to bake in. Thx
I felt no difference when I took the bike out for a ride. But when I reviewed the videos of before and after the bike would accelerate a lot faster. It does make a big difference but it’s not enough where you would feel it on your hands. You would see it on the lap timer for sure though.
It looks like you tuned before stacks and after stacks. We’re you running the shorty map before stacks? Did you feel a significant difference between that and stock? How about the difference between pre and post stacks and stacks map?
I actually tuned it only once at the same time I installed the stacks. I just did two separate recordings. So I went from riding it completely stock, to riding it with a GP22-Velocity Stacks-Map-Filter at once. I didn’t feel much on my hands regarding power, but when I timed the acceleration there was a significant difference.
@@ALFAVITAGA thanks for the update man! I’ve used one of these t800’s on my last Ducati. I know Gabro has a name in the Aprilia world, but why did you decide upmap over like bt moto?
@@nikkotulloch9497 When I entered the Aprilia world with my RS660, I had no information on ECU tuning and aftermarket supply options. In search of both, I found that Gabro was holding the title in the Aprilia world. So as you mentioned, the number one reason was popularity. The second reason was feedback from reputable vendors. They all recommended Gabro over Aprilia Race ECU, but no one ever mentioned BT Moto. When I purchased my RSV4, thats when I learned about BT Moto. I heard great feedback on BT Moto, but I felt invested already in Gabros maps, as I was a bit biased based on reputation and the fact that I have great communication with Gabriel over DMs and social media forums on support that is not only related to tuning and maps but general valuable information on overall mechanical engineering. Having that support, I was naturally inclined. And of course the undisputed fact that Gabriel is one of the top Aprilia tuners out there. Price is also a big factor. For a tune-stacks-filter package, BT is priced at $1400, whereas I paid something around $900-950 for the Gabro combo. Some claim that with a BT combo you will gain more HP. But for me HP is not the number one factor of choice. Overall engine reliability, proper QS tuning, radiator fan tuning, emissions bypass, etc, takes priority over power. Im not implying that BT Moto does not offer all that. All Im saying is that my personal lack of knowledge in BT Moto, steered me to Gabro. Who knows, maybe my next bike will be tuned by BT Moto.
Oh damn! Good looking bike man! I actually have carbon frame and swingarm covers waiting to be installed. The belly/wing decal and carbon tank decal should be standard on the grey RSV4. Its such a no brainer. Looks so much better. ✌️
Fake numbers, fake results. Single gear pulls are bulls*it as are any numbers off a dynojet dyno, AFR tuning is bulls*it all the popping and flame shows that. The number 202 is wrong. Subtract 30%. When you dyno you looking for BEST power ACROSS the gear box and rpm range. That bike does not make 195 stock, not even close. Bulls*it
I have a Gabro tuned Rsv4 and you really can feel that extra midrange punch.
Gabro knows his stuff 😉🤌
Thats a nice power curve. Good torque too.
It’s a beast 🔥
👏🏼👏🏼👏🏼 Nice video! Thanks for the comparison! 🔥🔥
💯👌✌️
Damn son I am saving for an rsv4 too! Congrats!
💯 Go for it ✌️
With everything else on sale right now the savings arent that much. If you buy it all seperate its about $80 more. Basically with the kit you get the air filter free. Can get upmap and stacks for $960. But awesome video showing the results. I actually just ordered the upmap and exhaust for my '23 RSV4. Held off on the stacks for the moment but im sure ill be getting them sooner or later. I opted for some stealth mirrors. Wasnt sure if I wanted the stacks or the mirrors first but ultimately chose the mirrors. Crazy how expensive the rizoma mirrors are. Stacks are like $40 cheaper...
Yes with items individually on sale its only $90 savings. But on regular price its $200 in savings. Stealth mirrors are freaking expensive. I’m putting priority on other parts before I consider the mirrors. I never used the stealth on my RS660 anyway. They were always on the down position. But they come in handy when you need them. ✌️
thats why i buy the China copies. same damn thing for $30 and no issues in 3+ years
Thats bad ass! Team Aprilia
💯👌✌️🔥
Here's my feedback! 1st thanks for all your videos with respects to all your new mods! Nicely done! Now you talk about increasing your hp and how that would reflect your time on the track. However it's not only the increase in hp but also the weight loss of both the old exhaust plus the servo motor. This in itself will shave off your lap time. 🏁 🏍 ✌️
Thank you! Weight reduction is always a huge plus in performance increase. I would take weight loss over HP any day. ✌️
One last thing...Does your break boot heat up from your SC shorty exhaust? 🤔🫠
@@jonnyversteeg3445 Actually not at all. It’s surprising how much the exhaust does not affect the boot. It’s only when I place my foot on the ground on a stop, that the exhaust on idle hits my calf. But on idle it’s not hot enough or long enough to affect it either.
Dream superbike! Best sounding!
💯👌✌️
Really like the channel, patience, just enough detail so I can understand. But, your doing the big boy version & focusing on the track. Mine will be - at best - once a year to the track. Also, street HP 100 is fine- we use so little at the edge. I really like the velocity stacks & possibly smoother, higher air flow from the air filter! I don't want to tune it to an inch of its life.
100hp is great for the street! But tuning the bike actually gives it life and not pushing it to its edge of life. It will perform better and more efficient.
Where did you get the rsv4 Factory belly decals? Great looking bike man!
I ordered them directly from my dealer at Moto Club Santa Monica but AF1 Racing also sells them online.
I wonder how much more power you could get with a longer exhaust. Seems like the little stubby cans never put out as much power as an Akrapovic or similar. Love the weight savings, sound and look of the GP22 though.
Probably around 2whp more. For me sound and looks is what I was going for. At 200+whp a couple more don’t mean much unless you’re racing.
Hey mate ive just subbed unreal video
Quick question. If i was to run titanium headers on this bike from say arkopovic, say the $5500 full system with headers than even swap out to a sc project can
Would the titanium headers themselves add a few more HP? Or hard to tell
Also if i was to go a -1 +1 520 chain on a RSV4 how would that hold up to a 23 s1k m side by side?
Thank you! I can’t speak for compatibility between Akra and SC as I haven’t confirmed that. But titanium headers would probably give you one extra horsepower. Nothing crazy. If you’re not racing it’s not worth the cost. I’ve ridden an S1k and it felt sluggish compared to the RSV4. For me the RSV4 is a rocket as it is but a lot of people claim that changing to 520 chain with taller gearing makes the bike 1000 times better. I’m going to do this mod soon. When I do I’ll make a video on this subject.
How’s it been on the street sound wise regarding the boys in blue, I ask because I’m going back and forth on keeping it when I move back out your way.
Its too freaking loud. Its an absolute reason to be pulled over. But so far the blue boys could care less. Time will show lol.
Did you do any partial throttle runs on the dyno? 20%, 40%, 60%, 80% throttle?
No partial throttle.
Would be nice to see what the 60-130 is via dragy.
I’ll make one ✌️
I put in stacks and saw no difference right after installing and putting the bike on the dyno. Did you ride yours after the stack install then dyno later. I am wondering if the map needs to bake in. Thx
I felt no difference when I took the bike out for a ride. But when I reviewed the videos of before and after the bike would accelerate a lot faster. It does make a big difference but it’s not enough where you would feel it on your hands. You would see it on the lap timer for sure though.
It looks like you tuned before stacks and after stacks. We’re you running the shorty map before stacks? Did you feel a significant difference between that and stock? How about the difference between pre and post stacks and stacks map?
I actually tuned it only once at the same time I installed the stacks. I just did two separate recordings. So I went from riding it completely stock, to riding it with a GP22-Velocity Stacks-Map-Filter at once. I didn’t feel much on my hands regarding power, but when I timed the acceleration there was a significant difference.
@@ALFAVITAGA thanks for the update man! I’ve used one of these t800’s on my last Ducati. I know Gabro has a name in the Aprilia world, but why did you decide upmap over like bt moto?
@@nikkotulloch9497 When I entered the Aprilia world with my RS660, I had no information on ECU tuning and aftermarket supply options. In search of both, I found that Gabro was holding the title in the Aprilia world. So as you mentioned, the number one reason was popularity. The second reason was feedback from reputable vendors. They all recommended Gabro over Aprilia Race ECU, but no one ever mentioned BT Moto. When I purchased my RSV4, thats when I learned about BT Moto. I heard great feedback on BT Moto, but I felt invested already in Gabros maps, as I was a bit biased based on reputation and the fact that I have great communication with Gabriel over DMs and social media forums on support that is not only related to tuning and maps but general valuable information on overall mechanical engineering. Having that support, I was naturally inclined. And of course the undisputed fact that Gabriel is one of the top Aprilia tuners out there. Price is also a big factor. For a tune-stacks-filter package, BT is priced at $1400, whereas I paid something around $900-950 for the Gabro combo. Some claim that with a BT combo you will gain more HP. But for me HP is not the number one factor of choice. Overall engine reliability, proper QS tuning, radiator fan tuning, emissions bypass, etc, takes priority over power. Im not implying that BT Moto does not offer all that. All Im saying is that my personal lack of knowledge in BT Moto, steered me to Gabro. Who knows, maybe my next bike will be tuned by BT Moto.
Have you melted any shoes or boots with that exhaust? I really want it for my 23' but dont want to melt all my shoes lmao
Zero issues with shoes! Go for it ✌️
Similar with tuono v4 , but for street better is Akra. In the city, in the traffic I think long Akra is the right choice. I do this....
Longer exhaust is definitely a better option for performance
@@ALFAVITAGAThis exhaust is a BEAST.....a longer one would be better ⁉️
How many miles do you have on your bike
I don’t remember exactly. Less than 2k miles.
@@ALFAVITAGA gotcha
look almost like my bike with belly pan/wing decal
Oh damn! Good looking bike man! I actually have carbon frame and swingarm covers waiting to be installed. The belly/wing decal and carbon tank decal should be standard on the grey RSV4. Its such a no brainer. Looks so much better. ✌️
@@ALFAVITAGA indeed 🤙🏽I saw in other video you ordered matte carbon . Can’t wait to see the final result. I wish I went with matte instead gloss
@@calRSV4 Ill upload a video installing them soon ✌️
230HP???
At the crank yes. But at the wheel 200+
Hahahhahaaaaa
Fake numbers, fake results.
Single gear pulls are bulls*it as are any numbers off a dynojet dyno, AFR tuning is bulls*it all the popping and flame shows that.
The number 202 is wrong. Subtract 30%.
When you dyno you looking for BEST power ACROSS the gear box and rpm range. That bike does not make 195 stock, not even close.
Bulls*it
Sure..